scholarly journals Effect of the Esterification of Starch with a Mixture of Carboxylic Acids from Yarrowia lipolitica Fermentation Broth on Its Selected Properties

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1383 ◽  
Author(s):  
Ewa Zdybel ◽  
Tomasz Zięba ◽  
Ewa Tomaszewska-Ciosk ◽  
Waldemar Rymowicz

Potato starch was esterified with carboxylic acids contained in the fermentation broth from Yarrowia lipolitica yeast production. Various acid concentrations and various roasting temperatures were used to determine effects of process conditions on ester properties, including the number of acid residues attached to starch chains, starch susceptibility to amylolysis, and thermal characteristics of starch phase transitions. Study results demonstrated the effect of both the composition and the dose of the fermentation broth and of roasting temperature of starch on the number of acid residues attached to starch chains. Citric acid was more susceptible to esterification with starch (DS = 5.65%) compared to the α-ketoglutaric acid (DS = 0.12%). In the case of the latter, a higher degree of substitution was determined in the esters produced at higher roasting temperatures. The lowest digestibility (RS = 20%) was demonstrated for the starch esters with the highest degree of substitution with citric acid, whereas all starch esters showed decreased values of the thermal characteristics of pasting.

2021 ◽  
Vol 2 (2) ◽  
pp. 434-449
Author(s):  
David ONWE ◽  
Adeleke Isaac BAMGBOYE

Optimization of process variables has become very vital in oil extraction processes to obtain maximum oil yield from oilseeds and nuts. This work focussed on the optimization of process oil extraction process from sandbox seed by mechanical expression. Effects of moisture content, roasting temperature, roasting time, expression pressure and expression time on oil yield from sandbox seed was studied using a 5×5 Central Composite Rotatable Design of Response Surface Methodology experimental design. Results obtained were subjected to Analysis of Variance (ANOVA) and SPSS statistical tool at (p = 0.05). Optimum conditions predicted were validated by experiments. All the processing factors were significant at (p = 0.05) for the sandbox oil yield except roasting temperature. The experimental results and predicted values showed low deviation (0.01-0.62). Oil yields obtained from the sandbox seed at varying process conditions varied from 16.38-38.68%. The maximum oil yield of 38.68% was obtained when the sandbox seed was subjected to process conditions of 6% moisture content, 85°C roasting temperature, 15 min roasting time, expression pressure of 20 MPa and 8 min pressing time. Mathematical equations to predict sandbox seed oil yield at varying process conditions were developed with an R2 (0.8908). The optimum extractable oil yield of 38.95% was predicted for sandbox seed at processing conditions of 7.03% moisture content, 97.72°C roasting temperature, 11.32 min roasting time, 15.11 MPa expression pressure and 8.57 min expression time. The study results provide data for designs of process and equipment for oil extraction from sandbox and other oilseeds.


2014 ◽  
Vol 900 ◽  
pp. 361-364
Author(s):  
Xiao Hui Wang ◽  
Xi Hua Du ◽  
Li Min Dong

Esters of Citric acid and palmityl alcohol were synthesized by esterification reaction under catalysis of cation exchange resin and P-toluene sulfonic acid respectively. The effects of amount of catalyst, ratio of raw materials, reaction time and temperature on the synthesis reaction were investigated . The experimental results showed that optimum of process conditions were 1:1~1:1.5 molar ratio of citric acid and palmityl alcohol, reaction temperature of 130~140°C, reaction time of 2 h. Conversion of palmityl alcohol were all more than 90% under 0.3% dosage using p-toluene sulfonic acid as the catalyst, or 0.5% dosage using 721 cation exchange resin with sulfonic acid type as catalyst. The synthesized product had good surface activity.


2021 ◽  
Author(s):  
Kristian Klumpp ◽  
Claudia Marcolli ◽  
Thomas Peter

Abstract. Potassium-feldspars (K-feldspars), such as microcline, are considered key dust minerals inciting ice nucleation in mixed phase clouds. Besides the high ice nucleation activity of microcline, recent studies also revealed a high sensi-tivity of microcline towards interaction with solutes on its surface. Here, we investigate the effect of organic and bio-organic substances on the ice nucleation activity of microcline, with the aim to better understand the underlying sur-face interactions. We performed immersion freezing experiments with microcline in solutions of three carboxylic acids, five amino acids and two polyols to represent these compound classes. By means of a differential scanning calorimeter we investigated the freezing of emulsified droplets of microcline suspended in various solutions. Depend-ing on the type of solute, different effects were observed. In the case of carboxylic acids (acetic, oxalic and citric acid), the measured heterogeneous onset temperatures, Thet, showed no significant deviation from the behavior pre-dicted by the water activity criterion, Thet(aw) = Tmelt(aw+Δaw), which relates Thet with the melting point temperature Tmelt via a constant water activity offset Δaw. While this behavior could be interpreted as a lack of interaction of the solute molecules with the surface, the carboxylic acids caused the fraction of heterogeneously frozen water, Fhet(aw), to decrease by up to 40 % with increasing solute concentrations. In combination, unaltered Thet(aw) and reduced Fhet(aw) suggest that active sites were largely deactivated by the acid molecules, but amongst those remaining active are also the best sites with the highest Thet. A deviation from this behavior is citric acid, which showed not only a de-crease in Fhet, but also a decrease in Thet of up to 4 K for water activities below 0.99, pointing to a depletion of the best active sites by interactions with the citrate ions. When neutralized solutions of the acids were used instead, the de-crease in Fhet became even more pronounced. The slope of Thet(aw) was different for each of the neutralized acid solu-tions. In the case of amino acid solutions, we found a decrease in Thet (up to 10 K), significantly below the Δaw-criterion, as well as a reduction in Fhet (up to 60 %). Finally, in case of the investigated polyols, no significant devia-tion of Thet from the Δaw-criterion was observed, and no significant deviation of Fhet in comparison to a pure water suspension was found. Furthermore, we measured the effects of aging on the ice nucleation activity in experiments with microcline suspended in solutions for up to seven days, and tested the reversibility of the interaction with the solutes after aging for 10 days. For citric acid, an ongoing irreversible degradation of the ice nucleation activity was observed, whereas the amino acids showed completely reversible effects. In summary, our experiments demonstrate a remarkable sensitivity of microcline ice nucleation activity to surface interactions with various solutes, underscoring the importance of the history of such particles from source to frozen cloud droplet in the atmosphere.


Author(s):  
В.В. ЛИТВЯК

Исследованы особенности катионизации картофельного крахмала N-(3-хлоро-2-гидроксипропил)-N,N,N-триметиламмоний хлоридом (ХГПТМАХ). В качестве методов исследования применяли фотографирование (макросъемку), ЯМР- и ИК-спектроскопию, рентгенографию для исследования фазовой структуры. Проведены фазовый и гравиометрический анализ и представлены расчеты степени кристалличности (СК) и степени аморфности образцов нативного и катионного картофельного крахмала. При исследовании особенностей химического строения полученного катионного картофельного крахмала со степенью замещения 0,042 выявлено присутствие остатков α-D-глюкопиранозы и ХГПТМАХ, что свидетельствует об изменении аморфно-кристаллической структуры. Установлено существенное уменьшение СК картофельного крахмала после его катионизации при температурах, приводящих к сильному набуханию крахмальных гранул в реакционной смеси. Эти изменения тем значительнее, чем выше температура реакции. Введение в макромолекулу крахмала катионных групп оказывает существенное влияние на термические характеристики крахмала, особенно на начальную температуру и механизм деградации. Features of cationization potato starch N-(3-chloro-2-hydroxypropyl)-N,N,N-trimethylammonium chloride (CHPTMAC) is investigated. Photography (macro photography), NMR- and IR-spectroscopy, x-ray for the study of the phase structure were used as research methods. Phase and gravimetrical analyses carried out and calculations of crystallinity degree (CD) and of amorphousness degree of the samples of native and cationic potato starch are presented. In the study of the chemical structure of the obtaining cationic potato starch with a degree of substitution of 0,042 the presence of residues of α-D-glucopyranose and CHPTMAC revealed that indicates a change in the amorphous crystal structure. A significant decrease in the CD of potato starch after its cation at temperatures leading to a strong swelling of starch granules in the reaction mixture was established. These changes are more significant, the higher the reaction temperature. The introduction in the macromolecule of starch cationic groups has a significant impact on the thermal characteristics of starch, especially on the initial temperature and degradation mechanism.


2021 ◽  
Vol 214 ◽  
pp. 74-85
Author(s):  
Mateusz Szczygiełda ◽  
Beata Konopczyńska ◽  
Adam Andrzejewski ◽  
Krystyna Prochaska

2018 ◽  
Vol 2018 ◽  
pp. 1-11
Author(s):  
María D. Torres ◽  
Francisco Chenlo ◽  
Ramón Moreira

The influence of roasting conditions on the potato starch (PS) composition, solubility, crystallinity, gel-forming thermal profiles, and texture of the corresponding gels was studied. Thermorheological testing of roasted starches with (RPS) and without (RPSI) the soluble fraction was conducted on a stress-controlled rheometer. Texture profile analysis (TPA) was used to determine the RPS final gel texture. Solubility tests showed equivalent effects of starch roasting for samples treated at 190°C for 8 h (RPS190-8), 210°C for 6 h (RPS210-6), and 230°C for 4 h (RPS230-4). The apparent amylose content of RPS linearly increased with the decreasing degree of crystallinity. Elastic (G′) and viscous (G″) properties of RPS depended markedly on apparent amylose content and crystallinity. G′gel values of roasted starches linearly increased with the amylose content suggesting a promotion of the amylose breakdown with roasting temperature. Gels prepared with RPS roasted between 120 and 170°C exhibited intermediate strength and fully thermal reversible features. Roasting between 190 and 210°C favoured strong and fully thermal reversible gels. Although RPS230-4 gels exhibited similar strength to RPS190-8 and RPS210-4, no fully thermal reversible gels were obtained. The soluble fraction removal led to a drop the RPSI gels strength with increasing roasting temperature. No water syneresis was identified for RPS gels during one-week ageing, except for RPS230 gels. Relationships between textural parameters from TPA and viscoelastic gel properties determined by rheology were established.


2020 ◽  
Vol 22 (8) ◽  
pp. 2526-2533 ◽  
Author(s):  
Lijuan Liu ◽  
Qifeng Wei ◽  
Yong Zhou ◽  
Xiulian Ren

The separation of citric acids was realized by utilizing hydrophobic deep eutectic solvents (DESs), which were formed by using N,N-dibutylacetamide as a hydrogen acceptor and citric acid as the hydrogen bond.


Batteries ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. 3 ◽  
Author(s):  
Gerd Liebig ◽  
Ulf Kirstein ◽  
Stefan Geißendörfer ◽  
Frank Schuldt ◽  
Carsten Agert

To draw reliable conclusions about the thermal characteristic of or a preferential cooling strategy for a lithium–ion battery, the correct set of thermal input parameters and a detailed battery layout is crucial. In our previous work, an electrochemical model for a commercially-available, 40 Ah prismatic lithium–ion battery was validated under heuristic temperature dependence. In this work the validated electrochemical model is coupled to a spatially resolved, three dimensional (3D), thermal model of the same battery to evaluate the thermal characteristics, i.e., thermal barriers and preferential heat rejection patterns, within common environment layouts. We discuss to which extent the knowledge of the batteries’ interior layout can be constructively used for the design of an exterior battery thermal management. It is found from the study results that: (1) Increasing the current rate without considering an increased heat removal flux at natural convection at higher temperatures will lead to increased model deviations; (2) Centralized fan air-cooling within a climate chamber in a multi cell test arrangement can lead to significantly different thermal characteristics at each battery cell; (3) Increasing the interfacial surface area, at which preferential battery interior and exterior heat rejection match, can significantly lower the temperature rise and inhomogeneity within the electrode stack and increase the batteries’ lifespan.


2020 ◽  
Vol 117 (4) ◽  
pp. 411
Author(s):  
Zhenxing Xing ◽  
Gongjin Cheng ◽  
Zixian Gao ◽  
He Yang ◽  
Xiangxin Xue

In the iron and steel industry, improving the usage amount of New Zealand sea sand ore as a raw material for ironmaking can reduce the production costs of iron and steel enterprises to a certain extent. In this paper, the New Zealand sea sand ore without any grinding pretreatment was used as raw material, oxidized pellets were prepared by using a disc pelletizer, and the experimental conditions for preparing oxidized pellets were investigated and optimized. The effects of binder dosages, roasting temperature and roasting time on the properties of pellets were mainly investigated, and the effects of roasting temperature and roasting time on the microstructure of oxidized pellets was discussed by researching XRD patterns and SEM-EDS. With the increase of binder dosages, the drop strength of green pellets and the compressive strength of oxidized pellets were gradually increased. With the increase of roasting temperature and roasting time, the compressive strength of oxidized pellets increased gradually. When the amount of New Zealand sea sand ore was increased to 40–50%, the optimal process conditions for the preparation of oxidized pellets were as follows: the dosage of binder was 1.5%, the roasting temperature was 1200 °C, and the roasting time was 20 min.


Sign in / Sign up

Export Citation Format

Share Document