scholarly journals Design Methodology for Street-Oriented Block Housing Considering Daylight and Natural Ventilation

2018 ◽  
Vol 10 (9) ◽  
pp. 3154 ◽  
Author(s):  
Ho-Jeong Kim ◽  
Jin-Soo Kim
Keyword(s):  
Path Planning ◽  
Design Methodology ◽  
Natural Ventilation ◽  
Residential Buildings ◽  
Air Flow ◽  
Small Scale ◽  
Exterior Space ◽  
Housing Design ◽  
Continuous Access ◽  
Prevailing Wind Direction

This study presents a design methodology for street-oriented block housing, as a model for gradual small-scale block-unit development, that can secure two hours of continuous access to daylight on the winter solstice at azimuth angles of 0° and 60° in Seoul, South Korea, and, in addition, developed a methodology for wind path planning for existing types of developed housing. The results of this study have confirmed the feasibility of a housing design that can secure two hours of continuous access to daylight along with no less than 200 percent of development density, achieved through the elimination of self-shadows by using distances between residential buildings and shadow characteristics according to azimuth angles. In addition, the study identified an air flow stagnation section by assessing the air flow of the exterior space of street-oriented block housing in consideration of day-lit environments, and examined a planning model that can enhance natural ventilation potential by activating the air flow of the exterior space. Wind path planning was conducted for 24 alternatives that were produced based on the developed design methodology, and the wind velocity ratio of street-oriented block housing ranged from 0.34 to 0.59. In terms of disadvantages of street-oriented block housing in securing wind paths, this study confirmed that air flow could be strengthened by adjusting the form of the lower-part opening, which is open in the direction of incoming wind, designing a staggered mass layout in high-rise masses, and combining building floor heights. The above findings of this study suggest that a performance-based approach is necessary for the improvement of environmental performance in street-oriented block housing, in consideration of azimuth angles and the prevailing wind direction from the initial phase of planning.

scholarly journals Análisis teórico de una chimenea solar con tres canales de flujo de aire

2019 ◽  
pp. 13-19
Author(s):  
Angel Tlatelpa-Becerro ◽  
Ramiro Rico-Martínez ◽  
Gustavo Urquiza-Beltrán ◽  
Elva Lilia Reynoso-Jardón
Keyword(s):  
Natural Ventilation ◽  
Single Channel ◽  
Residential Buildings ◽  
Air Flow ◽  
Tropical Region ◽  
Solar Chimney ◽  
Climatic Zones ◽  
The Cost ◽  
Energy Balances ◽  
Ventilation Systems

A solar chimney configuration consisting of three air flow channels divided by two metallic plate, placed in the center of the chimney between two acrylic covers, leading to symmetric air flow, is proposed as an alternative for the design of natural ventilation systems for buildings in tropical and subtropical climatic zones The solar chimney dimensions are 2.0 m height, 1.0 m width, and gap between channels of 0.30 m. These dimensions are appropriate for the design of ventilation systems for residential buildings in central México. A Numerical simulation using the global mass and energy balances in steady state was utilized to evaluate the efficacy of the proposed configuration. The temperature profiles, calculated for a typical hot day in a tropical region, reveal that the configuration is more efficient than the single channel chimney, achieving thermal efficiency values near 75%. This solar chimney configuration can be used with better results than the traditional design as an alternative for natural ventilation systems in residential buildings without a significant increase in the cost of the residence investment.

scholarly journals Natural balanced ventilation. Simulations part 2

2018 ◽  
Vol 49 ◽  
pp. 00026
Author(s):  
Tomasz Gaczoł
Keyword(s):  
Natural Ventilation ◽  
Residential Buildings ◽  
Air Flow ◽  
Ventilation System ◽  
Flow Analysis ◽  
Comfort Level ◽  
Test Results ◽  
Pressure System ◽  
Exhaust Duct ◽  
Flow Through

The paper is devoted to test results of air flow through natural ventilation supply-exhaust ducts in the rooms located on the upper floor of the building that were conducted in ANSYS Fluent software. Three types of solutions were selected for the tests: air inflow into the room through the air intake located at the basement level, air inflow through the window ventilator (although no longer used, this solution can be found in many existing residential buildings) and the natural ventilation system supported with the so-called “solar chimney” that is usually a glass superstructure, located on the roof of the building above the ventilation ducts. All simulations were conducted with an outdoor temperature of +3 degrees C. The indoor temperature is + 20 degrees C, considered to be the minimum thermal comfort level. The simulations concerned such issues as: pressure system inside the room and in the exhaust duct, distribution of air temperatures in the room, vector direction of air flow through supply and exhaust ducts and in the room. Tests conducted using a computer method of air flow analysis in ducts and in the analysed room indicate that the developed natural balanced ventilation system is a good solution, especially when building sealing is so common. In all cases presented, it meets the normative regulations and requirements for the ventilation air stream and the air exchange rate in the room. The paper (second part) describes test results concerning the room located on the upper floor of the building, i.e. with a long 9-meter long supply duct and a short 3-meter long exhaust duct.

URBAN FACADE GEOMETRY ON OUTDOOR COMFORT CONDITIONS: A REVIEW

2020 ◽  
Vol 4 (1) ◽  
pp. 45
Author(s):  
Elahe Mirabi ◽  
Nasrollahi Nazanin
Keyword(s):  
Thermal Comfort ◽  
Urban Areas ◽  
Natural Ventilation ◽  
Flow Behavior ◽  
Air Flow ◽  
Urban Geometry ◽  
Wide Range ◽  
Low Energy Buildings ◽  
Outdoor Comfort ◽  
Solar Access

<p>Designing urban facades is considered as a major factor influencing issues<br />such as natural ventilation of buildings and urban areas, radiations in the<br />urban canyon for designing low-energy buildings, cooling demand for<br />buildings in urban area, and thermal comfort in urban streets. However, so<br />far, most studies on urban topics have been focused on flat facades<br />without details of urban layouts. Hence, the effect of urban facades with<br />details such as the balcony and corbelling on thermal comfort conditions<br />and air flow behavior are discussed in this literature review. <strong>Aim</strong>: This<br />study was carried out to investigate the effective factors of urban facades,<br />including the effects of building configuration, geometry and urban<br />canyon’s orientation. <strong>Methodology and Results</strong>: According to the results,<br />the air flow behavior is affected by a wide range of factors such as wind<br />conditions, urban geometry and wind direction. Urban façade geometry<br />can change outdoor air flow pattern, thermal comfort and solar access.<br /><strong>Conclusion, significance and impact study</strong>: In particular, the geometry of<br />the facade, such as indentation and protrusion, has a significant effect on<br />the air flow and thermal behavior in urban facades and can enhance<br />outdoor comfort conditions. Also, Alternation in façade geometry can<br />affect pedestrians' comfort and buildings energy demands.</p>

scholarly journals A 2D Optimal Path Planning Algorithm for Autonomous Underwater Vehicle Driving in Unknown Underwater Canyons

2021 ◽  
Vol 9 (3) ◽  
pp. 252
Author(s):  
Yushan Sun ◽  
Xiaokun Luo ◽  
Xiangrui Ran ◽  
Guocheng Zhang
Keyword(s):  
Path Planning ◽  
Obstacle Avoidance ◽  
Autonomous Underwater Vehicles ◽  
Optimal Path ◽  
Small Scale ◽  
Target Point ◽  
Safe Driving ◽  
Policy Gradient ◽  
Planning Algorithm ◽  
Path Planning Algorithm

This research aims to solve the safe navigation problem of autonomous underwater vehicles (AUVs) in deep ocean, which is a complex and changeable environment with various mountains. When an AUV reaches the deep sea navigation, it encounters many underwater canyons, and the hard valley walls threaten its safety seriously. To solve the problem on the safe driving of AUV in underwater canyons and address the potential of AUV autonomous obstacle avoidance in uncertain environments, an improved AUV path planning algorithm based on the deep deterministic policy gradient (DDPG) algorithm is proposed in this work. This method refers to an end-to-end path planning algorithm that optimizes the strategy directly. It takes sensor information as input and driving speed and yaw angle as outputs. The path planning algorithm can reach the predetermined target point while avoiding large-scale static obstacles, such as valley walls in the simulated underwater canyon environment, as well as sudden small-scale dynamic obstacles, such as marine life and other vehicles. In addition, this research aims at the multi-objective structure of the obstacle avoidance of path planning, modularized reward function design, and combined artificial potential field method to set continuous rewards. This research also proposes a new algorithm called deep SumTree-deterministic policy gradient algorithm (SumTree-DDPG), which improves the random storage and extraction strategy of DDPG algorithm experience samples. According to the importance of the experience samples, the samples are classified and stored in combination with the SumTree structure, high-quality samples are extracted continuously, and SumTree-DDPG algorithm finally improves the speed of the convergence model. Finally, this research uses Python language to write an underwater canyon simulation environment and builds a deep reinforcement learning simulation platform on a high-performance computer to conduct simulation learning training for AUV. Data simulation verified that the proposed path planning method can guide the under-actuated underwater robot to navigate to the target without colliding with any obstacles. In comparison with the DDPG algorithm, the stability, training’s total reward, and robustness of the improved Sumtree-DDPG algorithm planner in this study are better.

scholarly journals Thermal Performance of Single-Story Air-Welled Terraced House in Malaysia: A Field Measurement Approach

2020 ◽  
Vol 13 (1) ◽  
pp. 201
Author(s):  
Pau Chung Leng ◽  
Gabriel Hoh Teck Ling ◽  
Mohd Hamdan Ahmad ◽  
Dilshan Remaz Ossen ◽  
Eeydzah Aminudin ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Air Temperature ◽  
Thermal Performance ◽  
Field Measurement ◽  
Natural Ventilation ◽  
Residential Buildings ◽  
Wet Bulb Globe Temperature ◽  
Natural Lighting ◽  
Ventilation Performance ◽  
Globe Temperature

The provision requirement of 10% openings of the total floor area stated in the Uniform Building By-Law 1984 Malaysia is essential for natural lighting and ventilation purposes. However, focusing on natural ventilation, the effectiveness of thermal performance in landed residential buildings has never been empirically measured and proven, as most of the research emphasized simulation modeling lacking sufficient empirical validation. Therefore, this paper drawing on field measurement investigates natural ventilation performance in terraced housing with an air-well system. The key concern as to what extent the current air-well system serving as a ventilator is effective to provide better thermal performance is to be addressed. By adopting an existing single-story air-welled terrace house, indoor environmental conditions and thermal performance were monitored and measured using HOBO U12 air temperature and humidity, the HOBO U12 anemometer, and the Delta Ohm HD32.3 Wet Bulb Globe Temperature meter for a six-month duration. The results show that the air temperature of the air well ranged from 27.48 °C to 30.92 °C, with a mean relative humidity of 72.67% to 79.25%. The mean air temperature for a test room (single-sided ventilation room) ranged from 28.04 °C to 30.92 °C, with a relative humidity of 70.16% to 76.00%. These empirical findings are of importance, offering novel policy insights and suggestions. Since the minimum provision of 10% openings has been revealed to be less effective to provide desirable thermal performance and comfort, mandatory compliance with and the necessity of the bylaw requirement should be revisited.

Improving Sustainability of Housing in Ghana through Energy Efficient Climate Control Strategies

2012 ◽  
Vol 608-609 ◽  
pp. 1698-1704
Author(s):  
Abdul Manan Dauda ◽  
Hui Gao
Keyword(s):  
Natural Ventilation ◽  
Energy Savings ◽  
Control Strategies ◽  
Internal Heat ◽  
Climate Control ◽  
Housing Design ◽  
Artificial Lighting ◽  
Testing Procedures ◽  
Mass Housing ◽  
Design Changes

This paper aims at explaining testing procedures used to evaluate the potential of natural ventilation and daylighting applications to passive design of housing in Ghana. The objectives of research were to reduce energy costs and increase the sustainability of housing. From the results of these experiments actual and potential designs are illustrated and discussed. Mass housing results in multi-storey buildings which require substantial artificial lighting and ventilation. Also, with the increasing usage of glass for windows and doors in Ghana, even the shaded depths of buildings require additional daylight usually resulting in more energy consumption. By supplementing the internal lighting levels with daylight, reducing the internal heat load by shading windows to direct radiation and the utilization of natural ventilation over air conditioning where possible, significant energy savings are could be achieved. The research proposes mass housing design changes such as: delivering daylight above the suspended ceiling into the depths of the building by horizontal light pipes and natural ventilation, utilizing stack effect and wind siphonage, etc.

scholarly journals Proposing Alternative Solutions to Enhance Natural Ventilation Rates in Residential Buildings in the Cfa Climate Zone of Rasht

2021 ◽  
Vol 13 (2) ◽  
pp. 679
Author(s):  
Roya Aeinehvand ◽  
Amiraslan Darvish ◽  
Abdollah Baghaei Daemei ◽  
Shima Barati ◽  
Asma Jamali ◽  
...  
Keyword(s):  
Natural Ventilation ◽  
Residential Buildings ◽  
Residential Building ◽  
Ventilation Rate ◽  
Humid Climate ◽  
The Sustainable Development ◽  
Passive Strategies ◽  
Development Goals ◽  
Ventilation Rates ◽  
Ventilation Systems

Today, renewable resources and the crucial role of passive strategies in energy efficiency in the building sector toward the sustainable development goals are more indispensable than ever. Natural ventilation has traditionally been considered as one of the most fundamental techniques to decrease energy usage by building dwellers and designers. The main purpose of the present study is to enhance the natural ventilation rates in an existing six-story residential building situated in the humid climate of Rasht during the summertime. On this basis, two types of ventilation systems, the Double-Skin Facade Twin Face System (DSF-TFS) and Single-Sided Wind Tower (SSWT), were simulated through DesignBuilder version 4.5. Then, two types of additional ventilation systems were proposed in order to accelerate the airflow, including four-sided as well as multi-opening wind towers. The wind foldable directions were at about 45 degrees (northwest to southeast). The simulation results show that SSWT could have a better performance than the aforementioned systems by about 38%. Therefore, the multi-opening system was able to enhance the ventilation rate by approximately 10% during the summertime.

Natural-Ventilation Flow in a 3-D Room Fitted With Solar Chimney

2012 ◽  
Author(s):  
B. P. Huynh
Keyword(s):  
Heat Flux ◽  
Flow Pattern ◽  
Natural Ventilation ◽  
Air Flow ◽  
Ventilation Rate ◽  
High Heat Flux ◽  
Solar Chimney ◽  
Solar Heat ◽  
Solar Heat Flux ◽  
Inlet Opening

Natural-ventilation flow induced in a real-sized rectangular-box room fitted with a solar chimney on its roof is investigated numerically, using a commercial CFD (Computational Fluid Dynamics) software package. The chimney in turn is in the form of a parallel channel with one plate being subjected to uniform solar heat flux. Ventilation rate and air-flow pattern through the room are considered in terms of the heat flux for two different locations of the room’s inlet opening. Chien’s turbulence model of low-Reynolds-number K-ε is used in a Reynolds-Averaged Navier-Stokes (RANS) formulation. It is found that ventilation flow rate increases quickly with solar heat flux when this flux is low, but more gradually at higher flux. At low heat flux, ventilation rate is not significantly affected by location of the inlet opening to the room. On the other hand, at high heat flux, ventilation rate varies substantially with the opening’s location. Location of the inlet opening to the room also affects strongly the air-flow pattern. In any case, ample ventilation rate is readily induced by the chimney.

scholarly journals Indoor Air Quality (IAQ): Accuracy of Natural Ventilation for Temperature, Air Flow Rate and Relative Humidity (RH) in School Building Classrooms

2018 ◽  
Vol 7 (3.9) ◽  
pp. 42
Author(s):  
Norsafiah Norazman ◽  
Adi Irfan Che Ani ◽  
Nor Haslina Ja’afar ◽  
Muhamad Azry Khoiry
Keyword(s):  
Air Quality ◽  
Relative Humidity ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Natural Ventilation ◽  
Air Flow ◽  
Weather Conditions ◽  
Potential Health ◽  
The Hours ◽  
Hot Weather

Indoor Air Quality (IAQ) is an essential matter in achieving students’ satisfaction for the learning process. Building’s orientation is a factor that may encourage sufficient natural ventilation for the classroom occupants. Inadequate ventilation is an issue for most existing classrooms. The purpose of this paper is to analyze the accuracy of natural ventilation in classrooms. Therefore, experimental on 20 classrooms has been conducted by using Multipurpose Meter at secondary school buildings in Malaysia. The findings indicated that the accuracy of natural ventilation testing was below the permissible limits throughout the hours monitored, thus this may cause potential health hazards to the students. Temperature and air flow rates were lower than 23 °C and 0.15 m/s respectively, it fulfilled the basic requirements as a standard learning environment. However, measurements taken showed the overall relative humidity (RH) in the classrooms can be categorized as acceptable with 40% to 70% range. On the basis of these findings, it is evident that naturally ventilated classrooms are important especially due to energy efficiency, whereas mechanical ventilation should only be installed as an alternative under extremely hot weather conditions.   

Sign in / Sign up

Export Citation Format

Share Document