scholarly journals Ammonium Polyphosphate with High Specific Surface Area by Assembling Zeolite Imidazole Framework in EVA Resin: Significant Mechanical Properties, Migration Resistance, and Flame Retardancy

Polymers ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 534
Author(s):  
Jingyu Wang ◽  
Hui Shi ◽  
Pinlie Zhu ◽  
Yuanjie Wei ◽  
Jianwei Hao
Keyword(s):  
Mechanical Properties ◽  
Specific Surface ◽  
Production Rate ◽  
Surface Area ◽  
Specific Surface Area ◽  
Oxygen Index ◽  
Ammonium Polyphosphate ◽  
Limiting Oxygen Index ◽  
Migration Resistance ◽  
Index Value

A zeolite imidazole framework (ZIF-67) was assembled onto the surface of ammonium polyphosphate (APP) for preparing a series multifunctional flame-retardant APP-ZIFs. The assembly mechanism, chemical structure, chemical compositions, morphology, and specific surface area of APP-ZIFs were characterized. The typical APPZ1 and APPZ4 were selected as intumescent flame retardants with dipentaerythritol (DPER) because of their superior unit catalytic efficiency of cobalt by thermogravimetric analysis. APPZ1 and APPZ4 possessed 6.8 and 92.1 times the specific surface area of untreated APP, which could significantly enhance the interfacial interaction, mechanical properties, and migration resistance when using in ethylene-vinyl acetate (EVA). With 25% loading, 25% APPZ4/DPER achieved a limiting oxygen index value of 29.4% and a UL 94 V-0 rating, whereas 25% APP/DPER achieved a limiting oxygen index value of only 26.2% and a V-2 rating, respectively. The peak of the heat release rate, smoke production rate, and CO production rate respectively decreased by 34.7%, 39.0%, and 40.1%, while the char residue increased by 91.7%. These significant improvements were attributed to the catalytic graphitization by nano cobalt phosphate and the formation of a more protective char barrier comprised of graphite-like carbon.

scholarly journals Nanoporous Quasi-High-Entropy Alloy Microspheres

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 345 ◽  
Author(s):  
Lianzan Yang ◽  
Yongyan Li ◽  
Zhifeng Wang ◽  
Weimin Zhao ◽  
Chunling Qin
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Hierarchical Porous

High-entropy alloys (HEAs) present excellent mechanical properties. However, the exploitation of chemical properties of HEAs is far less than that of mechanical properties, which is mainly limited by the low specific surface area of HEAs synthesized by traditional methods. Thus, it is vital to develop new routes to fabricate HEAs with novel three-dimensional structures and a high specific surface area. Herein, we develop a facile approach to fabricate nanoporous noble metal quasi-HEA microspheres by melt-spinning and dealloying. The as-obtained nanoporous Cu30Au23Pt22Pd25 quasi-HEA microspheres present a hierarchical porous structure with a high specific surface area of 69.5 m2/g and a multiphase approximatively componential solid solution characteristic with a broad single-group face-centered cubic XRD pattern, which is different from the traditional single-phase or two-phase solid solution HEAs. To differentiate, these are named quasi-HEAs. The synthetic strategy proposed in this paper opens the door for the synthesis of porous quasi-HEAs related materials, and is expected to promote further applications of quasi-HEAs in various chemical fields.

scholarly journals Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4169
Author(s):  
Marcel Zambrzycki ◽  
Krystian Sokolowski ◽  
Maciej Gubernat ◽  
Aneta Fraczek-Szczypta
Keyword(s):  
Mechanical Properties ◽  
Specific Surface ◽  
Epoxy Resin ◽  
Surface Area ◽  
Specific Surface Area ◽  
Hybrid Composites ◽  
Department Of Energy ◽  
Carbon Nanofillers ◽  
The Impact ◽  
Secondary Carbon

In this work, we present a comparative study of the impact of secondary carbon nanofillers on the electrical and thermal conductivity, thermal stability, and mechanical properties of hybrid conductive polymer composites (CPC) based on high loadings of synthetic graphite and epoxy resin. Two different carbon nanofillers were chosen for the investigation—low-cost multi-layered graphene nanoplatelets (GN) and carbon black (CB), which were aimed at improving the overall performance of composites. The samples were obtained by a simple, inexpensive, and effective compression molding technique, and were investigated by the means of, i.a., scanning electron microscopy, Raman spectroscopy, electrical conductivity measurements, laser flash analysis, and thermogravimetry. The tests performed revealed that, due to the exceptional electronic transport properties of GN, its relatively low specific surface area, good aspect ratio, and nanometric sizes of particles, a notable improvement in the overall characteristics of the composites (best results for 4 wt % of GN; σ = 266.7 S cm−1; λ = 40.6 W mK−1; fl. strength = 40.1 MPa). In turn, the addition of CB resulted in a limited improvement in mechanical properties, and a deterioration in electrical and thermal properties, mainly due to the too high specific surface area of this nanofiller. The results obtained were compared with US Department of Energy recommendations regarding properties of materials for bipolar plates in fuel cells. As shown, the materials developed significantly exceed the recommended values of the majority of the most important parameters, indicating high potential application of the composites obtained.

scholarly journals The Effects of Silica-Based Fillers on the Properties of Epoxy Molding Compounds

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1811 ◽  
Author(s):  
Mitja Linec ◽  
Branka Mušič
Keyword(s):  
Mechanical Properties ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Fused Silica ◽  
Spiral Flow ◽  
Scanning Calorimetry ◽  
Molding Compounds ◽  
Material Development ◽  
The Impact

Global design and manufacturing of the materials with superb properties remain one of the greatest challenges on the market. The future progress is orientated towards researches into the material development for the production of composites of better mechanical properties to the existing materials. In the field of advanced composites, epoxy molding compounds (EMCs) have attained dominance among the common materials due to their excellent properties that can be altered by adding different fillers. One of the main fillers is often based on silicon dioxide (SiO2). The concept of this study was to evaluate the effects of the selected silica-based fillers on the thermal, rheological, and mechanical properties of EMCs. Various types of fillers with SiO2, including crystalline silica and fused silica, were experimentally studied to clarify the impact of filler on final product. Fillers with different shape (scanning electron microscope, SEM), along with different specific surface area (specific surface area analyzer, BET method) and different chemical structure, were tested to explore their modifications on the EMCs. The influence of the fillers on the compound materials was determined with the spiral flow length (spiral flow test, EMMI), glass transition temperature (differential scanning calorimetry, DSC), and the viscosity (Torque Rheometer) of the composites.

Influence of Zinc Oxide Nanograins on Properties of Epoxidized Natural Rubber Vulcanizates

2017 ◽  
Vol 748 ◽  
pp. 79-83 ◽  
Author(s):  
Rudeerat Suntako
Keyword(s):  
Mechanical Properties ◽  
Zinc Oxide ◽  
Natural Rubber ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Epoxidized Natural Rubber ◽  
Precipitation Method ◽  
Cure Characteristics ◽  
Permanent Set

Zinc oxide (ZnO) nanograins are synthesized by precipitation method filled epoxidized natural rubber compared to conventional ZnO. The synthesized ZnO nanograins are characterized by X-ray diffraction and transmission electron microscopy and found that average primary size of ZnO synthesized around 40 nm and the specific surface area of 28.72 m2 g-1. Furthermore, the cure characteristics, rubber mechanical properties and permanent set were investigated. The obtained results are found that the ZnO nanograins significantly affected to cure characteristics, rubber mechanical properties and permanent set. This is due to small grain size and large specific surface area.

Flammability and Mechanical Properties of Toughened Phenolic Foams Containing APP, MP and MCA

2013 ◽  
Vol 671-674 ◽  
pp. 1809-1812
Author(s):  
Shao Hong Xu ◽  
Xiao Yu Sui ◽  
Zheng Zhou Wang
Keyword(s):  
Mechanical Properties ◽  
Thermal Decomposition ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Ammonium Polyphosphate ◽  
Limiting Oxygen Index ◽  
Melamine Cyanurate ◽  
Melamine Phosphate

Flammability of toughened phenolic (PF) foams containing ammonium polyphosphate (APP), melamine phosphate (MP) or melamine cyanurate(MCA) was studied by limiting oxygen index (LOI). The LOI values show that APP or MP is an effient flame retardant than MCA in the toughened PF foams. The thermal decomposition and mechanical properties of the phenolic foams were also investigated.

scholarly journals Thermal conductivity of polyvinylpolymethylsiloxane aerogels with high specific surface area

RSC Advances ◽  
2019 ◽  
Vol 9 (14) ◽  
pp. 7833-7841 ◽  
Author(s):  
Lukai Wang ◽  
Junzong Feng ◽  
Yonggang Jiang ◽  
Liangjun Li ◽  
Jian Feng
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Energy Storage ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Heat Insulation ◽  
High Specific Surface Area

The traditional SiO2 aerogels are difficult to apply in the fields of energy storage and heat insulation due to their poor mechanical properties.

Effect of carbon fiber amount and length on flame retardant and mechanical properties of intumescent polypropylene composites

2017 ◽  
Vol 52 (4) ◽  
pp. 519-530 ◽  
Author(s):  
Lemiye Atabek Savas ◽  
Aysenur Mutlu ◽  
Ali Sinan Dike ◽  
Umit Tayfun ◽  
Mehmet Dogan
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Carbon Fiber ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Mechanical Test ◽  
Mechanical Analysis ◽  
Limiting Oxygen Index ◽  
Polypropylene Composites ◽  
Index Value

The effects of carbon fiber amount and length were studied on the flame retardant, thermal, and mechanical properties of the intumescent polypropylene composites. The flame retardant properties of the intumescent polypropylene-based composites were investigated using limiting oxygen index, vertical burning test (UL-94), and mass loss calorimeter. The mechanical properties of the composites were studied using tensile test and dynamic mechanical analysis. According to the flammability tests results, the antagonistic interaction was observed between carbon fiber and ammonium polyphosphate. The limiting oxygen index value reduced steadily as the added amount of carbon fiber increased. Mechanical test results revealed that the addition of carbon fiber increased the tensile strength and the elastic modulus as the added amount increased. No effect of carbon fiber length was observed on the flammability, fire performance, and tensile properties of composites, whereas the elastic modulus increased as the carbon fiber initial length increased.

Effect of Crosslink Density and Mechanical Properties on the Wear of Silica-Filled Styrene-Butadiene Rubbers

2005 ◽  
Author(s):  
Yoshitaka Uchiyama ◽  
Tomoaki Iwai ◽  
Naoya Amino ◽  
Kiichiro Shimosaka
Keyword(s):  
Mechanical Properties ◽  
Wear Rate ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Crosslink Density ◽  
Silane Coupling Agent ◽  
Wear Rates ◽  
Silane Coupling ◽  
Styrene Butadiene

In this study the effects of silica size (or specific surface area), mechanical properties and crosslink density on the wear of silica-filled SBRs (styrene butadiene rubbers) were examined. The modulus of each silica-filled SBR examined was proportional to crosslink density. The wear rate of silica-filled SBRs was reduced as the modulus and crosslink density increased. The wear rates increased as the specific surface area of the silica fill particles decreased, when the content of silane coupling agent was constant. As a result, the wear rate was shown to be lower as the modulus and crosslink density increased.

The Oxidation of Macroporous Cerium and Cerium-Zirconium Oxide for the Solar Thermochemical Production of Fuels

2011 ◽  
Author(s):  
Luke J. Venstrom ◽  
Nicholas Petkovich ◽  
Stephen Rudisill ◽  
Andreas Stein ◽  
Jane H. Davidson
Keyword(s):  
Specific Surface ◽  
Production Rate ◽  
Surface Area ◽  
Cerium Oxide ◽  
Specific Surface Area ◽  
Zirconium Oxide ◽  
H2 Production ◽  
Production Rates ◽  
Solar Thermochemical ◽  
Ordered Porous

The H2 and CO productivity and reactivity of three-dimensionally ordered macroporous (3DOM) cerium and cerium-zirconium oxide upon H2O and CO2 oxidation at 1073K is presented in comparison to the productivity and reactivity of non-ordered porous and low porosity cerium oxide. The production of H2 and CO2 constitutes the second step of the two-step solar thermochemical H2O and CO2 splitting cycles. The 3DOM cerium oxide, with a specific surface area of 25 m2 g−1, increases the average H2 and CO production rates over the non-ordered porous cerium oxide with a specific surface area of 112 m2 g−1: the average H2 production rate increases from 5.2 cm3 g−1 min−1 to 7.9 cm3 g−1 min−1 and the average CO production rate increases from 7.7 cm3 g−1 min−1 to 21.9 cm3 g−1 min−1. The superior reactivity of 3DOM cerium oxide is attributed primarily to the stability of the 3DOM structure and also to the improved transport of reacting species to and from oxidation sites realized with the interconnected and ordered pores of the 3DOM structure. Doping the 3DOM cerium oxide with 20 mol% zirconia further stabilizes the structure and increases the average H2 and CO production rates to 10.2 cm3 g−1 min−1 and 22.1 cm3 g−1 min−1, respectively.

A Comparison Study on Microstructure and Mechanical Properties of Si3N4 Ceramic Prepared from MACS Powders

2007 ◽  
Vol 336-338 ◽  
pp. 1179-1181
Author(s):  
Ke Gang Ren ◽  
Ke Xin Chen ◽  
Hai Bo Jin ◽  
Xiao Shan Ning ◽  
He Ping Zhou
Keyword(s):  
Mechanical Properties ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Alpha Phase ◽  
Comparison Study ◽  
Sintering Aids ◽  
Pressing Method ◽  
Fine Powders ◽  
Microstructure And Mechanical Properties

In present work, ultra-fine powders with alpha phase content higher than 95 wt% and specific surface area of 15.33 m2/g were prepared by mechanical activated combustion synthesis (MACS) process. The sinterability of as-fabricated Si3N4 as well as the microstructure and mechanical properties of the sintered bulk were investigated by comparing with a kind of commercial available Si3N4 powders used as diluents in MACS process. Employing hot-pressing method, both powders were sintered equally by using Y2O3 and Al2O3 as sintering aids. Results showed that smaller particle size and higher specific surface area were obtained by MACS process when compared with the commercial one. Bulk Si3N4 appeared approximately the same relative density, hardness, strength and fracture toughness, however, proved to be higher while using MACS powders.

Sign in / Sign up

Export Citation Format

Share Document