scholarly journals Sensing Region Characteristics of Smart Piezoelectric Interface for Damage Monitoring in Plate-Like Structures

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1377 ◽  
Author(s):  
Thanh-Canh Huynh ◽  
So-Young Lee ◽  
Ngoc-Loi Dang ◽  
Jeong-Tae Kim
Keyword(s):  
Lead Zirconate Titanate ◽  
Lead Zirconate ◽  
Fe Analysis ◽  
Fe Model ◽  
Experimental Examination ◽  
Bolted Connection ◽  
Damage Location ◽  
Damage Monitoring ◽  
Piezoelectric Devices ◽  
Plate System

For impedance-based damage detection practices, the sensing range of piezoelectric devices is an important parameter that should be determined before real implementations. This study presents numerical and experimental analyses for characterizing the sensing region of a smart PZT (lead–zirconate–titanate) interface for damage monitoring in plate-like structures. First, a finite element (FE) model of the PZT interface mounted on a plate structure is established. The impedance responses of the PZT interface are numerically simulated under different damage locations inflicted in the plate domain. The impedance features are extracted from the impedance signatures to analyze the sensing distance and the damage detectability of the PZT interface. Next, the splice plate of a bolted connection is selected as a practical plate-like structure for the experimental examination of the PZT interface’s sensing region on a limited plate domain. The damage sensitivity behavior of the PZT interface is analyzed with respect to the damage location on the splice plate. An FE analysis of the corresponding PZT interface-splice plate system is also conducted to support the experimental results.

scholarly journals Sensitivity of Piezoelectric-Based Smart Interfaces to Structural Damage in Bolted Connections

Sensors ◽  
2019 ◽  
Vol 19 (17) ◽  
pp. 3670 ◽  
Author(s):  
Huynh ◽  
Ho ◽  
Dang ◽  
Kim
Keyword(s):  
Lead Zirconate Titanate ◽  
Structural Damage ◽  
Element Model ◽  
Lead Zirconate ◽  
Bolted Connection ◽  
Monitoring Technique ◽  
Damage Monitoring ◽  
Connection System ◽  
Detection Capabilities ◽  
Bolt Loosening

This study presents a set of experimental and numerical investigations to study the sensitivity of the piezoelectric-based smart interface device to structural damage in a bolted connection. The study aims to identify the proper geometric sizes of smart interfaces for damage detection tasks. First, the fundamentals of the damage monitoring technique via lead zirconate titanate(PZT) interface is briefly described for a bolted connection. Second, a lab-scaled girder connection is selected as the test structure for the experimental investigation. PZT interface prototypes with varying geometric sizes are designed for the test connection. Under the bolt-loosening inflicted in the connection, the impedance responses of the PZT interfaces are analyzed to understand the effect of geometric parameters on the damage sensitivity of the impedance responses. Subsequently, the bolt-loosening detection capabilities of the PZT interfaces are comparatively evaluated for identifying the proper geometric sizes of the devices. Finally, a finite element model of the PZT interface-bolted connection system is established for the numerical investigation. The damage sensitivity of the numerical impedance responses is compared with the experimental results for the verification.

Fabrication of Thick, Sol Gel Pzt Films: Applications to Macroscopic Piezoelectric Devices

1994 ◽  
Vol 360 ◽  
Author(s):  
D.A. Barrow ◽  
T.E. Petroff ◽  
M. Sayer
Keyword(s):  
Lead Zirconate Titanate ◽  
Sol Gel ◽  
Low Frequency ◽  
Lead Zirconate ◽  
Resonant Vibrations ◽  
Pzt Film ◽  
Sol Gel Process ◽  
Pzt Films ◽  
High Frequency Resonance ◽  
Piezoelectric Devices

AbstractLead zirconate titanate (PZT) films of up to 60 μm in thickness have been fabricated on a wide variety of substrates using a new sol gel process. The dielectric properties (∈ = 900), ferroelectric (Ec = 16 kV/cm and Pr = 35 μC/cm 2) and piezoelectric properties are comparable to bulk values. The characteristic Curie point of these films is at 420 °C. Piezoelectric actuators have been developed by depositing thick PZT films on both planar and coaxial substrates. Stainless steel cantilevers and optical fibres coated with a PZT film exhibit flexure mode resonant vibrations observable with the naked eye. A low frequency in-line fibre optic modulator has been developed using a PZT coated optical fibre. The high frequency resonance of a 60 μm film on a aluminum substrate has been observed.

Study on the Piezoelectric Behavior and Structural Changes of Strontium Doped PZT Ceramics

2016 ◽  
Vol 869 ◽  
pp. 13-18
Author(s):  
Margarete Soares da Silva ◽  
Lucas L. Silva ◽  
Eliane F. Souza ◽  
Elson Longo ◽  
Maria A. Zaghete ◽  
...  
Keyword(s):  
Lead Zirconate Titanate ◽  
Room Temperature ◽  
Structural Changes ◽  
Piezoelectric Properties ◽  
Lead Zirconate ◽  
Strontium Content ◽  
Pzt Ceramics ◽  
Ceramic Samples ◽  
Piezoelectric Behavior ◽  
Piezoelectric Devices

Some piezoelectric properties of lead zirconate titanate PbZr0.53Ti0.47O3 ceramic samples sintered at 1100oC for 3 hours has been investigated in this work and compared to the strontium modification at 0.2, 0.4, and 0.6 mol%. Polarization versus Electric Field curve and d33 and Kp piezoelectric parameters was taken at room temperature in order to investigate the correlation with phase amount and lattice parameters of crystalline phases calculated through Rietveld refinement. The results indicated the lead substitution with 0.4 mol% of strontium enhances the d33 and Kp piezoelectric parameters, but there is no systematic variation of the piezoelectric properties with strontium content. By the other hand, tetragonal phase seems plays an important rule on piezoelectric devices operating near the room temperature and some correlations could be found.

Experimental investigations on seismic damage monitoring of concrete dams using distributed lead zirconate titanate sensor network

2016 ◽  
Vol 20 (2) ◽  
pp. 170-179 ◽  
Author(s):  
Yu Zhang ◽  
Xin Feng ◽  
Zhe Fan ◽  
Shuang Hou ◽  
Tong Zhu ◽  
...  
Keyword(s):  
Damage Detection ◽  
Sensor Network ◽  
Lead Zirconate Titanate ◽  
Detection System ◽  
Lead Zirconate ◽  
Seismic Damage ◽  
Earthquake Ground Motion ◽  
Concrete Dams ◽  
Zirconate Titanate ◽  
Damage Monitoring

Seismic damage detection of concrete dams has always attracted much attention in hydraulic structure community. In this article, a novel seismic damage detection system was developed to perform seismic damage monitoring in concrete dams. As its importance in achieving the dam damage detection, the arrangement of a distributed lead zirconate titanate sensor network was introduced in detail. A dam model system with a distributed lead zirconate titanate sensor network was used as an object for verification. A shaking table was used to simulate the earthquake ground motion for the object to be tested. The seismic damage detection system could be used in not only the seismic damage process monitoring by measuring the dynamic stress history but also the distributed detecting of the dam damaged region. By analyzing the sensor signals, the emergence and development of the structural damages could be monitored timely. A damage index matrix was presented to evaluate the damage status of the dam in different paths. The experimental results verified the timeliness and the effectiveness of the proposed method.

A molecular perovskite solid solution with piezoelectricity stronger than lead zirconate titanate

Science ◽  
2019 ◽  
Vol 363 (6432) ◽  
pp. 1206-1210 ◽  
Author(s):  
Wei-Qiang Liao ◽  
Dewei Zhao ◽  
Yuan-Yuan Tang ◽  
Yi Zhang ◽  
Peng-Fei Li ◽  
...  
Keyword(s):  
Solid Solution ◽  
Lead Zirconate Titanate ◽  
High Performance ◽  
Piezoelectric Coefficient ◽  
Piezoelectric Materials ◽  
Lead Zirconate ◽  
Sensing Applications ◽  
Different Types ◽  
Potential Applications ◽  
Piezoelectric Devices

Piezoelectric materials produce electricity when strained, making them ideal for different types of sensing applications. The most effective piezoelectric materials are ceramic solid solutions in which the piezoelectric effect is optimized at what are termed morphotropic phase boundaries (MPBs). Ceramics are not ideal for a variety of applications owing to some of their mechanical properties. We synthesized piezoelectric materials from a molecular perovskite (TMFM)x(TMCM)1–xCdCl3 solid solution (TMFM, trimethylfluoromethyl ammonium; TMCM, trimethylchloromethyl ammonium, 0 ≤ x ≤ 1), in which the MPB exists between monoclinic and hexagonal phases. We found a composition for which the piezoelectric coefficient d33 is ~1540 picocoulombs per newton, comparable to high-performance piezoelectric ceramics. The material has potential applications for wearable piezoelectric devices.

Convergent-bceam diffraction studies on lead zirconate titanate Ceramics

1986 ◽  
Vol 44 ◽  
pp. 482-483
Author(s):  
M.L.A. Dass ◽  
T.A. Bielicki ◽  
G. Thomas ◽  
T. Yamamoto ◽  
K. Okazaki
Keyword(s):  
Lead Zirconate Titanate ◽  
Direct Proof ◽  
Lead Zirconate ◽  
Subsolidus Phase ◽  
Pzt Ceramics ◽  
Subsolidus Phase Diagram ◽  
Zirconate Titanate ◽  
Two Phases ◽  
Cbd Method ◽  
Titanate Ceramics

Lead zirconate titanate, Pb(Zr,Ti)O3 (PZT), ceramics are ferroelectrics formed as solid solutions between ferroelectric PbTiO3 and ant iferroelectric PbZrO3. The subsolidus phase diagram is shown in figure 1. PZT transforms between the Ti-rich tetragonal (T) and the Zr-rich rhombohedral (R) phases at a composition which is nearly independent of temperature. This phenomenon is called morphotropism, and the boundary between the two phases is known as the morphotropic phase boundary (MPB). The excellent piezoelectric and dielectric properties occurring at this composition are believed to.be due to the coexistence of T and R phases, which results in easy poling (i.e. orientation of individual grain polarizations in the direction of an applied electric field). However, there is little direct proof of the coexistence of the two phases at the MPB, possibly because of the difficulty of distinguishing between them. In this investigation a CBD method was found which would successfully differentiate between the phases, and this was applied to confirm the coexistence of the two phases.

Ion Beam Sputter Deposition Of Ferroelectric Oxide Thin Films

1991 ◽  
Vol 223 ◽  
Author(s):  
Thomas M. Graettinger ◽  
O. Auciello ◽  
M. S. Ameen ◽  
H. N. Al-Shareef ◽  
K. Gifford ◽  
...  
Keyword(s):  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Growth Parameters ◽  
Ion Beam ◽  
Lead Zirconate ◽  
Electro Optic ◽  
Integrated Optical ◽  
Pzt Films ◽  
Ion Beam Sputter Deposition ◽  
Ferroelectric Oxide

ABSTRACTFerroelectric oxide films have been studied for their potential application as integrated optical materials and nonvolatile memories. Electro-optic properties of potassium niobate (KNbO3) thin films have been measured and the results correlated to the microstructures observed. The growth parameters necessary to obtain single phase perovskite lead zirconate titanate (PZT) thin films are discussed. Hysteresis and fatigue measurements of the PZT films were performed to determine their characteristics for potential memory devices.

Mathematical model to predict the characteristics of polarization in dielectric materials: The concept of piezoelectrcity and electrostriction

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Mathematical Model ◽  
Electric Field ◽  
Lead Zirconate Titanate ◽  
Dielectric Material ◽  
Strain Curve ◽  
Dielectric Materials ◽  
Lead Zirconate ◽  
Simulation Software ◽  
Constitutive Law ◽  
Basic Material

Model was developed for the prediction of polarization characteristics in a dielectric material exhibiting piezoelectricity and electrostriction based on mathematical equations and MATLAB computer simulation software. The model was developed based on equations of polarization and piezoelectric constitutive law and the functional coefficient of Lead Zirconate Titanate (PZT) crystal material used was 2.3×10-6 m (thickness), the model further allows the input of basic material and calculation of parameters of applied voltage levels, applied stress, pressure, dielectric material properties and so on, to generate the polarization curve, strain curve and the expected deformation change in the material length charts. The mathematical model revealed that an application of 5 volts across the terminals of a 2.3×10-6 m thick dielectric material (PZT) predicted a 1.95×10-9 m change in length of the material, which indicates piezoelectric properties. Both polarization and electric field curve as well as strain and voltage curve were also generated and the result revealed a linear proportionality of the compared parameters, indicating a resultant increase in the electric field yields higher polarization of the dielectric materials atmosphere.

Sign in / Sign up

Export Citation Format

Share Document