scholarly journals Malva parviflora Leaves Mucilage: An Eco-Friendly and Sustainable Biopolymer with Antioxidant Properties

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4251
Author(s):  
Ans Munir ◽  
Fadia S. Youssef ◽  
Saiqa Ishtiaq ◽  
Sairah H. Kamran ◽  
Alaa Sirwi ◽  
...  
Keyword(s):  
Binding Capacity ◽  
Antioxidant Properties ◽  
Water Soluble ◽  
Angle Of Repose ◽  
Gas Chromatography Mass Spectrometry ◽  
Fenton Reagent ◽  
Protection Factor ◽  
Documentation System ◽  
Scanning Calorimetry ◽  
Malva Parviflora

Malva parviflora L. is an edible and medicinal herb containing mucilaginous cells in its leaves. Mucilage obtained from M. parviflora leaves (MLM) was extracted in distilled water (1:10 w/v) at 70 °C followed by precipitation with alcohol. Preliminary phytochemical tests were performed to assess the purity of the extracted mucilage. Results showed that the yield of mucilage was 7.50%, and it was free from starch, alkaloids, glycosides, saponins, steroids, lipids and heavy metals. MLM had 16.19% carbohydrates, 13.55% proteins and 4.76% amino acids, which indicate its high nutritional value. Physicochemical investigations showed that MLM is neutral and water-soluble, having 5.84% moisture content, 15.60% ash content, 12.33 swelling index, 2.57 g/g water-holding capacity and 2.03 g/g oil-binding capacity. The functional properties, including emulsion capacity, emulsion stability, foaming capacity and stability increased with increased concentrations. Micromeritic properties, such as bulk density, tapped density, Carr’s index, Hausner ratio, and angle of repose, were found to be 0.69 g/cm3, 0.84 g/cm3, 17.86%, 1.22 and 28.5, respectively. Scanning electron microscopy (SEM) showed that MLM is an amorphous powder possessing particles of varying size and shape; meanwhile, rheological studies revealed the pseudoplastic behavior of MLM. The thermal transition process of MLM revealed by a differential scanning calorimetry (DSC) thermogram, occurring at a reasonable enthalpy change (∆H), reflects its good thermal stability. The presence of functional groups characteristic of polysaccharides was ascertained by the infrared (IR) and gas chromatography/mass spectrometry (GC/MS) analyses. GC revealed the presence of five neutral monosaccharides; namely, galactose, rhamnose, arabinose, glucose and mannose, showing 51.09, 10.24, 8.90, 1.80 and 0.90 mg/g of MLM, respectively. Meanwhile, galacturonic acid is the only detected acidic monosaccharide, forming 15.06 mg/g of MLM. It showed noticeable antioxidant activity against the DPPH (1,1-diphenyl-2-picrylhydrazyl) radical with an IC50 value of 154.27 µg/mL. It also prevented oxidative damage to DNA caused by the Fenton reagent, as visualized in gel documentation system. The sun protection factor was found to be 10.93 ± 0.15 at 400 µg/mL. Thus, MLM can be used in food, cosmetic and pharmaceutical industry and as a therapeutic agent due to its unique properties.

scholarly journals DEVELOPMENT AND CHARACTERIZATION OF CONTROLLED RELEASE TABLETS OF CANDESARTAN CILEXETIL/Β-CYCLODEXTRIN INCLUSION COMPLEX

2019 ◽  
pp. 198-209
Author(s):  
OMAR SAEB SALIH ◽  
ZAHRAA M. HAMODDI ◽  
SALAM S. TAHER
Keyword(s):  
Sustained Release ◽  
Candesartan Cilexetil ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Water Soluble ◽  
Matrix Tablets ◽  
Angle Of Repose ◽  
Matrix Tablet ◽  
Scanning Calorimetry ◽  
Weight Variation

Objective: Matrix tablet approach is one of the delivery systems intended for poorly water-soluble drugs like candesartan cilexetil. Candesartan cilexetil is a class II drug used for the treatment of hypertension. Methods: Matrix tablets from (F1x to F18z) were prepared in the presence of β-cyclodextrin. Matrix tablet formulation ensures control release of the drug and higher dissolution by β-cyclodextrin. Fourier transform infrared spectroscopy and differential scanning calorimetry were used to study compatibility. Results:The angle of repose determination showed good flow for most of the formulas besides having good compressibility. Weight variation test for all formulas showed accepted value. Drug content measurement showed accepted values. Friability and hardness of tablets were within the allowed values. Higher tablet swelling was obtained for the formulas containing hydroxy propyl methyl cellulose (HPMC) K100M (F3x and F15z) in which the ratio of the polymer was (1:1) and (1:3) respectively. In vitro release showed that F1x to F13z were studied depends on the type and amount of polymer i.e. (1:1), (1:2) and (1:3) respectively. F1x release after 8h was 95% which contain (1:1) polymer ratio in compare to F3x, which showed 85% after 8h, Which include 1:3 (drug: HPMC K100). Kinetic studies showed a zero-order model. Conclusion: The use of β-cyclodextrin modify the release profile of the drug, and control the sustained release formulas. The lower the time of the release but in a range that a sustained release of the drug was observed in compare with the formulas prepared without β-cyclodextrin.

scholarly journals Trachyspermum ammi aromatic water: A traditional drink with considerable anti-Candida activity

2020 ◽  
Author(s):  
Ali Arabi Monfared ◽  
Seyyed Amin Ayatolahi Mousavi ◽  
Kamiar Zomorodian ◽  
Davood Mehrabani ◽  
Aida Iraji ◽  
...  
Keyword(s):  
Essential Oil ◽  
Candida Species ◽  
Biofilm Formation ◽  
Clinical Laboratory ◽  
Antioxidant Properties ◽  
Water Soluble ◽  
Gas Chromatography Mass Spectrometry ◽  
Therapeutic Trial ◽  
Antifungal Activities ◽  
Trachyspermum Ammi

Background and Purpose: Aromatic waters (AWs) are therapeutic distillates, which harbor both essential oil and water-soluble components of a plant. Due to the dispersion of the light amount of essence through the AWs, they have their specific pleasant smell, taste, and medicinal properties. In Iranian traditional medicine, Trachyspermum ammi AW is used to treat gastrointestinal disorders. The present study was conducted to determine the chemical composition of the essential oil extracted from T. ammi AW and its antifungal activities against Candida species. Materials and Methods: The composition of the essential oil extracted from T. ammi AW was analyzed by gas chromatography-mass spectrometry. In addition, the evaluation of the antifungal activity of AW against Candida species was performed using broth microdilution methods as recommended by the Clinical Laboratory Standard Institute. Moreover, the biofilm formation inhibition, antioxidant properties, and experimental activity of AW were determined in an animal model. Results: According to the results, thymol (78.08%) was the major compound of EO, followed by carvacrol (8.20%) and carvotanacetone (6.50%). Furthermore, T. ammi AW exhibited antifungal activities against the examined fungi and inhibited the biofilm formation of C. albicans at a concentration of up to 0.25 V/V. Histopathological analyses revealed that Candida colonization declined in the mice following the administration of T. ammi AW in a therapeutic trial. Conclusion: It seems that the presence of phenolic monoterpenes in AW has resulted in antifungal effects. Pleasant odor and antioxidant properties are extra bonuses to the antimicrobial effects of this plant. Based on the findings, AW might have the potential to be used in the management of alimentary candidiasis or oral hygienic products. 

scholarly journals Development and Characterization of Controlled Release Tablets of Candesartan Cilexetil/ β‑Cyclodextrin Inclusion Complex

2020 ◽  
Vol 10 (02) ◽  
pp. 273-283
Author(s):  
Omar Saeb Salih ◽  
Zahraa M. Hamoddi ◽  
Salam S. Taher
Keyword(s):  
Sustained Release ◽  
Candesartan Cilexetil ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Water Soluble ◽  
Matrix Tablets ◽  
Angle Of Repose ◽  
Matrix Tablet ◽  
Scanning Calorimetry ◽  
Weight Variation

Objective: Matrix tablet approach is one of the delivery systems intended for poorly water-soluble drugs, like candesartan cilexetil (CC). CC is a class II drug used for the treatment of hypertension. Methods: Matrix tablets from (F1x to F18z) were prepared in the presence of β‑cyclodextrin. Matrix tablet formulation ensures control release of the drug and higher dissolution by β‑cyclodextrin. Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC) were used to study compatibility. Results: The angle of repose determination showed good flow for most of the formulas, besides having good compressibility. Weight variation test for all formulas showed accepted value. Drug content measurement showed accepted values. Friability and hardness of tablets were within the allowed values. Higher tablet swelling was obtained for the formulas containing hydroxypropyl methylcellulose (HPMC) K100M (F3x and F15z), in which the ratio of the polymer was 1:1 and 1:3, respectively. In vitro release showed that F1x to F13z were studied depends on the type and amount of polymer, i.e., 1:1, 1:2, and 1:3, respectively. F1x release after 8 hours was 95%, which contains 1:1 polymer ratio in comparison to F3x, which showed 85% after 8 hours, which includes 1:3 (drug: HPMC K100). Kinetic studies showed a zero-order model. Conclusion: The use of β‑cyclodextrin modifies the release profile of the drug, and some control the more sustained-release formulas. The lower the time of the release but in a range that a sustained release of the drug was observed in comparison with the formulas prepared without β‑cyclodextrin.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Enhancement of Solubility and Dissolution Rate of Poorly Water Soluble Drug using Cosolvency and Solid Dispersion Techniques

1970 ◽  
Vol 1 (4) ◽  
pp. 349-356
Author(s):  
Meka Lingam ◽  
Vobalaboina Venkateswarlu
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physicochemical Characterization ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Peg 400 ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

The low aqueous solubility of celecoxib (CB) and thus its low bioavailability is a problem.    Thus, it is suggested to improve the solubility using cosolvency and solid dispersions techniques. Pure CB has solubility of 6.26±0.23µg/ml in water but increased solubility of CB was observed with increasing concentration of cosolvents like PEG 400, ethanol and propylene glycol. Highest solubility (791.06±15.57mg/ml) was observed with cosolvency technique containing the mixture of composition 10:80:10%v/v of water: PEG 400: ethanol. SDs with different polymers like PVP, PEG were prepared and subjected to physicochemical characterization using Fourier-transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), solubility and dissolution studies. These studies reveals that CB exists mainly in amorphous form in prepared solid dispersions of PVP, PEG4000 and PEG6000 further it can also be confirmed by solubility and dissolution rate studies. Solid dispersions of PV5 and PV9 have shown highest saturation solubility and dissolution rate

The Potential Migrated Mechanism of Water-Soluble Components in Pellets Prepared by Wet Extrusion/Spheronization: Effect of Drying Rate

2020 ◽  
Vol 17 ◽  
Author(s):  
Bingwei Wang ◽  
Jianping Liu ◽  
Zhenghua Li ◽  
Yulong Xia ◽  
Shuangshuang Zhang ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Drying Rate ◽  
Scanning Calorimetry ◽  
Drying Temperature ◽  
Wet Extrusion ◽  
Extrusion Spheronization ◽  
Soluble Components

Background: At present, there were numerous researches on the migration of components in tablets and granules, the investigation in the pharmaceutical literatrue concerning the effect of drying rate on the migration of water-soluble components of pellets was limited. Temperature and relative humidity (RH) were crucial parameters during the drying process which was an essential step in the preparation of pellets via wet extrusion/spheronization. To quantify these variables, the water loss percentage of pellets per minute was defined as drying rate. Objective: The study aimed to investigate the influence of drying rate on the migration of water-soluble components in wet pellets and the potential migrated mechanism. Methods: The pellets containing tartrazine as a water-soluble model drug and microcrystalline cellulose as a matrix former were prepared by extrusion/spheronization and dried at four different drying temperature and relative humidity. Afterward, the extent of migrated tartrazine was assessed regarding appearance, in-vitro dissolution test, Differential Scanning Calorimetry, X-Ray Powder Diffraction, Attenuated total reflectance Fourier transform infrared spectroscopy and Confocal Raman Mapping. Results: Results demonstrated that red spots of tartrazine appeared on the surface of pellets and more than 40% tartrazine were burst released within 5 minutes when pellets dried at 60℃/RH 10%. While pellets dried at 40℃/RH 80%, none of these aforementioned phenomena was observed. Conclusion: In conclusion, the faster drying rate was, the more tartrazine migrated to the exterior of pellets. Adjusting drying temperature and relative humidity appropriately could inhibit the migration of water-soluble components within wet extrusion/spheronization pellets.

scholarly journals The Correlation between Physical Crosslinking and Water-Soluble Drug Release from Chitosan-Based Microparticles

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 455
Author(s):  
Emilia Szymańska ◽  
Katarzyna Woś-Latosi ◽  
Julia Jacyna ◽  
Magdalena Dąbrowska ◽  
Joanna Potaś ◽  
...  
Keyword(s):  
Drug Release ◽  
Polymer Matrix ◽  
Drug Loading ◽  
Water Soluble ◽  
Dissolution Behavior ◽  
Complex Nature ◽  
Prolonged Release ◽  
Scanning Calorimetry ◽  
Burst Effect ◽  
The Impact

Microparticles containing water-soluble zidovudine were prepared by spray-drying using chitosan glutamate and beta-glycerophosphate as an ion crosslinker (CF). The Box–Behnken design was applied to optimize the microparticles in terms of their drug loading and release behavior. Physicochemical studies were undertaken to support the results from dissolution tests and to evaluate the impact of the crosslinking ratio on the microparticles’ characteristics. The zidovudine dissolution behavior had a complex nature which comprised two phases: an initial burst effect followed with a prolonged release stage. The initial drug release, which can be modulated by the crosslinking degree, was primarily governed by the dissolution of the drug crystals located on the microparticles’ surfaces. In turn, the further dissolution stage was related to the drug diffusion from the swollen polymer matrix and was found to correlate with the drug loading. Differential Scanning Calorimetry (DSC) studies revealed the partial incorporation of a non-crystallized drug within the polymer matrix, which correlated with the amount of CF. Although CF influenced the swelling capacity of chitosan glutamate microparticles, surprisingly a higher amount of CF did not impact the time required for 80% of the drug to be released markedly. The formulation with the lowest polymer:CF ratio, 3:1, was selected as optimal, providing satisfactory drug loading and displaying a moderate burst effect within the first 30 min of the study, followed with a prolonged drug release of up to 210 min.

scholarly journals Effect of DMPA and Molecular Weight of Polyethylene Glycol on Water-Soluble Polyurethane

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1915 ◽  
Author(s):  
Eyob Wondu ◽  
Hyun Woo Oh ◽  
Jooheon Kim
Keyword(s):  
Molecular Weight ◽  
Contact Angle ◽  
Polyethylene Glycol ◽  
Photoelectron Spectroscopy ◽  
Water Solubility ◽  
Soft Segment ◽  
Water Soluble ◽  
Size Exclusion ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry

In this study water-soluble polyurethane (WSPU) was synthesized from isophorone diisocyanate (IPDI), and polyethylene glycol (PEG), 2-bis(hydroxymethyl) propionic acid or dimethylolpropionic acid (DMPA), butane-1,4-diol (BD), and triethylamine (TEA) using an acetone process. The water solubility was investigated by solubilizing the polymer in water and measuring the contact angle and the results indicated that water solubility and contact angle tendency were increased as the molecular weight of the soft segment decreased, the amount of emulsifier was increased, and soft segment to hard segment ratio was lower. The contact angle of samples without emulsifier was greater than 87°, while that of with emulsifier was less than 67°, indicating a shift from highly hydrophobic to hydrophilic. The WSPU was also analyzed using Fourier transform infrared spectroscopy (FT-IR) to identify the absorption of functional groups and further checked by X-ray photoelectron spectroscopy (XPS). The molecular weight of WSPU was measured using size-exclusion chromatography (SEC). The structure of the WSPU was confirmed by nuclear magnetic resonance spectroscopy (NMR). The thermal properties of WSPU were analyzed using thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC).

scholarly journals Enhanced Water Solubility and Oral Bioavailability of Paclitaxel Crystal Powders through an Innovative Antisolvent Precipitation Process: Antisolvent Crystallization Using Ionic Liquids as Solvent

Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1008 ◽  
Author(s):  
Qilei Yang ◽  
Chang Zu ◽  
Wengang Li ◽  
Weiwei Wu ◽  
Yunlong Ge ◽  
...  
Keyword(s):  
Oral Bioavailability ◽  
High Performance ◽  
Water Solubility ◽  
Water Soluble ◽  
Precipitation Process ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Antisolvent Precipitation ◽  
Antisolvent Crystallization ◽  
Artificial Gastric Juice

Paclitaxel (PTX) is a poor water-soluble antineoplastic drug with significant antitumor activity. However, its low bioavailability is a major obstacle for its biomedical applications. Thus, this experiment is designed to prepare PTX crystal powders through an antisolvent precipitation process using 1-hexyl-3-methylimidazolium bromide (HMImBr) as solvent and water as an antisolvent. The factors influencing saturation solubility of PTX crystal powders in water in water were optimized using a single-factor design. The optimum conditions for the antisolvent precipitation process were as follows: 50 mg/mL concentration of the PTX solution, 25 °C temperature, and 1:7 solvent-to-antisolvent ratio. The PTX crystal powders were characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, high-performance liquid chromatography–mass spectrometry, X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Raman spectroscopy, solid-state nuclear magnetic resonance, and dissolution and oral bioavailability studies. Results showed that the chemical structure of PTX crystal powders were unchanged; however, precipitation of the crystalline structure changed. The dissolution test showed that the dissolution rate and solubility of PTX crystal powders were nearly 3.21-folds higher compared to raw PTX in water, and 1.27 times higher in artificial gastric juice. Meanwhile, the bioavailability of PTX crystal increased 10.88 times than raw PTX. These results suggested that PTX crystal powders might have potential value to become a new oral PTX formulation with high bioavailability.

Sign in / Sign up

Export Citation Format

Share Document