scholarly journals Isolation and Structural Elucidation of New Amphidinol Analogues from Amphidinium carterae Cultivated in a Pilot-Scale Photobioreactor

Marine Drugs ◽  
2021 ◽  
Vol 19 (8) ◽  
pp. 432
Author(s):  
Adrián Morales-Amador ◽  
Alejandro Molina-Miras ◽  
Lorenzo López-Rosales ◽  
Asterio Sánchez-Mirón ◽  
Francisco García-Camacho ◽  
...  
Keyword(s):  
High Performance ◽  
Bubble Column ◽  
Feeding Strategy ◽  
Downstream Processing ◽  
Pilot Scale ◽  
Culture Broth ◽  
Commercial Development ◽  
Batch Mode ◽  
Amphidinium Carterae ◽  
Relative Configuration

The demand for valuable products from dinoflagellate biotechnology has increased remarkably in recent years due to their many prospective applications. However, there remain many challenges that need to be addressed in order to make dinoflagellate bioactives a commercial reality. In this article, we describe the technical feasibility of producing and recovering amphidinol analogues (AMs) excreted into a culture broth of Amphidinium carterae ACRN03, successfully cultured in an LED-illuminated pilot-scale (80 L) bubble column photobioreactor operated in fed-batch mode with a pulse feeding strategy. We report on the isolation of new structurally related AMs, amphidinol 24 (1, AM24), amphidinol 25 (2, AM25) and amphidinol 26 (3, AM26), from a singular fraction resulting from the downstream processing. Their planar structures were elucidated by extensive NMR and HRMS analysis, whereas the relative configuration of the C-32®C-47 bis-tetrahydropyran core was confirmed to be antipodal in accord with the recently revised configuration of AM3. The hemolytic activities of the new metabolites and other related derivatives were evaluated, and structure–activity conclusions were established. Their isolation was based on a straightforward and high-performance bioprocess that could be suitable for the commercial development of AMs or other high-value compounds from shear sensitive dinoflagellates.

Morphology of High-Performance Rigid-Rod Polymer Fibers and Molecular Composites

1989 ◽  
Vol 47 ◽  
pp. 338-339
Author(s):  
W.W. Adams ◽  
S. J. Krause
Keyword(s):  
Tensile Strength ◽  
High Performance ◽  
Liquid Crystalline ◽  
Molecular Level ◽  
Synergistic Effects ◽  
Tensile Modulus ◽  
Commercial Development ◽  
The Matrix ◽  
Molecular Composites ◽  
Rigid Rod

Rigid-rod polymers such as PBO, poly(paraphenylene benzobisoxazole), Figure 1a, are now in commercial development for use as high-performance fibers and for reinforcement at the molecular level in molecular composites. Spinning of liquid crystalline polyphosphoric acid solutions of PBO, followed by washing, drying, and tension heat treatment produces fibers which have the following properties: density of 1.59 g/cm3; tensile strength of 820 kpsi; tensile modulus of 52 Mpsi; compressive strength of 50 kpsi; they are electrically insulating; they do not absorb moisture; and they are insensitive to radiation, including ultraviolet. Since the chain modulus of PBO is estimated to be 730 GPa, the high stiffness also affords the opportunity to reinforce a flexible coil polymer at the molecular level, in analogy to a chopped fiber reinforced composite. The objectives of the molecular composite concept are to eliminate the thermal expansion coefficient mismatch between the fiber and the matrix, as occurs in conventional composites, to eliminate the interface between the fiber and the matrix, and, hopefully, to obtain synergistic effects from the exceptional stiffness of the rigid-rod molecule. These expectations have been confirmed in the case of blending rigid-rod PBZT, poly(paraphenylene benzobisthiazole), Figure 1b, with stiff-chain ABPBI, poly 2,5(6) benzimidazole, Fig. 1c A film with 30% PBZT/70% ABPBI had tensile strength 190 kpsi and tensile modulus of 13 Mpsi when solution spun from a 3% methane sulfonic acid solution into a film. The modulus, as predicted by rule of mixtures, for a film with this composition and with planar isotropic orientation, should be 16 Mpsi. The experimental value is 80% of the theoretical value indicating that the concept of a molecular composite is valid.

scholarly journals Controlling Unconventional Secretion for Production of Heterologous Proteins in Ustilago maydis through Transcriptional Regulation and Chemical Inhibition of the Kinase Don3

2021 ◽  
Vol 7 (3) ◽  
pp. 179
Author(s):  
Kai P. Hussnaetter ◽  
Magnus Philipp ◽  
Kira Müntjes ◽  
Michael Feldbrügge ◽  
Kerstin Schipper
Keyword(s):  
Protein Production ◽  
Heterologous Protein ◽  
Ustilago Maydis ◽  
Downstream Processing ◽  
Culture Broth ◽  
Yeast Cells ◽  
Heterologous Protein Expression ◽  
Heterologous Proteins ◽  
Regulatory Systems ◽  
Unconventional Secretion

Heterologous protein production is a highly demanded biotechnological process. Secretion of the product to the culture broth is advantageous because it drastically reduces downstream processing costs. We exploit unconventional secretion for heterologous protein expression in the fungal model microorganism Ustilago maydis. Proteins of interest are fused to carrier chitinase Cts1 for export via the fragmentation zone of dividing yeast cells in a lock-type mechanism. The kinase Don3 is essential for functional assembly of the fragmentation zone and hence, for release of Cts1-fusion proteins. Here, we are first to develop regulatory systems for unconventional protein secretion using Don3 as a gatekeeper to control when export occurs. This enables uncoupling the accumulation of biomass and protein synthesis of a product of choice from its export. Regulation was successfully established at two different levels using transcriptional and post-translational induction strategies. As a proof-of-principle, we applied autoinduction based on transcriptional don3 regulation for the production and secretion of functional anti-Gfp nanobodies. The presented developments comprise tailored solutions for differentially prized products and thus constitute another important step towards a competitive protein production platform.

Control of Aspergillus flavus and aflatoxin production with spices in culture medium and rice

2013 ◽  
Vol 6 (1) ◽  
pp. 43-50 ◽  
Author(s):  
V. Aiko ◽  
A. Mehta
Keyword(s):  
Aspergillus Flavus ◽  
High Performance ◽  
Fungal Growth ◽  
Aflatoxin Production ◽  
Culture Broth ◽  
Minimum Inhibitory Concentrations ◽  
Food Grains ◽  
Star Anise ◽  
Aflatoxin B ◽  
Layer Chromatography

Cinnamon, cardamom, star anise and clove were studied for their effect on growth of Aspergillus flavus and aflatoxin B1 (AFB1) synthesis. The experiments were carried out in yeast extract sucrose culture broth as well as in rice supplemented with spices. AFB1 produced was analysed qualitatively and quantitatively using thin layer chromatography and high performance liquid chromatography, respectively. At a concentration of 10 mg/ml, cardamom and star anise did not exhibit any antifungal or anti-aflatoxigenic activity in culture broth, whereas cinnamon and clove inhibited A. flavus growth completely. The minimum inhibitory concentrations of cinnamon and clove were 4 and 2 mg/ml, respectively. Concentrations of cinnamon and clove below their minimum inhibitory concentrations showed enhanced fungal growth, while AFB1 synthesis was reduced. Clove inhibited the synthesis of AFB1 significantly up to 99% at concentrations ≥1.0 mg/ml. The spices also inhibited AFB1 synthesis in rice at 5 mg/g, although fungal growth was not inhibited. Clove and cinnamon inhibited AFB1 synthesis significantly up to 99 and 92%, respectively, and star anise and cardamom by 41 and 23%, respectively. The results of this study suggest the use of whole spices rather than their essential oils for controlling fungal and mycotoxin contamination in food grains.

scholarly journals Evaluation of Fixed-Bed Cultures with Immobilized Lactococcus Lactis ssp. Lactis on Different Scales

2017 ◽  
Vol 11 (1) ◽  
pp. 16-25 ◽  
Author(s):  
Rebecca Faschian ◽  
Ilyas Eren ◽  
Steven Minden ◽  
Ralf Pörtner
Keyword(s):  
Dilution Rate ◽  
Lactococcus Lactis ◽  
Scale Up ◽  
Fixed Bed ◽  
Pilot Scale ◽  
Fixed Bed Reactor ◽  
Batch Mode ◽  
Promising Alternative ◽  
Fixed Beds ◽  
Pilot Scale Reactor

Fixed-bed processes, where cells are immobilized within macroporous carriers, are a promising alternative to processes with suspended cells. A scale-up concept is presented in order to evaluate the performance as part of process design of fixed-bed processes. Therefore,Lactococcus lactiscultivation in chemostat and batch mode was compared to fixed bed cultures on three different scales, the smallest being the downscaledMultifermwith 10 mL fixed bed units, the second a 100 mL fixed-bed reactor and the third a pilot scale reactor with 1 L fixed bed volume. As expected, the volume specific lactate productivity of all cultivations was dependent on dilution rate. In suspension chemostat culture a maximum of 2.3 g·L-1·h-1was reached. Due to cell retention in the fixed-beds, productivity increased up to 8.29 g·L-1·h-1at a dilution rate of D = 1.16 h-1(corresponding to 2.4·µmax) on pilot scale. For all fixed bed cultures a common spline was obtained indicating a good scale-up performance.

Hydrodynamics, mixing and mass transfer in a pilot-scale bubble column with dense internals

2019 ◽  
Vol 202 ◽  
pp. 491-507 ◽  
Author(s):  
Felix Möller ◽  
Craig Lavetty ◽  
Eckhard Schleicher ◽  
Martin Löschau ◽  
Uwe Hampel ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Bubble Column ◽  
Pilot Scale

Use of immobilised bacteria for the wastewater treatment – examples from the sugar industry

2006 ◽  
Vol 53 (3) ◽  
pp. 9-15 ◽  
Author(s):  
H.-J. Jördening ◽  
K. Hausmann ◽  
B. Demuth ◽  
M. Zastrutzki
Keyword(s):  
Wastewater Treatment ◽  
High Performance ◽  
Sugar Industry ◽  
Pilot Scale ◽  
Fluidized Bed Reactors ◽  
Reactor Volume ◽  
High Performance Systems ◽  
Pilot Scale Reactor ◽  
Nitrogen Elimination ◽  
Hydrolysis Of

This work focuses on the implementation of high performance systems to the wastewater treatment of sugar factories. For this purpose, systems with immobilised bacteria were studied. For the hydrolysis of organic matter and denitrification, fluidized bed reactors were used. The nitrification was studied with an airlift reactor system. Both hydrolysis and nitrogen elimination were investigated on laboratory and pilot scales in sugar factories. Although with porous materials higher biomass concentrations are attainable for the hydrolysis (up to 55 kg/m3), for economical reasons sand was used (22.5 kg/m3) for the pilot scale-study. With a pilot-scale reactor (volume 1 m3) the maximum sucrose conversion rate achieved with sand in the first campaign was 52 kg/(m3 d). For the nitrogen elimination on the pilot scale, a system with denitrification and nitrification was combined. The highest performance for the nitrification (reactor volume: 0.68 m3) with pumice as support material was 1.2 kg NH4-N/(m3 d), limiting the whole system. The denitrification rate (reactor volume: 0.12 m3) was four times higher (3.5–5 kg NO3-N/(m3 d). Rules of the modelling of the system are discussed.

scholarly journals Investigation of lab and pilot scale electric-pulse fragmentation systems for the recycling of ultra-high performance fibre-reinforced concrete

2018 ◽  
Vol 128 ◽  
pp. 187-194 ◽  
Author(s):  
Kathy Bru ◽  
Solène Touzé ◽  
Pascal Auger ◽  
Svatopluk Dobrusky ◽  
Jérôme Tierrie ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
High Performance ◽  
Electric Pulse ◽  
Pilot Scale ◽  
Fibre Reinforced Concrete ◽  
High Performance Fibre

scholarly journals Production and Optimization of Hermetia illucens (L.) Larvae Reared on Food Waste and Utilized as Feed Ingredient

2020 ◽  
Vol 12 (23) ◽  
pp. 9864
Author(s):  
Anton Gligorescu ◽  
Christian Holst Fischer ◽  
Peter Foged Larsen ◽  
Jan Værum Nørgaard ◽  
Lars-Henrik Lau Heckman
Keyword(s):  
Food Waste ◽  
Management Practices ◽  
Feeding Strategy ◽  
Pilot Scale ◽  
Household Waste ◽  
Feed Conversion ◽  
Feed Ingredient ◽  
Hermetia Illucens ◽  
Waste Management Practices ◽  
Feed Conversion Rate

The feed sector requires new sustainable sources of protein, and at the same time better waste management practices are required to decrease and upcycle post-consumers’ food waste (catering and organic household waste), which is currently used for energy production or discharged as waste. The production of Hermetia illucens larvae (L.) (BSFL) was conducted in 15 batches at pilot scale. Furthermore, a feeding strategy experiment was conducted to optimize feedings and decrease handling, followed by a digestibility study for assessing the applicability of BSFL as a feed ingredient. About 190 kg of food waste was used to produce 79 kg of BSFL. The bioconversion of food waste into BSFL was found to be highly efficient, with feed conversion rate (FCR) values ranging between 1.7 and 3.6, when assessed on dry matter. The feeding experiment showed similar BSFL and insect frass production as well as similar FCR, revealing that a decrease in handling can be obtained if two feeding episodes are used. The digestibility of protein and fat was high at 86.2 and 90.4% and revealed that BSFL meal can be successfully used as a protein and fat source in feed for carnivore animals outside the food chain (e.g., pet food).

Sign in / Sign up

Export Citation Format

Share Document