RSPD: A Novel Remote Sensing Index of Plant Biodiversity Combining Spectral Variation Hypothesis and Productivity Hypothesis

Plant diversity (PD) plays an important role in maintaining the healthy function of an ecosystem through affecting the productivity, stability, and nutrient utilization of a terrestrial ecosystem. Remote sensing is a vital way to monitor the status and changes of PD. Most of the existing methods rely on a field botany survey to construct a statistical relationship between PD and remote sensing observations. However, a field botany survey is too costly to be applied widely. In this study, we constructed a new remote sensing index of PD (RSPD), combining the spectral variation hypothesis and productivity hypothesis. Concretely, the RSPD integrated the multi-band spectral reflectance and several spectral greenness, moisture, and red-edge vegetation indices with the principles of Shannon information entropy and Euclidean distance. The RSPD was evaluated by comparing the classical coefficient of variation (CV) method and the Shannon and Simpson diversity indices based on vegetation classification results. Two cases were selected, where Case I was in Beijing and Case II was located in part of Huai’an, China. Sentinel-2 data in three years of 2016, 2018, and 2020 and higher-resolution Pléiades-1 data in 2018 were also utilized. The results demonstrate that: (1) the RSPD is basically consistent with the CV in spatiotemporal variation; (2) the RSPD outperforms the CV as compared with Shannon and Simpson diversity indices that are based on vegetation classification results with Sentinel-2 and Pléiades-1 data; (3) the RSPD outperforms the CV as compared with visual interpretations with Google Earth image. The suggested index can reflect the richness and evenness of plant species, which is inherent in its calculation formula. Moreover, it has a great potential for large-scale regional and long-term series monitoring.

Download Full-text

Enhancement of Detecting Permanent Water and Temporary Water in Flood Disasters by Fusing Sentinel-1 and Sentinel-2 Imagery Using Deep Learning Algorithms: Demonstration of Sen1Floods11 Benchmark Datasets

Remote Sensing ◽

10.3390/rs13112220 ◽

2021 ◽

Vol 13 (11) ◽

pp. 2220

Author(s):

Yanbing Bai ◽

Wenqi Wu ◽

Zhengxin Yang ◽

Jinze Yu ◽

Bo Zhao ◽

...

Keyword(s):

Remote Sensing ◽

Deep Learning ◽

Large Scale ◽

Learning Algorithms ◽

Flood Events ◽

Test Set ◽

Source Data ◽

Flood Disasters ◽

Temporary Water ◽

Sentinel 2

Identifying permanent water and temporary water in flood disasters efficiently has mainly relied on change detection method from multi-temporal remote sensing imageries, but estimating the water type in flood disaster events from only post-flood remote sensing imageries still remains challenging. Research progress in recent years has demonstrated the excellent potential of multi-source data fusion and deep learning algorithms in improving flood detection, while this field has only been studied initially due to the lack of large-scale labelled remote sensing images of flood events. Here, we present new deep learning algorithms and a multi-source data fusion driven flood inundation mapping approach by leveraging a large-scale publicly available Sen1Flood11 dataset consisting of roughly 4831 labelled Sentinel-1 SAR and Sentinel-2 optical imagery gathered from flood events worldwide in recent years. Specifically, we proposed an automatic segmentation method for surface water, permanent water, and temporary water identification, and all tasks share the same convolutional neural network architecture. We utilize focal loss to deal with the class (water/non-water) imbalance problem. Thorough ablation experiments and analysis confirmed the effectiveness of various proposed designs. In comparison experiments, the method proposed in this paper is superior to other classical models. Our model achieves a mean Intersection over Union (mIoU) of 52.99%, Intersection over Union (IoU) of 52.30%, and Overall Accuracy (OA) of 92.81% on the Sen1Flood11 test set. On the Sen1Flood11 Bolivia test set, our model also achieves very high mIoU (47.88%), IoU (76.74%), and OA (95.59%) and shows good generalization ability.

Download Full-text

Towards Vine Water Status Monitoring on a Large Scale Using Sentinel-2 Images

Remote Sensing ◽

10.3390/rs13091837 ◽

2021 ◽

Vol 13 (9) ◽

pp. 1837

Author(s):

Eve Laroche-Pinel ◽

Sylvie Duthoit ◽

Mohanad Albughdadi ◽

Anne D. Costard ◽

Jacques Rousseau ◽

...

Keyword(s):

Climate Change ◽

Water Potential ◽

Large Scale ◽

Water Status ◽

Vegetation Indices ◽

Machine Learning Algorithms ◽

Severe Drought ◽

Stem Water Potential ◽

Stem Water ◽

Sentinel 2

Wine growing needs to adapt to confront climate change. In fact, the lack of water becomes more and more important in many regions. Whereas vineyards have been located in dry areas for decades, so they need special resilient varieties and/or a sufficient water supply at key development stages in case of severe drought. With climate change and the decrease of water availability, some vineyard regions face difficulties because of unsuitable variety, wrong vine management or due to the limited water access. Decision support tools are therefore required to optimize water use or to adapt agronomic practices. This study aimed at monitoring vine water status at a large scale with Sentinel-2 images. The goal was to provide a solution that would give spatialized and temporal information throughout the season on the water status of the vines. For this purpose, thirty six plots were monitored in total over three years (2018, 2019 and 2020). Vine water status was measured with stem water potential in field measurements from pea size to ripening stage. Simultaneously Sentinel-2 images were downloaded and processed to extract band reflectance values and compute vegetation indices. In our study, we tested five supervised regression machine learning algorithms to find possible relationships between stem water potential and data acquired from Sentinel-2 images (bands reflectance values and vegetation indices). Regression model using Red, NIR, Red-Edge and SWIR bands gave promising result to predict stem water potential (R2=0.40, RMSE=0.26).

Download Full-text

Estimating Forest Canopy Cover by Multiscale Remote Sensing in Northeast Jiangxi, China

Land ◽

10.3390/land10040433 ◽

2021 ◽

Vol 10 (4) ◽

pp. 433

Author(s):

Xiaolan Huang ◽

Weicheng Wu ◽

Tingting Shen ◽

Lifeng Xie ◽

Yaozu Qin ◽

...

Keyword(s):

Remote Sensing ◽

Large Scale ◽

Forest Canopy ◽

Canopy Cover ◽

Google Earth ◽

Tree Canopy ◽

Landsat Data ◽

High Resolution Data ◽

Modis Ndvi ◽

Tree Canopy Cover

This research was focused on estimation of tree canopy cover (CC) by multiscale remote sensing in south China. The key aim is to establish the relationship between CC and woody NDVI (NDVIW) or to build a CC-NDVIW model taking northeast Jiangxi as an example. Based on field CC measurements, this research used Google Earth as a complementary source to measure CC. In total, 63 sample plots of CC were created, among which 45 were applied for modeling and the remaining 18 were employed for verification. In order to ascertain the ratio R of NDVIW to the satellite observed NDVI, a 20-year time-series MODIS NDVI dataset was utilized for decomposition to obtain the NDVIW component, and then the ratio R was calculated with the equation R = (NDVIW/NDVI) *100%, respectively, for forest (CC >60%), medium woodland (CC = 25–60%) and sparse woodland (CC 1–25%). Landsat TM and OLI images that had been orthorectified by the provider USGS were atmospherically corrected using the COST model and used to derive NDVIL. R was multiplied for the NDVIL image to extract the woody NDVI (NDVIWL) from Landsat data for each of these plots. The 45 plots of CC data were linearly fitted to the NDVIWL, and a model with CC = 103.843 NDVIW + 6.157 (R2 = 0.881) was obtained. This equation was applied to predict CC at the 18 verification plots and a good agreement was found (R2 = 0.897). This validated CC-NDVIW model was further applied to the woody NDVI of forest, medium woodland and sparse woodland derived from Landsat data for regional CC estimation. An independent group of 24 measured plots was utilized for validation of the results, and an accuracy of 83.0% was obtained. Thence, the developed model has high predictivity and is suitable for large-scale estimation of CC using high-resolution data.

Download Full-text

Multitemporal Mapping of Post-Fire Land Cover Using Multiplatform PRISMA Hyperspectral and Sentinel-UAV Multispectral Data: Insights from Case Studies in Portugal and Italy

Sensors ◽

10.3390/s21123982 ◽

2021 ◽

Vol 21 (12) ◽

pp. 3982

Author(s):

Giacomo Lazzeri ◽

William Frodella ◽

Guglielmo Rossi ◽

Sandro Moretti

Keyword(s):

Remote Sensing ◽

Large Scale ◽

Fire Severity ◽

Experimental Methodology ◽

Vegetation Recovery ◽

Burned Area ◽

Remotely Sensed Data ◽

The Impact ◽

Sentinel 2

Wildfires have affected global forests and the Mediterranean area with increasing recurrency and intensity in the last years, with climate change resulting in reduced precipitations and higher temperatures. To assess the impact of wildfires on the environment, burned area mapping has become progressively more relevant. Initially carried out via field sketches, the advent of satellite remote sensing opened new possibilities, reducing the cost uncertainty and safety of the previous techniques. In the present study an experimental methodology was adopted to test the potential of advanced remote sensing techniques such as multispectral Sentinel-2, PRISMA hyperspectral satellite, and UAV (unmanned aerial vehicle) remotely-sensed data for the multitemporal mapping of burned areas by soil–vegetation recovery analysis in two test sites in Portugal and Italy. In case study one, innovative multiplatform data classification was performed with the correlation between Sentinel-2 RBR (relativized burn ratio) fire severity classes and the scene hyperspectral signature, performed with a pixel-by-pixel comparison leading to a converging classification. In the adopted methodology, RBR burned area analysis and vegetation recovery was tested for accordance with biophysical vegetation parameters (LAI, fCover, and fAPAR). In case study two, a UAV-sensed NDVI index was adopted for high-resolution mapping data collection. At a large scale, the Sentinel-2 RBR index proved to be efficient for burned area analysis, from both fire severity and vegetation recovery phenomena perspectives. Despite the elapsed time between the event and the acquisition, PRISMA hyperspectral converging classification based on Sentinel-2 was able to detect and discriminate different spectral signatures corresponding to different fire severity classes. At a slope scale, the UAV platform proved to be an effective tool for mapping and characterizing the burned area, giving clear advantage with respect to filed GPS mapping. Results highlighted that UAV platforms, if equipped with a hyperspectral sensor and used in a synergistic approach with PRISMA, would create a useful tool for satellite acquired data scene classification, allowing for the acquisition of a ground truth.

Download Full-text

Remote Sensing of Sea Surface Artificial Floating Plastic Targets with Sentinel-2 and Unmanned Aerial Systems (Plastic Litter Project 2019)

Remote Sensing ◽

10.3390/rs12122013 ◽

2020 ◽

Vol 12 (12) ◽

pp. 2013

Author(s):

Konstantinos Topouzelis ◽

Dimitris Papageorgiou ◽

Alexandros Karagaitanakis ◽

Apostolos Papakonstantinou ◽

Manuel Arias Ballesteros

Keyword(s):

Remote Sensing ◽

Large Scale ◽

Field Experiments ◽

Spectral Unmixing ◽

Sea Surface ◽

Spectral Signature ◽

Unmanned Aerial Systems ◽

Real Environment ◽

Promising Tool ◽

Sentinel 2

Remote sensing is a promising tool for the detection of floating marine plastics offering extensive area coverage and frequent observations. While floating plastics are reported in high concentrations in many places around the globe, no referencing dataset exists either for understanding the spectral behavior of floating plastics in a real environment, or for calibrating remote sensing algorithms and validating their results. To tackle this problem, we initiated the Plastic Litter Projects (PLPs), where large artificial plastic targets were constructed and deployed on the sea surface. The first such experiment was realised in the summer of 2018 (PLP2018) with three large targets of 10 × 10 m. Hereafter, we present the second Plastic Litter Project (PLP2019), where smaller 5 × 5 m targets were constructed to better simulate near-real conditions and examine the limitations of the detection with Sentinel-2 images. The smaller targets and the multiple acquisition dates allowed for several observations, with the targets being connected in a modular way to create different configurations of various sizes, material composition and coverage. A spectral signature for the PET (polyethylene terephthalate) targets was produced through modifying the U.S. Geological Survey PET signature using an inverse spectral unmixing calculation, and the resulting signature was used to perform a matched filtering processing on the Sentinel-2 images. The results provide evidence that under suitable conditions, pixels with a PET abundance fraction of at least as low as 25% can be successfully detected, while pinpointing several factors that significantly impact the detection capabilities. To the best of our knowledge, the 2018 and 2019 Plastic Litter Projects are to date the only large-scale field experiments on the remote detection of floating marine litter in a near-real environment and can be used as a reference for more extensive validation/calibration campaigns.

Download Full-text

Melt Pond Retrieval Based on the LinearPolar Algorithm Using Landsat Data

Remote Sensing ◽

10.3390/rs13224674 ◽

2021 ◽

Vol 13 (22) ◽

pp. 4674

Author(s):

Yuqing Qin ◽

Jie Su ◽

Mingfeng Wang

Keyword(s):

Remote Sensing ◽

High Resolution ◽

Relative Error ◽

Large Scale ◽

The Arctic ◽

Landsat Data ◽

Melt Pond ◽

Melt Ponds ◽

Very High ◽

Sentinel 2

The formation and distribution of melt ponds have an important influence on the Arctic climate. Therefore, it is necessary to obtain more accurate information on melt ponds on Arctic sea ice by remote sensing. The present large-scale melt pond products, especially the melt pond fraction (MPF), still require verification, and using very high resolution optical satellite remote sensing data is a good way to verify the large-scale retrieval of MPF products. Unlike most MPF algorithms using very high resolution data, the LinearPolar algorithm using Sentinel-2 data considers the albedo of melt ponds unfixed. In this paper, by selecting the best band combination, we applied this algorithm to Landsat 8 (L8) data. Moreover, Sentinel-2 data, as well as support vector machine (SVM) and iterative self-organizing data analysis technique (ISODATA) algorithms, are used as the comparison and verification data. The results show that the recognition accuracy of the LinearPolar algorithm for melt ponds is higher than that of previous algorithms. The overall accuracy and kappa coefficient results achieved by using the LinearPolar algorithm with L8 and Sentinel-2A (S2), the SVM algorithm, and the ISODATA algorithm are 95.38% and 0.88, 94.73% and 0.86, and 92.40%and 0.80, respectively, which are much higher than those of principal component analysis (PCA) and Markus algorithms. The mean MPF (10.0%) obtained from 80 cases from L8 data based on the LinearPolar algorithm is much closer to Sentinel-2 (10.9%) than the Markus (5.0%) and PCA algorithms (4.2%), with a mean MPF difference of only 0.9%, and the correlation coefficients of the two MPFs are as high as 0.95. The overall relative error of the LinearPolar algorithm is 53.5% and 46.4% lower than that of the Markus and PCA algorithms, respectively, and the root mean square error (RMSE) is 30.9% and 27.4% lower than that of the Markus and PCA algorithms, respectively. In the cases without obvious melt ponds, the relative error is reduced more than that of those with obvious melt ponds because the LinearPolar algorithm can identify 100% of dark melt ponds and relatively small melt ponds, and the latter contributes more to the reduction in the relative error of MPF retrieval. With a wider range and longer time series, the MPF from Landsat data are more efficient than those from Sentinel-2 for verifying large-scale MPF products or obtaining long-term monitoring of a fixed area.

Download Full-text

Assessment of the State of the Territories of Closed Waste Disposal Facilities by Vegetation Indices

Ecology and Industry of Russia ◽

10.18412/1816-0395-2021-9-30-37 ◽

2021 ◽

Vol 25 (9) ◽

pp. 30-37

Author(s):

N.N. Sliusar ◽

A.P. Belousova ◽

G.M. Batrakova ◽

R.D. Garifzyanov ◽

M. Huber-Humer ◽

...

Keyword(s):

Remote Sensing ◽

Waste Disposal ◽

Vegetation Cover ◽

Vegetation Index ◽

Vegetation Indices ◽

Cost Effective ◽

Google Earth ◽

The State ◽

Landsat 8 ◽

The Earth

The possibilities of using remote sensing of the Earth data to assess the formation of phytocenoses at reclaimed dumps and landfills are presented. The objects of study are landfills and dumps in the Perm Territory, which differed from each other in the types and timing of reclamation work. The state of the vegetation cover on the reclaimed and self-overgrowing objects was compared with the reference plots with naturally formed herbage of zonal meadow vegetation. The process of reclamation of the territory of closed landfills was assessed by the presence and homogeneity of the vegetation layer and by the values of the vegetation index NDVI. To identify the dynamics of changes in the vegetation cover, we used multi-temporal satellite images from the open resources of Google Earth and images in the visible and infrared ranges of the Landsat-5/TM and Landsat-8/OLI satellites. It is shown that the data of remote sensing of the Earth, in particular the analysis of vegetation indices, can be used to assess the dynamics of overgrowing of territories of reclaimed waste disposal facilities, as well as an additional and cost-effective method for monitoring the restoration of previously disturbed territories.

Download Full-text

Recognition of Water Colour Anomaly by Using Hue Angle and Sentinel 2 Image

Remote Sensing ◽

10.3390/rs12040716 ◽

2020 ◽

Vol 12 (4) ◽

pp. 716 ◽

Cited By ~ 2

Author(s):

Yelong Zhao ◽

Qian Shen ◽

Qian Wang ◽

Fan Yang ◽

Shenglei Wang ◽

...

Keyword(s):

Remote Sensing ◽

Water Body ◽

Large Scale ◽

Measured Data ◽

Water Bodies ◽

Polluted Water ◽

Water Colour ◽

Hue Angle ◽

Anomalous Water ◽

Sentinel 2

As polluted water bodies are often small in area and widely distributed, performing artificial field screening is difficult; however, remote-sensing-based screening has the advantages of being rapid, large-scale, and dynamic. Polluted water bodies often show anomalous water colours, such as black, grey, and red. Therefore, the large-scale recognition of suspected polluted water bodies through high-resolution remote-sensing images and water colour can improve the screening efficiency and narrow the screening scope. However, few studies have been conducted on such kinds of water bodies. The hue angle of a water body is a parameter used to describe colour in the International Commission on Illumination (CIE) colour space. Based on the measured data, the water body with a hue angle greater than 230.958° is defined as a water colour anomaly, which is recognised based on the Sentinel-2 image through the threshold set in this study. The results showed that the hue angle of the water body was extracted from the Sentinel-2 image, and the accuracy of the hue angle calculated by the in situ remote-sensing reflectance Rrs (λ) was evaluated, where the root mean square error (RMSE) and mean relative error (MRE) were 4.397° and 1.744%, respectively, proving that this method is feasible. The hue angle was calculated for a water colour anomaly and a general water body in Qiqihar. The water body was regarded as a water colour anomaly when the hue angle was >230.958° and as a general water body when the hue angle was ≤230.958°. High-quality Sentinel-2 images of Qiqihar taken from May 2016 to August 2019 were chosen, and the position of the water body remained unchanged; there was no error or omission, and the hue angle of the water colour anomaly changed obviously, indicating that this method had good stability. Additionally, the method proposed is only suitable for optical deep water, not for optical shallow water. When this method was applied to Xiong’an New Area, the results showed good recognition accuracy, demonstrating good universality of this method. In this study, taking Qiqihar as an example, a surface survey experiment was conducted from October 14 to 15, 2018, and the measured data of six general and four anomalous water sample points were obtained, including water quality terms such as Rrs (λ), transparency, water colour, water temperature, and turbidity.

Download Full-text

Operational Large-Scale Segmentation of Imagery Based on Iterative Elimination

Remote Sensing ◽

10.3390/rs11060658 ◽

2019 ◽

Vol 11 (6) ◽

pp. 658 ◽

Cited By ~ 10

Author(s):

James Shepherd ◽

Pete Bunting ◽

John Dymond

Keyword(s):

Remote Sensing ◽

Image Segmentation ◽

Large Scale ◽

Ground Cover ◽

Spectral Signature ◽

Spectral Variation ◽

Alos Palsar ◽

Mapping Unit ◽

Minimum Mapping Unit ◽

Gis Software

Image classification and interpretation are greatly aided through the use of image segmentation. Within the field of environmental remote sensing, image segmentation aims to identify regions of unique or dominant ground cover from their attributes such as spectral signature, texture and context. However, many approaches are not scalable for national mapping programmes due to limits in the size of images that can be processed. Therefore, we present a scalable segmentation algorithm, which is seeded using k-means and provides support for a minimum mapping unit through an innovative iterative elimination process. The algorithm has also been demonstrated for the segmentation of time series datasets capturing both the intra-image variation and change regions. The quality of the segmentation results was assessed by comparison with reference segments along with statistics on the inter- and intra-segment spectral variation. The technique is computationally scalable and is being actively used within the national land cover mapping programme for New Zealand. Additionally, 30-m continental mosaics of Landsat and ALOS-PALSAR have been segmented for Australia in support of national forest height and cover mapping. The algorithm has also been made freely available within the open source Remote Sensing and GIS software Library (RSGISLib).

Download Full-text

Garlic and Winter Wheat Identification Based on Active and Passive Satellite Imagery and the Google Earth Engine in Northern China

Remote Sensing ◽

10.3390/rs12213539 ◽

2020 ◽

Vol 12 (21) ◽

pp. 3539

Author(s):

Haifeng Tian ◽

Jie Pei ◽

Jianxi Huang ◽

Xuecao Li ◽

Jian Wang ◽

...

Keyword(s):

Remote Sensing ◽

Winter Wheat ◽

Satellite Imagery ◽

Remote Sensing Data ◽

Northern China ◽

Google Earth ◽

Kappa Coefficient ◽

Landsat 8 ◽

Winter Crops ◽

Sentinel 2

Garlic and winter wheat are major economic and grain crops in China, and their boundaries have increased substantially in recent decades. Updated and accurate garlic and winter wheat maps are critical for assessing their impacts on society and the environment. Remote sensing imagery can be used to monitor spatial and temporal changes in croplands such as winter wheat and maize. However, to our knowledge, few studies are focusing on garlic area mapping. Here, we proposed a method for coupling active and passive satellite imagery for the identification of both garlic and winter wheat in Northern China. First, we used passive satellite imagery (Sentinel-2 and Landsat-8 images) to extract winter crops (garlic and winter wheat) with high accuracy. Second, we applied active satellite imagery (Sentinel-1 images) to distinguish garlic from winter wheat. Third, we generated a map of the garlic and winter wheat by coupling the above two classification results. For the evaluation of classification, the overall accuracy was 95.97%, with a kappa coefficient of 0.94 by eighteen validation quadrats (3 km by 3 km). The user’s and producer’s accuracies of garlic are 95.83% and 95.85%, respectively; and for the winter wheat, these two accuracies are 97.20% and 97.45%, respectively. This study provides a practical exploration of targeted crop identification in mixed planting areas using multisource remote sensing data.

Download Full-text