scholarly journals Multiobjective Optimization of Fabrication Parameters of Jute Fiber/Polyester Composites with Egg Shell Powder and Nanoclay Filler

Molecules ◽  
2020 ◽  
Vol 25 (23) ◽  
pp. 5579
Author(s):  
Ganesan Karuppiah ◽  
Kailasanathan Chidambara Kuttalam ◽  
Murugesan Palaniappan ◽  
Carlo Santulli ◽  
Sivasubramanian Palanisamy
Keyword(s):  
Natural Fiber ◽  
Optimal Parameter ◽  
Optimization Technique ◽  
Interfacial Strength ◽  
Jute Fiber ◽  
Matrix Composites ◽  
Weight Percentage ◽  
Egg Shell ◽  
Powder Content ◽  
Fabrication Parameters

In the present study, a model is presented to optimize the fabrication parameters of natural fiber reinforced polyester matrix composites with dual fillers. In particular, jute fiber mat was chosen as reinforcement and eggshell powder (ESP) and montmorillonite nanoclay (NC) were selected as fillers. The weight per square meter (GSM) of the fiber, the weight percentage of ESP and NC have been chosen as independent variables and the influence of these variables on tensile, flexural and impact strength of the composite has been inspected. The permutations of the different combinations of factors are intended to accomplish higher interfacial strength with the lowest possible number of tested specimens. The experiments were designed by the Taguchi strategy and a novel multi-objective optimization technique named COPRAS (COmplex PRoportional ASsessment of alternatives) was used to determine the optimal parameter combinations. Affirmation tests were performed with the optimal parameter settings and the mechanical properties were evaluated and compared. Experimental results show that fiber GSM and eggshell powder content are significant variables that improve mechanical strength, while the nanoclay appears less important.

scholarly journals Effect of Rot-, Fire-, and Water-Retardant Treatments on Jute Fiber and Their Associated Thermoplastic Composites: A Study by FTIR

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2571
Author(s):  
Sweety Shahinur ◽  
Mahbub Hasan ◽  
Qumrul Ahsan ◽  
Nayer Sultana ◽  
Zakaria Ahmed ◽  
...  
Keyword(s):  
Product Development ◽  
Environmental Sustainability ◽  
Mechanical Performance ◽  
Natural Fiber ◽  
Jute Fiber ◽  
Thermoplastic Composites ◽  
Ftir Analysis ◽  
Renewable Materials ◽  
Weight Percentage ◽  
Chemical Treatments

Natural renewable materials can play a big role in reducing the consumption of synthetic materials for environmental sustainability. Natural fiber-reinforced composites have attracted significant research and commercial importance due to their versatile characteristics and multi-dimensional applications. As the natural materials are easily rotten, flammable, and moisture absorbent, they require additional chemical modification for use in sustainable product development. In the present research, jute fibers were treated with rot-, fire-, and water-retardant chemicals and their corresponding polymer composites were fabricated using a compression molding technique. To identify the effects of the chemical treatments on the jute fiber and their polymeric composites, a Fourier transformed infrared radiation (FTIR) study was conducted and the results were analyzed. The presence of various chemicals in the post-treated fibers and the associated composites were identified through the FTIR analysis. The varying weight percentage of the chemicals used for treating the fibers affected the physio-mechanical properties of the fiber as well as their composites. From the FTIR analysis, it was concluded that crystallinity increased with the chemical concentration of the treatment which could be contributed to the improvement in their mechanical performance. This study provides valuable information for both academia and industry on the effect of various chemical treatments of the jute fiber for improved product development.

A new assessment on mechanical properties of jute fiber mat with egg shell powder/nanoclay-reinforced polyester matrix composites

2018 ◽  
Vol 17 (4) ◽  
pp. 482-490 ◽  
Author(s):  
K. Ganesan ◽  
C. Kailasanathan ◽  
M. R. Sanjay ◽  
P. Senthamaraikannan ◽  
S. S. Saravanakumar
Keyword(s):  
Mechanical Properties ◽  
Jute Fiber ◽  
Matrix Composites ◽  
Polyester Matrix ◽  
Egg Shell ◽  
Shell Powder

Mechanical Property Studies on Flax Fiber Reinforced Basalt Powder Filled Polyester Composite

2020 ◽  
Vol 13 ◽  
Author(s):  
V. Arumugaprabu ◽  
K.Arun Prasath ◽  
S. Mangaleswaran ◽  
M. Manikanda Raja ◽  
R. Jegan
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Natural Fiber ◽  
Tensile Load ◽  
Flax Fiber ◽  
Flexural Properties ◽  
Weight Percentage ◽  
Tensile Impact ◽  
Polyester Composite ◽  
Additional Support

: The objective of this research is to evaluate the tensile, impact and flexural properties of flax fiber and basalt powder filled polyester composite. Flax fiber is one of the predominant reinforcement natural fiber which possess good mechanical properties and addition of basalt powder as a filler provides additional support to the composite. The Composites are prepared using flax fiber arranged in 10 layers with varying weight percentage of the basalt powder as 5 wt.%, 10 wt.%, 15 wt.%, 20 wt.%, 25 wt.% and 30 wt.% respectively. From the results it is inferred that the composite combination 10 Layers of flax / 5 wt.%, basalt Powder absorbs more tensile load of 145 MPa. Also, for the same combination maximum flexural strength is about 60 MPa. Interestingly in the case of impact strength more energy was absorbed by 10 layers of flax and 30 wt.% of basalt powder. In addition, the failure mechanism of the composites also discussed briefly using SEM studies.

scholarly journals Wettability in Metal Matrix Composites

Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1034
Author(s):  
Massoud Malaki ◽  
Alireza Fadaei Tehrani ◽  
Behzad Niroumand ◽  
Manoj Gupta
Keyword(s):  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Aluminum Matrix ◽  
Interfacial Strength ◽  
High Strength ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Metal Matrix Nanocomposites ◽  
Aerospace Applications ◽  
Matrix Nanocomposites

Metal matrix composites (MMCs) have been developed in response to the enormous demand for special industrial materials and structures for automotive and aerospace applications, wherein both high-strength and light weight are simultaneously required. The most common, inexpensive route to fabricate MMCs or metal matrix nanocomposites (MMNCs) is based on casting, wherein reinforcements like nanoceramics, -carbides, -nitrides, elements or carbon allotropes are added to molten metal matrices; however, most of the mentioned reinforcements, especially those with nanosized reinforcing particles, have usually poor wettability with serious drawbacks like particle agglomerations and therefore diminished mechanical strength is almost always expected. Many research efforts have been made to enhance the affinity between the mating surfaces. The aim in this paper is to critically review and comprehensively discuss those approaches/routes commonly employed to boost wetting conditions at reinforcement-matrix interfaces. Particular attention is paid to aluminum matrix composites owing to the interest in lightweight materials and the need to enhance the mechanical properties like strength, wear, or creep resistance. It is believed that effective treatment(s) may enormously affect the wetting and interfacial strength.

scholarly journals Influence of Rigid Brazilian Natural Fiber Arrangements in Polymer Composites: Energy Absorption and Ballistic Efficiency

2021 ◽  
Vol 5 (8) ◽  
pp. 201
Author(s):  
Fabio C. Garcia Filho ◽  
Fernanda S. Luz ◽  
Michelle S. Oliveira ◽  
Wendell B. A. Bezerra ◽  
Josiane D. V. Barbosa ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Energy Absorption ◽  
Natural Fiber ◽  
High Energy ◽  
Matrix Composites ◽  
Lignocellulosic Fibers ◽  
Efficiency Performance ◽  
Epoxy Matrix Composite ◽  
Polymeric Matrix Composites ◽  
Armor System

Since the mid-2000s, several studies were carried out regarding the development of ballistic resistant materials based on polymeric matrix composites reinforced with natural lignocellulosic fibers (NLFs). The results reported so far are promising and are often comparable to commonly used materials such as KevlarTM, especially when used as an intermediate layer in a multilayer armor system (MAS). However, the most suitable configuration for these polymer composites reinforced with NLFs when subjected to high strain rates still lacks investigation. This work aimed to evaluate four possible arrangements for epoxy matrix composite reinforced with a stiff Brazilian NLF, piassava fiber, regarding energy absorption, and ballistic efficiency. Performance was evaluated against the ballistic impact of high-energy 7.62 mm ammunition. Obtained results were statistically validated by means of analysis of variance (ANOVA) and Tukey’s honest test. Furthermore, the micromechanics associated with the failure of these composites were determined. Energy absorption of the same magnitude as KevlarTM and indentation depth below the limit predicted by NIJ standard were obtained for all conditions.

Study on Thermal, Thermo-Mechanical, and Flexural Properties of Jute Fiber Surface Modification and Its Reinforced Composite

2021 ◽  
Vol 8 (5) ◽  
pp. 11-17
Author(s):  
Syed Rashedul Islam ◽  
Abeer Alassod ◽  
Mohammed Kayes Patoary ◽  
Tayyab Naveed ◽  
Md Arshad Ali ◽  
...  
Keyword(s):  
Natural Fiber ◽  
Natural Fibers ◽  
Fiber Surface ◽  
Jute Fiber ◽  
Flexural Properties ◽  
Reinforced Composites ◽  
Acid Pretreatment ◽  
Chemical Treatments ◽  
Jute Fibers ◽  
Composite Properties

In recent years, reinforced composites from biodegradable and natural fibers have a worldwide scope for advanced applications. However, the core limitation of natural fiber reinforced composites are poor consistency among supporting fibers and the matrix. Therefore, optimal structural performance of fibers and matrix is desirable. In this study, chemical treatments (i.e., alkali pretreatment, acid pretreatment, and scouring) were applied to jute fibers for improvement of composite properties. Thermal, thermo-mechanical, and flexural properties, and surface morphology, of untreated and treated jute fibers were studied on the treated fibers. Jute fiber/epoxy composite properties were analyzed by thermogravimetric analysis (TGA), flexural strength and modulus, and dynamic mechanical analysis (DMA). The chemical treatments had a significant impact on the properties of jute fiber composites.

scholarly journals Evaluation of Mechanical Properties of AA7075 /Al2O3/Mg Hybrid Composites

2019 ◽  
Vol 8 (6) ◽  
pp. 5044-5046 ◽  
Keyword(s):  
Mechanical Properties ◽  
Hybrid Composites ◽  
Casting Process ◽  
Stir Casting ◽  
Tensile Behaviour ◽  
Matrix Composites ◽  
Compression Behavior ◽  
Weight Percentage ◽  
Fea Simulation ◽  
Alloy Metal

The present work was planned to evaluate the mechanical properties of alumina reinforced aluminium alloy such hardness and compression behavior of al2o3 /aa7075 alloy metal matrix composites. Both, experimental and finite element analyses were carried out to establish tensile behaviour of the composites with different weight percentage of al2o3 fabricated by the stir casting process. The results concluded that addition of alumina to the aa7075 improves the mechanical properties of the composite. Further the results of FEA simulation of the composites are close to the actual results which shows that cost and time can be reduced if FEA is performed

Mechanical Properties of Chemical Treated Jute Fiber Reinforced Polymer Composites

2020 ◽  
Vol 1002 ◽  
pp. 75-83
Author(s):  
Wafaa Mahdi Salih
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Fiber Length ◽  
Natural Fiber ◽  
Low Cost ◽  
Jute Fiber ◽  
Reinforced Polymer ◽  
Fiber Reinforced Polymer Composites ◽  
The Relationship ◽  
Pmma Polymer

Using PMMA Polymer reinforced by Natural Fiber (N.F.) materials have established much consideration because of several advantages for example low cost, non-abrasive, lightweight, non-toxic and the properties of bio-degradable. many kinds of research have been done in the recent usage of the natural reinforcing material to the preparation of different types of composites. Chemically treated jute fiber can enhance the surface of the fiber, decrease the absorption technique, and improve the roughness surface.in this research, pre-chemical treated in different lengths of jute- fibers in PMMA polymer-composites has been considered. Also, the effect of chemical treatment on mechanical properties of jute, jute reinforcing composite has been conferred. The results showed that the tensile strength T.S. of the treated in benzoylate solutions (4 mm) length fiber had good indicate to better interlocking between composite contents.Flexural-Strength F.S. of the-alkaline. solution treated (12 mm) length of fiber was obtained-better-results by increasing (16.5 %) compared with (2 mm) fiber-length. The fracture of the samples has discussed the relationship between composite adhesion. Impact Strength I.S. of the alkaline-treated (8,12 mm) fiber- a length that is due to to.better mechanical - interlocking between composite materials. The 2 mm fiber – length was not suitable-PMMA/ Jute composite in these tested for treated and untreated chemicals

Sign in / Sign up

Export Citation Format

Share Document