scholarly journals Feasibility Evaluation of Replacing River Sand with Copper Tailings

2021 ◽  
Vol 13 (14) ◽  
pp. 7575
Author(s):  
Liyun Cui ◽  
Liang Wang ◽  
Ying Xu ◽  
Xing Lou ◽  
Hao Wang
Keyword(s):  
Compressive Strength ◽  
Sulfate Attack ◽  
Partial Replacement ◽  
Replacement Level ◽  
River Sand ◽  
Natural Sand ◽  
Copper Tailings ◽  
Fine Aggregates ◽  
Dry Shrinkage ◽  
Effect Of Copper

This study aims to realize the resource regeneration application of copper tailing (as fine aggregates for partial replacement of natural fine aggregates), which avoid environmental pollution due to many landfills of copper tailings. The compressive strength and durability (dry shrinkage and sulfate attack) tests were carried out to evaluate the effect of copper tailings replacement on the performance of mortar. The results show that the mortar with copper tailings has higher compressive strength than the one with natural sand. More than 14% improvement in compressive strength can be achieved by adding copper tailings with no more than 40% replacement level. The dry shrinkage of mortar was increased with the copper tailings due to the increase of micro pores in mortar by using copper tailings. Compared with the mortar with natural sand, the dry shrinkage can be reduced by adding copper tailings with no more than 20% replacement level. The sulfate attack resistance is improved by using copper tailings, when the replacement rate is more than 20%. In fact, the micro-aggregate filler effect of copper tailings effectively refines the pore structure and forms more stable, uniform and fine interface micro pores, which is of vital significance for mortar to resist external forces and sulfate ion erosion. However, copper tailings, as a porous material, have water release characteristics in cement mortar. This characteristic is not conducive to the filler effect, which decreases the filling rate in later hydration, leading to higher porosity of copper tailings mortar. More importantly, mortar can solidify heavy metals in copper tailings, which prevents loss of heavy metal such as Cu, Zn, Sr, Zr, As, Ga due to environmental problems.

scholarly journals Effects of Partial Replacement of Fine Aggregate with Quarry Dust on Concrete Properties

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
S.O Ajamu ◽  
I.A Raheem ◽  
S.B Attah ◽  
J.O Onicha
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Replacement Level ◽  
River Sand ◽  
Split Tensile Strength ◽  
Stone Dust ◽  
Concrete Production ◽  
Quarry Dust

Natural river sand is one of the important constituent materials in concrete production while stone dust is a material obtained from crusher plants which is also sometimes being used either partially or fully in replacement of natural river sand in concrete production. Use of stone dust in concrete not only improves the quality of concrete but also conserve the natural river sand. However, due its scarcity and environmental degradation caused resulting from excessive mining of Natural river sand, there is need to investigate an alternative material of the same quality which can replace river sand in concrete production. In the present study, experiments were carried out to study the gradation of aggregates, workability, compressive strength and split tensile strength of concrete made using quarry dust as replacement of fine aggregate at 0, 25, 50, 75, and 100%. Grade M15 of concrete was produced with ordinary Portland cement (OPC) for referral concrete while M25 of concrete was prepared for compressive strength and split tensile strength concrete. Workability and Compressive strength were determined at different replacement level of fine aggregate and optimum replacement level was determined based on compressive strength. Results showed that by replacing 50% of fine aggregate with quarry dust, concrete of maximum compressive strength can be produced as compared to all other replacement levels. The effect of quarry dust on compressive strength and split tensile strength was investigated and from the overall result obtained, it was observed that the compressive strength and split tensile strength increased significantly for all the curing ages from 0% to 50% replacement level of quarry dust. Maximum value obtained for 28day compressive and tensile strength were 25N/mm2 and 2.3N/mm2 respectively and this occurred at 50% replacement.

scholarly journals Optimum Percentage of Sawdust and Brick Ballast in Light Weight Concrete

2017 ◽  
Vol 5 (2) ◽  
pp. 112-122
Author(s):  
Neeru Singla ◽  
Mandeep Kumar
Keyword(s):  
Compressive Strength ◽  
Low Cost ◽  
Light Weight ◽  
River Sand ◽  
Natural Sand ◽  
Coarse Aggregates ◽  
Fine Aggregates ◽  
Conventional Material ◽  
Sand And Gravel ◽  
Made In

Construction industry relies heavily on conventional material such as cement, sand and gravel for the production of concrete The river sand and gravels which are most commonly used as fine aggregates and coarse aggregates respectively in the production of concrete, poses the problem of acute shortage in many areas, whose continued use has started posing serious problem with respect to its availability, cost and environmental impact. Attempt is being made in this project to use the locally available waste materials to replace the river sand and gravels to produce light weight and low cost concrete. Sawdust and Brick ballast are easily affordable at low costs, which are partially replaces with river sand and gravels respectively for making concrete. Natural sand and Gravels have been partially replaced (4% SD 8% BB, 4% SD 16% BB, 4% SD 24% BB, 8% SD 8% BB, 8% SD 16% BB, 8% SD 24% BB, 12% SD 8% BB, 12% SD 16% BB and 12% SD 24% BB. by using M30 grade of concrete) with sawdust and broken brick ballast respectively. For this, thirty concrete cubes of size 150mm X 150mm X 150mm have been casted and water cement ratio of 0.42 has been used. Water reducing admixture is used to increase the workability. Slump test, Compacting factor test and compressive strength at (28 days) of specimens having above combinations have been compared with control specimens. The workability and compressive strength gradually decreases for the increasing the replacement percentages. The optimum mix found to produce M30 grade of concrete is 8% of sawdust and 16% of Brick ballast.

scholarly journals A Review on Compressive Strength of Concrete Containing Waste Cathode Ray Tube Glass as Aggregates

2021 ◽  
Vol 1 (1) ◽  
pp. 1-14
Author(s):  
Nurul Noraziemah Mohd Pauzi
Keyword(s):  
Compressive Strength ◽  
Construction Material ◽  
Concrete Strength ◽  
Strength Properties ◽  
Partial Replacement ◽  
Natural Sand ◽  
Conventional Concrete ◽  
Fine Aggregates ◽  
Cathode Ray Tube ◽  
Recycling Techniques

The issue of the cathode ray tube (CRT) technology facing its end-of-time and increasing quantities across the globe has acquired the responsiveness of many researchers. The use of waste CRT glass as a construction material has fascinated them due to its significant advantage in recycling the hazardous and non-biodegradable waste CRT glass. However, lack of knowledge about the effects and features of CRT glass as a construction material could be a hindrance to the excessive utilization of waste CRT glass. Therefore, in order to establish the idea of using CRT waste glass as a more common construction material, this paper reviews several recycling techniques of CRT glass and further detail on the workability, density, and compressive strength properties of concrete and mortar using CRT glass (treated or untreated) as fine aggregates. The review showed that, generally, the use of CRT glass as a complete or partial replacement of natural sand shows a slight increase in density, workability, and concrete strength compared to conventional concrete. However, there are no clear trends that can be concluded as this review also showed that various factors influenced its performance, such as percentage replacement, particle size, lead (Pb) content, and types of admixtures.

Utilization of Cockle Shell (Anadara Granosa) as Partial Replacement of Fine Aggregates in Concrete

2021 ◽  
Vol 6 (2) ◽  
pp. 96-103
Author(s):  
Ranno Marlany Rachman ◽  
Try Sugiyarto Soeparyanto ◽  
Edward Ngii
Keyword(s):  
Compressive Strength ◽  
National Standard ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Concrete Technology ◽  
Normal Concrete ◽  
Fine Aggregates ◽  
Blood Clam ◽  
Anadara Granosa

This research aimed to utilize Anadara Granosa (Blood clam shell) clamshell waste as a new innovation in concrete technology and to investigate the effect of Anadara Granosa clamshell powder utilization as an aggregate substitution on the concrete compressive strength. The sample size was made of cylinders with a size of 10 cm x 20 cm with variations of clamshell powder 10%, 20% and 30% from the fine aggregate volume then soaked for 28 days as per the method of the Indonesian National Standard. The evaluation results exhibited that the slump value exceeded the slump value of normal concrete with a slump value of 0% = 160 mm, 10% = 165 mm, 20% = 180 mm and 30% = 180 mm. Additionally, it was found that the concrete compressive strength obtained post 28 days were 20.78 Mpa, 21.95 Mpa, 21.17 Mpa and 24.28 Mpa for normal concrete (0%), substitution concrete (10%), substitution concrete (20%) and substitution concrete (30%), respectively. Leading on from these results, it was concluded that the increment of Anadara Granosa clamshell powder substitution led to the increase of concrete compressive strength test.

scholarly journals Pengaruh Penambahan Sat Additive Addition H.E Terhadap Kuat Tekan Beton

2020 ◽  
Vol 2 (1) ◽  
pp. 31-57
Author(s):  
Ni Ketut Sri Astati Sukawati
Keyword(s):  
Compressive Strength ◽  
Concrete Mixture ◽  
Partial Replacement ◽  
Work Related ◽  
Coarse Aggregates ◽  
Alternative Ingredients ◽  
Fine Aggregates ◽  
Compressive Strength Test ◽  
Compressive Strength Of Concrete ◽  
Artificial Stone

Concrete with various variants is a basic requirement in building a building. The concrete mixture is diverse depending on the planning made beforehand. The cement mixture is usually in the form of a mixture of artificial stone, cement, water and fine aggregates and coarse aggregates. Aggregates (fine aggregates and coarse aggregates) function as fillers in concrete mixtures. (Subakti, A., 1994). However, in building construction, additives are often added, but there is still a sense of uncertainty at the time of dismantling the mold and the reference before the concrete reaches sufficient strength to carry its own weight and the carrying loads acting on it. To overcome the time of carrying out work related to concrete, it is necessary to find an alternative solution, for example by looking for alternative ingredients of concrete mixture on the basis of consideration without reducing the quality of the concrete. From the results of previous studies it was stated that due to the partial replacement of cement with Fly Ash, the strength of the pressure and tensile strength of the concrete had increased (Budhi Saputro, A., 2008). Based on the description above, the author seeks to examine how the compressive strength of concrete characteristics that occur by adding additives Addition H.E in the concrete mixture and is there any additive Additon H.E effect on the increase in the compressive strength characteristic of the concrete. From the results of the study, it was found that the compressive strength of the concrete with the addition of additives HE was that after the compressive strength test of the concrete cube was carried out and the analysis of concrete compressive strength of 10 specimens, in each experiment a cube specimen was made with the addition of additons. HE with a dose of 80 cc, 120 cc, and 200 cc can accelerate and increase the compressive strength of concrete characteristics.

scholarly journals Compression and Split Tensile Characteristics of Concrete Containing Quarry Residues

2019 ◽  
Vol 5 (5) ◽  
pp. 1-5
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Research Facility ◽  
River Sand ◽  
Split Tensile Strength ◽  
Fine Aggregates ◽  
Concrete Production ◽  
The World ◽  
Substitute Material ◽  
Quarry Dust

Waterway sand and pit sand are the most normally utilized fine aggregates for concrete creation in many parts of the world. Huge scale extraction of these materials presents genuine ecological risk in numerous parts of the nation. Aside from the ecological danger, there still exists the issue of intense lack in many regions. In this way, substitute material in place of river sand for concrete production should be considered. The paper means to examine the compressive and split tensile qualities of concrete produced using quarry residue, sand, and a blend of sand and quarry dust. The experimentation is absolutely research facility based. A total of 60 concrete cubes of size 150 mm x 150 mm x 150 mm, and 60 cylinders 150 mm in diameter and 300 mm deep, conforming to M50 grade were casted. All the samples were cured and tested with a steady water/concrete proportion of 0.31. Out of the 60 blocks cast, 20 each were made out of natural river sand, quarry dust and an equivalent blend of sand and quarry dust. It was discovered that the compressive strength and split tensile strength of concrete produced using the blend of quarry residue and sand was higher than the compressive qualities of concrete produced using 100% sand and 100% quarry dust.

scholarly journals Comparison of Conventional Concrete and Replacement of River Sand by Waste Foundry Sand and Cement by Nano-Silica

2020 ◽  
pp. 201-205
Keyword(s):  
Experimental Investigation ◽  
Compressive Strength ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Nano Silica ◽  
River Sand ◽  
Conventional Concrete ◽  
Foundry Sand ◽  
Concrete Production ◽  
Waste Foundry Sand

This paper presents an experimental investigation on the properties of concrete in which like cement is partially replacing by used nano silica and is partially replacing by used waste foundry sand. Because now a day the world wide consumption of sand as cement and as fine aggregate in concrete production is very high. Nano silica and waste foundry sand are major by product of casting industry and create land pollution. The cement will be replaced with nano silica and the river sand will be replaced with waste foundry sand (0%, 5%, 10%, 15%, 20%). This experimental investigation was done and found out that with the increase in the nano silica and waste foundry sand ratio. Compression test has been done to find out the compressive strength of concrete at the age of 7, 14, 21, and 28. Test result indicates in increasing compressive strength of plain concrete by inclusion of nano silica as a partial replacement of cement and waste foundry sand as a partial replacement of fine aggregate.

scholarly journals THE EFFECT OF QUARRY DUST WITH CEMENT BY-PRODUCTS ON PROPERTIES OF CONCRETE

2018 ◽  
Vol 30 (3) ◽  
Author(s):  
Jaharatul Dini Karen Lee Abdullah ◽  
Nazri Ali ◽  
Roslli Noor Mohamed ◽  
Mohammed Mu’azu Abdullahi
Keyword(s):  
Partial Replacement ◽  
Concrete Durability ◽  
River Sand ◽  
Natural Sand ◽  
Green Concrete ◽  
Granulated Blast Furnace Slag ◽  
Mineral Additions ◽  
Carbon Dioxide Co2 ◽  
The Cost ◽  
Quarry Dust

The numerous demanding application of concrete is not readily met with Ordinary Portland Cement (OPC) alone. To meet up the demand and as well as ensured the green concrete durability, it has becomes necessary to incorporate mineral additions with the best combination of others by-product as replacement to improve the performance without jeopardizing the strength of the concrete. In the construction industry, OPC cement and river sand are used as important building material making it scarce and limited. Whereas, as for the cement is well known as the biggest culprits for emitting carbon dioxide (CO2). Hence, partial replacement of cement becomes a necessity as well as natural sand in concrete by waste material or by-product without compromising the quality of the end product. Partial replacement with Ground Granulated Blast furnace Slag (GGBS), Fly Ash (PFA), Silica Fumes (SILICA) incorporates with 100% of Quarry Dust (QD) as sand replacement. The usage of 100% QD with OPC+PFA+SILICA (Mix 2) produced more durable concrete with good temperature control and better furnishing than with 100% river. In addition to the cost effect benefit, the reduction in depletion of river sand, addressing environment and sustainability issues, it is a valuable contribution in creating a green concrete.

Study on the Durability of Concrete with Mineral Admixtures to Sulfate Attack by Wet-Dry Cycle Method

2011 ◽  
Vol 295-297 ◽  
pp. 165-169
Author(s):  
Guan Guo Liu ◽  
Jing Ming ◽  
Xiong Wen Zhang ◽  
Ai Bin Ma
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Sulfate Attack ◽  
Mineral Admixture ◽  
Mineral Admixtures ◽  
Partial Replacement ◽  
Change Environment ◽  
Physical Mechanisms ◽  
Chemical Attack ◽  
Tidal Area

Sulfate attack is one of several chemical and physical mechanisms of concrete deterioration. In actual situation, concrete structures always suffer from the coupled effects of multifactor such as wet-dry cycle and sulfate attack when exposed to tidal area or groundwater level change environment. Partial replacement of cement with mineral admixture is one of the efficient methods for improving concrete resistance against sulfate attack. In this regard, the resistance of concrete with fly ash and slag to sulfate attack was investigated by wet-dry cycle method. The degree of sulfate attack on specimens after different cycles was observed using scanning electron microscopy. The results of compressive strength and percentage of compressive strength evolution factor at various cycling times show an increase in the sulfate resistance of concrete with 60% of fly ash and slag than that only with 40% fly ash. The microstructural study indicates that the primary cause of deterioration of concrete under wet-dry cycle condition is swelling of the sulfate crystal rather chemical attack.

Sign in / Sign up

Export Citation Format

Share Document