scholarly journals Multifaced Role of Dual Herbal Principles Loaded-Lipid Nanocarriers in Providing High Therapeutic Efficacity

Pharmaceutics ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1511
Author(s):  
Ioana Lacatusu ◽  
Teodora Iordache ◽  
Mirela Mihaila ◽  
Dan Mihaiescu ◽  
Anca Pop ◽  
...  
Keyword(s):  
Herbal Medicine ◽  
Inflammatory Diseases ◽  
In Vitro Release ◽  
Morphological Characteristics ◽  
Entrapment Efficiency ◽  
Glycyrrhiza Glabra ◽  
Radical Oxygen Species ◽  
Tnf Α ◽  
Lipid Nanocarriers

Although many phytochemicals have been used in traditional medicine, there is a great need to refresh the health benefits and adjust the shortcomings of herbal medicine. In this research, two herbal principles (Diosgenin and Glycyrrhiza glabra extract) coopted in the Nanostructured Lipid Carriers have been developed for improving the most desirable properties of herbal medicine—antioxidant and anti-inflammatory actions. The contribution of phytochemicals, vegetable oils and of lipid matrices has been highlighted by comparative study of size, stability, entrapment efficiency, morphological characteristics, and thermal behavior. According to the in vitro MTS and RTCA results, the dual herbal-NLCs were no cytotoxic toward endothelial cells at concentrations between 25 and 100 µg/mL. A rapid release of Glycyrrhiza glabra and a motivated delay of Diosgenin was detected by the in vitro release experiments. Dual herbal-NLCs showed an elevated ability to annihilate long-life cationic radicals (ABTS•+) and short-life oxygenated radicals (an inhibition of 63.4% ABTS•+, while the ability to capture radical oxygen species reached 96%). The production of pro-inflammatory cytokines was significantly inhibited by the newly herbals-NLC (up to 97.9% inhibition of TNF-α and 62.5% for IL-6). The study may open a new pharmacotherapy horizon; it provides a comprehensive basis for the use of herbal-NLC in the treatment of inflammatory diseases.

Preliminary studies on optimization of anti-parkinson drug loaded lipid nanoparticles enriched hydrogel formulations for management of Parkinson’s disease

2021 ◽  
Vol 11 ◽  
Author(s):  
Kumara Swamy ◽  
Ramesh Alli ◽  
Thirupathi Gorre
Keyword(s):  
Parkinson’S Disease ◽  
Particle Size ◽  
Parkinson's Disease ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Release Studies ◽  
Lipid Nanocarriers ◽  
Vitro Release

Purpose: Ropinirole (RP), is a selective dopamine agonist that is used alone or with other medications to treat the symptoms of Parkinson’s disease (PD). RP has low bioavailability of only about 50% due to the first-pass metabolism, and it requires frequent dosing during oral administration. Aim: The objective of the current research was to develop RP loaded solid lipid nanoparticles (RP-SLNs), nanostructured lipid carriers (RP-NLCs), and their corresponding hydrogels (RP-SLN-C and RP-NLC-C) that could enhance RP therapeutic outcomes during PD treatment. Methods: RP nanoparticles were prepared by homogenization followed by probe sonication and optimized based on particle size, polydispersity index (PDI), zeta potential (ZP), % assay, % entrapment efficiency, and in vitro release studies. Optimized formulations were converted to hydrogel formulations using Carbopol 934 as a gelling polymer and optimized based on rheological and release characteristics. Optimized formulations were further evaluated using differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), freeze-drying, and stability study at refrigerated and room temperatures. Results: The optimized RP-SLN formulation showed particle size and entrapment efficiency of 213.5±3.8 nm and 77.9±3.1% compared to 190.6±3.7 nm and 85.7±1.7% for optimized RP-NLC formulation. PXRD supplemented and confirmed DSC results, RP was entrapped in a molecularly dispersed state inside the core of the lipid nanocarrier. Furthermore, RP loaded lipid nanocarriers revealed a spherical shape in SEM images. In vitro release studies demonstrated sustained release profiles for RP from SLNs, NLCs, and their hydrogels over 24 h. Optimized SLN, NLC, and nanocarrier loaded hydrogel formulations were stable over three months at 4ºC and 25ºC storage conditions. Conclusion: Overall, the results demonstrated that lipid nanocarriers and their corresponding hydrogel formulations can be considered as a topical drug delivery vehicle for RP during the treatment of PD.

scholarly journals Challenges in Coopted Hydrophilic and Lipophilic Herbal Bioactives in the Same Nanostructured Carriers for Effective Bioavailability and Anti-Inflammatory Action

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 3035
Author(s):  
Teodora-Alexandra Iordache ◽  
Nicoleta Badea ◽  
Mirela Mihaila ◽  
Simona Crisan ◽  
Anca Lucia Pop ◽  
...  
Keyword(s):  
Physical Stability ◽  
Herbal Medicines ◽  
Morphological Characteristics ◽  
Entrapment Efficiency ◽  
In Vitro Cytotoxicity ◽  
Ongoing Research ◽  
Lipid Nanocarriers ◽  
Anti Inflammatory ◽  
The Individual

There is ongoing research on various herbal bioactives and delivery systems which indicates that both lipid nanocarriers and herbal medicines will be fine tunned and integrated for future bio-medical applications. The current study was undertaken to systematically develop NLC-DSG-yam extract for the improved efficacy of herbal Diosgenin (DSG) in the management of anti-inflammatory disorders. NLCs were characterized regarding the mean size of the particles, morphological characteristics, physical stability in time, thermal behaviour, and entrapment efficiency of the herbal bioactive. Encapsulation efficiency and in vitro antioxidant activity measured the differences between the individual and dual co-loaded-NLC, the co-loaded one assuring a prolonged controlled release of DSG and a more emphasized ability of capturing short-life reactive oxygen species (ROS). NLCs safety properties were monitored following the in vitro MTS ((3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) tetrazolium reduction assay) and RTCA (Real-Time Cell Analysis) assays. Concentrations less than 50 μg/mL showed no cytotoxic effects during in vitro cytotoxicity assays. Besides, the NLC-DSG-yam extract revealed a great anti-inflammatory effect, as the production of pro-inflammatory cytokines (TNF-alpha, IL-6) was significantly inhibited at 50 μg/mL NLC (e.g., 98.2% ± 1.07 inhibition of TNF-α, while for IL-6 the inhibition percentage was of 62% ± 1.07). Concluding, using appropriate lipid nanocarriers, the most desirable properties of herbal bioactives could be improved.

Preparation and In-vitro Evaluation of Fe3O4 Encapsulated by Chitosan Loaded Capecitabine Nanoparticles for the Treatment of Breast Cancer

2016 ◽  
Vol 6 (3) ◽  
Author(s):  
Shanmuganathan S. ◽  
Nigma S. ◽  
Anbarasan B. ◽  
Harika B.
Keyword(s):  
Fe3o4 Nanoparticles ◽  
Polymer Concentration ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Evaluation ◽  
Sem Image ◽  
Therapeutic Molecules ◽  
Dialysis Method ◽  
Vitro Release

Nanoparticulate Carriers which is biodegradable, biocompatible and bio adhesive have significant feasible applications for administration of therapeutic molecules. The present study was aimed to formulate and optimise Capecitabine loaded Chitosan-Fe3O4 Nanoparticles and to study the in-vitro evaluation by sigma dialysis method. Capecitabine loaded chitosan – Fe3O4 nanoparticles batches with different ratios of drug: polymer (1:1, 1:2, 1:3, 1:4, 1:5, 1:6) were prepared by ionic gelation method. Increase in polymer concentration increases the nanoparticle drug content. Entrapment efficiency was 60.12% with drug to polymer ratio F3 (1:3). In-vitro release was found to be 65.20% for 12 hrs. Capecitabine from chitosanFe3O4 nanoparticles SEM image reveals discrete spherical structure and particles with size range of 100-500nm. FTIR studies represent the functional groups present with no characteristics change in formulations. Samples stored at refrigerator conditions showed better stability compared with samples kept at other conditions during 8 weeks of storage.

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

Formulation and Evaluation of Itopride Hydrochloride Floating Beads for Gastroretentive Delivery

2013 ◽  
Vol 6 (4) ◽  
pp. 2269-2280
Author(s):  
Nagratna Dhople ◽  
P N Dandag ◽  
A P Gadad ◽  
C K Pandey ◽  
Masthiholimath V S
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sustained Release Formulation ◽  
Prokinetic Drug ◽  
Drug Entrapment Efficiency ◽  
Itopride Hydrochloride ◽  
Vitro Release

A gastroretentive sustained release system of itopride hydrochloride was formulated to increase the gastric residence time and modulate its release behavior. Itopride hydrochloride is a prokinetic drug used in the treatment of gastroeosophageal reflux disease, Non-ulcer dyspepsia and as an antiemetic. Hence, itopride hydrochloride beads were prepared by emulsion gelation method by employing low methoxy pectin and sodium alginate as sustained release polymers in three different ratios alone and in combination and sunflower oil was used to enable floating property to the beads. The effect of variation in polymer and their concentration was investigated. The beads were evaluated for production yield, particle size, swelling index, density measurement, buoyancy, drug content, drug entrapment efficiency, in vitro release characteristics and release kinetic study. Based on drug entrapment efficiency, buoyancy, swelling and in vitro release, F9 was selected as the optimized formulation. F9 was further subjected to surface morphology by SEM, in vitro release comparison with marketed formulation, in vivo floating study in rabbits and stability study for 90 days. In vitro release follows zero order and fitted in Korsmeyer peppas model (Non-Fickian release). Therefore, the rate of drug release is due to the combined effect of drug diffusion and polymer swelling. The in vivo X-ray studies revealed that the beads were floating in the rabbit stomach up to 10 hours. Thus, it was concluded that the sustained release formulation containing itopride hydrochloride was found to improve patient compliance, minimize the side effects and decrease the frequency of administration.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

Formulation of Modified Release Atorvastatin Nanoparticles by Emulsion Interfacial Reaction Method

2015 ◽  
Vol 8 (3) ◽  
pp. 2937-2940
Author(s):  
Sudhakar Sekar ◽  
Shee Sim May
Keyword(s):  
Interfacial Reaction ◽  
Therapeutic Potential ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Morphological Characteristics ◽  
Preparation Technique ◽  
Modified Release ◽  
Reaction Method ◽  
Vitro Release

The aim of the study is to formulate a modified release chitosan nanoparticles for the oral delivery of atorvastatin and to study the in vitro release of atorvastatin from chitosan nanoparticles. Atorvastatin-loaded chitosan nanoparticles were prepared with different concentration of cross-linking agent (glutaraldehyde) by emulsion interfacial reaction method. The formed nanoparticles were characterized in terms of size and morphological characteristics by scanning electron microscopy (SEM) and transmission electron microscope (TEM). Spherical and regular nanoparticles with the size range of 100-250nm were formed. Atorvastatin encapsulation efficiency of nanoparticles was found to be highest in ANP3, followed by ANP2 and ANP1. The in vitro release of atorvastatin was studied by membrane diffusion technique. The resulted cumulative percentage of drug released for ANP1, ANP2 and ANP3 were 60.08%, 34.81% and 20.39% respectively. Through this study, the nanoparticles preparation technique has shown to be a promising approach for enhancing the dissolution of hydrophobic drugs like atorvastatin calcium. The application of this novel delivery system offers good therapeutic potential in the management of hypercholesterolemia and dyslipidemia.

Formulation and Characterization of Glimepiride Nanoparticles for Dissolution Enhancement

2020 ◽  
Vol 10 (5) ◽  
pp. 649-663
Author(s):  
Reena Siwach ◽  
Parijat Pandey ◽  
Harish Dureja
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Oral Absorption ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Class Ii ◽  
Dissolution Enhancement ◽  
In Vitro Drug Release ◽  
Bcs Class Ii

Background: The rate-limiting step in the oral absorption of BCS class II drugs is dissolution. Their low solubility is one of the major obstacles in the process of drug development. Dissolution rate can be increased by decreasing the particle size to the nano range, eventually leading to increased bioavailability. Objective: : In the present study, glimepiride loaded nanoparticles were prepared to enhance the dissolution rate. The aim of the work was to examine the effect of polymer-drug ratio, solvent-antisolvent ratio and speed of mixing on in vitro release of glimepiride. Methods: Glimepiride is an antidiabetic drug belonging to the BCS class II drugs. The polymeric nanoparticles were formulated according to Box-Behnken Design (BBD) using nanoprecipitation technique. The prepared nanoparticles were evaluated for in vitro drug release, loading capacity, entrapment efficiency, and percentage yield. Result: It was found that NP-8 has maximum in vitro drug release and was selected as an optimized batch. Analysis of Variance (ANOVA) was applied to the in vitro drug release to study the fitness and significance of the model. The batch NP-8 showed 70.34 ± 1.09% in vitro drug release in 0.1 N methanolic HCl and 92.02 ± 1.87% drug release in phosphate buffer pH 7.8. The release data revealed that the nanoparticles followed zero order kinetics. Conclusion: The study revealed that the incorporation of glimepiride into gelucire 50/13 resulted in enhanced dissolution rate.

scholarly journals Development and Evaluation of Rifampicin Loaded Alginate–Gelatin Biocomposite Microfibers

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1514
Author(s):  
Ameya Sharma ◽  
Vivek Puri ◽  
Pradeep Kumar ◽  
Inderbir Singh ◽  
Kampanart Huanbutta
Keyword(s):  
Wound Healing ◽  
Xanthan Gum ◽  
In Vitro Release ◽  
Antimicrobial Properties ◽  
Entrapment Efficiency ◽  
Tissue Proliferation ◽  
Naturally Occurring ◽  
Reinforcing Material ◽  
Vitro Release

Various systematic phases such as inflammation, tissue proliferation, and phases of remodeling characterize the process of wound healing. The natural matrix system is suggested to maintain and escalate these phases, and for that, microfibers were fabricated employing naturally occurring polymers (biopolymers) such as sodium alginate, gelatin and xanthan gum, and reinforcing material such as nanoclay was selected. The fabrication of fibers was executed with the aid of extrusion-gelation method. Rifampicin, an antibiotic, has been incorporated into a biopolymeric solution. RF1, RF2, RF3, RF4 and RF5 were coded as various formulation batches of microfibers. The microfibers were further characterized by different techniques such as SEM, DSC, XRD, and FTIR. Mechanical properties and physical evaluations such as entrapment efficiency, water uptake and in vitro release were also carried out to explain the comparative understanding of the formulation developed. The antimicrobial activity and whole blood clotting of fabricated fibers were additionally executed, hence they showed significant results, having excellent antimicrobial properties; they could be prominent carriers for wound healing applications.

scholarly journals Development of nitazoxanide-loaded colon-targeted formulation for intestinal parasitic infections: centre composite design-based optimization and characterization

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Charu Bharti ◽  
Upendra Nagaich ◽  
Jaya Pandey ◽  
Suman Jain ◽  
Neha Jain
Keyword(s):  
Particle Size ◽  
Desirability Function ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Percentage Yield ◽  
Vitro Release ◽  
Selection Of

Abstract Background The current investigation is focused on the development and characterization of Eudragit S100 coated nitazoxanide-loaded microbeads as colon-targeted system utilizing central composite design (CCD) and desirability function. The study initiated with the selection of a BCS class II drug nitazoxanide and its preformulation screening with excipients, selection of polymer and identification of concentration for CCD, selection of optimized formulation based on desirability function, and in vitro release studies in simulated gastric and colonic media and stability studies. A two-factor, three-level CCD was employed with two independent variables, i.e. X1 (chitosan % w/v) and X2 (sodium tripolyphosphate % w/v), and three dependent variables, i.e. Y1 (particle size in micrometres), Y2 (percentage yield) and Y3 (percent entrapment efficiency), were chosen. Additionally, surface morphology, mucoadhesion and in vitro drug release studies were also conducted. Result Chitosan concentration showing maximum entrapment and optimum particle size was selected to formulate chitosan beads. The polynomial equation and model graphs obtained from the Design-Expert were utilized to examine the effect of independent variables on responses. The effect of formulation composition was found to be significant (p ˂ 0.05). Based on the desirability function, the optimized formulation was found to have 910.14 μm ± 1.03 particle size, 91.84% ± 0.64 percentage yield and 84.75% ± 0.38 entrapment efficiency with a desirability of 0.961. Furthermore, the formulations were characterized for in vitro drug release in simulated colonic media (2% rat caecal content) and have shown a sustained release of ∼ 92% up to 24 h as compared to in vitro release in simulated gastric fluid. Conclusion The possibility of formulation in enhancing percentage yield and entrapment efficiency of nitazoxanide and the utilization of CCD helps to effectively integrate nitazoxanide microbeads into a potential pharmaceutical dosage form for sustained release.

Sign in / Sign up

Export Citation Format

Share Document