scholarly journals Simultaneous Generation of Complex Structured Curve Beam

Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 87
Author(s):  
Jun Wu ◽  
Xinquan Tang ◽  
Jun Xia
Keyword(s):  
Curve Beam ◽  
Micro Machining ◽  
Linear Phase ◽  
Simultaneous Generation ◽  
Single Beam ◽  
Practical Applications ◽  
Shaping Technique ◽  
Multiple Beams ◽  
Fundamental Research ◽  
Beam Lattice

At present, people are using holographic technologies to shape complex optical beams for both fundamental research and practical applications. However, most of the reported works are focusing on the generation of a single beam pattern based on the computer-generated hologram (CGH). In this paper, we present a method for simultaneously shaping the multiple beam lattice where the intensity and phase of each individual beam can be prescribed along an arbitrary geometric curve. The CGH that is responsible for each individual beam is calculated by using the holographic beam shaping technique, afterwards all the CGHs are multiplexed and encoded into one phase-only hologram by adding respective linear phase grating such that different curves are appeared in different positions of the focal regions. We experimentally prove that the simultaneous generation of multiple beams can be readily achieved. The generated beams are especially useful for applications such as multitasking micro-machining and optical trapping.

scholarly journals Heterodimer Formation of the Homodimeric ABC Transporter OpuA

2021 ◽  
Vol 22 (11) ◽  
pp. 5912
Author(s):  
Patricia Alvarez-Sieiro ◽  
Hendrik R. Sikkema ◽  
Bert Poolman
Keyword(s):  
Abc Transporter ◽  
Conformational Dynamics ◽  
Host Organism ◽  
Affinity Tag ◽  
Practical Applications ◽  
Fundamental Research ◽  
Protein Multimerization ◽  
Biochemical Analyses

Many proteins have a multimeric structure and are composed of two or more identical subunits. While this can be advantageous for the host organism, it can be a challenge when targeting specific residues in biochemical analyses. In vitro splitting and re-dimerization to circumvent this problem is a tedious process that requires stable proteins. We present an in vivo approach to transform homodimeric proteins into apparent heterodimers, which then can be purified using two-step affinity-tag purification. This opens the door to both practical applications such as smFRET to probe the conformational dynamics of homooligomeric proteins and fundamental research into the mechanism of protein multimerization, which is largely unexplored for membrane proteins. We show that expression conditions are key for the formation of heterodimers and that the order of the differential purification and reconstitution of the protein into nanodiscs is important for a functional ABC-transporter complex.

scholarly journals Dynamical Manipulation of Surface Plasmon Polaritons

2019 ◽  
Vol 9 (16) ◽  
pp. 3297 ◽  
Author(s):  
Wang ◽  
Zhao ◽  
Li
Keyword(s):  
Electromagnetic Field ◽  
Metal Surface ◽  
Surface Plasmon ◽  
Surface Plasmon Polaritons ◽  
Wide Spectrum ◽  
Future Perspectives ◽  
Practical Applications ◽  
Fundamental Research ◽  
Dielectric Structures ◽  
Plasmon Polaritons

As the fundamental and promising branch of nanophotonics, surface plasmon polaritons (SPP) with the ability of manipulating the electromagnetic field on the subwavelength scale are of interest to a wide spectrum of scientists. Composed of metallic or dielectric structures whose shape and position are carefully engineered on the metal surface, traditional SPP devices are generally static and lack tunability. Dynamical manipulation of SPP is meaningful in both fundamental research and practical applications. In this article, the achievements in dynamical SPP excitation, SPP focusing, SPP vortex, and SPP nondiffracting beams are presented. The mechanisms of dynamical SPP devices are revealed and compared, and future perspectives are discussed.

scholarly journals Microdroplet-guided intercalation and deterministic delamination towards intelligent rolling origami

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Borui Xu ◽  
Xinyuan Zhang ◽  
Ziao Tian ◽  
Di Han ◽  
Xingce Fan ◽  
...  
Keyword(s):  
Low Cost ◽  
Rolling Direction ◽  
Three Dimensional ◽  
Van Der Waals Interaction ◽  
Creative Design ◽  
General Strategy ◽  
Practical Applications ◽  
On Demand ◽  
Vapor Sensing ◽  
Fundamental Research

Abstract Three-dimensional microstructures fabricated by origami, including folding, rolling and buckling, gain great interests in mechanics, optics and electronics. We propose a general strategy on on-demand and spontaneous rolling origami for artificial microstructures aiming at massive and intelligent production. Deposited nanomembranes are rolled-up in great amount triggered by the intercalation of tiny droplet, taking advantage of a creative design of van der Waals interaction with substrate. The rolling of nanomembranes delaminated by liquid permits a wide choice in materials as well as precise manipulation in rolling direction by controlling the motion of microdroplet, resulting in intelligent construction of rolling microstructures with designable geometries. Moreover, this liquid-triggered delamination phenomenon and constructed microstructures are demonstrated in the applications among vapor sensing, microresonators, micromotors, and microactuators. This investigation offers a simple, massive, low-cost, versatile and designable construction of rolling microstructures for fundamental research and practical applications.

scholarly journals Isoreticular zirconium-based metal–organic frameworks: discovering mechanical trends and elastic anomalies controlling chemical structure stability

2016 ◽  
Vol 18 (13) ◽  
pp. 9079-9087 ◽  
Author(s):  
Matthew R. Ryder ◽  
Bartolomeo Civalleri ◽  
Jin-Chong Tan
Keyword(s):  
Mechanical Properties ◽  
Chemical Structure ◽  
Metal Organic Frameworks ◽  
Structure Stability ◽  
Practical Applications ◽  
Open Framework ◽  
Metal Organic ◽  
Fundamental Research ◽  
Elastic Anomalies ◽  
Framework Compounds

Understanding the mechanical properties of MOFs is crucial not only to yield robust practical applications, but also to advance fundamental research underpinning flexibility of a myriad of open-framework compounds.

Surface Modifications of Bulk Micromachined Titanium Pillar Arrays: A Wick Material for Thin Flat Heat Pipes

2009 ◽  
Author(s):  
Changsong Ding ◽  
Carl D. Meinhart ◽  
Noel C. MacDonald
Keyword(s):  
Heat Pipe ◽  
Heat Transfer Performance ◽  
Heat Pipes ◽  
Surface Modifications ◽  
Practical Applications ◽  
Plating Method ◽  
Modified Surfaces ◽  
Pillar Arrays ◽  
Extended Surface ◽  
Fundamental Research

Wicking materials with tunable wettability are of great importance for both fundamental research and practical applications such as heat pipes. In this work, we adopt recently developed titanium bulk micromachining[1] techniques to fabricate pillar arrays. Then we modify the micromachined pillars to form micro- & nano-textured (bitextured) titania structures (BTS). Further, we investigated how to plate gold on the modified surfaces to tune the wettability. A wicking material for heat pipe requires super wetting by common fluids such as water. We show theoretical studies and experimental work to investigate the wetting behavior of two different designs/samples. For heat pipe applications the BTS and plating gold not only increases the capillary pressure which enhances liquid pumping from condenser to evaporator, but also increases the heat transfer performance by extended surface and smaller pore sizes[2]. Testing results show that water can completely wet the micromachined Ti pillars (Design A: 5μm in diameter/5μm gap). The BTS helps increase the wetting speed by over 100% for this design. A second design with much larger diameter and gap (Design B: 100μm in diameter/50μm in gap) is also tested to compare with design A for wetting speed. Results show that Design B gives a wetting speed twice of Design A. Plating method is used to decrease pillar gap (from 50μm to 5μm) by growing gold on surfaces. This will help increase thermal conductivity of wicking material which is preferred for the evaporator and condenser regions of heat pipes. Wetting experiment is done on Sample B after plating with gold. Wetting results after Au plating show that wetting velocity decreases but is still significantly large.

scholarly journals Role of Nanostructuring of Sensing Materials in Performance of Electrical Gas Sensors by Combining with Extra Strategies

Nano Express ◽  
2021 ◽  
Author(s):  
Bala Ismail Adamu ◽  
Peipei Chen ◽  
Weiguo Chu
Keyword(s):  
Gas Sensors ◽  
Performance Enhancement ◽  
Population Expansion ◽  
Light Sources ◽  
Three Dimension ◽  
Practical Applications ◽  
Fundamental Research ◽  
Rapid Industrialization ◽  
Size And Morphology

Abstract Nanostructuring, including tailoring dimensionality, size and morphology, and nanopatterning, is well recognized to play an increasingly important role in sensing units/chips of electrical gas sensors. As two predominant and fundamental configurations, chemiresistor- and field emission transistor (FET)-based electrical gas sensors are receiving increasing attention for fundamental research and practical applications. Herein, state-of-the-art overviews of electrical gas sensors are presented with emphasis on the role of nanostructuring in sensing units for both chemiresistors and FETs types, the strategies for their performance enhancement, and some key sensing mechanisms involved. Nanostructuring of sensing units and their dependence of the performance of chemiresistor- and FET-based gas sensors are discussed according to zero- (0D), one-(1D), two- (2D), and three-dimension (3D), respectively. Other types of gas sensors are also mentioned briefly. Some particular strategies such as loading external heat and light sources, electrical field, and mechanical forces for providing extra freedom to improve and optimize the performance are introduced in detail. Finally, a summary and future perspectives about gas sensors are given with some novel strategies, ideas, and solutions that could make it possible to meet the requirements of rapid industrialization, informatization, intelligentization, and population expansion.

scholarly journals Text Analytics in Bulgarian: An Overview and Future Directions

2021 ◽  
Vol 21 (3) ◽  
pp. 3-23
Author(s):  
Gloria Hristova
Keyword(s):  
Economic Research ◽  
Text Analytics ◽  
Language Resources ◽  
Comprehensive Overview ◽  
Text Data ◽  
Future Directions ◽  
Practical Applications ◽  
Modern Business ◽  
Fundamental Research ◽  
Development Of Language

Abstract Text analytics is becoming an integral part of modern business and economic research and analysis. However, the extent to which its application is possible and accessible varies for different languages. The main goal of this paper is to outline fundamental research on text analytics applied on data in Bulgarian. A review of key research articles in two main directions is provided – development of language resources for Bulgarian and experimenting with Bulgarian text data in practical applications. By summarizing the results of a large literature review, we draw conclusions about the degree of development of the field, the availability of language resources for the Bulgarian language and the extent to which text analytics has been applied in practical problems. Future directions for research are outlined. To the best of the author’s knowledge, this is the first study providing a comprehensive overview of progress in the field of text analytics in Bulgarian.

scholarly journals Roadmap for advanced aqueous batteries: From design of materials to applications

2020 ◽  
Vol 6 (21) ◽  
pp. eaba4098 ◽  
Author(s):  
Dongliang Chao ◽  
Wanhai Zhou ◽  
Fangxi Xie ◽  
Chao Ye ◽  
Huan Li ◽  
...  
Keyword(s):  
Large Scale ◽  
Cost Effective ◽  
Material Design ◽  
Advanced Materials ◽  
Promising Alternative ◽  
Practical Applications ◽  
Limited Output ◽  
Key Issues ◽  
Fundamental Research ◽  
Aqueous Batteries

Safety concerns about organic media-based batteries are the key public arguments against their widespread usage. Aqueous batteries (ABs), based on water which is environmentally benign, provide a promising alternative for safe, cost-effective, and scalable energy storage, with high power density and tolerance against mishandling. Research interests and achievements in ABs have surged globally in the past 5 years. However, their large-scale application is plagued by the limited output voltage and inadequate energy density. We present the challenges in AB fundamental research, focusing on the design of advanced materials and practical applications of whole devices. Potential interactions of the challenges in different AB systems are established. A critical appraisal of recent advances in ABs is presented for addressing the key issues, with special emphasis on the connection between advanced materials and emerging electrochemistry. Last, we provide a roadmap starting with material design and ending with the commercialization of next-generation reliable ABs.

scholarly journals Self-template–assisted micro-phase segregation in blended liquid-crystalline block copolymers films toward three-dimensional structures

2020 ◽  
Vol 117 (35) ◽  
pp. 21070-21078
Author(s):  
Yusuke Hibi ◽  
Yuki Oguchi ◽  
Yuta Shimizu ◽  
Kayoko Hashimoto ◽  
Katsuya Kondo ◽  
...  
Keyword(s):  
Liquid Crystalline ◽  
Three Dimensional ◽  
Phase Segregation ◽  
Material Design ◽  
The Other ◽  
Cooling Process ◽  
Water Separation ◽  
Practical Applications ◽  
Out Of Plane ◽  
Fundamental Research

In-plane mesopatterns derived from block-copolymer (BCP) micro-phase segregation in thin films have attracted much interest in practical applications as well as fundamental research programs. However, phase segregation along the film-normal direction has been less studied. Here, we describe a strategy to concurrently, yet independently, control in-plane micro-phase and out-of-plane macro-phase segregation in multiblended films composed of liquid-crystalline BCPs (LCBCPs), affording spontaneously layered three-dimensional (3D) mesostructures. This strategy relies on sequential liquid crystallization during the cooling process in thermal annealing as follows. The constituent LCBCP with the highest isotropic-transition temperature (Tiso) first liquid-crystallizes and segregates from the other LCBCP mixture remaining in isotropic states to form a noncontaminated layer at the top surface. This preformed LCBCP layer preserves its inherent in-plane pattern and acts as a template guiding the subsequent micro-phase segregations of the other low-TisoLCBCPs underneath. This self-template–assisted micro-phase segregation (STAMPS) readily provides 3D mesostructures, the potential toward rational material design of which is also demonstrated in water-separation applications.

Sign in / Sign up

Export Citation Format

Share Document