scholarly journals Conformally Gated Surface Conducting Behaviors of Single-Walled Carbon Nanotube Thin-Film-Transistors

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3361
Author(s):  
Kyung-Tae Kim ◽  
Keon Woo Lee ◽  
Sanghee Moon ◽  
Joon Bee Park ◽  
Chan-Yong Park ◽  
...  
Keyword(s):  
Field Effect ◽  
Carrier Transport ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Cost Effective ◽  
Electrical Performance ◽  
Solution Synthesis ◽  
Large Area ◽  
Element Analysis ◽  
Single Walled Carbon

Semiconducting single-walled carbon nanotubes (s-SWCNTs) have gathered significant interest in various emerging electronics due to their outstanding electrical and mechanical properties. Although large-area and low-cost fabrication of s-SWCNT field effect transistors (FETs) can be easily achieved via solution processing, the electrical performance of the solution-based s-SWCNT FETs is often limited by the charge transport in the s-SWCNT networks and interface between the s-SWCNT and the dielectrics depending on both s-SWCNT solution synthesis and device architecture. Here, we investigate the surface and interfacial electro-chemical behaviors of s-SWCNTs. In addition, we propose a cost-effective and straightforward process capable of minimizing polymers bound to s-SWCNT surfaces acting as an interfering element for the charge carrier transport via a heat-assisted purification (HAP). With the HAP treated s-SWCNTs, we introduced conformal dielectric configuration for s-SWCNT FETs, which are explored by a carefully designed wide array of electrical and chemical characterizations with finite-element analysis (FEA) computer simulation. For more favorable gate-field-induced surface and interfacial behaviors of s-SWCNT, we implemented conformally gated highly capacitive s-SWCNT FETs with ion-gel dielectrics, demonstrating field-effect mobility of ~8.19 cm2/V⋅s and on/off current ratio of ~105 along with negligible hysteresis.

scholarly journals Nanonet: Low-temperature-processed tellurium nanowire network for scalable p-type field-effect transistors and a highly sensitive phototransistor array

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Naqi ◽  
Kyung Hwan Choi ◽  
Hocheon Yoo ◽  
Sudong Chae ◽  
Bum Jun Kim ◽  
...  
Keyword(s):  
Low Temperature ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistors ◽  
Optical Measurements ◽  
Electrical Performance ◽  
Large Area ◽  
Nanowire Network ◽  
P Type ◽  
Nanowire Networks

AbstractLow-temperature-processed semiconductors are an emerging need for next-generation scalable electronics, and these semiconductors need to feature large-area fabrication, solution processability, high electrical performance, and wide spectral optical absorption properties. Although various strategies of low-temperature-processed n-type semiconductors have been achieved, the development of high-performance p-type semiconductors at low temperature is still limited. Here, we report a unique low-temperature-processed method to synthesize tellurium nanowire networks (Te-nanonets) over a scalable area for the fabrication of high-performance large-area p-type field-effect transistors (FETs) with uniform and stable electrical and optical properties. Maximum mobility of 4.7 cm2/Vs, an on/off current ratio of 1 × 104, and a maximum transconductance of 2.18 µS are achieved. To further demonstrate the applicability of the proposed semiconductor, the electrical performance of a Te-nanonet-based transistor array of 42 devices is also measured, revealing stable and uniform results. Finally, to broaden the applicability of p-type Te-nanonet-based FETs, optical measurements are demonstrated over a wide spectral range, revealing an exceptionally uniform optical performance.

scholarly journals All-Organic, Low Voltage, Transparent and Compliant Organic Field-Effect Transistor Fabricated by Means of Large-Area, Cost-Effective Techniques

2020 ◽  
Vol 10 (19) ◽  
pp. 6656
Author(s):  
Stefano Lai ◽  
Giulia Casula ◽  
Pier Carlo Ricci ◽  
Piero Cosseddu ◽  
Annalisa Bonfiglio
Keyword(s):  
Field Effect ◽  
Low Voltage ◽  
Field Effect Transistors ◽  
High Mobility ◽  
Chemical Vapor ◽  
Cost Effective ◽  
Large Area ◽  
Parylene C ◽  
Biomedical Sensing ◽  
Novel Applications

The development of electronic devices with enhanced properties of transparency and conformability is of high interest for the development of novel applications in the field of bioelectronics and biomedical sensing. Here, a fabrication process for all organic Organic Field-Effect Transistors (OFETs) by means of large-area, cost-effective techniques such as inkjet printing and chemical vapor deposition is reported. The fabricated device can operate at low voltages (as high as 4 V) with ideal electronic characteristics, including low threshold voltage, relatively high mobility and low subthreshold voltages. The employment of organic materials such as Parylene C, PEDOT:PSS and 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS pentacene) helps to obtain highly transparent transistors, with a relative transmittance exceeding 80%. Interestingly enough, the proposed process can be reliably employed for OFET fabrication over different kind of substrates, ranging from transparent, flexible but relatively thick polyethylene terephthalate (PET) substrates to transparent, 700-nm-thick, compliant Parylene C films. OFETs fabricated on such sub-micrometrical substrates maintain their functionality after being transferred onto complex surfaces, such as human skin and wearable items. To this aim, the electrical and electromechanical stability of proposed devices will be discussed.

Organic Materials for Multifunctional Transistor-Based Devices

2002 ◽  
Vol 725 ◽  
Author(s):  
H.E. Katz ◽  
T. Someya ◽  
B. Crone ◽  
X.M. Hong ◽  
M. Mushrush ◽  
...  
Keyword(s):  
Field Effect ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Organic Field Effect Transistors ◽  
Large Area ◽  
Microprocessor Technology ◽  
Silicon Based ◽  
Electronic Ink ◽  
Made In ◽  
Charge Channel

Organic field-effect transistors (OFETs) are “soft material” versions of accumulationmode silicon-based FETs, where a gate field across a dielectric induces a conductive charge channel at the interface of the dielectric with a semiconductor, between source and drain electrodes. Charge carrier mobilities >0.01 and on/off ratios >10,000 are routinely obtained, adequate for a few specialized applications such as electrophoretic pixel switches but well below standards established for silicon microprocessor technology. Still, progress that has been made in solution-phase semiconductor deposition and the printing of contacts and dielectrics stimulates the development of OFET circuits for situations where extreme low cost, large area, and mechanical flexibility are important. Circuits with hundreds of OFETs have been demonstrated and a prototype OFETcontrolled black-on-white “electronic ink” sign has been fabricated.

scholarly journals Printed, cost-effective and stable poly(3-hexylthiophene) electrolyte-gated field-effect transistors

2020 ◽  
Vol 8 (43) ◽  
pp. 15312-15321
Author(s):  
Davide Blasi ◽  
Fabrizio Viola ◽  
Francesco Modena ◽  
Axel Luukkonen ◽  
Eleonora Macchia ◽  
...  
Keyword(s):  
Field Effect ◽  
Field Effect Transistor ◽  
Field Effect Transistors ◽  
Cost Effective ◽  
Continuous Operation ◽  
Large Area ◽  
Ink Jet ◽  
Effect Transistor

A large-area processable ink-jet-printed poly(3-hexylthiophene) electrolyte-gated field-effect transistor, designed for bioelectronic applications, is proven to be stable for one week of continuous operation.

Organic field-effect transistors based on tetrathiafulvalene derivatives

2008 ◽  
Vol 80 (11) ◽  
pp. 2405-2423 ◽  
Author(s):  
Xike Gao ◽  
Wenfeng Qiu ◽  
Yunqi Liu ◽  
Gui Yu ◽  
Daoben Zhu
Keyword(s):  
Thin Film ◽  
Single Crystal ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Device Fabrication ◽  
Organic Field Effect Transistors ◽  
Large Area ◽  
Solution Processed

In recent years, tetrathiafulvalene (TTF) and its derivatives have been used as semiconducting materials for organic field-effect transistors (OFETs). In this review, we summarize the recent progress in the field of TTF-based OFETs. We introduce the structure and operation of OFETs, and focus on TTF derivatives used in OFETs. TTF derivatives used in OFETs can be divided into three parts by the semiconductor's morphology and the device fabrication technique: (1) TTF derivatives used for single-crystal OFETs, (2) TTF derivatives used for vacuum-deposited thin-film OFETs, and (3) TTF derivatives used for solution-processed thin-film OFETs. The single-crystal OFETs based on TTF derivatives were fabricated by drop-casting method and showed high performance, with the mobility up to 1.4 cm2/Vs. The vacuum-deposited thin-film OFETs based on TTF derivatives were well developed, some of which have shown high performance comparable to that of amorphous silicon, with good air-stability. Although the mobilities of most solution-processed OFETs based on TTF derivatives are limited at 10-2 cm2/Vs, the study on solution-processable TTF derivatives and their devices are promising, because of their low-cost, large-area-coverage virtues. The use of organic charge-transfer (OCT) compounds containing TTF or its derivatives in OFETs is also included in this review.

Two-step direct heteroarylation reaction towards 2,5-bis(alkoxy)benzene polymer for organic field-effect transistors processed with tetrahydrofuran

2021 ◽  
pp. 2150014
Author(s):  
Xiangyu Hao ◽  
Yu Tang ◽  
Bili Zhu ◽  
Yanlian Lei ◽  
Ping Deng
Keyword(s):  
Field Effect ◽  
Carrier Transport ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Organic Field Effect Transistors ◽  
Oriented Polymer ◽  
Transport Characteristic ◽  
Text Type ◽  
Polymer Semiconductor ◽  
Top Contact

A 2,5-bis(alkoxy)benzene polymer POB-TNT has been newly designed and synthesized via very convenient two-step direct heteroarylation reaction. Its physicochemical properties have been investigated. POB-TNT demonstrates typical [Formula: see text]-type carrier transport characteristic in unencapsulated bottom-gate and top-contact organic field-effect transistors (OFETs) processed with relatively green tetrahydrofuran solvent. The results highlight a readily accessible and low-cost-oriented polymer semiconductor for non-halogenated solvent-processed OFET application.

scholarly journals Experimental and molecular dynamics studies of an ultra-fast sequential hydrogen plasma process for fabricating phosphorene-based sensors

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
M. Rajabali ◽  
H. Asgharyan ◽  
V. Fadaei Naeini ◽  
A. Boudaghi ◽  
B. Zabihi ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Molecular Dynamics ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Hydrogen Plasma ◽  
Device Fabrication ◽  
Dynamics Simulation ◽  
Red Phosphorus ◽  
Large Area ◽  
Low Concentration

AbstractLow concentration phosphorene-based sensors have been fabricated using a facile and ultra-fast process which is based on an exfoliation-free sequential hydrogen plasma treatment to convert the amorphous phosphorus thin film into mono- or few-layered phosphorene sheets. These sheets have been realized directly on silicon substrates followed by the fabrication of field-effect transistors showing the low leakage current and reasonable mobility for the nano-sensors. Being capable of covering the whole surface of the silicon substrate, red phosphorus (RP) coated substrate has been employed to achieve large area phosphorene sheets. Unlike the available techniques including mechanical exfoliation, there is no need for any exfoliation and/or transfer step which is significant progress in shortening the device fabrication procedure. These phosphorene sheets have been examined using transmission electron microscopy (TEM), Scanning electron microscopy (SEM), Raman spectroscopy and atomic-force microscopy (AFM). Electrical output in different states of the crystallization as well as its correlation with the test parameters have been also extensively used to examine the evolution of the phosphorene sheets. By utilizing the fabricated devices, the sensitivity of the phosphorene based-field effect transistors to the soluble L-Cysteine in low concentrations has been studied by measuring the FET response to the different concentrations. At a gate voltage of − 2.5 V, the range of 0.07 to 0.60 mg/ml of the L-Cysteine has been distinguishably detected presenting a gate-controlled sensor for a low-concentration solution. A reactive molecular dynamics simulation has been also performed to track the details of this plasma-based crystallization. The obtained results showed that the imparted energy from hydrogen plasma resulted in a phase transition from a system containing red phosphorus atoms to the crystal one. Interestingly and according to the simulation results, there is a directional preference of crystal growth as the crystalline domains are being formed and RP atoms are more likely to re-locate in armchair than in zigzag direction.

Sign in / Sign up

Export Citation Format

Share Document