Equipment for thermal process

2020 ◽  
pp. 10-23
Author(s):  
D.V. Novikov
Keyword(s):  
Thermal Treatment ◽  
Research And Development ◽  
Thermal Process ◽  
New Products ◽  
Minimal Cost ◽  
Multiple Use ◽  
Thermal Equipment ◽  
Practical Research ◽  
The World ◽  
Vacuum Furnaces

The demand for efficient and qualitative thermal treatment makes certain requirements to the thermal equipment. The thermal equipment, that ideally corresponds to the assigned task of modern production facilities, is vacuum furnaces. The modern production requirements are the boundary conditions for the equipment manufacturers, focusing them on the need for all in one equipment capable of efficient wide production maneuvering, to ensure the possibility of developing and producing new products at minimal cost. As a result of practical research and development, focusing on the world experience and the real need for operation, the Sistem Teknik's article presents vacuum thermal equipment for multiple use – All in one. The equipment is controlled automatically, all parameters are regulated by the process master controller in compliance with the programmed cycle.

Equipment for thermal production

2021 ◽  
pp. 10-23
Author(s):  
D. V. Novikov
Keyword(s):  
Boundary Conditions ◽  
Structural Damage ◽  
New Products ◽  
Vacuum Furnace ◽  
Minimal Cost ◽  
High Productivity ◽  
Thermal Equipment ◽  
Practical Research ◽  
High Processing ◽  
Universal Equipment

The demand for efficient and high-quality heat treatment creates certain requirements for thermal equipment. Thermal equipment that perfectly meets the task of modern production enterprises is a universal vacuum furnace. The requirements of modern production are the boundary conditions for equipment manufacturers, focusing them on the need for universal equipment capable of rapid wide production maneuvering to ensure the possibility of mastering and releasing new products at minimal cost. As a result of practical research and development, focusing on the world experience and the real need for operation, the company Sistem Teknik presents in the article vacuum thermal equipment for universal use — All in one. The equipment is controlled automatically; all parameters are controlled by the process controller in accordance with the programmed cycle. The main advantages of operating All in one equipment from Sistem Teknik are the following: high productivity, minimizing human involvement in technological processes, high accuracy of all operations, long service life, flexibility of settings, the ability to process a huge range of materials, the ability to perform a full processing cycle without removing the load from the furnace, reliable equipment design that guarantees stable and safe operation, easy maintenance, quick changeover and obtaining uniform high processing results, the classic layout that guarantees high repair adaptability or maintainability, which is characterized by the possibility of eliminating certain structural damage with minimal time. The requirements of modern production are the boundary conditions for equipment manufacturers, focusing them on the need for universal equipment capable of rapid wide production maneuvering, to ensure the possibility of mastering and releasing new products at minimal cost.

scholarly journals Historia Y Evolución De La Industria De Semiconductores Y La Integración De México En El Sector

2016 ◽  
Vol 12 (18) ◽  
pp. 65 ◽  
Author(s):  
Alejandro Mercado Mercado ◽  
Manuel Martínez Facio ◽  
Fernando Favila Flores ◽  
Ana García Moya
Keyword(s):  
Research And Development ◽  
Semiconductor Industry ◽  
New Products ◽  
Developed Countries ◽  
Historical Evolution ◽  
Way Of Life ◽  
Professional Careers ◽  
The World ◽  
Import And Export ◽  
The Way

Semiconductors and their applications, represent one of the technological revolutions with greatest impact on society, generating Industrial changes, new companies, jobs, professional careers and development of new products that have given a twist in the way of life of people around the world. This has produced an industrial war between developed countries, which dispute the first place in terms of production, import and export of semiconductors. The semiconductors industry has given way to agreements and alliances between countries; allowing México to participate on the import, export and the formation of research and development in the industry. The present research, have as an objective to review theoretically the historical evolution of the semiconductor industry and the incorporation of México in the sector.

The chronicle of COVID-19: possible strategies to curb the pandemic

2020 ◽  
Vol 27 ◽  
Author(s):  
Rajesh Kumar ◽  
Seetha Harilal ◽  
Abdullah G. Al-Sehemi ◽  
Githa Elizabeth Mathew ◽  
Simone Carradori ◽  
...  
Keyword(s):  
Life Cycle ◽  
Research And Development ◽  
Vaccine Development ◽  
Therapeutic Strategies ◽  
Antiviral Drugs ◽  
Limited Data ◽  
Social Distancing ◽  
The World ◽  
Novel Virus ◽  
Day By Day

: COVID-19, an epidemic that emerged in Wuhan, has become a pandemic affecting worldwide and is in a rapidly evolving condition. Day by day, the confirmed cases and deaths are increasing many folds. SARS-CoV-2 is a novel virus; therefore, limited data are available to curb the disease. Epidemiological approaches, isolation, quarantine, social distancing, lockdown, and curfew are being employed to halt the spread of the disease. Individual and joint efforts all over the world are producing a wealth of data and information which are expected to produce therapeutic strategies against COVID-19. Current research focuses on the utilization of antiviral drugs, repurposing strategies, vaccine development as well as basic to advanced research about the organism and the infection. The review focuses on the life cycle, targets, and possible therapeutic strategies, which can lead to further research and development of COVID-19 therapy.

India as a Hub of Innovations for the Millions (I4M)

2018 ◽  
Author(s):  
Vijay Mahajan
Keyword(s):  
Quality Of Life ◽  
Young People ◽  
New Products ◽  
High Growth ◽  
Institutional Arrangements ◽  
Base Of The Pyramid ◽  
Large Economy ◽  
The World

This chapter deals with Indian ‘innovations for the millions’ (I4M)—new products, processes, and institutional arrangements—that sustainably improve the quality of life of those at the base of the pyramid. Taking ten examples which originated from the private, public, NGO and cooperative sectors, the chapter suggests that these innovations are a response of the ‘elite of calling’ to the Indian paradox – high growth in a large economy, co-existing with a very large number at the base of the pyramid. The chapter argues that a more supportive ecosystem needs to be built to foster I4M, including reforms in regulation and taxation, and attracting bright young people. If that happens Indian I4M can serve billions at the base of the pyramid around the world.

scholarly journals Antibiotic Pipeline Coordinators

2018 ◽  
Vol 46 (S1) ◽  
pp. 25-31 ◽  
Author(s):  
Enrico Baraldi ◽  
Olof Lindahl ◽  
Miloje Savic ◽  
David Findlay ◽  
Christine Årdal
Keyword(s):  
Research And Development ◽  
World Health ◽  
Resistant Bacteria ◽  
Antibiotic Resistant ◽  
Priority List ◽  
Non Profit ◽  
Global Priority ◽  
The World ◽  
New Antibiotics ◽  
Health Organization

The World Health Organization (WHO) has published a global priority list of antibiotic-resistant bacteria to guide research and development (R&D) of new antibiotics. Every pathogen on this list requires R&D activity, but some are more attractive for private sector investments, as evidenced by the current antibacterial pipeline. A “pipeline coordinator” is a governmental/non-profit organization that closely tracks the antibacterial pipeline and actively supports R&D across all priority pathogens employing new financing tools.

BRICS Countries Possible Areas for Scientific Cooperation

2015 ◽  
pp. 14-23
Author(s):  
I. Dezhina
Keyword(s):  
Research And Development ◽  
New Technologies ◽  
Technological Development ◽  
High Tech ◽  
Preliminary Evaluation ◽  
Exploratory Research ◽  
Scientific Cooperation ◽  
Brics Countries ◽  
The World ◽  
A Share

The article evaluates science sectors and effectiveness of scientific research in the countries forming the BRICS group, as well as the current state of scientific and technological cooperation among the group members. The science sectors of the countries under consideration differ markedly, while facing similar problems relating to government regulations and external environments. The differences exist in total expenditures on research and development (as a share of GNP), in the scope of governmental funding (large in Russia and India, but small in China), and in the distribution of allocations among various areas and types of R&D activities. China appears to have the most well-adjusted science sector among the BRICS members. It includes not only strong universities but also high-tech companies that invest actively into research and development. The overall impact (inferred from citation indexes) of fundamental and exploratory research performed in BRICS countries remains low. BRICS's scientists prefer to collaborate with their colleagues from the world-leading countries rather than with their fellows from BRICS. Yet, in contrast to the world trend, in all BRICS countries, except Russia, a share of internationally co-authored publications is now decreasing. BRICS members have more similar interests and priorities in technological development, including infrastructural and large technological projects, than in science. Currently, bilateral cooperation in technology prevails, while the projects involving all members of the group still remain at the stage of preliminary evaluation and discussion. Russia cooperates most closely with China and India, including joint projects in such high-priority directions as new materials, photonics, biomedical, space and information technologies. For Russia, cooperation in technological development appears to be of most interest because it can lead not only to introduction of new technologies but also help to create large Russian innovative companies. Development of successful multilateral cooperation in science and technology among the BRICS members is the key for this group, originally formed for geopolitical reasons, to evolve into an effective economic union.

New Product Development in Malaysia: Does Organizational Background Really Matter?

2014 ◽  
Vol 68 (3) ◽  
Author(s):  
Tan Owee Kowang ◽  
Amran Rasli ◽  
Choi Sang Long
Keyword(s):  
Product Development ◽  
Research And Development ◽  
New Product Development ◽  
New Products ◽  
New Product ◽  
Multinational Companies ◽  
Product Performance ◽  
Survey Questionnaire ◽  
New Product Performance ◽  
Npd Performance

New Product Development (NPD) is vital in assisting Research and Development (R&D) based organizations to adapt to the changes in markets and technology for competitive advantage. Ensuring the success of new products and optimization of new product performance is critical and essential for Research and Development based organizations.  Hence, this study is carried out to explore does organizational background in term of company’s ownership (i.e. local or multinational companies) and operational scales (i.e. number of Research and Development staffs) affect NPD performance of Research and Development companies in Malaysia. In line with this, 8 New Product Development performance attributes were identified from literature review. These attributes were subsequently formulated into a survey questionnaire and responded by 186 respondents. Thereafter, the effect of organizational ownership and operational scale toward NPD performance are examined separately via Independent Sample t-test and Analysis of Variance (ANOVA). Finding from the study revealed that the level of NPD performance in multinational R&D companies is higher than local R&D companies. Findings from this research also implied that NPD performance can be further improved by increasing number of R&D staffs.  

scholarly journals COMPARISON BETWEEN BRAZIL AND THE 30 MOST INNOVATIVE COUNTRIES IN THE WORLD

2018 ◽  
Vol 9 (1) ◽  
pp. 85 ◽  
Author(s):  
Marisa Moser ◽  
Mauri Aparecido de Oliveira
Keyword(s):  
Cluster Analysis ◽  
Research And Development ◽  
Stock Exchange ◽  
High Tech ◽  
Business Practices ◽  
Social Variables ◽  
External Relations ◽  
Historical Series ◽  
Workplace Organization ◽  
The World

Innovation can be defined as the implementation of a new or significantly improved product (good or service), or a process, a new marketing method, a new organizational  method in business practices, workplace organization, or external relations. This innovation can be measured by several factors such as investments in research and development, the concentration of high-tech companies traded on the stock exchange, among others. The present study aims to perform a cluster analysis to investigate the behavior of the most innovative countries when compared to Brazil. The study contemplates a historical series from the years 2012 to 2015 of the 30 most innovative countries in the world having been added to Brazil. In addition, a series of macroeconomic, political and social variables.

scholarly journals Talking about the Energy-saving Technical Measures in the Electrical Design of Buildings

1970 ◽  
Vol 1 (1) ◽  
Author(s):  
Zhang Mian
Keyword(s):  
Sustainable Development ◽  
Energy Consumption ◽  
Energy Conservation ◽  
Research And Development ◽  
Energy Saving ◽  
New Technologies ◽  
New Products ◽  
New Energy ◽  
Technical Measures

At present, people pay more attention to the energy consumption of building electrical design, the use of energy-saving design can maximize the energy conservation resources, and ultimately increase the pace of social sustainable development. Therefore, the energy-saving designers involved in the need to follow the economic rational, safe and feasible benchmark to select the appropriate energy-saving measures to increase research and development of new technologies, new products and new energy, the concept of sustainable development to be implemented. In view of this, this paper mainly analyzes the energy saving technical measures in the electrical design of thebuilding.

scholarly journals Inspiring Engineering in the K12: Biomimicry As a Bridge Between Math and Biology

2019 ◽  
Author(s):  
Fredrik Sanne ◽  
Inge Risheim ◽  
Thomas J. Impelluso
Keyword(s):  
Research And Development ◽  
Laboratory Experience ◽  
The Third ◽  
The World ◽  
Quantitative Design ◽  
Multi Phase ◽  
Design Inspiration

Abstract The discipline of biomimicry encourages engineers to take design inspiration from the nearly four billion years of research and development since life first appeared on Earth — nature is the greatest engineering designer. Rather than leveraging biomimicry as a discipline unto itself (a worthy approach, regardless), this project explores biomimicry as a tool to inspire K12 students to appreciate math and engineering. We conducted this project in four lesson modules and one lab. In the first module, we presented various types of engineering. In the second, we introduced certain aspects of mathematics from a qualitative perspective. In the third, we discussed the fundamental mathematics that undergirds thermodynamics, although qualitatively and visually. In the fourth, we introduced the students to the world of biomimicry. Then we integrated the mathematics and biomimicry with a laboratory experience in quantitative design, borrowed from an NSF sponsored project. In summary, efforts in biomimicry reside at either the quantitative arena of multi-phase physics, or the qualitative arena of biological interpretations. However, we have used it as a bridge to science, math and engineering.

Sign in / Sign up

Export Citation Format

Share Document