scholarly journals Protection of Urban Art Painting: A Laboratory Study

Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 162
Author(s):  
Andrea Macchia ◽  
Sara Capriotti ◽  
Laura Rivaroli ◽  
Silvestro Antonio Ruffolo ◽  
Mauro Francesco La Russa
Keyword(s):  
Electron Microscopy ◽  
Contact Angle ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Urban Spaces ◽  
Colorimetric Analysis ◽  
Urban Art ◽  
The Public ◽  
Outdoor Environments ◽  
Water Repellence

Urban art is a form of artistic visual expression and communication that is created in the street and generally in the public dimension of urban spaces. Often these kinds of artworks are in outdoor environments, and they usually suffer from atmospheric weathering and anthropic vandalism. Recently, several strategies have been used to limit or remove the effects of such vandalism. Currently, the use of quartz paints is growing among artists; such paints after setting are more porous and rough on the surface with respect to regular paints. The aim of the study is to assess the performance of anti-graffiti coatings on quartz artworks paints. Two anti-graffiti products were chosen, and their behaviors were assessed in the laboratory by means of contact angle measurement, water capillary test, colorimetric analysis, and optical and electron microscopy. Results showed good water repellence efficacy of the tested products, demonstrating that they are suitable for the protection of urban art, but at least two applications on the surface are needed to achieve good performance.

Preparation of TiO2–SiO2 Hybrid Nanosols Coated Flame-Retardant Polyester Fabric Possessing Dual Contradictory Characteristics of Superhydrophobicity and Self Cleaning Ability

2020 ◽  
Vol 20 (3) ◽  
pp. 1780-1789 ◽  
Author(s):  
Priyanka Katiyar ◽  
Shraddha Mishra ◽  
Anurag Srivastava ◽  
N. Eswara Prasad
Keyword(s):  
Electron Microscopy ◽  
Contact Angle ◽  
Flame Retardant ◽  
Protective Clothing ◽  
Sol Gel ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Water Contact ◽  
Vis Spectroscopy ◽  
Self Cleaning

TiO2, SiO2 and their hybrid nanocoatings are prepared on inherent flame retardant textile substrates from titanium(IV)iso-proproxide (TTIP) and tetraethoxysilane (TEOS) precursors using a sol–gel process followed by hydrothermal treatment. The coated samples are further functionalized by hexadecyltrimethoxysilane (HDTMS) to impart superhydrophobicity. Sample characterization of the nanosols, nanoparticles and coated samples are investigated using, X-ray diffractometer, transmission electron microscopy, scanning electron microscopy, UV-Vis spectroscopy, contact angle measurement. Stain degradation test under mild UV irradiation shows almost 54% degradation of coffee stain within 4 hours measured by Spectrophotometer. UV-Vis Absorption Spectroscopy demonstrates complete degradation of methyl orange colorant within 3 hours. Hybrid nanosol coated and HDTMS modified inherent flame retardant polyester surfaces show apparent water contact angle as ~145°, which is much closer to proximity of superhydrophobic surfaces. Thus, the novelty of present work is, by using sol–gel technique, a bi-functional textile surface has been developed which qualifies the very specific requirements of protective clothing like self-cleaning property (imparted by TiO2 nanoparticles) and superhydrophobicity (imparted by SiO2 nanoparticles and further surface modification by HDTMS), which are entirely contradictory in nature, in a single fabric itself. Thus developed textile surfaces also possess the other attributes of protective clothing like flame retardancy and air permeability.

Super-Hydrophobic Surfaces Improve Corrosion Resistance of Fe3Al-Type Intermetallic in Seawater

2008 ◽  
Vol 47-50 ◽  
pp. 173-176 ◽  
Author(s):  
Tao Liu ◽  
Kin Tak Lau ◽  
Shou Gang Chen ◽  
Sha Cheng ◽  
Yan Sheng Yin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Corrosion Resistance ◽  
Electrochemical Impedance ◽  
Hydrophobic Surface ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Atomic Force ◽  
Scanning Electron

A novel super-hydrophobic film was prepared by myristic acid (CH3(CH2)12COOH) chemically adsorbed onto the polyethyleneimine (PEI) coated Fe3Al-type intermetallic wafer. The film character and structure were probed with contact angle measurement, scanning electron microscopy (SEM) and atomic force microscope (AFM). The results suggest that the structure of the film is similar to lotus and the seawater contact angle is larger than 150◦. Moreover, the corrosion resistances of untreated and modified samples in seawater were investigated by electrochemical impedance spectroscopy (EIS). Experimental results show that the corrosion rate of Fe3Al-type intermetallic with super-hydrophobic surface decreases dramatically because of its special microstructure.

Improvement of Hydrophilic Properties on Electrospun Polyacrylonitrile Fabrics Surface by Plasma Treatment

2011 ◽  
Vol 213 ◽  
pp. 103-106
Author(s):  
A. Thongphud ◽  
P. Visal-athaphand ◽  
Pitt Supaphol ◽  
Boonchoat Paosawatyanyong
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Plasma Treatment ◽  
Inductively Couple Plasma ◽  
Chemical Properties ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Measured Contact Angle ◽  
Scanning Electron

Electrospun polyacrylonitrile (PAN) fabrics were prepared by electrospinning with 7%w/v concentration to dissolve in dimethylformamide (DMF) and spinning time 12 h. Radio frequency inductively couple plasma (RF-ICP) at 13.56 MHz were used to improve PAN fabrics surface by O2 gas in plasma treatment that became to hydrophilic properties of PAN fabrics surface. Physical properties were determined by scanning electron microscopy (SEM) and contact angle measurement which found that characterized on PAN fabrics surface after plasma treatment with increased treated time had been damaged on these fabrics surface which measured contact angle measurement with water were range 29.3 to 74.7. Chemical properties were analysed by fourier transform infrared spectroscopy (FTIR) that had been found peak intensities of aliphatic C-H band at 1450 and 2930 cm-1 and peak intensities of cyclic C=O bands at 1732 cm-1 and peak intensities of saturated nitriles at 2243 cm-1 and peak intensities of hydroxyl O-H band at 3600-3650 cm-1.

scholarly journals Superhydrophobic functionalized cellulosic paper by copper hydroxide nanorods for oils purification

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ahmed S. Belal ◽  
Jehan El Nady ◽  
Azza Shokry ◽  
Shaker Ebrahim ◽  
Moataz Soliman ◽  
...  
Keyword(s):  
Contact Angle ◽  
Filter Paper ◽  
Separation Efficiency ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Absorption Capacity ◽  
Morphological Properties ◽  
Copper Hydroxide ◽  
Immersion Method ◽  
Water Contact

AbstractOily water contamination has been sighted as one of the most global environmental pollution. Herein, copper hydroxide nanorods layer was constructed onto cellulosic filter paper surface cured with polydopamine, Ag nanoparticles, and Cu NPs through immersion method. This work has been aimed to produce a superhydrophobic and superoleophilic cellulosic filter paper. The structure, crystalline, and morphological properties of these modified cellulosic filter paper were investigated. Scanning electron microscope images confirmed that the modified surface was rougher compared with the pristine surface. The contact angle measurement confirmed the hydrophobic nature of these modified surfaces with a water contact angle of 169.7°. The absorption capacity was 8.2 g/g for diesel oil and the separation efficiency was higher than 99%. It was noted that the flux in the case of low viscosity solvent as n-hexane was 9663.5 Lm−2 h−1, while for the viscous oil as diesel was 1452.7 Lm−2 h−1.

Preparation and the Blood Compatibility of Titanium Oxide Nanorod Arrays

2011 ◽  
Vol 306-307 ◽  
pp. 25-30 ◽  
Author(s):  
Ping Luo ◽  
Zhan Yun Huang ◽  
Di Hu Chen
Keyword(s):  
Contact Angle ◽  
Surface Morphology ◽  
Titanium Oxide ◽  
Tin Oxide ◽  
Growth Parameters ◽  
Blood Compatibility ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Nanorod Arrays ◽  
Wetting Properties

In this work, titanium oxide nanorod arrays were fabricated by using the hydrothermal method on fluorine-doped tin oxide (FTO) coated glass. The diameter of the nanorods could be controlled from 150 nm to 30 nm by changing the growth parameters. The surface morphology and the structure of the samples were characterized by SEM and XRD. The wetting properties were identified by contact angle measurement. Platelet attachment was investigated to evaluate the blood compatibility of the samples with different nanoscale topographies. Results show that the nanotopographical surfaces perform outstanding blood compatibility, and the adhering platelet decreased with the increasing diameter of the nanorods.

Measurement of wheel-terrain contact angle for WMRs on rough terrain using laser scanning sensor

2017 ◽  
Vol 44 (6) ◽  
pp. 798-807 ◽  
Author(s):  
He Xu ◽  
Yan Xu ◽  
Peiyuan Wang ◽  
Hongpeng Yu ◽  
Ozoemena Anthony Ani ◽  
...  
Keyword(s):  
Contact Angle ◽  
Laser Scanning ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Rough Terrain ◽  
Wheeled Mobile Robots ◽  
Wheel Slip ◽  
Content Type ◽  
Terrain Model ◽  
Measurement Approach

Purpose The purpose of this paper is to explore a novel measurement approach for wheel-terrain contact angle using laser scanning sensors based on near-terrain perception. Laser scanning sensors have rarely been applied to the measurement of wheel-terrain contact angle for wheeled mobile robots (WMRs) in previous studies; however, it is an effective way to measure wheel-terrain contact angle directly with the advantages of simple, fast and high accuracy. Design/methodology/approach First, kinematics model for a WMR moving on rough terrain was developed, taking into consideration wheel slip and wheel-terrain contact angle. Second, the measurement principles of wheel-terrain contact angle using laser scanning sensors was presented, including “rigid wheel - rigid terrain” model and “rigid wheel - deformable terrain” model. Findings In the proposed approach, the measurement of wheel-terrain contact angle using laser scanning sensors was successfully demonstrated. The rationality of the approach was verified by experiments on rigid and sandy terrains with satisfactory results. Originality/value This paper proposes a novel, fast and effective wheel-terrain contact angle measurement approach for WMRs moving on both rigid and deformable terrains, using laser scanning sensors.

Contact Angle of Nepenthes alata Slippery Zone: Results from Measurement and Model Analysis

2021 ◽  
pp. 1-7
Author(s):  
Lixin Wang ◽  
Pan Pan ◽  
Shixing Yan ◽  
Shiyun Dong
Keyword(s):  
Contact Angle ◽  
Hierarchical Structures ◽  
Model Analysis ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Structure Characteristic ◽  
Baxter Equation ◽  
Measured Contact Angle ◽  
The Relationship ◽  
Contact Angle Analysis

The slippery zone of Nepenthes alata depends on its highly evolved morphology and structure to show remarkable superhydrophobicity, which has gradually become a biomimetic prototype for developing superhydrophobic materials. However, the mechanism governing this phenomenon has not been fully revealed through model analysis. In this paper, the superhydrophobicity of slippery zone is studied by contact angle measurement, morphology/structure examination and model analysis. The slippery zone causes ultrapure water droplet to produce a considerably high contact angle (155.11–158.30°), and has a micro-nano scale hierarchical structures consisting of lunate cells and wax coverings. According to the Cassie-Baxter equation and a self-defined infiltration coefficient, a model was established to analyze the effect of structure characteristic on the contact angle. Analysis result showed that the calculated contact angle (154.67–159.49°) was highly consistent with the measured contact angle, indicating that the established model can quantitatively characterize the relationship between the contact angle and the structure characteristic. Our study provides some evidences to further reveal the superhydrophobic mechanism of Nepenthes alata slippery zone, as well as inspires the biomimetic development of superhydrophobic surfaces.

Effect of 2D Alpha-Zirconium Phosphate Nanosheets in Interfacial Tension Reduction and Wettability Alteration: Implications for Enhanced Oil Recovery

SPE Journal ◽  
2022 ◽  
pp. 1-13
Author(s):  
Song Qing ◽  
Hong Chen ◽  
Li-juan Han ◽  
Zhongbin Ye ◽  
Yihao Liao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Interfacial Tension ◽  
Oil Recovery ◽  
Zirconium Phosphate ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Wettability Alteration ◽  
Tetrabutylammonium Hydroxide ◽  
Transmission Electron ◽  
2D Nanosheets

Summary α-Zirconium phosphate (α-ZrP) nanocrystals were synthesized by refluxing method and subsequently exfoliated into extremely thin 2D nanosheets by tetrabutylammonium hydroxide (TBAOH) solution. Dynamic light scattering, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to characterize the size distribution and morphology of α-ZrP nanosheets. Interfacial tension (IFT) and contact angle measurement were conducted by different concentrations of α-ZrP nanosheets solutions. The results displayed that the wettability of porous media surface was altered from oleophilic to hydrophilic and the IFT decreased with the increasing of α-ZrP nanosheets concentrations. A new method was proposed to calculate the Hamaker constant for 2D α-ZrP nanosheets. The calculated results displayed that α-ZrP nanosheets were not easy to agglomerate under experimental environment and when the interaction energy barrier increased, the transport amount of α-ZrP nanosheets also increased. Coreflooding tests were also performed with various concentrations and the oil recovery efficiency increased from 33.59 to 51.26% when α-ZrP nanosheets concentrations increased from 50 to 1,000 ppm.

Contact angle measurement on rough surfaces

2004 ◽  
Vol 274 (2) ◽  
pp. 637-644 ◽  
Author(s):  
Tammar S. Meiron ◽  
Abraham Marmur ◽  
I.Sam Saguy
Keyword(s):  
Contact Angle ◽  
Rough Surfaces ◽  
Contact Angle Measurement ◽  
Angle Measurement
Sign in / Sign up

Export Citation Format

Share Document