scholarly journals MODIFICATION OF SYNTHETIC RAW MATERIAL BASED ON SODIUM HYDROXIDE FOR PRODUCING GLASS

2021 ◽  
Vol 6 (8) ◽  
pp. 86-93
Author(s):  
D. Rasseko ◽  
R. Lavrov
Keyword(s):  
Chemical Composition ◽  
Sodium Hydroxide ◽  
Silicate Glass ◽  
Glass Batch ◽  
Raw Material ◽  
Formation Processes ◽  
Glass Making ◽  
Sodium Calcium ◽  
Heat Treated ◽  
A Charge

The research continues the direction of intensification of glass-making processes by completely replacing soda ash in the glass batch with sodium hydroxide to obtain a well-classified intermediate two-component raw material. A method for obtaining a modified synthetic raw material (SRMm) for producing sodium-calcium-silicate glass based on quartz-containing raw material and sodium hydroxide is considered. SRMm consists of two parts, the chemical composition of one of which corresponds to the low-melting eutectic on the Na2O-SiO2 diagram, in contrast to the prototype SRM, the chemical composition of which corresponds to the chemical composition of silicate glass. The products of the synthesis of parts of quartz sand and sodium hydroxide are mixed with the rest of the components of the glass batch of alkali-silicate glasses, followed by possible agglomeration by known methods. The results of a comparative X-ray phase analysis of experimental charges, as well as heat-treated pelletized samples, show more pronounced glass formation processes in a charge based on SRMm than using the prototype. The use of experimental charges can intensify the physicochemical reactions at the stage of melting in a glass-making furnace, reduce the maximum melting temperature of glass, reduce the carryover of dust-like components of the charge and the technogenic load on the environment.

scholarly journals Improvement of a Preparation Process of Chromite Raw Material Used for Ferroalloys and Pigments Manufacture

2015 ◽  
Vol 17 (3) ◽  
pp. 251
Author(s):  
K.T. Zhantasov ◽  
Zh.U. Myrhalykov ◽  
B.B. Turakulov ◽  
M.K. Zhantasov ◽  
E.N. Kocherov ◽  
...  
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Charge Composition ◽  
Material Base ◽  
Research Results ◽  
Heat Treated ◽  
Gas Consumption ◽  
Economic Indices ◽  
A Charge ◽  
Batch Formulation

<p>The given article contains the research results of carbon-containing chromite pellets’ production from off-grade raw material with application of internal coal-mining overburden rocks as flux. Besides, for the purpose of improvement of ecological situation in industrial regions and expansion of a raw-material base for ferrochrome and pigments manufacture we suppose to use in a charge composition the dust of aspiration units and electrostatic precipitators, which is formed at the preparation of raw materials and production of chromite pellets. The production technology of chromite pellets with use of a slime formed at the concentration of chrome ores as a binding substance was developed. Testing the suggested technology has been carried out in laboratory and trial conditions. The data of a chemical composition of initial components of a charge and calcined carbon-containing chromite pellets have shown economic and ecological efficiency of the developed technological process. Research results lead to the conclusion that the proposed granulation feedstock mixture pellets with a moisture content of 11–12% are obtained crude granules have a compressive strength of 2.3–3.2 kg/splashed. Increasing the content of Cr<sub>2</sub>O<sub>3</sub> in the pellets to 7.6% occurs due to the increase in the extraction of chromium oxide and due to the charge of chromium oxides contained in the sludge, as well as removal of the batch formulation was heat treated carbonates, and volatile organic substances. It was established that during this mode, the temperature in the lower layers is about 1200 °C, and a reduction in natural gas consumption achieves 50% and the residual carbon content in the pellets is about 1.5%, which leads to improvement of technical and economic indices of production chromite pellets and ferrochrome.</p>

Environmental benefits of magnesium hydroxide-based peroxide bleaching of mechanical pulp – mill results

TAPPI Journal ◽  
2013 ◽  
Vol 12 (6) ◽  
pp. 9-15 ◽  
Author(s):  
TOMI HIETANEN ◽  
JUHA TAMPER ◽  
KAJ BACKFOLK
Keyword(s):  
Sodium Hydroxide ◽  
Magnesium Hydroxide ◽  
Oxygen Demand ◽  
Pulp Mill ◽  
Transition Metal Ions ◽  
Environmental Benefits ◽  
Raw Material ◽  
Paper Machine ◽  
High Brightness ◽  
Peroxide Bleaching

The use of a new, technical, high-purity magnesium hydroxide-based peroxide bleaching additive was evaluated in full mill-scale trial runs on two target brightness levels. Trial runs were conducted at a Finnish paper mill using Norwegian spruce (Picea abies) as the raw material in a conventional pressurized groundwood process, which includes a high-consistency peroxide bleaching stage. On high brightness grades, the use of sodium-based additives cause high environmental load from the peroxide bleaching stage. One proposed solution to this is to replace all or part of the sodium hydroxide with a weaker alkali, such as magnesium hydroxide. The replacement of traditional bleaching additives was carried out stepwise, ranging from 0% to 100%. Sodium silicate was dosed in proportion to sodium hydroxide, but with a minimum dose of 0.5% by weight on dry pulp. The environmental effluent load from bleaching of both low and high brightness pulps was significantly reduced. We observed a 35% to 48% reduction in total organic carbon (TOC), 37% to 40% reduction in chemical oxygen demand (COD), and 34% to 60% reduction in biological oxygen demand (BOD7) in the bleaching effluent. At the same time, the target brightness was attained with all replacement ratios. No interference from transition metal ions in the process was observed. The paper quality and paper machine runnability remained good during the trial. These benefits, in addition to the possibility of increasing production capacity, encourage the implementation of the magnesium hydroxide-based bleaching concept.

PEAS AND PRODUCTS OF ITS PROCESSING OF - NONCONVENTIONAL RAW MATERIAL RESOURCES

2020 ◽  
Author(s):  
D.Y. Bolgova ◽  
◽  
N.A. Tarasenko ◽  
Z.S. Mukhametova ◽  
◽  
...  
Keyword(s):  
Chemical Composition ◽  
Human Health ◽  
Food Production ◽  
Food Industry ◽  
Raw Material ◽  
Plant Proteins ◽  
Material Resources ◽  
The Rich

Nutrition is an important factor that affects human health. The use of plant proteins as various additives in food production has now been actively developed. The rich chemical composition of pea grains determines the possibility of application in the food industry. Peas are characterized by good assimilability and degree of digestion.

Effect of metallographic structure and machining process on the apatite-forming ability of sodium hydroxide- and heat-treated titanium

2017 ◽  
Vol 29 (1) ◽  
pp. 109-118
Author(s):  
Toshiki Miyazaki ◽  
Takashi Sasaki ◽  
Yuki Shirosaki ◽  
Ken’ichi Yokoyama ◽  
Masakazu Kawashita
Keyword(s):  
Sodium Hydroxide ◽  
Machining Process ◽  
Metallographic Structure ◽  
Heat Treated

scholarly journals Geochemistry and Mineralogy of Ice-Dammed Lake Sediments of the Lębork Deposit

2021 ◽  
Author(s):  
Radosław Rogoziński ◽  
Alina Maciejewska
Keyword(s):  
Chemical Composition ◽  
Lake Sediments ◽  
Inductively Coupled Plasma ◽  
Mineralogical Composition ◽  
Raw Material ◽  
Element Analysis ◽  
X Ray ◽  
Dominant Component ◽  
Clay Deposits ◽  
Dammed Lake

AbstractVarved clay deposits from ice-dammed lakes are a particularly important and broadly applied raw material used for the production of high-quality ceramics (red bricks, roof tiles, etc.), but the mineralogy and geochemistry of these sediments are not fully understood. The aim of the present study was to determine the chemical and mineralogical composition of ice-dammed lake sediments of the Lębork deposit. Major-element analysis of the compositions of selected samples from the ice-dammed lake clays was performed by X-ray fluorescence (XRF) and trace elements were determined by inductively coupled plasma-mass spectrometry. The mineralogical composition of clay samples was determined by X-ray diffraction (XRD). Analyses of the chemical composition of the ice-dammed lake clays of the Lębork deposit showed that the dominant component was SiO2 with a mean content of 56.13 wt.%; the second most abundant component was Al2O3, with a mean content for the entire deposit of 11.61 wt.%. Analysis by ICP-MS indicated the presence of rare earth elements (REE), e.g. cerium, neodymium, lanthanum, and praseodymium; their mean contents are: 56.9, 27.0, 26.3, and 7.3 ppm, respectively. Mineralogical analysis of the varved clays identified quartz, muscovite, calcite, and clay minerals – illite, kaolinite, and montmorillonite. The material filling the Lębork basin is characterized by small lateral and vertical variability in chemical composition. The results of the present study may be of considerable importance in determining the parent igneous, metamorphic, and sedimentary rocks, the weathering products of which supplied material to the ice-dammed lake, as well as in determining the mechanisms and character of the sedimentation process itself.

Sedimentary Clays as Geopolymer Precursor

2018 ◽  
Vol 39 ◽  
pp. 97-111
Author(s):  
F. Mostefa ◽  
Nasr Eddine Bouhamou ◽  
H.A. Mesbah ◽  
Salima Aggoun ◽  
D. Mekhatria
Keyword(s):  
Sodium Hydroxide ◽  
Mineralogical Composition ◽  
Cementitious Materials ◽  
Raw Material ◽  
X Ray Diffraction ◽  
Calcination Time ◽  
Calorimetric Analysis ◽  
X Ray ◽  
Before And After ◽  
Mechanical Performances

This work aims to study the feasibility of making a geopolymer cement based on dredged sediments, from the Fergoug dam (Algeria) and to evaluate their construction potential particularly interesting in the field of special cementitious materials. These sediments due to their mineralogical composition as aluminosilicates; are materials that can be used after heat treatment. Sedimentary clays were characterized before and after calcination by X-ray diffraction, ATG / ATD, spectroscopy (FTIR) and XRF analysis. The calcination was carried out on the raw material sieved at 80 μm for a temperature of 750 ° C, for 3.4 and 5 hours. The reactivity of the calcined products was measured using isothermal calorimetric analysis (DSC) on pastes prepared by mixing an alkaline solution of sodium hydroxide (NaOH) 8 M in an amount allowing to have a Na / Al ratio close to 1 (1: 1). Also, cubic mortar samples were prepared with a ratio L / S: 0.8, sealed and cured for 24 hours at 60 ° C and then at room temperature until the day they were submited to mechanical testing. to check the extent of geopolymerization. The results obtained allowed to optimize the calcination time of 5 hours for a better reactivity of these sediments, and a concentration of 8M of sodium hydroxide and more suitable to have the best mechanical performances.

Chemical Composition of Ice Containing Tephra Layers in the Byrd Station Ice Core, Antarctica

1988 ◽  
Vol 30 (3) ◽  
pp. 315-330 ◽  
Author(s):  
Julie M. Palais ◽  
Philip R. Kyle
Keyword(s):  
Chemical Composition ◽  
Silicate Glass ◽  
Residence Time ◽  
Volcanic Ash ◽  
Global Climate ◽  
Ice Core ◽  
Volcanic Eruptions ◽  
Tephra Layers ◽  
The Antarctic ◽  
Hydrolysis Of

The chemical composition of ice containing tephra (volcanic ash) layers in 22 sections of the Byrd Station ice core was examined to determine if the volcanic eruptions affected the chemical composition of the atmosphere and precipitation in the vicinity of Byrd Station. The liquid conductivity, acidity, sulfate, nitrate, aluminum, and sodium concentrations of ice samples deposited before, during, and after the deposition of the tephra layers were analyzed. Ice samples that contain tephra layers have, on average, about two times more sulfate and three to four times more aluminum than nonvolcanic ice samples. The acidity of ice samples associated with tephra layers is lowered by hydrolysis of silicate glass and minerals. Average nitrate, sodium, and conductivity are the same in all samples. Because much of the sulfur and chlorine originally associated with these eruptions may have been scavenged by ash particles, the atmospheric residence time of these volatiles would have been minimized. Therefore the eruptions probably had only a small effect on the composition of the Antarctic atmosphere and a negligible effect on local or global climate.

On-site sodium metal production with electrolysis by offshore wind or solar cell power generation for hydrogen generation

2009 ◽  
Vol 1216 ◽  
Author(s):  
Masataka Murahara ◽  
Kazuichi Seki ◽  
Yuji Sato ◽  
Etsuo Fujiwara
Keyword(s):  
Power Generation ◽  
Solar Cell ◽  
Sodium Hydroxide ◽  
Hydrogen Generation ◽  
Raw Material ◽  
Offshore Wind ◽  
Hydrogen Storage Material ◽  
Metal Production ◽  
Sodium Metal ◽  
By Products

AbstractSodium metal reacts with water explosively to generate hydrogen. Therefore, sodium metal can have an important role as a hydrogen storage material. Seawater contains water most and sodium second. Seawater is electrolyzed by offshore wind or solar cell power generation to produce sodium; which is transported to a thermoelectric power plant on land and then is reacted with water to produce hydrogen for electric power generation. Sodium hydroxide, a by-product, is used as a raw material for soda industries. In the sodium production process, many by-products such as fresh water, magnesium, sodium hydroxide, hydrochloric acid, and sulfuric acid are produced. Thus, sodium metal is an economical, renewable, and sustainable fuel that discharges neither CO2 nor radioactivity.

The Research of Iron Containing Wastes Modification Process of Leninabad Rare Metals Plant

2021 ◽  
Vol 410 ◽  
pp. 778-783
Author(s):  
Pavel V. Matyukhin ◽  
Daler I. Mirzoev
Keyword(s):  
Chemical Composition ◽  
Building Materials ◽  
Raw Material ◽  
Filling Material ◽  
Rare Metals ◽  
X Ray ◽  
Modification Process ◽  
Before And After ◽  
The Republic ◽  
Enrichment Process

The paper presents the results of ferriferous wastes modification process research carried on the basis of JCS “Leninobad rare metals Plant” located in the Republic of Tajikistan. The wastes for the study were taken from the western tailing. The article presents the justification of the chosen wastes as a filling material in the development of new radiation protective composite building materials. The data on the initial ferriferous chemical composition of the tailing wastes and the chemical composition of the material that passed the enrichment process is presented. The study contains microphotos of ferriferous haematite raw material particles surface before and after completing the modifying process. The paper presents and describes the study of X-ray phase analysis diffractograms of enriched iron-containing wastes before and after the modification process. The current research proves that the enrichment ferriferous wastes particles modification process is possible and as a result it can be used as a filling for the development of new kinds of radioprotective composite materials.

Adjustment of a technology of cast iron smelting in the blast furnace of jsc "ural steel" w ith a volume of 1232 см3 with charge h a v in g 95% share of Mikhailovskii GOK pellets

2021 ◽  
Vol 77 (7) ◽  
pp. 768-775
Author(s):  
I. F. Iskakov ◽  
G. A. Kunitsyn ◽  
D. V. Lazarev ◽  
А. А. Red`kin ◽  
S. A. Trubitsyn ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Iron Ore ◽  
Raw Materials ◽  
Raw Material ◽  
Material Base ◽  
Hot Metal ◽  
Charging System ◽  
Iron Smelting ◽  
Gas Consumption ◽  
A Charge

To use effectively internal raw material base, JSC “Ural Steel” accomplished I category major overhaul of the blast furnace No. 2. The main purpose of the overhaul was to design a rational profile which could ensure an ability to operate with a charge containing 95 % of Mikhailovskii GOK (mining and concentrating plant) pellets having basicity of 0.5 by CaO/SiO2. The blast furnace No. 2 having useful volume of 1232 m3, was constructed by design of Danieli Corus, the Netherlands, and was blown in on December 30, 2020. In the process of guarantee tests, step-by-step increase of Mikhailovskii GOK pellets (Fetotal = 60.5 %, CaO/SiO2 = 0.5) content in the charge iron ore part was being accomplished from 55 to 95.1%. Charging of the blend containing pellets in the amount of 55% of iron ore part, was done by charging system 4OOCC + 1COOCC (Ore - Coke) with filling level 1.5 m. Under conditions of pellets part increase in the blend, the charging system was changed to decrease their content at the periphery, to increase it in the ore ridge zone and make it intermediate between periphery and the ore ridge. At the pellets share in the iron ore raw materials 0.75 the charging system was used as the following: 3OOCC + 1COOC + 1COOCC, while at the content 95.1% the following charging system was used: 2COOC + 2COOC + 1COOCC. It was noted that in the period of guarantee tests the furnace running was smooth. The average silicon content in the hot metal was 0.70% at the standard deviation 0.666. Sulfur content in the hot metal did not exceed 0.024%, the blowing and natural gas consumption figures were 2100 m3/min and 11000 m3/min correspondently, oxygen content in the blowing 26.5%, hot blowing and top smoke pressure figures were 226.5 and 109.8 KPa correspondently. The productivity of the furnace was reached as high as 2358 t/day at the specific coke rate 433 kg/t of hot metal. After guarantee tests completion, the pellets content in the iron ore part was decreased gradually from 95 down to 50%. The decreasing was made by 5% in every 6 hours of operation. Application of the mastered technology of the blast furnace No. 2 with the increased share of pellets will enable to stably supply the blast furnaces No. 1, 3 and 4 by iron ore raw materials in the proportion of 30-35% of pellets and 65-70% of sinter.

Sign in / Sign up

Export Citation Format

Share Document