scholarly journals Disposable Voltammetric Immunosensors Integrated with Microfluidic Platforms for Biomedical, Agricultural and Food Analyses: A Review

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4124 ◽  
Author(s):  
Fabiana Felix ◽  
Alexandre Baccaro ◽  
Lúcio Angnes
Keyword(s):  
Quality Management ◽  
Signal Amplification ◽  
Screen Printing ◽  
Point Of Care ◽  
Microfluidic Devices ◽  
Strong Interactions ◽  
Point Of Care Testing ◽  
Microfluidic Platforms ◽  
Broad Variety ◽  
Interesting Alternative

Disposable immunosensors are analytical devices used for the quantification of a broad variety of analytes in different areas such as clinical, environmental, agricultural and food quality management. They detect the analytes by means of the strong interactions between antibodies and antigens, which provide concentration-dependent signals. For the herein highlighted voltammetric immunosensors, the analytical measurements are due to changes in the electrical signals on the surface of the transducers. The possibility of using disposable and miniaturized immunoassays is a very interesting alternative for voltammetric analyses, mainly, when associated with screen-printing technologies (screen-printed electrodes, SPEs), and microfluidic platforms. The aim of this paper is to discuss a carefully selected literature about different examples of SPEs-based immunosensors associated with microfluidic technologies for diseases, food, agricultural and environmental analysis. Technological aspects of the development of the voltammetric immunoassays such as the signal amplification, construction of paper-based microfluidic platforms and the utilization of microfluidic devices for point-of-care testing will be presented as well.

Magnetic Digital Microfluidics for Point-of-Care Testing: Where Are We Now?

2020 ◽  
Vol 27 ◽  
Author(s):  
Yi Zhang
Keyword(s):  
System Integration ◽  
Diagnostic Tests ◽  
Point Of Care ◽  
Digital Microfluidics ◽  
Controlled Environment ◽  
Point Of Care Testing ◽  
Microfluidic Platforms ◽  
Interface System ◽  
Technical Issues ◽  
Sample System

: Point-of-care (POC) testing decentralizes the diagnostic tests to the sites near the patient. Many POC tests rely microfluidic platforms for sample-to-answer analysis. Compared to other microfluidic systems, magnetic digital microfluidics demonstrate compelling advantages for POC diagnostics. In this review, we have examined the capability of magnetic digital microfluidics-based POC diagnostic platforms. More importantly, we have categorized POC settings into three classes based on “where is the point”, “who to care” and “how to test”, and evaluated the suitability of magnetic digital microfluidics in various POC settings. Furthermore, we have addressed other technical issues associated with POC testing such as controlled environment, sample-system interface, system integration and information connectivity. We hope this review would provide a guideline for the future development of magnetic digital microfluidics-based platforms for POC testing.

scholarly journals Quality Management for Point-Of-Care Testing of Pathogen Nucleic Acids: Chinese Expert Consensus

2021 ◽  
Vol 11 ◽  
Author(s):  
Xi Mo ◽  
Xueliang Wang ◽  
Zhaoqin Zhu ◽  
Yuetian Yu ◽  
Dong Chang ◽  
...  
Keyword(s):  
Public Health ◽  
Nucleic Acid ◽  
Quality Management ◽  
Clinical Laboratory ◽  
Point Of Care ◽  
Conventional Polymerase Chain Reaction ◽  
Laboratory Medicine ◽  
Expert Consensus ◽  
Nucleic Acid Detection ◽  
Point Of Care Testing

COVID-19 continues to circulate globally in 2021, while under the precise policy implementation of China’s public health system, the epidemic was quickly controlled, and society and the economy have recovered. During the pandemic response, nucleic acid detection of SARS-CoV-2 has played an indispensable role in the first line of defence. In the cases of emergency operations or patients presenting at fever clinics, nucleic acid detection is required to be performed and reported quickly. Therefore, nucleic acid point-of-care testing (POCT) technology for SARS-CoV-2 identification has emerged, and has been widely carried out at all levels of medical institutions. SARS-CoV-2 POCT has served as a complementary test to conventional polymerase chain reaction (PCR) batch tests, thus forming an experimental diagnosis platform that not only guarantees medical safety but also improves quality services. However, in view of the complexity of molecular diagnosis and the biosafety requirements involved, pathogen nucleic acid POCT is different from traditional blood-based physical and chemical index detection. No guidelines currently exist for POCT quality management, and there have been inconsistencies documented in practical operation. Therefore, Shanghai Society of Molecular Diagnostics, Shanghai Society of Laboratory Medicine, Clinical Microbiology Division of Shanghai Society of Microbiology and Shanghai Center for Clinical Laboratory have cooperated with experts in laboratory medicine to generate the present expert consensus. Based on the current spectrum of major infectious diseases in China, the whole-process operation management of pathogen POCT, including its application scenarios, biosafety management, personnel qualification, performance verification, quality control, and result reporting, are described here. This expert consensus will aid in promoting the rational application and robust development of this technology in public health defence and hospital infection management.

scholarly journals Elasto-Magnetic Pumps Integrated within Microfluidic Devices

2021 ◽  
Vol 4 (1) ◽  
pp. 48
Author(s):  
Jacob L. Binsley ◽  
Elizabeth L. Martin ◽  
Thomas O. Myers ◽  
Stefano Pagliara ◽  
Feodor Y. Ogrin
Keyword(s):  
Magnetic System ◽  
Point Of Care ◽  
Microfluidic Channel ◽  
Lab On A Chip ◽  
Microfluidic Devices ◽  
Point Of Care Testing ◽  
Ongoing Research ◽  
Flow Rates ◽  
Pumping System ◽  
Oscillating Magnetic Field

Many lab-on-a-chip devices require a connection to an external pumping system in order to perform their function. While this is not problematic in typical laboratory environments, it is not always practical when applied to point-of-care testing, which is best utilized outside of the laboratory. Therefore, there has been a large amount of ongoing research into producing integrated microfluidic components capable of generating effective fluid flow from on-board the device. This research aims to introduce a system that can produce practical flow rates, and be easily fabricated and actuated using readily available techniques and materials. We show how an asymmetric elasto-magnetic system, inspired by Purcell’s three-link swimmer, can provide this solution through the generation of non-reciprocal motion in an enclosed environment. The device is fabricated monolithically within a microfluidic channel at the time of manufacture, and is actuated using a weak, oscillating magnetic field. The flow rate can be altered dynamically, and the direction of the resultant flow can be controlled by adjusting the frequency of the driving field. The device has been proven, experimentally and numerically, to operate effectively when applied to fluids with a range of viscosities. Such a device may be able to replace external pumping systems in portable applications.

Catalytic hairpin assembly mediated liposome-encoded magnetic beads for signal amplification of peroxide test strip based point-of-care testing of ricin

2020 ◽  
Vol 56 (90) ◽  
pp. 14091-14094
Author(s):  
Qi Chao Ye ◽  
Chen Men ◽  
Yuan Fang Li ◽  
Jia Jun Liu ◽  
Cheng Zhi Huang ◽  
...  
Keyword(s):  
Glucose Oxidase ◽  
Signal Amplification ◽  
Magnetic Beads ◽  
Point Of Care ◽  
Test Strip ◽  
Point Of Care Testing ◽  
Catalytic Hairpin Assembly

In this study, a point-of-care testing (POCT) method for the detection of ricin B-chain (RTB) using a commercial peroxide test strip (PTS) combined with signal amplification via glucose oxidase-loaded liposome and catalytic hairpin assembly (CHA) was reported.

scholarly journals Microfluidic devices powered by integrated elasto-magnetic pumps

Lab on a Chip ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 4285-4295
Author(s):  
Jacob L. Binsley ◽  
Elizabeth L. Martin ◽  
Thomas O. Myers ◽  
Stefano Pagliara ◽  
Feodor Y. Ogrin
Keyword(s):  
Point Of Care ◽  
Microfluidic Devices ◽  
Point Of Care Testing

Integrated elasto-magnetic pumps power portable microfluidic devices for point of care testing.

Integrated paper-based microfluidic devices for point-of-care testing

2018 ◽  
Vol 10 (29) ◽  
pp. 3567-3581 ◽  
Author(s):  
Tian Tian ◽  
Yunpeng Bi ◽  
Xing Xu ◽  
Zhi Zhu ◽  
Chaoyong Yang
Keyword(s):  
Signal Transduction ◽  
Point Of Care ◽  
Sample Pretreatment ◽  
Microfluidic Devices ◽  
Point Of Care Testing

This review highlights the developments, accomplishments and challenges of integrated μPADs, including sample pretreatment, signal transduction/amplification and results output.

scholarly journals A Compact, Syringe-Assisted, Vacuum-Driven Micropumping Device

Micromachines ◽  
2019 ◽  
Vol 10 (8) ◽  
pp. 543 ◽  
Author(s):  
Anyang Wang ◽  
Domin Koh ◽  
Philip Schneider ◽  
Evan Breloff ◽  
Kwang W. Oh
Keyword(s):  
Microfluidic Device ◽  
Point Of Care ◽  
Microfluidic Devices ◽  
Microfluidic Channels ◽  
Constant Flow ◽  
Proof Of Concept ◽  
Point Of Care Testing ◽  
Microfluidic Mixing ◽  
Pumping System ◽  
Dead End

In this paper, a simple syringe‑assisted pumping method is introduced. The proposed fluidic micropumping system can be used instead of a conventional pumping system which tends to be large, bulky, and expensive. The micropump was designed separately from the microfluidic channels and directly bonded to the outlet of the microfluidic device. The pump components were composed of a dead‑end channel which was surrounded by a microchamber. A syringe was then connected to the pump structure by a short tube, and the syringe plunger was manually pulled out to generate low pressure inside the microchamber. Once the sample was loaded in the inlet, air inside the channel diffused into the microchamber through the PDMS (polydimethylsiloxane) wall, acting as a dragging force and pulling the sample toward the outlet. A constant flow with a rate that ranged from 0.8 nl · s − 1 to 7.5 nl · s − 1 was achieved as a function of the geometry of the pump, i.e., the PDMS wall thickness and the diffusion area. As a proof-of-concept, microfluidic mixing was demonstrated without backflow. This method enables pumping for point-of-care testing (POCT) with greater flexibility in hand-held PDMS microfluidic devices.

Sign in / Sign up

Export Citation Format

Share Document