scholarly journals Efficient and Selective Adsorption of Gold Ions from Wastewater with Polyaniline Modified by Trimethyl Phosphate: Adsorption Mechanism and Application

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 652 ◽  
Author(s):  
Wang ◽  
Zhao ◽  
Wang ◽  
Zhang ◽  
Zhang
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Process ◽  
Selective Adsorption ◽  
Interaction Mechanism ◽  
Single Layer ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Trimethyl Phosphate ◽  
Selective Recovery

The selective recovery of gold from wastewater is necessary because it is widely used in various fields. In this study, a new polymeric adsorbent (TP-AFC) was prepared by modifying polyaniline with trimethyl phosphate for the selective recovery of gold from wastewater. Bath experiments were carried out to explore the adsorption capacity and mechanism. The optimum pH of adsorption is 4. The adsorption equilibrium is reached at 840 min. The maximum adsorption capacity is 881 mg/g and the adsorption was a spontaneous endothermic process. The adsorption process fitted well with pseudo second-order kinetic and the Langmuir-models. The single-layer chemisorption governed the adsorption process. In addition, the application in wastewater indicated that the interfering ions had no effect on the adsorption of gold ions. TP-AFC has good selectivity. The interaction mechanism was mainly ion exchange and complexation. In general, TP-AFC was successfully prepared and has an excellent future in practical application.

Adsorption of Phosphate onto Slag from Aqueous Solution

2012 ◽  
Vol 550-553 ◽  
pp. 2255-2258
Author(s):  
Bing Bing Liu ◽  
Hua Yong Zhang ◽  
Lu Yi Zhang
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Langmuir Model ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
High Adsorption ◽  
Pseudo Second Order

Phosphate adsorption from aqueous solution using slag was investigated as the function of pH, contact time and adsorbent dosage. The results showed that the optimum value of pH was 2. Both Langmuir isotherm and Freundlich isotherm model were fit to describe the phosphate adsorption, and the maximum adsorption capacity from Langmuir model calculated was 9.09 mg/L. The adsorption process on slag followed pseudo second-order kinetic. Due to the relatively high adsorption capacity, the slag has the potential for application to removal phosphate from wastewater.

scholarly journals The adsorption of lemon yellow dye using cationic cellulose fibers from rice straw as a sustainable biosorbent in aqueous media

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3991-4006
Author(s):  
Zhixin Gu ◽  
Sijia Zhang ◽  
Chuanqing Zhu ◽  
Lijuan Wang
Keyword(s):  
Adsorption Capacity ◽  
Rice Straw ◽  
Adsorption Process ◽  
Exothermic Reaction ◽  
Cellulose Fiber ◽  
Cellulose Fibers ◽  
Lemon Yellow ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Cationic Modification

A biosorbent was prepared from the cellulose fibers found in rice straw through cationic modification. The effects of the dosage, pH, contact time, and initial concentration of lemon yellow dye were explored. The static adsorption results showed that cationic modification drastically improved the adsorption capacity of straw cellulose fiber. The maximum equilibrium adsorption capacity value was 137.6 mg/g and the highest removal reached 99%. The pseudo-second-order kinetic model was a good fit for the adsorption process, together with the Langmuir isotherm model. The adsorption reaction was spontaneous, and the adsorption process was an exothermic reaction, which was shown by the thermodynamic model. As the adsorption time became longer, the effluent concentration became larger until reaching equilibrium. The time was 420 min. After desorption using a dilute NaOH solution, the maximum adsorption capacity was still 36.1 mg/g and the maximum removal still reached 36.2%. The parameters calculated from the Yoon-Nelson model have a good fit with the experimental data. In short, cationic straw cellulose fiber is an effective and easy to prepare biosorbent. This work offers a new method for dye wastewater purification and solves the effective utilization of rice straw resources.

scholarly journals Selective Adsorption of Aqueous Diclofenac Sodium, Naproxen Sodium and iBuprofen Using a Stable Fe3O4-FeBTC Metal Organic Framework

2021 ◽  
Author(s):  
Aldo A. Castañeda Ramírez ◽  
Elizabeth Rojas García ◽  
Ricardo López Medina ◽  
José L. Contreras Larios ◽  
Raúl Suarez Parra ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Magnetite Nanoparticles ◽  
Naproxen Sodium ◽  
Selective Adsorption ◽  
Metal Organic Framework ◽  
Diclofenac Sodium ◽  
Aqueous Media ◽  
Vital Role ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic

Abstract: This work is part of the interest of solving the problems of water contamination with last generation pollutants, for which a novel and in an aqueous medium FeBTC material incorporated with magnetite nanoparticles was proposed. That material was synthesized by in situ solvothermal method, the Fe3O4 nanoparticles were added during the Fe-BTC MOF synthesis and used in the drug’s adsorption. The materials were characterized by XRD, FTIR and Raman spectroscopy, and N2-physisorption at 77 K. Fe3O4-FeBTC material showed a maximum adsorption capacity of 357.1 mg g−1 for diclofenac sodium, 70.9 mg g−1 for naproxen sodium, and 122.9 mg g−1 for Ibuprofen. A pseudo-second-order kinetic model can describe the adsorption process, and the thermodynamic study revealed that the adsorption of the three drugs was a feasible, spontaneous, and exothermic process. The incorporation of magnetite nanoparticles in the FeBTC considerably increased the adsorption capacity of pristine FeBTC. Also, hybridization of the FeBTC with magnetite nanoparticles reinforced the most vulnerable part of the MOF, increasing its thermal and aqueous media stability. The electrostatic interaction, H-bonding, and interactions in the open-metal sites played a vital role in drug adsorption. The competition of sites in the multicomponent mixture's adsorption showed selective adsorption at diclofenac sodium and naproxen sodium.

scholarly journals Adsorption of Basic and Acidic Dyes onto Agricultural Wastes

2016 ◽  
Vol 70 ◽  
pp. 12-26 ◽  
Author(s):  
Nnaemeka John Okorocha ◽  
J. Josphine Okoji ◽  
Charles Osuji
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Adsorption Process ◽  
Aqueous Media ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Thermodynamic Quantities ◽  
Order Kinetic ◽  
Dyes Adsorption ◽  
Adsorbent Dose

The potential of almond leaves powder, (ALP) for the removal of Crystal violet (CV) and Congo red (CR) dyes from aqueous solution was investigated. The adsorbent (ALP) was characterized by FTIR and SEM analysis. Batch adsorption studies were conducted and various parameters such as contact time, adsorbent dosage, initial dye concentration, pH and temperature were studied to observe their effects in the dyes adsorption process. The optimum conditions for the adsorption of CV and CR dyes onto the adsorbent (ALP) was found to be: contact time (100mins), pH (10.0), temperature (343K) for an initial CV dye concentration of 50mg/L using adsorbent dose of 1.0g and contact time (100mins), pH (2.0), temperature (333K) for an initial CR dye concentration of 50mg/L using adsorbent dose 1.0g respectively. The experimental equilibrium adsorption data fitted best and well to the Freundlich isotherm model for both CV and CR dyes adsorption. The maximum adsorption capacity of ALP was found to be 22.96mg/g and 7.77mg/g for the adsorption of CV and CR dyes respectively. The kinetic data conformed to the pseudo-second-order kinetic model. Thermodynamic quantities such as Gibbs free energy (ΔG0), enthalpy (ΔH0) and entropy (ΔS0) were evaluated and the negative values of ΔG0obtained for both dyes indicate the spontaneous nature of the adsorption process while the positive values of ΔH0and ΔS0obtained indicated the endothermic nature and increased randomness during the adsorption process respectively for the adsorption of CV and CR onto ALP. Based on the results obtained such as good adsorption capacity, rapid kinetics, and its low cost, ALP appears to be a promising adsorbent material for the removal of CV and CR dye stuff from aqueous media.

scholarly journals Sheet-like Skeleton Carbon Derived from Shaddock Peels with Hierarchically Porous Structures for Ultra-Fast Removal of Methylene Blue

Water ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 2554
Author(s):  
Panlong Dong ◽  
Hailin Liu ◽  
Shengrui Xu ◽  
Changpo Chen ◽  
Suling Feng ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Adsorption Process ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Initial Concentration ◽  
Hierarchically Porous ◽  
Column Adsorption

To remove the pollutant methylene blue (MB) from water, a sheet-like skeleton carbon derived from shaddock peels (SPACs) was prepared by NaOH activation followed by a calcination procedure under nitrogen protection in this study. Characterization results demonstrated that the as-prepared SPACs displayed a hierarchically porous structure assembled with a thin sheet-like carbon layer, and the surface area of SPAC-8 (activated by 8 g NaOH) was up to 782.2 m2/g. The as-prepared carbon material presented an ultra-fast and efficient adsorption capacity towards MB due to its macro-mesoporous structure, high surface area, and abundant functional groups. SPAC-8 showed ultrafast and efficient removal capacity for MB dye. Adsorption equilibrium was reached within 1 min with a removal efficiency of 99.6% at an initial concentration of 100 mg/g under batch adsorption model conditions. The maximum adsorption capacity for MB was up to 432.5 mg/g. A pseudo-second-order kinetic model and a Langmuir isotherm model described the adsorption process well, which suggested that adsorption rate depended on chemisorption and the adsorption process was controlled by a monolayer adsorption, respectively. Furthermore, column adsorption experiments showed that 96.58% of MB was removed after passing through a SPAC-8 packed column with a flow rate of 20 mL/min, initial concentration of 50 mg/L, and adsorbent dosage of 5 mg. The as-prepared adsorbent displays potential value in practical applications for dye removal due to its ultrafast and efficient adsorption capacity.

scholarly journals Platinum (IV) Recovery from Waste Solutions by Adsorption onto Dibenzo-30-crown-10 Ether Immobilized on Amberlite XAD7 Resin–Factorial Design Analysis

Molecules ◽  
2020 ◽  
Vol 25 (16) ◽  
pp. 3692
Author(s):  
Oana Buriac ◽  
Mihaela Ciopec ◽  
Narcis Duţeanu ◽  
Adina Negrea ◽  
Petru Negrea ◽  
...  
Keyword(s):  
Experimental Data ◽  
Adsorption Capacity ◽  
Thermodynamic Parameters ◽  
Adsorption Isotherms ◽  
Contact Time ◽  
Adsorption Process ◽  
Electrical Contacts ◽  
Bet Surface Area ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic

Platinum is a precious metal with many applications, such as: catalytic converters, laboratory equipment, electrical contacts and electrodes, digital thermometers, dentistry, and jewellery. Due to its broad usage, it is essential to recover it from waste solutions resulted out of different technological processes in which it is used. Over the years, several recovery techniques were developed, adsorption being one of the simplest, effective and economical method used for platinum recovery. In the present paper a new adsorbent material (XAD7-DB30C10) for Pt (IV) recovery was used. Produced adsorbent material was characterized by X-ray dispersion (EDX), scanning electron microscopy (SEM) analysis, Fourier Transform Infrared Spectroscopy and Brunauer-Emmett-Teller (BET) surface area analysis. Adsorption isotherms, kinetic models, thermodynamic parameters and adsorption mechanism are presented in this paper. Experimental data were fitted using three non-linear adsorption isotherms: Langmuir, Freundlich and Sips, being better fitted by Sips adsorption isotherm. Obtained kinetic data were correlated well with the pseudo-second-order kinetic model, indicating that the chemical sorption was the rate-limiting step. Thermodynamic parameters (ΔG°, ΔH°, ΔS°) showed that the adsorption process was endothermic and spontaneous. After adsorption, metallic platinum was recovered from the exhausted adsorbent material by thermal treatment. Adsorption process optimisation by design of experiments was also performed, using as input obtained experimental data, and taking into account that initial platinum concentration and contact time have a significant effect on the adsorption capacity. From the optimisation process, it has been found that the maximum adsorption capacity is obtained at the maximum variation domains of the factors. By optimizing the process, a maximum adsorption capacity of 15.03 mg g−1 was achieved at a contact time of 190 min, initial concentration of 141.06 mg L−1 and the temperature of 45 °C.

scholarly journals The Adsorption of Methylene Blue by an Amphiphilic Block Co-Poly(Arylene Ether Nitrile) Microsphere-Based Adsorbent: Kinetic, Isotherm, Thermodynamic and Mechanistic Studies

Nanomaterials ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1356 ◽  
Author(s):  
Xuefei Zhou ◽  
Mingzhen Xu ◽  
Lingling Wang ◽  
Xiaobo Liu
Keyword(s):  
Methylene Blue ◽  
Adsorption Process ◽  
Selective Adsorption ◽  
Modern Society ◽  
Influential Factors ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Cationic Dye ◽  
Solution Ph ◽  
Arylene Ether

Dye pollution is a serious problem in modern society. We desired to develop an efficient adsorbent for the decontamination of discharged dyes. In this work, the polymeric microspheres derived from a kind of amphiphilic block of co-poly(arylene ether nitrile) (B-b-S-P) were prepared on the basis of “oil-in-water” (O/W) microemulsion method. The B-b-S-P microspheres were found competent to remove the cationic dye, methylene blue (MB); and various influential factors, such as contact time, initial concentration, solution pH and temperature were investigated. Results indicated that the maximum adsorption capacity of B-b-S-P microspheres for MB was 119.84 mg/g at 25 °C in neutral conditions. Adsorption kinetics and isotherm dates were well fitted to a pseudo-second-order kinetic model and the Langmuir isotherm model, and thermodynamic parameters implied that the adsorption process was endothermic. The B-b-S-P microspheres also exhibited a highly selective adsorption for cationic dye MB, even in the presence of anionic dye methyl orange (MO). In addition, the possible adsorption mechanism was studied, suggesting that the electrostatic interaction and π–π interaction could be the main force in the adsorption process.

scholarly journals A Study of the Adsorption and Removal of Sb(III) from Aqueous Solution by Fe(III) Modified Proteus cibarius with Mechanistic Insights Using Response Surface Methodology

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 933
Author(s):  
Xiaojian Li ◽  
Renjian Deng ◽  
Zhie Tang ◽  
Saijun Zhou ◽  
Xing Zeng ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Adsorption Capacity ◽  
Response Surface ◽  
Adsorption Process ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Time ◽  
Initial Concentration ◽  
Adsorbent Dose

Environmental pollution caused by excessive Sb(III) in the water environment is a global issue. We investigated the effect of processing parameters, their interaction and mechanistic details for the removal of Sb(III) using an iron salt-modified biosorbent (Fe(III)-modified Proteus cibarius (FMPAs)). Our study evaluated the optimisation of the adsorption time, adsorbent dose, pH, temperature and the initial concentration of Sb(III). We use response surface methodology to optimize this process, determining optimal processing conditions and the adsorption mechanism evaluated based on isotherm model and adsorption kinetics. The results showed that—(1) the optimal conditions for the adsorption of Sb(III) by FMPAs were an adsorption time of 2.2 h, adsorbent dose of 3430 mg/L, at pH 6.0 and temperature 44.0 °C. For the optimum initial concentration of Sb(III) 27.70 mg/L, the removal efficiency of Sb(III) reached 97.60%. (2) The adsorption process for Sb(III) removal by FMPAs conforms to the Langmuir adsorption isotherm model, and its maximum adsorption capacity (qmax) is as high as 30.612 mg/g. A pseudo-first-order kinetic model provided the best fit to the adsorption process, classified as single layer adsorption and chemisorption mechanism. (3) The adsorption of Sb(III) takes place via the hydroxyl group in Fe–O–OH and EPS–Polyose–O–Fe(OH)2, which forms a new complex Fe–O–Sb and X≡Fe–OH. The study showed that FMPAs have higher adsorption capacity for Sb(III) than other previously studied sorbents and with low environmental impact, it has a great potential as a green adsorbent for Sb(III) in water.

scholarly journals Studies on the Removal of Cadmium Toxic Metal Ions by Natural Clays from Aqueous Solution by Adsorption Process

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Rajaa Bassam ◽  
Achraf El hallaoui ◽  
Marouane El Alouani ◽  
Maissara Jabrane ◽  
El Hassan El Khattabi ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Process ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Toxic Metal ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Natural Clays

The aim of this study is the valorization of the Moroccan clays (QC-MC and QC-MT) from the Middle Atlas region as adsorbents for the treatment of water contaminated by cadmium Cd (II) ions. The physicochemical properties of natural clays are characterized by ICP-MS, XRD, FTIR, and SEM techniques. The adsorption process is investigated as a function of adsorbent mass, solution pH, contact time, temperature, and initial Cd (II) ion concentration. The kinetic investigation shows that the adsorption equilibrium of Cd (II) ions by both natural clays is reached after 30 min for QC-MT and 45 min for QC-MC and fits well to a pseudo-second-order kinetic model. The isotherm study is best fitted by a Freundlich model, with the maximum adsorption capacity determined by the linear form of the Freundlich isotherm being 4.23 mg/g for QC-MC and 5.85 mg/g for QC-MT at 25°C. The cadmium adsorption process was thermodynamically spontaneous and exothermic. The regeneration process showed that these natural clays had excellent recycling capacity. Characterization of the Moroccan natural clays before and after the adsorption process through FTIR, SEM, XRD, and EDX techniques confirmed the Cd (II) ion adsorption on the surfaces of both natural clay adsorbents. Overall, the high adsorption capacity of both natural clays for Cd (II) ions removal compared to other adsorbents motioned in the literature indicated that these two natural adsorbents are excellent candidates for heavy metal removal from aqueous environments.

scholarly journals Selective Adsorption of Aqueous Diclofenac Sodium, Naproxen Sodium, and Ibuprofen Using a Stable Fe3O4–FeBTC Metal–Organic Frameworka

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2293
Author(s):  
Aldo Arturo Castañeda Ramírez ◽  
Elizabeth Rojas García ◽  
Ricardo López Medina ◽  
José L. Contreras Larios ◽  
Raúl Suárez Parra ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Magnetite Nanoparticles ◽  
Naproxen Sodium ◽  
Selective Adsorption ◽  
Diclofenac Sodium ◽  
Aqueous Media ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Drug Adsorption ◽  
Metal Organic

The FeBTC metal–organic framework (MOF) incorporated with magnetite is proposed as a novel material to solve water contamination with last generation pollutants. The material was synthesized by in situ solvothermal methods, and Fe3O4 nanoparticles were added during FeBTC MOF synthesis and used in drug adsorption. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy characterized the materials, with N2-physisorption at 77 K. Pseudo-second-order kinetic and Freundlich models were used to describe the adsorption process. The thermodynamic study revealed that the adsorption of three drugs was a feasible, spontaneous exothermic process. The incorporation of magnetite nanoparticles in the FeBTC increased the adsorption capacity of pristine FeBTC. The Fe3O4–FeBTC material showed a maximum adsorption capacity for diclofenac sodium (DCF), then by ibuprofen (IB), and to a lesser extent by naproxen sodium (NS). Additionally, hybridization of the FeBTC with magnetite nanoparticles reinforced the most vulnerable part of the MOF, increasing the stability of its thermal and aqueous media. The electrostatic interaction, H-bonding, and interactions in the open-metal sites played vital roles in the drug adsorption. The sites’ competition in the multicomponent mixture’s adsorption showed selective adsorption (DCF) and (NS). This work shows how superficial modification with a low-surface-area MOF can achieve significant adsorption results in water pollutants.

Sign in / Sign up

Export Citation Format

Share Document