scholarly journals Muscovite Dehydration Melting in Silica-Undersaturated Systems: A Case Study from Corundum-Bearing Anatectic Rocks in the Dabie Orogen

Minerals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 213 ◽  
Author(s):  
Yang Li ◽  
Yang Yang ◽  
Yi-Can Liu ◽  
Chiara Groppo ◽  
Franco Rolfo
Keyword(s):  
Alkali Feldspar ◽  
White Mica ◽  
Central China ◽  
Coarse Grained ◽  
Depth Interval ◽  
Dehydration Melting ◽  
Dabie Orogen ◽  
Fine Grained ◽  
Isothermal Decompression ◽  
Lower Crustal

Corundum-bearing anatectic aluminous rocks are exposed in the deeply subducted North Dabie complex zone (NDZ), of Central China. The rocks consist of corundum, biotite, K-feldspar and plagioclase, and show clear macro- and micro-structural evidence of anatexis by dehydration melting of muscovite in the absence of quartz. Mineral textures and chemical data integrated with phase equilibria modeling, indicate that coarse-grained corundum in leucosome domains is a peritectic phase, reflecting dehydration melting of muscovite through the reaction: Muscovite = Corundum + K-feldspar + Melt. Aggregates of fine-grained, oriented, corundum grains intergrown with alkali feldspar in the mesosome domains are, instead, formed by the dehydration melting of muscovite with aluminosilicate, through the reaction: Muscovite + Al-silicate = Corundum + K-feldspar + Melt. P-T pseudosections modeling in the Na2O-CaO-K2O-FeO-MgO-Al2O3-SiO2-H2O-TiO2 system constrains peak pressure-temperature (P-T) conditions at 900–950 °C, 9–14 kbar. The formation of peritectic corundum in the studied rocks is a robust petrographic evidence of white mica decompression melting that has occurred during the near-isothermal exhumation of the NDZ. Combined with P-T estimates for the other metamorphic rocks in the area, these new results further confirm that the NDZ experienced a long-lived high-T evolution with a near-isothermal decompression path from mantle depths to lower-crustal levels. Furthermore, our new data suggest that white mica decompression melting during exhumation of the NDZ was a long-lasting process occurring on a depth interval of more than 30 km.

Zircon U–Pb ages, major and trace elements, and Hf isotope characteristics of the Tiantangzhai granites in the North Dabie orogen, Central China: tectonic implications

2013 ◽  
Vol 151 (5) ◽  
pp. 916-937 ◽  
Author(s):  
XIN DENG ◽  
KUNGUANG YANG ◽  
ALI POLAT ◽  
TIMOTHY M. KUSKY ◽  
KAIBIN WU
Keyword(s):  
Partial Melting ◽  
Eastern China ◽  
Major And Trace Elements ◽  
Central China ◽  
Dabie Orogen ◽  
Crustal Rocks ◽  
The North ◽  
Granitic Magmatism ◽  
Two Peaks ◽  
Lower Crustal

AbstractCretaceous granites are widespread in the North Dabie orogen, Central China, but their emplacement sequence and mechanism are poorly known. The Tiantangzhai Complex in the North Dabie Complex is the largest Cretaceous granitic suite consisting of six individual intrusions. In this study, zircon U–Pb ages are used to constrain the crystallization and protolith ages of these intrusions. The Shigujian granite is a syn-tectonic intrusion with an age of 141 Ma. This granite was emplaced under a compressional regime. Oscillatory rims of zircons have yielded two peaks at 137±1 Ma and 125±1 Ma. The 137±1 Ma peak represents the beginning of orogenic extension and tectonic collapse, whereas the 125±1 Ma peak represents widespread granitic magmatism. Zircon cores have yielded concordant ages between 812 and 804 Ma, which indicate a crystallization age for the protolith. The Tiantangzhai granites show relatively high Sr contents and high La/Yb and Sr/Y ratios. The Shigujian granite has positive Eu anomalies resulting from partial melting of a plagioclase-rich source in an over-thickened crust. Correspondingly, in situ Lu–Hf analyses from zircons yield high negative εHf(t) values from −24.8 to −26.6, with two-stage Hf model ages from 2748±34 to 2864±40 Ma, suggesting that the magmas were dominantly derived from partial melting of middle to lower crustal rocks. The Dabie orogen underwent pervasive NW–SE extension at the beginning of the early Cretaceous associated with subduction of the Palaeo-Pacific plate beneath eastern China.

Deformation and reaction fabrics in eclogites from the Western Gneiss Region (Norway) - evidence of dehydration reactions attributed to episodic deformation

2021 ◽  
Author(s):  
Claudia A. Trepmann ◽  
Ane K. Engvik ◽  
Erick G. Prince Gutierrez
Keyword(s):  
Inner Core ◽  
White Mica ◽  
Coarse Grained ◽  
Dislocation Creep ◽  
Western Gneiss Region ◽  
Garnet Porphyroblasts ◽  
Boundary Area ◽  
Fine Grained ◽  
Dehydration Reactions

<p>The eclogites from Vårdalneset, Western Gneiss Region, Norway, show an exceptional large variety of reaction and deformation microfabrics that document the processes and conditions during burial and exhumation. Coarse grained eclogites comprise about 35% omphacite, 25% garnet and 20% amphibole with various amounts of white mica, zoisite, kyanite, rutile, zircon and pyrite. Their fabric is characterized by few mm long and several hundred µm wide amphibole and omphacite grains aligned in the foliation plane with zoned garnet porphyroblasts up to several mm in diameter. In contrast, finer-grained mylonitic eclogites with grain diameters of few hundred µm comprise systematically higher amounts of garnet (45%) and omphacite (35%) and generally less amphibole (< 5%) but similar amounts of zoisite, white mica, rutile and quartz. In the coarse-grained eclogite, amphibole shows evidence of dislocation creep as indicated by undulatory extinction, subgrains and recrystallized grains in necks of boudinaged coarse amphibole layers as well as in contact to garnet. The large garnet porphyroblasts generally show a complex zonation with an inclusion-rich Fe-poor and Mg-rich inner core surrounded by a zone with Fe- and Ca-rich patches and a broad Mg-rich, Ca- and Fe-poor rim. Only at contact to coarse amphibole an additional, a few tens of µm thin serrated rim further enriched in Mg can occur. At the direct contact to such serrated Mg-rich rims, amphibole is partly replaced by a fine-grained quartz-kyanite ± rutile aggregate, indicating dehydration reactions of amphibole. Quartz - kyanite ± rutile aggregates are surrounding garnet also in contact to omphacite, zoisite and to other garnet crystals. The microstructures suggest that deformation and dehydration of amphibole are coupled and played an important role during deformation of the eclogites finally leading to the mylonitic eclogites with higher amounts of garnet and omphacite. Deformation is suggested to have triggered the dehydration reaction by a slight and local increase in temperature. Furthermore, deformation provided additional pathways for the escaping fluids along the increased grain and phase boundary area, as indicated by commonly present quartz within interstitials between recrystallized amphibole grains. In all samples, few µm wide amphibole rims replacing garnets document restricted rehydration-reactions at a later stage. The large variety of the deformation and reaction microfabrics exemplarily show that both deformation and metamorphic reactions did not proceed at long-term continuous conditions, but that both are coupled and occurred episodically.</p>

Electrical conductivity of dry lower crustal rocks

Geophysics ◽  
1983 ◽  
Vol 48 (1) ◽  
pp. 52-61 ◽  
Author(s):  
K. A. Kariya ◽  
T. J. Shankland
Keyword(s):  
Electrical Conductivity ◽  
Coarse Grained ◽  
Mean Values ◽  
Crustal Rocks ◽  
Fine Grained ◽  
Rock Types ◽  
Order Of Magnitude ◽  
Temperature Ranges ◽  
Best Fitting ◽  
Lower Crustal

This study provides values of electrical conductivity of possible lower crustal materials to assist interpretation of lower crustal magnetotelluric soundings. We present mean values of conductivity measurements collected from the literature for dry mafic and silicic rocks in the temperature range of 500°C to 1000°C. We observe statistically significant differences between rock types: mafic rocks are better conductors than granites by about half an order of magnitude and within the mafic group, aphanitic (fine‐grained) rocks have higher conductivity than phaneritic (coarse‐grained) ones. “Best‐fitting” curves of log conductivity versus temperature are presented for each rock type to show mean log conductivity values together with standard deviations so that most probable temperature ranges can be inferred from conductivity. Because the laboratory rocks are dry, their conductivities are lower at a given temperature than they would be if fluids or volatiles were present; hence any temperatures inferred from magnetotelluric (MT) contivities are upper bounds.

scholarly journals Cretaceous structural evolution of the Pelagonian crystalline in western Voras Mt (Macedonia, Northern Greece)

2001 ◽  
Vol 34 (1) ◽  
pp. 129 ◽  
Author(s):  
Α. ΑΥΓΕΡΙΝΑΣ ◽  
Α. ΚΙΛΙΑΣ ◽  
Α. ΚΟΡΩΝΑΙΟΣ ◽  
Δ. ΜΟΥΝΤΡΑΚΗΣ ◽  
W. FRISCH ◽  
...  
Keyword(s):  
Shear Band ◽  
Shear Bands ◽  
Structural Evolution ◽  
White Mica ◽  
Coarse Grained ◽  
Granitic Rocks ◽  
Northern Greece ◽  
Fine Grained ◽  
Crenulation Cleavage ◽  
Single Zircon

The kinematic of the Cretaceous deformation and the relationship between deformation and metamorphism of the Pelagonian crystalline was studied in Voras Mt (northern Greece). The Pelagonian crystalline in this area has been subdivided into a lower, core part, consisting mainly of gneissic rocks and schists and an upper, cover part, consistine of schists and quartzites with marble intercalations. Intensely deformed granitic rocks of Upper Paleozoic age intrude the Pelagonian crystalline basement. An S j foliation is the oldest fabric recognized in the Pelagonian crystalline. Sj is mainly defined by syn-Sjgarnet(Gr1), biotite(Btj), white mica (Wnij), chloritoid, kyanite and plagioclase in the metapelitic rocks and green amphibole, epidote, plagioclase, and biotiteiBtj) in the amphibolite. Garnet grows also in some cases post-kinematically. Ilmenite and tourmaline are often found in the pelitic rocks as well. S is overprinted by an S2 foliation that developed as a crenulation cleavage. In most places, however, S2 has destroyed all earlier fabrics and a single S2 fabric is present related to, isoclinal or sheath folds intrafolial in places. S2 in the metapelitic rocks is characterized by the syn-S2 development of chlorite, white mica(Wm2) and plagioclase. In the amphibolite S2 is mainly defined by the syn-kinematic development of actinolite, plagioclase, biotite(Bt2), white mica(Wm2) and chlorite. During D2 garnet(Gr1) and biotiteiBtj) are partially replaced by chlorite, while green amphibole is replaced by actinolite and chlorite. Chloritoid remains generally stable along the S2-planes but in some places transforms to chlorite and sericite. Furthermore, D2 was locally followed by a static post-kinematic annealing indicated by polygonal quartz microfabrics with equilibrated grain boundaries and triple points. The overall orientation of S2 is dome shaped with a gentle SW-ward and NE-ward dip in the southwestern and northeastern flanks of the dome respectively. Syn-S2 minerals defined a very well exposed NW-SE trending stretching lineation. Kinematic indicators show a main top to the SE sense of movement. An S3 crenulation cleavage associated with asymmetric NW-SE trending folds is also present in most parts of the core and cover rocks, possibly, related to a constrictional type of deformation. A well developed, S4 shear band cleavage is mainly present in the upper parts of the metamorphic dome and formed under cooler conditions. S4 shear bands are associated with a NW-SE developed stretching lineation defined by elongated and dynamically recrystallized quartz grains and a preferred orientation of white mica and chlorite. Along the S4 shear bands a transformation of garnet, biotite, chloritoid and amphibole into chlorite is always observed. S4 shear bands indicate a main top to the SE sense of movement. The P-T metamorphic conditions were derived from textural equilibria and mineral assemblages, as well as from the spatial distribution of the metamorphic minerals. Syn-Dj metamorphism reached the conditions of the boundaries between greenschist and amphibolite facies. Syn-D2 retrogression took place under greenschist facie conditions. K/Ar radiometric datings on coarse-grained syn-St and younger fine-grained syn-S2 micas define an Early Cretaceous cooling age ('135Ma) for the older event and a Mid- to Late Cretaceous age ('90-80Ma) for the second event. A white mica age of ca. 65Ma correlates with S4 shear band clevage. Furthermore, the intrusion age of a granitic body into the Pelagonian crystalline is dated using the Pb/Pb single zircon evaporation method. The estimated intrusion age of 300±3Ma suggests that the Pelagonian crystalline was affected by a pre-kinematic magmatic activity relative to its Cretaceous deformation.

Correlation between dislocation, grain boundary and interface of duplex SS in stress corrosion cracking(SCC)

1990 ◽  
Vol 48 (4) ◽  
pp. 928-929
Author(s):  
Wang Zheng-fang ◽  
Z.F. Wang
Keyword(s):  
Stainless Steel ◽  
Thermal Cycle ◽  
Secondary Phase ◽  
Corrosion Cracking ◽  
Coarse Grained ◽  
Test Environment ◽  
Fine Grained ◽  
Evaluation Test ◽  
Welding Thermal Cycle ◽  
Micro Analysis

The main purpose of this study highlights on the evaluation of chloride SCC resistance of the material,duplex stainless steel,OOCr18Ni5Mo3Si2 (18-5Mo) and its welded coarse grained zone(CGZ).18-5Mo is a dual phases (A+F) stainless steel with yield strength:512N/mm2 .The proportion of secondary Phase(A phase) accounts for 30-35% of the total with fine grained and homogeneously distributed A and F phases(Fig.1).After being welded by a specific welding thermal cycle to the material,i.e. Tmax=1350°C and t8/5=20s,microstructure may change from fine grained morphology to coarse grained morphology and from homogeneously distributed of A phase to a concentration of A phase(Fig.2).Meanwhile,the proportion of A phase reduced from 35% to 5-10°o.For this reason it is known as welded coarse grained zone(CGZ).In association with difference of microstructure between base metal and welded CGZ,so chloride SCC resistance also differ from each other.Test procedures:Constant load tensile test(CLTT) were performed for recording Esce-t curve by which corrosion cracking growth can be described, tf,fractured time,can also be recorded by the test which is taken as a electrochemical behavior and mechanical property for SCC resistance evaluation. Test environment:143°C boiling 42%MgCl2 solution is used.Besides, micro analysis were conducted with light microscopy(LM),SEM,TEM,and Auger energy spectrum(AES) so as to reveal the correlation between the data generated by the CLTT results and micro analysis.

scholarly journals Balanced Sparsity for Efficient DNN Inference on GPU

2019 ◽  
Vol 33 ◽  
pp. 5676-5683 ◽  
Author(s):  
Zhuliang Yao ◽  
Shijie Cao ◽  
Wencong Xiao ◽  
Chen Zhang ◽  
Lanshun Nie
Keyword(s):  
Deep Neural Networks ◽  
General Purpose ◽  
Coarse Grained ◽  
Efficient Computation ◽  
Model Accuracy ◽  
Sparse Model ◽  
Model Inference ◽  
Fine Grained ◽  
Practical Inference ◽  
Speed Up

In trained deep neural networks, unstructured pruning can reduce redundant weights to lower storage cost. However, it requires the customization of hardwares to speed up practical inference. Another trend accelerates sparse model inference on general-purpose hardwares by adopting coarse-grained sparsity to prune or regularize consecutive weights for efficient computation. But this method often sacrifices model accuracy. In this paper, we propose a novel fine-grained sparsity approach, Balanced Sparsity, to achieve high model accuracy with commercial hardwares efficiently. Our approach adapts to high parallelism property of GPU, showing incredible potential for sparsity in the widely deployment of deep learning services. Experiment results show that Balanced Sparsity achieves up to 3.1x practical speedup for model inference on GPU, while retains the same high model accuracy as finegrained sparsity.

scholarly journals Submarine lava deltas of the 2018 eruption of Kīlauea volcano

2021 ◽  
Vol 83 (4) ◽  
Author(s):  
S. Adam Soule ◽  
Michael Zoeller ◽  
Carolyn Parcheta
Keyword(s):  
Grain Size ◽  
Pore Pressure ◽  
Mechanistic Model ◽  
Large Fraction ◽  
Volcanic Hazards ◽  
Lava Flows ◽  
Coarse Grained ◽  
Fine Grained ◽  
Fine Grain ◽  
Delta Formation

AbstractHawaiian and other ocean island lava flows that reach the coastline can deposit significant volumes of lava in submarine deltas. The catastrophic collapse of these deltas represents one of the most significant, but least predictable, volcanic hazards at ocean islands. The volume of lava deposited below sea level in delta-forming eruptions and the mechanisms of delta construction and destruction are rarely documented. Here, we report on bathymetric surveys and ROV observations following the Kīlauea 2018 eruption that, along with a comparison to the deltas formed at Pu‘u ‘Ō‘ō over the past decade, provide new insight into delta formation. Bathymetric differencing reveals that the 2018 deltas contain more than half of the total volume of lava erupted. In addition, we find that the 2018 deltas are comprised largely of coarse-grained volcanic breccias and intact lava flows, which contrast with those at Pu‘u ‘Ō‘ō that contain a large fraction of fine-grained hyaloclastite. We attribute this difference to less efficient fragmentation of the 2018 ‘a‘ā flows leading to fragmentation by collapse rather than hydrovolcanic explosion. We suggest a mechanistic model where the characteristic grain size influences the form and stability of the delta with fine grain size deltas (Pu‘u ‘Ō‘ō) experiencing larger landslides with greater run-out supported by increased pore pressure and with coarse grain size deltas (Kīlauea 2018) experiencing smaller landslides that quickly stop as the pore pressure rapidly dissipates. This difference, if validated for other lava deltas, would provide a means to assess potential delta stability in future eruptions.

scholarly journals A cooperative DDoS attack detection scheme based on entropy and ensemble learning in SDN

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Shanshan Yu ◽  
Jicheng Zhang ◽  
Ju Liu ◽  
Xiaoqing Zhang ◽  
Yafeng Li ◽  
...  
Keyword(s):  
Ensemble Learning ◽  
Denial Of Service ◽  
Attack Detection ◽  
Coarse Grained ◽  
Communication Overhead ◽  
Detection Scheme ◽  
Fine Grained ◽  
Ddos Attack ◽  
Network Status ◽  
Ddos Attack Detection

AbstractIn order to solve the problem of distributed denial of service (DDoS) attack detection in software-defined network, we proposed a cooperative DDoS attack detection scheme based on entropy and ensemble learning. This method sets up a coarse-grained preliminary detection module based on entropy in the edge switch to monitor the network status in real time and report to the controller if any abnormality is found. Simultaneously, a fine-grained precise attack detection module is designed in the controller, and a ensemble learning-based algorithm is utilized to further identify abnormal traffic accurately. In this framework, the idle computing capability of edge switches is fully utilized with the design idea of edge computing to offload part of the detection task from the control plane to the data plane innovatively. Simulation results of two common DDoS attack methods, ICMP and SYN, show that the system can effectively detect DDoS attacks and greatly reduce the southbound communication overhead and the burden of the controller as well as the detection delay of the attacks.

Rheology of hydrocarbon gels

1950 ◽  
Vol 200 (1061) ◽  
pp. 183-188 ◽  
Keyword(s):  
Mechanical Properties ◽  
Experimental Measurement ◽  
Theoretical Basis ◽  
Continuous Media ◽  
Point Of View ◽  
Coarse Grained ◽  
Testing Instrument ◽  
Fine Grained ◽  
Mineral Oils ◽  
Space And Time

Hydrocarbon gels contain a number of materials, such as rubber, greases, saponified mineral oils, etc., of great interest for various engineering purposes. Specific requirements in mechanical properties have been met by producing gels in appropriately chosen patterns of constituent components of visible, colloidal, molecular and atomic sizes, ranging from coarse-grained aggregates, represented by sponges, foams, emulsions, etc.; to fine-grained and apparently homogeneous ones, represented by optically clear compounds. The engineer who has to deal with the whole range of such materials will adopt a macroscopic point of view, based on an apparent continuity of all the material structures and of the distributions in space and time of the displacements and forces occurring under mechanical actions. It has been possible to determine these distributions in the framework of a comprehensive scheme in which the fundamental principles of the mechanics of continuous media provide the theoretical basis, and a testing instrument of new design, termed Rheogoniometer, the means of experimental measurement (Weissenberg 1931, 1934, 1946, 1947, 1948).

Microstructural Refinement in a Commercial Aluminum Alloy Processed by ECAP Using a Die Channel Angle of 110 Degrees

2015 ◽  
Vol 1114 ◽  
pp. 3-8
Author(s):  
Nicolae Şerban ◽  
Doina Răducanu ◽  
Nicolae Ghiban ◽  
Vasile Dănuţ Cojocaru
Keyword(s):  
Grain Refinement ◽  
Cross Section ◽  
High Strength ◽  
Secondary Phase ◽  
Coarse Grained ◽  
Metallographic Analysis ◽  
Second Phase ◽  
Channel Angle ◽  
Ambient Temperatures ◽  
Fine Grained

The properties of ultra-fine grained materials are superior to those of corresponding conventional coarse grained materials, being significantly improved as a result of grain refinement. Equal channel angular pressing (ECAP) is an efficient method for modifying the microstructure by refining grain size via severe plastic deformation (SPD) in producing ultra-fine grained materials (UFG) and nanomaterials (NM). The grain sizes produced by ECAP processing are typically in the submicrometer range and this leads to high strength at ambient temperatures. ECAP is performed by pressing test samples through a die containing two channels, equal in cross-section and intersecting at a certain angle. The billet experiences simple shear deformation at the intersection, without any precipitous change in the cross-section area because the die prevents lateral expansion and therefore the billet can be pressed more than once and it can be rotated around its pressing axis during subsequent passes. After ECAP significant grain refinement occurs together with dislocation strengthening, resulting in a considerable enhancement in the strength of the alloys. A commercial AlMgSi alloy (AA6063) was investigated in this study. The specimens were processed for a number of passes up to nine, using a die channel angle of 110°, applying the ECAP route BC. After ECAP, samples were cut from each specimen and prepared for metallographic analysis. The microstructure of the ECAP-ed and as-received material was investigated using optical (OLYMPUS – BX60M) and SEM microscopy (TESCAN VEGA II – XMU). It was determined that for the as-received material the microstructure shows a rough appearance, with large grains of dendritic or seaweed aspect and with a secondary phase at grain boundaries (continuous casting structure). For the ECAP processed samples, the microstructure shows a finished aspect, with refined, elongated grains, also with crumbled and uniformly distributed second phase particles after a typical ECAP texture.

Sign in / Sign up

Export Citation Format

Share Document