scholarly journals Potential Applications of Native Cyanobacterium Isolate (Arthrospira platensis NIOF17/003) for Biodiesel Production and Utilization of Its Byproduct in Marine Rotifer (Brachionus plicatilis) Production

2021 ◽  
Vol 13 (4) ◽  
pp. 1769 ◽  
Author(s):  
Mohamed A. Zaki ◽  
Mohamed Ashour ◽  
Ahmed M. M. Heneash ◽  
Mohamed M. Mabrouk ◽  
Ahmed E. Alprol ◽  
...  
Keyword(s):  
Brachionus Plicatilis ◽  
Methyl Esters ◽  
Cetane Number ◽  
Biomass Productivity ◽  
Dry Weight ◽  
Arthrospira Platensis ◽  
International Standards ◽  
Biodiesel Production ◽  
Cold Filter Plugging Point ◽  
Rotifer Brachionus Plicatilis

To achieve strong, successful and commercial aqua-biotechnological microalgae applications, screening, isolation, molecular identification, and physiological characterizations are needed. In the current study, a native cyanobacteria strain Arthrospira platensis NIOF17/003 was isolated from the surface water of El-Khadra Lake, a saline-alkaline lake located in Wadi El-Natrun, Egypt. The cyanobacterium was phylogenetically identified by 16S rRNA molecular marker and deposited in the GenBank database (accession number MW396472). The late exponential phase of A. platensis NIOF17/003 was reached at the 8th day of growth using Zarrouk medium, with a recorded dry weight (DW) of 0.845 g L−1. The isolated strain showed 52% of protein, 14% of carbohydrate, biomass productivity of 143.83 mg L−1 day−1, 8.5% of lipid, and lipid productivity of 14.37 mg L−1 day−1. In general, the values of cetane number, iodine value, cold filter plugging point (52.9, 85.5 g I2/100 g oil, and −2.2 °C, respectively) of the isolated fatty acid methyl esters are in accordance with those suggested by international standards. Besides, applying algal-free lipid (FL) as biodiesel byproduct in the production of rotifer (Brachionus plicatilis) revealed that a 0.6 g L−1 FL significantly increased the rotifer population females carrying eggs, confirming that FL can be used efficiently for B. plicatilis production. The current study concluded that the new isolate A. platensis NIOF17/003 is a promising strain for double sustainable use in biodiesel production and aquaculture feed.

scholarly journals RAPE SEED OIL TETRAHYDROFURFURYLESTERS

2015 ◽  
Vol 1 ◽  
pp. 46
Author(s):  
K. Malins ◽  
V. Kampars ◽  
R. Kampare ◽  
T. Rusakova
Keyword(s):  
Rapeseed Oil ◽  
Fossil Fuels ◽  
Raw Materials ◽  
Methyl Esters ◽  
Cetane Number ◽  
Food Prices ◽  
Raw Material ◽  
Biodiesel Production ◽  
Cold Filter Plugging Point ◽  
Mineral Oils

The transesterification of vegetable oil using various kinds of alcohols is a simple and efficient renewable fuel synthesis technique. Products obtained by modifying natural triglycerides in transesterification reaction substitute fossil fuels and mineral oils. Currently the most significant is the biodiesel, a mixture of fatty acid methyl esters, which is obtained in a reaction with methanol, which in turn is obtained from fossil raw materials. In biodiesel production it would be more appropriate to use alcohols which can be obtained from renewable local raw materials. Ethanol rouses interest as a possible reagent, however, its production locally is based on the use of grain and therefore competes with food production so it would implicitly cause increase in food prices. Another raw material option is alcohols that can be obtained from furfurole. Furfurole is obtained in dehydration process from pentose sugars which can be extracted from crop straw, husk and other residues of agricultural production. From furfurole the tetrahydrofurfuryl alcohol (THFA), a raw material for biodiesel, can be produced. By transesterifying rapeseed oil with THFA it would be possible to obtain completely renewable biodiesel with properties very close to diesel [2-4]. With the purpose of developing the synthesis of such fuel, in this work a three-stage synthesis of rapeseed oil tetrahydrofurfurylesters (ROTHFE) in sulphuric acid presence has been performed, achieving product with purity over 98%. The most important qualitative factors of ROTHFE have been determined - cold filter plugging point, cetane number, water content, Iodine value, phosphorus content, density, viscosity and oxidative stability.

scholarly journals Assessing biodiesel quality parameters for wastewater grown Chlorella sp.

2017 ◽  
Vol 76 (3) ◽  
pp. 719-727 ◽  
Author(s):  
Samadhan Yuvraj Bagul ◽  
Randhir K. Bharti ◽  
Dolly Wattal Dhar
Keyword(s):  
Tap Water ◽  
Cetane Number ◽  
Acid Methyl Ester ◽  
Dry Weight ◽  
Quality Parameters ◽  
Biodiesel Production ◽  
Physical Parameters ◽  
Fuel Quality ◽  
Cold Filter Plugging Point ◽  
Chlorella Sp

Microalgae are reported as the efficient source of renewable biodiesel which should be able to meet the global demand of transport fuels. Present study is focused on assessment of wastewater grown indigenous microalga Chlorella sp. for fuel quality parameters. This was successfully grown in secondary treated waste water diluted with tap water (25% dilution) in glass house. The microalga showed a dry weight of 0.849 g L−1 with lipid content of 27.1% on dry weight basis on 21st day of incubation. After transesterification, the yield of fatty acid methyl ester was 80.64% with major fatty acids as palmitic, linoleic, oleic and linolenic. The physical parameters predicted from empirical equations in the biodiesel showed cetane number as 56.5, iodine value of 75.5 g I2 100 g−1, high heating value 40.1 MJ kg−1, flash point 135 °C, kinematic viscosity 4.05 mm2 s−1 with density of 0.86 g cm3 and cold filter plugging point as 0.7 °C. Fourier transform infra-red (FTIR), 1H, 13C NMR spectrum confirmed the chemical nature of biodiesel. The results indicated that the quality of biodiesel was almost as per the criterion of ASTM standards; hence, wastewater grown Chlorella sp. can be used as a promising strain for biodiesel production.

scholarly journals Effect of Nitrogen Concentration on the Alkalophilic Microalga Nitzschia sp. NW129-a Promising Feedstock for the Integrated Production of Lipids and Fucoxanthin in Biorefinery

2022 ◽  
Vol 8 ◽  
Author(s):  
Zihao Cao ◽  
Xiaotong Shen ◽  
Xujing Wang ◽  
Baohua Zhu ◽  
Kehou Pan ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Large Scale ◽  
Methyl Esters ◽  
Nitrogen Concentration ◽  
Cetane Number ◽  
Value Added ◽  
Dry Weight ◽  
Biofuel Production ◽  
Dependent Manner ◽  
Cold Filter Plugging Point

Microalgae are considered promising resources for producing a variety of high-value-added products, especially for lipids and pigments. Alkalophilic microalgae have more advantages than other microalgae when cultured outdoors on a large scale. The present study investigated the comprehensive effects of different nitrogen concentrations on fucoxanthin (Fx), lipids accumulation and the fatty acid profile of the alkaliphilic microalgae Nitzschia sp. NW129 to evaluate the potential for simultaneous production of Fx and biofuels. Fx and Lipids amassed in a coordinated growth-dependent manner in response to various concentrations, reaching 18.18 mg g–1 and 40.67% dry weight (DW), respectively. The biomass of Nitzschia sp. NW129 was 0.58 ± 0.02 g L–1 in the medium at the concentration of 117.65 mM. The highest productivities of Fx (1.44 mg L–1 d–1) and lipid (19.95 ± 1.29 mg L–1 d–1) were obtained concurrently at this concentration. Furthermore, the fatty acid methyl esters revealed excellent biofuel properties with an appropriate value of the degree unsaturation (49.97), cetane number (62.72), and cold filter plugging point (2.37), which met the European standards for biofuel production (EN14214). These results provided a reliable strategy for further industrialization and comprehensive production of biofuel and Fx by using the alkaliphilic microalgal Nitzschia sp. NW129.

scholarly journals Potential Applications of Arthrospira platensis Lipid-Free Biomass in Bioremediation of Organic Dye from Industrial Textile Effluents and Its Influence on Marine Rotifer (Brachionus plicatilis)

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4446
Author(s):  
Ahmed E. Alprol ◽  
Ahmed M. M. Heneash ◽  
Mohamed Ashour ◽  
Khamael M. Abualnaja ◽  
Dalal Alhashmialameer ◽  
...  
Keyword(s):  
Contact Time ◽  
Brachionus Plicatilis ◽  
Kinetic Studies ◽  
Textile Wastewater ◽  
Arthrospira Platensis ◽  
Biodiesel Production ◽  
Isotherm Models ◽  
Textile Effluents ◽  
Rotifer Brachionus Plicatilis ◽  
Marine Rotifer

Arthrospira platensis is one of the most important cultured microalgal species in the world. Arthrospira complete dry biomass (ACDB) has been reported as an interesting feedstock for many industries, including biodiesel production. The A. platensis by-product of biodiesel production (lipid-free biomass; LFB) is a source of proteins, functional molecules, and carbohydrates, and can also be reused in several applications. The current study investigated the efficiency of ACDB and LFB in bioremediation of dye (Ismate violet 2R, IV2R) from textile effluents. In addition, the potential of ACDB and LFB loaded by IV2R as a feed for Rotifer, Brachionus plicatilis, was examined. The surface of the adsorbents was characterized by SEM, FTIR, and Raman analysis to understand the adsorption mechanism. The batch sorption method was examined as a function of adsorbent dose (0.02–0.01 g L−1), solution initial concentration (10–100 mg L−1), pH (2–10), and contact time (15–180 min). The kinetic studies and adsorption isotherm models (Freundlich, Langmuir, Tempkin, and Halsey) were used to describe the interaction between dye and adsorbents. The results concluded that the adsorption process increased with increasing ACDB and LFB dose, contact time (120 min), initial IV2R concentration (10 mg L−1), and acidity pH (2 and 6, respectively). For the elimination of industrial textile wastewater, the ACDB and LFB sorbents have good elimination ability of a dye solution by 75.7% and 61.11%, respectively. The kinetic interaction between dye and adsorbents fitted well to Langmuir, Freundlish, and Halsey models for LFB, and Langmuir for ACDB at optimum conditions with R2 > 0.9. In addition, based on the bioassay study, the ACDB and LFB loaded by IV2R up to 0.02 g L−1 may be used as feed for the marine Rotifer B. plicatilis.

Direct Methanolysis of Oleaginous Yeast Biomass (Pseudozyma parantarctica) to Microbial Biodiesel

2017 ◽  
Vol 753 ◽  
pp. 259-263
Author(s):  
Atsdawut Areesirisuk ◽  
Chiu Hsia Chiu ◽  
Tsair Bor Yen ◽  
Jia Hsin Guo
Keyword(s):  
Oleaginous Yeast ◽  
Methyl Esters ◽  
Lipid Extraction ◽  
Cetane Number ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Intracellular Lipids ◽  
Yeast Biomass ◽  
Cellular Lipids ◽  
Astm D6751

In this study, intracellular lipids of a novel oleaginous biomass of P. parantarctica were converted to biodiesel directly using simple acid catalyst methanolysis. The optimum condition of this method was investigated. Under optimum conditions (0.1 M H2SO4, 10 h reaction time, 65°C reaction temperature, and 1:20 (w/v) biomass-to-methanol ratio), the yield of crude biodiesel was 93.18 ± 2.09% based on total cellular lipids. The composition of crude biodiesel was C16:C18 fatty acid methyl esters (FAMEs) for 91.91%. Especially, the C18:1 methyl ester was the main FAME (47.10%). In addition, the result showed that this technique could produce the microbial biodiesel from biomass containing high free fatty acids (FFAs) without soap formation. The predicted cetane number and kinematic viscosity of biodiesel were characterized according to ASTM D6751 and EN 14214 standards. Our results indicated that this process produces a good quality biodiesel. Moreover, it can decrease the manufacturing costs of microbial biodiesel production from oleaginous yeast biomass without cell disruption and lipid extraction.

scholarly journals Biodiesel Production Using Supercritical Methanol with Carbon Dioxide and Acetic Acid

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Chao-Yi Wei ◽  
Tzou-Chi Huang ◽  
Ho-Hsien Chen
Keyword(s):  
Carbon Dioxide ◽  
Acetic Acid ◽  
Reaction Temperature ◽  
Methyl Esters ◽  
Reaction Medium ◽  
International Standards ◽  
Biodiesel Production ◽  
Supercritical Methanol ◽  
Optimal Reaction Temperature ◽  
Hydrolysis Of

Transesterification of oils and lipids in supercritical methanol is commonly carried out in the absence of a catalyst. In this work, supercritical methanol, carbon dioxide, and acetic acid were used to produce biodiesel from soybean oil. Supercritical carbon dioxide was added to reduce the reaction temperature and increase the fats dissolved in the reaction medium. Acetic acid was added to reduce the glycerol byproduct and increase the hydrolysis of fatty acids. The Taguchi method was used to identify optimal conditions in the biodiesel production process. With an optimal reaction temperature of 280°C, a methanol-to-oil ratio of 60, and an acetic acid-to-oil ratio of 3, a 97.83% yield of fatty acid methyl esters (FAMEs) was observed after 90 min at a reaction pressure of 20 MPa. While the common approach to biodiesel production results in a glycerol byproduct of about 10% of the yield, the practices reported in this research can reduce the glycerol byproduct by 30.2% and thereby meet international standards requiring a FAME content of >96%.

scholarly journals Optimizing Nannochloropsis Growing Conditions for Biodiesel Production Through Analysis of Lipid Content

2021 ◽  
Author(s):  
Steven Liu ◽  
Devon Renock
Keyword(s):  
Aluminum Sulfate ◽  
Methyl Esters ◽  
Internal Standard ◽  
Dry Weight ◽  
Biodiesel Production ◽  
Vacuum Filtration ◽  
Flame Ionization ◽  
Acid Catalyzed ◽  
Growing Conditions

<div><div><div><div><p>The algae are grown in two groups of three 2.5 L glass jugs spanning three concentration levels of nitrates and phosphates. A growing “f/2” medium is kept constant across trials. The algae are harvested using a flocculating solution of aluminum sulfate and vacuum filtration. The oven dry weight is obtained. Acid catalyzed in situ transesterification is used to achieve maximum conversion of fatty acids into fatty acid methyl esters (FAME), which are then analyzed using gas chromatography (GC) equipped with a flame ionization detector. Supelco 37-component FAME standards were used for identification and quantification of the FAMEs. Methyl pentadecanoate was used as an internal standard for quantification. HPLC-grade hexane used as solvent in GC analysis.</p></div></div></div></div>

scholarly journals Coupling of Nutrient Removal and Biodiesel Production By Asterarcys quadricellulare Microalga Grown in Municipal Wastewater

2021 ◽  
Author(s):  
Hanaa Morsi ◽  
Hamed Eladel ◽  
Ayah Maher
Keyword(s):  
Municipal Wastewater ◽  
Basal Medium ◽  
Biomass Productivity ◽  
International Standards ◽  
Lipid Productivity ◽  
Biodiesel Production ◽  
Fatty Acids Profile ◽  
High Lipid ◽  
Biodiesel Feedstock ◽  
Profile Estimation

Abstract The present study focused on the feasibility of using municipal wastewater (WW) as culture medium for cultivation of microalgae. The study aimed to assess the efficiency of microalgae in nutrients removing capacity from wastewater and its biomass and lipid productivity for using as biodiesel feedstock. Based on that, the green microalga Asterarcys quadricellulare was isolated and grown for 24 days in Bold’s Basal Medium as a control and at different concentration of secondary treated municipal wastewater (WW) diluted with distilled water (25%, 50%, 75% and 100%WW). Results of 75%WW treatment recorded 96.6%, 98.4%, and 89.9% removal efficiency for, nitrate, ammonia and total phosphorus, respectively. Also, it revealed high biomass productivity and biomass content, where it recorded 69.0 mgL-1 day-1, and 1.44 g/L, respectively. Likewise, high lipid productivity 17.2 mg L−1 day−1 and 360.6 mg/L lipid content. Consequently, Asterarcys quadricellulare fatty acids profile estimation revealed an increase in Oleic, Palmitic and Linoleic acids levels. Most properties of biodiesel derived from the studied microalga meet with values established by the ASTM D6751 and EN 14214 biodiesel standards. According to this analysis, A. quadricellulare microalga could be used for wastewater bioremediation and biomass production with a suitable content of lipids proper as biodiesel feedstock. The predictive biodiesel properties pointed that it has a good quality compared with international standards.

Studies on optimization of transesterification of certain oils to produce biodiesel

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Edible Oils ◽  
Combustion Engine ◽  
Methyl Esters ◽  
Cetane Number ◽  
Cost Effective ◽  
Edible Oil ◽  
Biodiesel Production ◽  
Environment Friendly ◽  
Promising Alternative ◽  
Qualitative And Quantitative

The oil seed production in the country presently meets only 60-70% of its total edible oil requirements and the rest is met through imports. India also has a potential of collecting 5 million tons of tree-borne oilseeds (TBO) of which only one million tons are being collected presently. The consumption of edible oil is very high in the country and still the indigenous production does not meet the demand and considerable amount of edible oil is imported and it is therefore, not advisable to divert these sources for biodiesel production. On the other hand, the non-edible oil resources can be a solution for biodiesel production. Non- edible oil from the plant seeds is the most promising alternative fuel for internal combustion engine because it is renewable, environment friendly, non-toxic, biodegradable has no sulphur and aromatics, has favourable combustion value and higher cetane number. Extensive work has been done on the transesterification of non-edible oils; however, no significant work has been done on the optimization of transesterification process, oil characterization and fuel analysis of most of the non-edible seed oils. In the present work, optimization of transesterification process and analysis of biodiesel from non-edible oil was done; based on optimized protocol for biodiesel production from non-edible oilseeds of Neem and Pongamia converted into fatty acid methyl esters (FAME) through base catalyzed transesterification using an optimum ratio of 1:6 (Oil : Methanol) at 60oC. Biodiesel from these sources was analyzed for qualitative and quantitative characterization by using, GC-MS and FT-IR techniques. Based on qualitative and quantitative analysis of biodiesel, it is concluded that the biodiesel from these species can be feasible, cost effective and environment friendly.

Biodiesel Production from Pongamia Pinnata and its Characterization using GC-MS, NMR and FT-IR Spectral Studies

2018 ◽  
Vol 10 (6) ◽  
Author(s):  
J. Fernandez ◽  
V. Hariram ◽  
S. Seralathan ◽  
S.A. Harikrishnan ◽  
T. Micha Premkumar
Keyword(s):  
Fatty Acids ◽  
Methyl Esters ◽  
Cetane Number ◽  
Calorific Value ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Major Constituent ◽  
Spectral Studies ◽  
Biodiesel Synthesis ◽  
Ft Ir

Biodiesel synthesis from the pongamia oil seed and its characterization is elaborated in this paper. A double stage transesterification i.e. acid catalysed transesterification and base catalysed esterification are adopted to reduce the free fatty acids content and conversion of triglycerides into methyl esters. In this process, H2SO4, NaOH and methanol are used at the methanol/oil molar ratio of 7:1. By this process, 95% of pongamia biodiesel is obtained. The physiochemical properties like calorific value, Cetane number, density, kinematic viscosity, flash point, fire point etc. are analysed and it is found to be within the ASTM standards. GC-MS analysis indicated the existence of 14 prominent fatty acids with oleic acid as the major constituent. 13C and 1H NMR results supported the GC-MS data and it also confirmed the conversion efficiency of converting the vegetable oil into PBD as 87.23%. The shifting and appearance of major peaks in the FT-IR spectrum confirmed the formation of FAMEs from the triglycerides.

Sign in / Sign up

Export Citation Format

Share Document