scholarly journals Production and Characterization of Chitosan–Polyanion Nanoparticles by Polyelectrolyte Complexation Assisted by High-Intensity Sonication for the Modified Release of Methotrexate

2020 ◽  
Vol 13 (1) ◽  
pp. 11 ◽  
Author(s):  
Yhors Ciro ◽  
John Rojas ◽  
Maria Alhajj ◽  
Gustavo Carabali ◽  
Constain Salamanca
Keyword(s):  
Zeta Potential ◽  
Maleic Acid ◽  
High Intensity ◽  
Physical Stability ◽  
Release Mechanism ◽  
Diffusion Controlled ◽  
Polyelectrolyte Complexation ◽  
Anticancer Treatment ◽  
Particle Parameters

A promising strategy to improve the effectivity of anticancer treatment and decrease its side effects is to modulate drug release by using nanoparticulates (NPs) as carriers. In this study, methotrexate-loaded chitosan–polyanion nanoparticles were produced by polyelectrolyte complexation assisted by high-intensity sonication, using several anionic polymers, such as the sodium and potassium salts of poly(maleic acid-alt-ethylene) and poly(maleic acid-alt-octadecene), here named PAM-2 and PAM-18, respectively. Such NPs were analyzed and characterized according to particle size, polydispersity index, zeta potential and encapsulation efficiency. Likewise, their physical stability was tested at 4 °C and 40 °C in order to evaluate any change in the previously mentioned particle parameters. The in vitro methotrexate release was assessed at a pH of 7.4, which simulated physiological conditions, and the data were fitted to the heuristic models of order one, Higuchi, Peppas–Sahlin and Korsmeyer–Peppas. The results revealed that most of the MTX-chitosan–polyanion NPs have positive zeta potential values, sizes <280 nm and monodisperse populations, except for the NPs formed with PAM-18 polyanions. Further, the NPs showed adequate physical stability, preventing NP–NP aggregation. Likewise, these carriers modified the MTX release by an anomalous mechanism, where the NPs formed with PAM-2 polymer led to a release mechanism controlled by diffusion and relaxation, whereas the NPs formed with PAM-18 led to a mainly diffusion-controlled release mechanism.

scholarly journals Synthesis, Characterisation and Biological Evaluation of Ampicillin–Chitosan–Polyanion Nanoparticles Produced by Ionic Gelation and Polyelectrolyte Complexation Assisted by High-Intensity Sonication

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1758 ◽  
Author(s):  
Ciro ◽  
Rojas ◽  
Salamanca
Keyword(s):  
Zeta Potential ◽  
Maleic Acid ◽  
High Intensity ◽  
Antimicrobial Effect ◽  
Fold Increase ◽  
Biological Evaluation ◽  
Resistant Bacteria ◽  
Ionic Gelation ◽  
Polyelectrolyte Complexation ◽  
Broth Microdilution Method

Recently, one of the promising strategies to fight sensitive and resistant bacteria, and decrease the morbidity and mortality rates due to non-nosocomial infections, is to use antibiotic-loaded nanoparticles. In this study, ampicillin-loaded chitosan–polyanion nanoparticles were produced through the techniques of ionic gelation and polyelectrolyte complexation assisted by high-intensity sonication, using several crosslinking agents, including phytic acid (non-polymeric polyanion), sodium and potassium salts of poly(maleic acid-alt-ethylene) and poly(maleic acid-alt-octadecene) (polymeric polyanions). These nanoparticles were analysed and characterised in terms of particle size, polydispersity index, zeta potential and encapsulation efficiency. The stability of these nanosystems was carried out at temperatures of 4 and 40 °C, and the antimicrobial effect was determined by the broth microdilution method using sensitive and resistant Staphylococcus aureus strains. The results reveal that most of the nanosystems have sizes <220 nm, positive zeta potential values and a monodisperse population, except for the nanoparticles crosslinked with PAM-18 polyanions. The nanometric systems exhibited adequate stability preventing aggregation and revealed a two-fold increase in antimicrobial activity when compared with free ampicillin. This study demonstrates the potential application of synthesised nanoparticles in the field of medicine, especially for treating infections caused by pathogenic S. aureus strains.

scholarly journals Design, Development and Evaluation Of Anti-Hypertensive Drug Solid Lipid Nano Particles

2021 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Entrapment Efficiency ◽  
Nano Particles ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Wide Range

Recently, solid lipid Nano-particles have received much attention by the researchers owing to its biodegradability, biocompatibility and the ability to deliver a wide range of drugs. The aim of the present study was to design Diltiazem solid lipid Nano-particles and to evaluate them. Diltiazem solid lipid Nano-particles were prepared by hot homogenization technique using different lipids (Tristearin, GMS and Comprital), soy lecithin as stabilizers and tween 80, Poloxamer as surfactants. The Nano-particles were evaluated for particle size & PDI, zeta potential, entrapment efficiency and in vitro drug release. The particle size ranged from 49.7 to 523.7 nm. PDI of all formulations were good within the range of 0.189 to 0.427. The zeta potential ranged from -10.5 to -29.6 Mv, Entrapment efficiency of all formulations were observed was in the range of 78.68 to 95.23 %. The cumulative percentage release of Diltiazem from different Diltiazem Nano-particles varied from 53.36 to 88.74% depending upon the drug lipid ratio and the type of lipid used. The average percentage of drug released from different SLNs after 24 hours showed in the following order: F9 (53.35%) < F6 (56.75%) < F4 (61.74%) < F7 (63.8%) < F5(67.77%) < F8(69.04%) < F3(75.31%) < F1(79.36%) <F2 (88.74%) respectively. The release kinetic studies showed that the release was first order diffusion controlled and the n values obtained from the Korsmeyer-Peppa’s model indicated the release mechanism was Quasi-Fickian type (n-value of 0.47). Keywords: Diltiazem, solid lipid Nano-particles, FTIR, in vitro drug release.

scholarly journals FORMULATION AND OPTIMIZATION OF NIFEDIPINE LOADED NANOCARRIERS

2021 ◽  
pp. 311-317
Author(s):  
ASHWINI JADHAV ◽  
BINOY VARGHESE CHERIYAN
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Physical Stability ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Physicochemical Characteristics ◽  
Good Choice ◽  
The Stability

Objective: The main aim of this study to formulate a nifedipine-loaded nanocarrier for improving solubility and bioavailability. Methods: To improve the solubility of drug, nifedipine-loaded nanocarrier (lipotomes) were prepared by using the film lipid hydration technique. lipotomes were prepared by using tween 80, which is used for increasing solubility and cetyl alcohol for lipophilic environment. Drug excipients interaction determined by FTIR. lipotomes were characterized for particle size, Entrapment efficiency and zeta potential. lipotomes were optimized by using Design-Expert 12 software. Optimized formula further lyophilized by using different cyroproyectant to improve the stability and oral administration of the drug. Results: FTIR shows there was no interaction between formulation ingredients. Mean particle size, entrapment efficiency, zeta potential was determined and found to be 308.1 nm, 96.7%, 20.1mV, respectively. Surface morphology of lipotomes was observed by a scanning electron microscope (SEM). Optimized lipotomes was lyophilized with Mannitol (8% w/v) was the ideal cryoprotectant to retain the physicochemical characteristics of the OLT formulation after lyophilization. Conclusion: Nifedipine loaded nanocarrier was successfully prepared, using film hydration method. Which have good particle size, EE% and zeta potential. After lyophilization no significant changes was observed in particle size with good physical stability, so it could be a good choice for conventional drug delivery system by doing further investigation as in vitro and in vivo study

scholarly journals Bioactive Glass Nanoparticles as a New Delivery System for Sustained 5-Fluorouracil Release: Characterization and Evaluation of Drug Release Mechanism

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Abeer M. El-Kady ◽  
Mohammad M. Farag
Keyword(s):  
Drug Release ◽  
Bioactive Glass ◽  
Surface Area ◽  
Delivery System ◽  
Release Mechanism ◽  
Burst Release ◽  
Drug Release Mechanism ◽  
Diffusion Controlled ◽  
Ft Ir

Bioactive glass nanoparticles were synthesized and tested for the first time as a new delivery system for sustained 5-fluorouracil (5-FU) release. They were characterized by TEM, DTA, TGA, and FT-IR. The porosity % and specific surface area of glass nanoparticles were 85.59% and 378.36 m2/g, respectively. Thein vitrobioactivity evaluation confirmed that bioactive glass disks prepared from these nanoparticles could induce hydroxyapatite layer over their surfaces in simulated body fluid. Thein vitrodrug release experiment indicated that glass nanoparticles could serve as long-term local delivery vehicles for sustained 5-FU release. The release profile of 5-FU showed an initial fast release stage followed by a second stage of slower release. The initial burst release of 5-FU in the first day was about 23% (28.92 mg·L−1) of the total amount of loaded 5-FU, while the final cumulative percentage of the 5-FU released after 32 days was about 45.6% (57.31 mg·L−1) of the total amount of loaded 5-FU. The application of different mathematical models indicated that 5-FU was released by diffusion controlled mechanism and suggested that its release rate was dependent on glass particles dissolution, changes of surface area as well as diameter of glass particles, and concentration of loaded drug.

scholarly journals Development and In Vitro Evaluation of a Zerumbone Loaded Nanosuspension Drug Delivery System

Crystals ◽  
2018 ◽  
Vol 8 (7) ◽  
pp. 286 ◽  
Author(s):  
Shadab Md ◽  
Bradon Kit ◽  
Sumeet Jagdish ◽  
Dexter David ◽  
Manisha Pandey ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Physical Stability ◽  
Sodium Dodecyl ◽  
Correlation Spectroscopy ◽  
Polydispersity Index ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Saturation Solubility ◽  
Freeze Dried

Zerumbone extracted from the volatile oil of rhizomes available from the Zinigiber zerumbet has promising pharmacological activity. However, it has poor aqueous solubility and dissolution characteristics. To improve this, a nanosuspension formulation of zerumbone was developed. Nanosuspensions were formulated using high-pressure homogenization (HPH) with sodium dodecyl sulphate (SDS) and hydroxypropylmethylcellulose (HPMC) as stabilizers; the formulation was optimized and freeze dried. The optimized nanosuspension product was evaluated using an optical light microscope, photon correlation spectroscopy (PCS), polydispersity index, zeta potential, SEM, differential scanning calorimetry (DSC) and FT-IR. The physical stability of the nanosuspensions was evaluated for 30 days at 4 °C, 25 °C, and 37 °C. To validate the theoretical benefit of the increased surface area, we determined an in vitro saturation solubility and dissolution profile. The mean particle size, polydispersity index and zeta potential of the zerumbone nanosuspensions stabilized by SDS versus HPMC were found to be 211 ± 27 nm vs. 398 ± 3.5 nm, 0.39 ± 0.06 vs. 0.55 ± 0.004, and −30.86 ± 2.3 mV vs. −3.37 ± 0.002 mV, respectively. The in vitro saturation solubility and dissolution revealed improved solubility for the zerumbone nanosuspension. These results suggested that the nanosuspensionlization improves the saturation solubility and dissolution profile of zerumbone, which may facilitate its use as a therapeutic agent in the future.

scholarly journals Box-Behnken design for development and characterization of nanostructured chitosan-based nanoparticles containing sulfasalazine for the treatment of ulcerative colitis

2020 ◽  
Vol 11 (1) ◽  
pp. 532-545
Author(s):  
Ganesh Narayan Sharma ◽  
Praveen Kumar Ch ◽  
Birendra Shrivastava ◽  
Kumar B ◽  
Arindam Chatterjee
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Encapsulation Efficiency ◽  
Desirability Function ◽  
Chitosan Nanoparticles ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
P Value ◽  
Box Behnken Design

The present research was designed to improve the permeability of sulfasalazine by loading it into chitosan nanoparticles using the ionic gelation method. The process parameters were screened and optimized through Box-Behnken design. 13 formulations containing sulfasalazine chitosan-based nanoparticles (SCSNPs) were optimized using particle size, zeta potential, and % encapsulation efficiency as responses. Results were optimized based on the desirability function shown in 2D contour plots and 3D response surface plots. The effect of every factor on responses was statistically analyzed using ANOVA and p-Value, and the correlation coefficient of all the responses was found to be >0.99 and >0.96 for optimized CSNPs and optimized SCSNPs respectively with p<0.05. From the predicted and observed values of responses, the optimized formulation (SCSNPs) has a particle size of 261±3.06 nm, with an encapsulation efficiency of 81.3±5.3%. Morphology of the particles using scanning electron microscopy reveals nearly spherical shaped particles with a zeta potential of +41.4±0.5 mV. In-vitro studies acknowledge that sulfasalazine was released in a sustained manner for about 24 hrs in simulated colonic fluid pH 7 and phosphate buffer pH 7.4,  when compared to a simulated colonic fluid at fed (pH 6) and fasted state (pH 7.8). Optimized SCSNPs followed Korsmeyer Peppas kinetics with a drug release mechanism as non-fickian diffusion (anomalous transport).

Influence of β-Cyclodextrin and Hydroxypropyl-β-Cyclodextrin on Enhancement of Solubility and Dissolution of Isradipine

2017 ◽  
Vol 10 (3) ◽  
pp. 3752-3757
Author(s):  
Narendar D ◽  
Ettireddy S
Keyword(s):  
Inclusion Complex ◽  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physical Stability ◽  
Molecular Complexes ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Phase Solubility ◽  
Cyclodextrin Complexation

The content of this investigation was to study the influence of β-cyclodextrin and hydroxy propyl-β-cyclodextrin complexation on enhancement of solubility and dissolution rate of isradipine. Based on preliminary phase solubility studies, solid complexes prepared by freeze drying method in 1:1 molar ratio were selected and characterized by DSC for confirmation of complex formation. Prepared solid dispersions were evaluated for drug content, solubility and in vitro dissolution. The physical stability of optimized formulation was studied at refrigerated and room temperature for 2 months. Solid state characterization of optimized complex performed by DSC and XRD studies.  Dissolution rate of isradipine was increased compared with pure drug and more with HP-β-CD inclusion complex than β-CD. DSC and XRD analyzes that drug was in amorphous form, when the drug was incorporated as isradipine β-CD and HP-β-CD inclusion complex. Stability studies resulted in low or no variations in the percentage of complexation efficiency suggesting good stability of molecular complexes. The results conclusively demonstrated that the enhancement of solubility and dissolution rate of isradipine by drug-cyclodextrin complexation was achieved.   

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

Formulation and Evaluation of Nanosuspension of Simvastatin

2015 ◽  
Vol 8 (2) ◽  
pp. 2858-2873
Author(s):  
Rupali L. Shid ◽  
Shashikant N. Dhole ◽  
Nilesh Kulkarni ◽  
Santosh L Shid
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Factorial Design ◽  
Dissolution Rate ◽  
In Vitro Dissolution ◽  
Total Drug ◽  
23 Factorial Design ◽  
Rate Of Dissolution

Poor water solubility and slow dissolution rate are issues for the majority of upcoming and existing biologically active compounds. Simvastatin is poorly water-soluble drug and its bioavailability is very low from its crystalline form. The purpose of this study wasto increase the solubility and dissolution rate of simvastatin by the  preparation of nanosuspension by emulsification solvent diffusion method at laboratory scale. Prepared nanosus-pension was evaluated for its particle size and in vitro dissolution study and characterized by zeta potential,differential scanning calorimetry (DSC) and X-Ray diffractometry (XRD), motic digital microscopy, entrapment efficiency, total drug content, saturated solubility study and in vivo study. A 23 factorial design was employed to study the effect of independent variables, amount of SLS (X1), amount of PVPK-30 (X2) and poloxamer-188 (X3) and dependent variables are total drug content and polydispersity Index. The obtained results showed that particle size (nm) and rate of dissolution has been improved when nanosuspension prepared with the higherconcentration of PVPK-30 with the higher concentration of PVP K-30 and Poloxamer-188 and lower concentration of SLS. The particle size and zeta potential of optimized formulation was found to be 258.3 nm and 23.43. The rate of dissolution of the optimized nanosuspension was enhanced (90% in 60min), relative to plain simvastatin  (21% in 60 min), mainly due to the formation of nanosized particles. These results indicate the suitability of 23 factorial  design for preparation of simvastatin loaded nano-suspension significantly improved in vitro dissolution rate and thus possibly enhance fast onset of therapeutic drug effect. In vivo study shows increase in bioavailability in nanosuspension formulation than the plain simvastatin drug.

Sign in / Sign up

Export Citation Format

Share Document