scholarly journals Enhanced Photocatalytic and Antimicrobial Performance of Cuprous Oxide/Titania: The Effect of Titania Matrix

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2069 ◽  
Author(s):  
Marcin Janczarek ◽  
Maya Endo ◽  
Dong Zhang ◽  
Kunlei Wang ◽  
Ewa Kowalska
Keyword(s):  
Cuprous Oxide ◽  
Low Cost ◽  
Antimicrobial Properties ◽  
Solar Irradiation ◽  
Photocatalytic Efficiency ◽  
Methanol Dehydrogenation ◽  
Reaction Systems ◽  
Antimicrobial Performance ◽  
Uv Visible

A simple, low-cost method was applied to prepare hybrid photocatalysts of copper (I) oxide/titania. Five different TiO2 powders were used to perform the study of the effect of titania matrix on the photocatalytic and antimicrobial properties of prepared nanocomposites. The photocatalytic efficiency of such a dual heterojunction system was tested in three reaction systems: ultraviolet-visible (UV-Vis)-induced methanol dehydrogenation and oxidation of acetic acid, and 2-propanol oxidation under visible light irradiation. In all the reaction systems considered, the crucial enhancement of photocatalytic activity in relation to corresponding bare titania was observed. The reaction mechanism for a specific reaction and the influence of titania matrix were discussed. Furthermore, antimicrobial (bactericidal and fungicidal) properties of Cu2O/TiO2 materials were analyzed. The antimicrobial activity was found under UV, visible and solar irradiation, and even for dark conditions. The origin of antimicrobial properties with emphasis on the role of titania matrix was also discussed.

Liquid-liquid extraction of succinate using a dicopper cryptate

2020 ◽  
Author(s):  
Riccardo Mobili ◽  
Sonia La Cognata ◽  
Francesca Merlo ◽  
Andrea Speltini ◽  
Massimo Boiocchi ◽  
...  
Keyword(s):  
Aqueous Phase ◽  
Visible Spectrum ◽  
Tca Cycle ◽  
Residual Concentration ◽  
Waste Products ◽  
Liquid Liquid Extraction ◽  
The Tca Cycle ◽  
Quantitative Extraction ◽  
Uv Visible

<div> <p>The extraction of the succinate dianion from a neutral aqueous solution into dichloromethane is obtained using a lipophilic cage-like dicopper(II) complex as the extractant. The quantitative extraction exploits the high affinity of the succinate anion for the cavity of the azacryptate. The anion is effectively transferred from the aqueous phase, buffered at pH 7 with HEPES, into dichloromethane. A 1:1 extractant:anion adduct is obtained. Extraction can be easily monitored by following changes in the UV-visible spectrum of the dicopper complex in dichloromethane, and by measuring the residual concentration of succinate in the aqueous phase by HPLC−UV. Considering i) the relevance of polycarboxylates in biochemistry, as e.g. normal intermediates of the TCA cycle, ii) the relevance of dicarboxylates in the environmental field, as e.g. waste products of industrial processes, and iii) the recently discovered role of succinate and other dicarboxylates in pathophysiological processes including cancer, our results open new perspectives for research in all contexts where selective recognition, trapping and extraction of polycarboxylates is required. </p> </div>

Understanding the Role of Chlorine and Ozone to Control Postharvest Diseases in Fruit and Vegetables: A Review

2020 ◽  
Vol 16 (4) ◽  
pp. 455-461
Author(s):  
Gabriela M. Baia ◽  
Otniel Freitas-Silva ◽  
Murillo F. Junior
Keyword(s):  
Chlorine Dioxide ◽  
Broad Spectrum ◽  
Fruits And Vegetables ◽  
Low Cost ◽  
Residual Effects ◽  
Pathogenic Microorganisms ◽  
Postharvest Diseases ◽  
Post Harvest ◽  
By Products

Fruits and vegetables are foods that come into contact with various types of microorganisms from planting to their consumption. A lack or poor sanitation of these products after harvest can cause high losses due to deterioration and/ or pathogenic microorganisms. There are practically no post-harvest fungicides or bactericides with a broad spectrum of action that have no toxic residual effects and are safe. However, to minimize such problems, the use of sanitizers is an efficient device against these microorganisms. Chlorine is the most prevalent sanitizing agent because of its broad spectrum, low cost and well-established practices. However, the inevitable formation of disinfection by-products, such as trihalomethanes (THMs) and haloacetic acids (HAAs), is considered one of the main threats to food safety. Alternative sanitizers, such as chlorine dioxide (ClO2) and ozone, are becoming popular as a substitute for traditional post-harvest treatments. Thus, this review addresses the use of chlorine, chlorine dioxide and ozone emphasizing aspects, such as usage, safe application, spectrum of action and legislation. In order to ensure the quality and safety of final products, the adoption of well-prepared sanitation and sanitation programs for post-harvest fruits and vegetables is essential.

scholarly journals Vanadium doped CaTiO3 cuboids: Role of vanadium in improving the photocatalytic activity

2021 ◽  
Author(s):  
Harsha Bantawal ◽  
Sandhya U. Shenoy ◽  
Denthaje Krishna Bhat
Keyword(s):  
Photocatalytic Activity ◽  
Water Splitting ◽  
Dye Degradation ◽  
Low Cost ◽  
Physicochemical Stability ◽  
Photocatalytic Dye Degradation

CaTiO3 has attracted enormous interest in the field of photocatalytic dye degradation and water splitting owing to its low cost, excellent physicochemical stability and structural tunability. Herein, we have developed...

scholarly journals Do Institutional Transplants Succeed? Regulating Raiffeisen Cooperatives in South India, 1930–1960

2021 ◽  
pp. 1-27
Author(s):  
Maanik Nath
Keyword(s):  
South India ◽  
Financial Regulation ◽  
Low Cost ◽  
Credit Market ◽  
Rural Credit ◽  
Market State ◽  
The Government ◽  
Political Economic ◽  
Rural Credit Market

The government in British-ruled India established cooperative banks to compete with private moneylenders in the rural credit market. State officials expected greater competition to increase the supply of low-cost credit, thereby expanding investment potential for the rural poor. Cooperatives did increase credit supply but captured a small share of the credit market and reported net losses throughout the late colonial and early postcolonial period. The article asks why this experiment did not succeed and offers two explanations. First, low savings restricted the role of social capital and mutual supervision as methods of financial regulation in the cooperative sector. Second, a political-economic ideology that privileged equity over efficiency made for weak administrative regulation.

scholarly journals Current role of ultrasound in hemodialysis access evaluation

2021 ◽  
pp. 112972982110346
Author(s):  
Meola Mario ◽  
Jose Ibeas ◽  
Jan Malik
Keyword(s):  
Turning Point ◽  
Point Of Care ◽  
Low Cost ◽  
Wireless Systems ◽  
Future Perspectives ◽  
Maturation Period ◽  
Surveillance Programs ◽  
Dialysis Nurses

Physical examination (PE) is considered the backbone before vascular access (VA) placement, during maturation period and for follow-up. However, it may be inadequate in identifying suitable vasculature, mainly in comorbid patients, or in detecting complications. This review highlights the advantages of ultrasound imaging to manage VA before placement, during maturation and follow-up. Furthermore, it analyses the future perspectives in evaluating early and late VA complications thank to the availability of multiparametric platforms, point of care of ultrasound, and portable/wireless systems. Technical improvements and low-cost systems should favor the widespread ultrasound-based VA surveillance programs. This significant turning point needs an adequate training of nephrologists and dialysis nurses and the standardization of exams, parameters, and procedures.

scholarly journals Towards a Glass New World: The Role of Ion-Exchange in Modern Technology

2021 ◽  
Vol 11 (10) ◽  
pp. 4610
Author(s):  
Simone Berneschi ◽  
Giancarlo C. Righini ◽  
Stefano Pelli
Keyword(s):  
Ion Exchange ◽  
Communication Networks ◽  
High Speed ◽  
High Performance ◽  
Low Cost ◽  
Modern Technology ◽  
Historical Background ◽  
Wide Range ◽  
Happy Marriage

Glasses, in their different forms and compositions, have special properties that are not found in other materials. The combination of transparency and hardness at room temperature, combined with a suitable mechanical strength and excellent chemical durability, makes this material indispensable for many applications in different technological fields (as, for instance, the optical fibres which constitute the physical carrier for high-speed communication networks as well as the transducer for a wide range of high-performance sensors). For its part, ion-exchange from molten salts is a well-established, low-cost technology capable of modifying the chemical-physical properties of glass. The synergy between ion-exchange and glass has always been a happy marriage, from its ancient historical background for the realisation of wonderful artefacts, to the discovery of novel and fascinating solutions for modern technology (e.g., integrated optics). Getting inspiration from some hot topics related to the application context of this technique, the goal of this critical review is to show how ion-exchange in glass, far from being an obsolete process, can still have an important impact in everyday life, both at a merely commercial level as well as at that of frontier research.

scholarly journals Solar Thermochemical Hydrogen Production in the USA

2021 ◽  
Vol 13 (14) ◽  
pp. 7804
Author(s):  
Christoph Falter ◽  
Andreas Sizmann
Keyword(s):  
Hydrogen Production ◽  
Large Scale ◽  
Low Cost ◽  
The United States ◽  
Solar Irradiation ◽  
Transport Sector ◽  
Fossil Energy ◽  
The Us ◽  
The Usa ◽  
Solar Thermochemical

Hydrogen produced from renewable energy has the potential to decarbonize parts of the transport sector and many other industries. For a sustainable replacement of fossil energy carriers, both the environmental and economic performance of its production are important. Here, the solar thermochemical hydrogen pathway is characterized with a techno-economic and life-cycle analysis. Assuming a further increase of conversion efficiency and a reduction of investment costs, it is found that hydrogen can be produced in the United States of America at costs of 2.1–3.2 EUR/kg (2.4–3.6 USD/kg) at specific greenhouse gas emissions of 1.4 kg CO2-eq/kg. A geographical potential analysis shows that a maximum of 8.4 × 1011 kg per year can be produced, which corresponds to about twelve times the current global and about 80 times the current US hydrogen production. The best locations are found in the Southwest of the US, which have a high solar irradiation and short distances to the sea, which is beneficial for access to desalinated water. Unlike for petrochemical products, the transport of hydrogen could potentially present an obstacle in terms of cost and emissions under unfavorable circumstances. Given a large-scale deployment, low-cost transport seems, however, feasible.

Thermal conversion of CBD grown ZnS thin films to ZnO

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Kooliyankal Naseema ◽  
Kaniyamkandy Ribin ◽  
Nidiyanga Navya ◽  
Prasoon Prasannan
Keyword(s):  
Thin Films ◽  
Low Cost ◽  
Thermal Conversion ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Glass Substrates ◽  
Anion Substitution ◽  
Nano Crystalline ◽  
Before And After ◽  
Uv Visible

AbstractNano crystalline zinc sulfide thin films were deposited onto glass substrates by chemical bath deposition method. One of the samples was annealed at 300 °C for 2 h in air using a muffle furnace. The prepared thin films were investigated by X-ray diffraction (XRD), UV–visible spectroscopy (UV–vis), photoluminescence spectroscopy (PL), scanning electron microscopy (SEM) and Raman spectroscopy (FT-R) studies before and after annealing. The analysis confirmed the thermal-induced anion substitution and conversion of ZnS crystal to ZnO wurtzite crystal. XRD pattern showed that these films were phase pure and polycrystalline in nature. Optical band gap was found to be 3.86 eV for ZnS and 3.21 eV for ZnO. The films prepared by this simple, low-cost technique are suitable for photovoltaic and optoelectronic applications.

Sign in / Sign up

Export Citation Format

Share Document