scholarly journals The Effects of Landscape Elements on the Breeding Sites of Bloodsucking Midge

2021 ◽  
Vol 13 (5) ◽  
pp. 2863
Author(s):  
Kaowen Grace Chang ◽  
Hungju Chien
Keyword(s):  
Ground Surface ◽  
Preventive Strategies ◽  
Careful Selection ◽  
Public Concern ◽  
Breeding Sites ◽  
Algae Growth ◽  
Potential Habitats ◽  
Landscape Factors ◽  
The Relationship ◽  
Selection Of

Forcipomyia taiwana, a bloodsucking midge that is one of the most irritating biting pests in Taiwan, has raised widespread public concern. However, we have little information about the extent to which landscape factors affect their potential habitats. As a result, landscape professionals do not have enough information to implement preventive strategies to control midges. The purpose of this study is to investigate the relationship between landscaping and algae growth for larval breeding sites of Forcipomyia taiwana. The intent is to determine the environmental strategies that make the planned landscape unsuitable for midges to breed. GIS based on data collected from 16 constructed landscape sites (317,187 m2 in total) was utilized to spatially examine the relationship between the occurrence of the algae for midge breeding sites and the ground surface types and planting characteristics in each landscape. The results revealed that the potential midge habitats can be controlled through careful selection of the ground surface, the improvement of the site drainage, and choosing plants with the appropriate characteristics. Apart from choosing the appropriate type of paving surface, the integrity of the paving installation and the coverage of the ecological surface also influence prevention efficacy.

The relationship between settling velocity grading and the characteristics of the contributing catchment

1996 ◽  
Vol 33 (9) ◽  
pp. 135-142 ◽  
Author(s):  
J. Naomi Tyack ◽  
Peter D. Hedges ◽  
Robert P. M. Smisson
Keyword(s):  
Wastewater Treatment ◽  
Settling Velocity ◽  
Careful Selection ◽  
Predictive Tool ◽  
Regression Techniques ◽  
Research Relationships ◽  
Water Companies ◽  
The Relationship ◽  
Dry Weather Flow ◽  
Selection Of

A method for measuring the settling velocity gradings of both storm and dry weather flow (DWF) sewage was investigated. This method was then used experimentally to determine whether a relationship exists between the settling velocity grading of a sewage as it enters a treatment works and the characteristics of the contributing catchment. The problems associated with the collection of data on the characteristics of the contributing catchments are discussed. These include the availability of up to date information within the water companies and the time consuming nature of collecting full sets of information for a particular wastewater treatment works. An S-shaped curve was fitted to all the settling velocity gradings produced during the research. Relationships relating the curve constants to the catchment characteristics were derived using multiple regression techniques. The methodology was proved, but the model was not sensitive enough to be used successfully as a predictive tool without further analysis involving either more sites and/or a more careful selection of the test sites.

scholarly journals Choosing a Thirteenth-Century Motet Tenor: From the Magnus liber organi to Adam de la Halle

2019 ◽  
Vol 72 (2) ◽  
pp. 431-492 ◽  
Author(s):  
Catherine A. Bradley
Keyword(s):  
Thirteenth Century ◽  
Musical Ability ◽  
Careful Selection ◽  
Musical Practice ◽  
Adam De La Halle ◽  
The Relationship ◽  
Selection Of ◽  
Written Sources

This article explores trends and motivations in the selection of plainchant and vernacular song quotations as the foundations of thirteenth-century motets. I argue that particular tenor melodies that received only cursory treatment in the liturgical polyphony of the Magnus liber organi were adopted in motets on account of their brevity and simplicity, characteristics that enabled their combination with upper-voice song forms and refrain quotations. Demonstrating a preference for short and simple tenors within the earliest layers of the motet repertoire, I trace the polyphonic heritage of the tenor omnes, whose simple melody enabled its combination with another more obscure plainchant quotation, aptatur, in a unique double tenor motet. I propose that motet creators—while sensitive to the semantic connotations of tenor texts—exploited the musical ability of tenor quotations to be combined with or stand in for other musical quotations. Newly identifying a plainchant tenor source in a motet by Adam de la Halle, I show that Adam's polyphonic motet quotations of his own three-voice polyphonic rondeaux were achieved by the careful selection of motet tenors to replicate the freely conceived lowest voices of these preexisting rondeaux. The article further reveals profound modal and melodic similarities between the quotations chosen as thirteenth-century motet tenors and the newly composed lowest voices of polyphonic rondeaux and English pes motets. It offers new perspectives on the relationship between the “elite” genre of the motet and types of polyphony that are less well attested in written sources, often considered to inhabit a more “popular” realm of musical practice.

Sentence Intelligibility as a Function of Key Word Selection

1974 ◽  
Vol 17 (4) ◽  
pp. 631-637 ◽  
Author(s):  
Joseph R. Duffy ◽  
Thomas G. Giolas
Keyword(s):  
Key Words ◽  
Careful Selection ◽  
Key Word ◽  
Low Pass ◽  
Sentence Intelligibility ◽  
Word Predictability ◽  
Word Selection ◽  
The Relationship ◽  
Selection Of

The purpose of this study was to investigate the relationship between word predictability and sentence intelligibility. This relationship was examined by comparing intelligibility scores obtained with frequency-filtered sentences (CID Sentence Lists B and D and Revised List C) which were scored using key words empirically determined to be representative of three different degrees of predictability. We hypothesized that the scores obtained would be a function of the predictability status of the key words used in scoring. Results indicated significant differences between the three scoring procedures for each sentence list under two filtering conditions (420-Hz and 360-Hz low pass) and these differences were in the hypothesized direction. The results suggest that use of “easy-to-predict” words for scoring purposes will increase sentence intelligibility scores, while use of “difficult-to-predict” words will depress scores. We concluded that word predictability is a factor influencing sentence intelligibility and that careful selection of key words, based on their predictability status, is a method of controlling or influencing the intelligibility of sentences.

S-cone psychophysics

2014 ◽  
Vol 31 (2) ◽  
pp. 211-225 ◽  
Author(s):  
HANNAH E. SMITHSON
Keyword(s):  
Superior Colliculus ◽  
Stimulus Control ◽  
Experimental Psychology ◽  
Physiological Data ◽  
Careful Selection ◽  
Stimulus Parameters ◽  
Two Factors ◽  
Cone System ◽  
The Relationship ◽  
Selection Of

AbstractWe review the features of the S-cone system that appeal to the psychophysicist and summarize the celebrated characteristics of S-cone mediated vision. Two factors are emphasized: First, the fine stimulus control that is required to isolate putative visual mechanisms and second, the relationship between physiological data and psychophysical approaches. We review convergent findings from physiology and psychophysics with respect to asymmetries in the retinal wiring of S-ON and S-OFF visual pathways, and the associated treatment of increments and decrements in the S-cone system. Beyond the retina, we consider the lack of S-cone projections to superior colliculus and the use of S-cone stimuli in experimental psychology, for example to address questions about the mechanisms of visually driven attention. Careful selection of stimulus parameters enables psychophysicists to produce entirely reversible, temporary, “lesions,” and to assess behavior in the absence of specific neural subsystems.

IMPROVEMENT OF SPRING DURUM WHEAT SELECTION METHODOLOGIES UNDER CLIMATE CHANGE CONDITIONS

1970 ◽  
pp. 33-36
Author(s):  
А. I. Grabovets ◽  
V. P. Kadushkina ◽  
S. А. Kovalenko
Keyword(s):  
Grain Yield ◽  
Durum Wheat ◽  
Correlation Coefficient ◽  
Harvest Index ◽  
Unit Area ◽  
Correlation Coefficients ◽  
Chemical Mutagenesis ◽  
Main Method ◽  
The Relationship ◽  
Selection Of

With the growing aridity of the climate on the Don, it became necessary to improve the methodology for conducting the  breeding of spring durum wheat. The main method of obtaining the source material remains intraspecific step hybridization. Crossings were performed between genetically distant forms, differing in origin and required traits and properties. The use of chemical mutagenesis was a productive way to change the heredity of genotypes in terms of drought tolerance. When breeding for productivity, both in dry years of research and in favorable years, the most objective markers were identified — the size of the aerial mass, the mass of grain per plant, spike, and harvest index. The magnitude of the correlation coefficients between the yield per unit area and the elements of its structure is established. It was most closely associated with them in dry years, while in wet years it decreased. Power the correlation of the characteristics of the pair - the grain yield per square meter - the aboveground biomass averaged r = 0.73, and in dry years it was higher (0.91) than in favorable ones (0.61 - 0.70) , between the harvest and the harvest index - r = 0.81 (on average). In dry years, the correlation coefficient increased to 0.92. Research data confirms the greatest importance of the mass of grain from one ear and the plant in the formation of grain yield per unit area in both dry and wet years. In dry years, the correlation coefficient between yield and grain mass per plant was on average r = 0.80; in favorable years, r = 0.69. The relationship between yield and grain mass from the ear was greater — r = 0.84 and r = 0.82, respectively. Consequently, the breeding significance of the aboveground mass and the productivity of the ear, as a criterion for the selection of the crop, especially increases in the dry years. They were basic in the selection.

Analisa Pemilihan Moda Transportasi Umum Rute Tanjung Karang – Bandara Radin Inten II Dengan Stated Preference dan Uji Crame’s V

2018 ◽  
Vol 2 (2) ◽  
pp. 137
Author(s):  
Muhammad Abi Berkah Nadi
Keyword(s):  
Regression Analysis ◽  
Utility Function ◽  
Stated Preference ◽  
Technical Analysis ◽  
Chi Square ◽  
Time Headway ◽  
Independent Variable ◽  
The Relationship ◽  
Selection Of

Radin Inten II Airport is a national flight in Lampung Province. In this study using the technical analysis stated preference which is the approach by conveying the choice statement in the form of hypotheses to be assessed by the respondent. By using these techniques the researcher can fully control the hypothesized factors. To determine utility function for model forecasting in fulfilling request of traveler is used regression analysis with SPSS program. The analysis results obtained that the passengers of the dominant airport in the selection of modes of cost attributes than on other attributes. From the result of regression analysis, the influence of independent variable to the highest dependent variable is when the five attributes are used together with the R square value of 8.8%. The relationship between cost, time, headway, time acces and service with the selection of modes, the provision that states whether or not there is a decision. The significance of α = 0.05 with chi-square. And the result of Crame's V test average of 0.298 is around the middle, then the relationship is moderate enough.

A Biomarker Combining Imaging and Neuropsychological Assessment for Tracking Early Alzheimer's Disease in Clinical Trials

2018 ◽  
Vol 15 (5) ◽  
pp. 429-442 ◽  
Author(s):  
Nishant Verma ◽  
S. Natasha Beretvas ◽  
Belen Pascual ◽  
Joseph C. Masdeu ◽  
Mia K. Markey ◽  
...  
Keyword(s):  
Alzheimer’S Disease ◽  
Alzheimer's Disease ◽  
Clinical Trials ◽  
Cognitive Impairment ◽  
Latent Variable ◽  
Brain Regions ◽  
Disease Assessment ◽  
Latent Variable Analysis ◽  
The Relationship ◽  
Selection Of

Background: Combining optimized cognitive (Alzheimer's Disease Assessment Scale- Cognitive subscale, ADAS-Cog) and atrophy markers of Alzheimer's disease for tracking progression in clinical trials may provide greater sensitivity than currently used methods, which have yielded negative results in multiple recent trials. Furthermore, it is critical to clarify the relationship among the subcomponents yielded by cognitive and imaging testing, to address the symptomatic and anatomical variability of Alzheimer's disease. Method: Using latent variable analysis, we thoroughly investigated the relationship between cognitive impairment, as assessed on the ADAS-Cog, and cerebral atrophy. A biomarker was developed for Alzheimer's clinical trials that combines cognitive and atrophy markers. Results: Atrophy within specific brain regions was found to be closely related with impairment in cognitive domains of memory, language, and praxis. The proposed biomarker showed significantly better sensitivity in tracking progression of cognitive impairment than the ADAS-Cog in simulated trials and a real world problem. The biomarker also improved the selection of MCI patients (78.8±4.9% specificity at 80% sensitivity) that will evolve to Alzheimer's disease for clinical trials. Conclusion: The proposed biomarker provides a boost to the efficacy of clinical trials focused in the mild cognitive impairment (MCI) stage by significantly improving the sensitivity to detect treatment effects and improving the selection of MCI patients that will evolve to Alzheimer’s disease.

Excessive Belching: a Separate Syndrome or Another Symptom of Functional Dyspepsia?

2020 ◽  
Vol 30 (3) ◽  
pp. 55-60 ◽  
Author(s):  
A. A. Sheptulin ◽  
O. A. Storonova
Keyword(s):  
Functional Dyspepsia ◽  
Functional Gastrointestinal Disorders ◽  
High Resolution Manometry ◽  
Published Evidence ◽  
Key Points ◽  
Dyspeptic Symptoms ◽  
The Relationship ◽  
Rome Iv ◽  
Selection Of ◽  
Optimal Treatment Strategy

Aim of review. Interpretation of published evidence on the relationship between the excessive belching syndrome and functional dyspepsia (FD) and their management in patient care.Key points. According to the Rome IV criteria of functional gastrointestinal disorders (FGID), excessive belching in the absence of other dyspeptic symptoms is to be considered a manifestation of the excessive belching syndrome, which can be of gastric or supragastric nature. Combination of high-resolution manometry and impedancemetry allows an accurate diagnosis of belching and selection of optimal treatment strategy. Belching complicated by other symptoms of dyspepsia is to be considered yet another FD symptom according to the Rome IV criteria of FGID. Prokinetics are recommended to relieve belching in such cases.Conclusion. Understanding the relationship between the excessive belching syndrome and FD requires further research.

Afterword

2020 ◽  
pp. 680-683
Author(s):  
Janice L. Waldron ◽  
Stephanie Horsley ◽  
Kari K. Veblen
Keyword(s):  
Social Media ◽  
Media Use ◽  
Careful Selection ◽  
Social Media Use ◽  
Pedagogical Tools ◽  
The Future ◽  
User Data ◽  
Selection Of ◽  
Data Surface

We all feel the implications of the force of social media—for good and for ill—in our lives and in our professional world. At the time of this writing, Facebook continues with its struggle to “clean up its act” as more revelations surrounding breaches of trust and hacked user data surface in the news and various countries attempt to hold Facebook to account. Despite this, social media use continues to grow exponentially, and the potential for responsible, ethical, and transparent social media to transform the ways in which we interact with and learn from each other increase with it. As we wait to see what the future holds for social media in society, we are reminded once again that it is the careful selection of pedagogical tools such as social media, as well the guided awareness of the challenges and benefits of those tools, that remains constant, even as tools may change, disappear, or fall out of fashion.

scholarly journals Modeling the Temperature Field in the Ground with an Installed Slinky-Coil Heat Exchanger

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4010
Author(s):  
Monika Gwadera ◽  
Krzysztof Kupiec
Keyword(s):  
Temperature Field ◽  
Heat Exchanger ◽  
Surface Temperature ◽  
Ground Surface ◽  
Heat Sources ◽  
Ground Surface Temperature ◽  
Coil Heat Exchanger ◽  
The Relationship ◽  
Temperature Responses ◽  
Coil Heat

In order to find the temperature field in the ground with a heat exchanger, it is necessary to determine temperature responses of the ground caused by heat sources and the influence of the environment. To determine the latter, a new model of heat transfer in the ground under natural conditions was developed. The heat flux of the evaporation of moisture from the ground was described by the relationship taking into account the annual amount of rainfall. The analytical solution for the equations of this model is presented. Under the conditions for which the calculations were performed, the following data were obtained: the average ground surface temperature Tsm = 10.67 °C, the ground surface temperature amplitude As = 13.88 K, and the phase angle Ps = 0.202 rad. This method makes it possible to easily determine the undisturbed ground temperature at any depth and at any time. This solution was used to find the temperature field in the ground with an installed slinky-coil heat exchanger that consisted of 63 coils. The results of calculations according to the presented model were compared with the results of measurements from the literature. The 3D model for the ground with an installed heat exchanger enables the analysis of the influence of miscellaneous parameters of the process of extracting or supplying heat from/to the ground on its temperature field.

Sign in / Sign up

Export Citation Format

Share Document