Анализ геотехнологий ремонта и мониторинг канализационных тоннелей в сложных инженерно-геологических условиях

2019 ◽  
pp. 42-54
Author(s):  
N. Perminov ◽  
Maksim, Klement’ev ◽  
A. Perminov ◽  
G. Pankova
Keyword(s):  
Wear Rate ◽  
Technical Condition ◽  
Technical Literature ◽  
Natural Origin ◽  
Advantages And Disadvantages ◽  
Technogenic Impact ◽  
Sustainable Operation ◽  
Ground Conditions ◽  
Main Factors ◽  
Selection Of

Изложен комплексный подход к выбору геотехнологий реконструкции канализационных тоннелей на протяженных участках в сложных грунтовых условиях, при техногенных воздействиях и непрерывном транспортировании стоков. На основе анализа опыта эксплуатации длительно функционирующих канализационных тоннелей, а также результатов инструментального обследования их технического состояния описаны основные факторы техногенного и природного характера, снижающие конструкционную безопасность и устойчивость функционирования наиболее нагруженных участков системы тоннельных коллекторов водоотведения. Отмечено отсутствие данных по этому вопросу в нормативной базе и технической литературе. Приведены преимущества и недостатки применяемых технологий санации канализационных тоннелей. Предложены рекомендации и требования к санации тоннелей в зависимости от грунтовых условий, степени износа, протяженности участка, динамики транспортирования сточных вод.A comprehensive approach to the selection of geotechnologies for the reconstruction of long sections of sewer tunnels in complicated ground conditions, under technogenic impact and continuous transportation of effluents is described. Based on the analysis of operating longrunning sewer tunnels, as well as the results of an instrumental examination of their technical condition, the main factors of technogenic and natural origin that reduce their design safety and sustainable operation of the most loaded sections of the system of sewer tunnels are described. The lack of data on this issue in the regulatory framework and technical literature is noted. The advantages and disadvantages of the applied technologies of sewer tunnel rehabilitation are given. Recommendations and requirements to the rehabilitation of tunnels are proposed depending on the ground conditions, wear rate, section length, dynamics of wastewater transportation.

An Analysis on Structure Type Selection and Optimization of the Formtraveller for Cantilever Construction

2013 ◽  
Vol 454 ◽  
pp. 140-144
Author(s):  
Xiao Yu Liu ◽  
Liang Li
Keyword(s):  
Comparative Analysis ◽  
Structure Type ◽  
Advantages And Disadvantages ◽  
Working Space ◽  
Type Selection ◽  
Structural Rigidity ◽  
Steel Consumption ◽  
Main Factors ◽  
Cantilever Construction ◽  
Selection Of

Aiming at the advantages and disadvantages of triangle and rhombic main truss-types and their respective scopes of application, a comparative analysis for the two commonly used truss-type formtravellers has been done. The main factors for analysis are load bearing capability, structural rigidity, steel consumption and working space. It provides a useful reference for the design and selection of the formtraveller. In addition, for the overall deformation of the formtraveller, it is structural optimized while height of column of the truss and suspenders are changed. Finally, the analysis results show the reasonable height of the column and suspender arrangement to achieve the construction target of safety and cost-effectiveness.

Grammatical Difficulties of Automatic Translation of Scientific and Technical Literature

2019 ◽  
Vol 26 (27) ◽  
pp. 134-141
Author(s):  
Aliona Kolesnichenko ◽  
Natalya Zhmayeva
Keyword(s):  
Key Words ◽  
Technical Literature ◽  
Automatic Translation ◽  
Advantages And Disadvantages ◽  
Grammatical Errors ◽  
Translation Service

The article is devoted to the analysis of grammatical difficulties encountered in the process of automatic translation. The paper discusses the advantages and disadvantages of the SDL Trados automatic translation service. The types of grammatical errors when translating scientific and technical texts in SDL Trados are classified, the ways of overcoming them are outlined. Key words: scientific and technical literature, automatic translation, grammatical difficulties.

METHODS FOR RESTORING WOLVES OF ROLLING PRODUCTION

2020 ◽  
Vol 4 (141) ◽  
pp. 114-122
Author(s):  
DAR’YA LEBEDEVA ◽  
◽  
ANNA KARPUNICHEVA
Keyword(s):  
Thermal Effects ◽  
Machine Building ◽  
Research Purpose ◽  
Technical Literature ◽  
Production Methods ◽  
Advantages And Disadvantages ◽  
Rolling Production ◽  
Machine Parts ◽  
The Stability ◽  
High Degree

Large forces and significant thermal effects are created on the rolls when rolling sheets. The higher the stability of the rolls, the less downtime during their rerolling and higher productivity. (Research purpose) The research purpose is in analyzing the ways of restoring rolls and choose the most appropriate method for restoring these parts. (Materials and methods) The article presents the analysis of the scientific and technical literature on the topic of rolling production, methods for restoring large-sized machine parts of machine-building and metallurgical industries that work in difficult conditions and are subject to a high degree of wear. Authors try to solve the problem by means of comparative and logical analysis based on theoretical and empirical methods of scientific research. (Results and discussion) The article presents two groups of methods for restoring rolled rolls: banding and surfacing the working layer of the roll. Authors have analyzed each method in terms of technology, equipment, and feasibility. The article presents the advantages and disadvantages of the methods under consideration. (Conclusions) The most acceptable way to restore parts with a high degree of wear is surfacing. It is most efficient to apply submerged surfacing using an additional hot additive. Such surfacing, despite some complication of the equipment design, allows to deposit the metal on the roll with low heat input and in most cases in one pass. Surfacing using an additional hot additive allows to increase the productivity of the process by up to 250 percent while reducing the penetration depth by 2-3 times and saving energy by up to 40 percent.

Strategies of maintenance and repair of agricultural machinery

2020 ◽  
pp. 38-48
Author(s):  
Aleksey S. Dorokhov ◽  
Aleksandr V. Denisov ◽  
Aleksey A. Solomashkin ◽  
Valeriy S. Gerasimov
Keyword(s):  
Wear Rate ◽  
Technical Condition ◽  
Research Purpose ◽  
Agricultural Machinery ◽  
Maintenance And Repair ◽  
Wear Rates ◽  
Urgent Task ◽  
Machine Parts ◽  
Current Value ◽  
Agricultural Machines

Modern machines are subject to progressive wear that occurs at different rates, which leads to unpredictable failures that reduce the reliability and durability of machines. The strategy of maintenance and repair is aimed at eliminating these problems. (Research purpose) The research purpose is in analyzing the basic principles of the strategy of maintenance and repair of agricultural machinery in order to ensure control of the technical condition of machine parts. (Materials and methods) When resource diagnostics is used, , the allowable value of the parameter is set in advance for a part . This value is the tolerance that corresponds to a certain wear rate of the part. The tolerance is set based on the condition that if the current value of the controlled resource parameter during the next diagnosis is less than the set value, then such a part at the current value of the wear rate can be finalized until the next inter-control check. Taking into account the wear rate of the same type of parts from the group when determining the allowable wear during their resource diagnostics becomes an urgent task. (Results and discussions) As a result of research, the article presents "Methodology for determining the main indicators of reliability of parts of agricultural machines with different wear rates" and "Methodology for determining the tolerance system of parts of agricultural machines with different wear rates". (Conclusions) The article presents the tolerance system that reduces the probability of failure of machine parts in operation. During resource diagnostics, those parts whose resource parameters exceed the tolerance are rejected.

scholarly journals A Systematic Literature Review of Multi-Criteria Decision-Making Methods for Sustainable Selection of Insulation Materials in Buildings

2021 ◽  
Vol 13 (2) ◽  
pp. 737
Author(s):  
Indre Siksnelyte-Butkiene ◽  
Dalia Streimikiene ◽  
Tomas Balezentis ◽  
Virgilijus Skulskis
Keyword(s):  
Decision Making ◽  
Literature Review ◽  
Systematic Literature Review ◽  
Energy Demand ◽  
Energy Performance ◽  
Future Research ◽  
Multi Criteria Decision Making ◽  
Insulation Materials ◽  
Advantages And Disadvantages ◽  
Selection Of

The European Commission has recently adopted the Renovation Wave Strategy, aiming at the improvement of the energy performance of buildings. The strategy aims to at least double renovation rates in the next ten years and make sure that renovations lead to higher energy and resource efficiency. The choice of appropriate thermal insulation materials is one of the simplest and, at the same time, the most popular strategies that effectively reduce the energy demand of buildings. Today, the spectrum of insulation materials is quite wide, and each material has its own specific characteristics. It is recognized that the selection of materials is one of the most challenging and difficult steps of a building project. This paper aims to give an in-depth view of existing multi-criteria decision-making (MCDM) applications for the selection of insulation materials and to provide major insights in order to simplify the process of methods and criteria selection for future research. A systematic literature review is performed based on the Search, Appraisal, Synthesis and Analysis (SALSA) framework and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. In order to determine which MCDM method is the most appropriate for different questions, the main advantages and disadvantages of different methods are provided.

The selection of the main axis and the forming plane in automatic profiling and stamping lines

2021 ◽  
pp. 44-48
Author(s):  
O.M. Koryagina
Keyword(s):  
Main Axis ◽  
Labor Costs ◽  
Simple Shape ◽  
Small Thickness ◽  
Advantages And Disadvantages ◽  
The Third ◽  
Large Length ◽  
Straight Lines ◽  
Light Profiles ◽  
Selection Of

The article defines the main axis and the profiling plane in automatic profiling and stamping lines. Specific recommendations are given for choosing the position of the main axis and the profiling plane, depending on the configuration of the manufactured parts of the roll-formed section. Under the general name of profiling in the practice of stamping works, it is meant to obtain rigid and light profiles of large length and various configurations from sheet blanks. Profiling is carried out in four ways: in dies on crank presses, in dies on special bending presses, on universal bending machines (edging machines), on profiling roller machines. The first method, profiling on crank presses, is used for complex semi-closed and open profiles of relatively small length, if there are no special bending presses or profiling machines. The second method, profiling on special bending presses, is used for open and semiclosed profiles up to 5 mm long. The advantage of such presses is the possibility of using simple, and therefore cheap, tools in the manufacture. The third method, profiling on universal bending machines (edging machines), is used for bending parts (profiles of a simple shape in straight lines with different coupling radii determined by the radius of the machine ruler, for which the latter has a set of rulers). Bending machines allow bending materials of small thickness. Low productivity and the need for physical labor costs limit the use of these machines. The fourth method, profiling on roller machines, is used for open, semi-closed and closed profiles. The essence of the profiling process is to gradually change the profile drawing of a flat belt to a given profile when it is moved sequentially through several pairs of shaped rollers arranged sequentially one after the other in the same plane and rotating at the same speed. The article describes in detail the fourth method; the advantages and disadvantages are noted.

Approaches to the Organization of International Accounting in Russian Enterprises

TEM Journal ◽  
2021 ◽  
pp. 249-258
Author(s):  
Ekaterina V. Surkova ◽  
Galina A. Skachko ◽  
Larisa K. Nikandrova ◽  
Maria M. Starkova ◽  
Nina F. Sakharova
Keyword(s):  
Financial Reporting ◽  
Accounting Information ◽  
Financial Statements ◽  
Reporting Standards ◽  
Optimal Method ◽  
Accounting Standard ◽  
Financial Reporting Standards ◽  
Advantages And Disadvantages ◽  
The Individual ◽  
Selection Of

The article discusses current issues of transformation of accounting information in accordance with international financial reporting standards (IFRS). This study is primarily aimed at developing approaches that determine the need for Russian enterprises to provide accounting information comparable at the international level. The authors analyze methods of transferring data from the Russian Accounting Standard (RAS) to IFRS. The methods used to form financial statements in accordance with IFRS are discussed. The issues of the application of these methods, as well as their advantages and disadvantages, are discussed. The author's approach to the selection of the optimal method of transformation is proposed taking into account the individual needs of organizations.

scholarly journals Acute Ischemic Stroke: A Review of Imaging, Patient Selection, and Management in the Endovascular Era. Part II: Patient Selection, Endovascular Thrombectomy, and Postprocedure Management

2018 ◽  
Vol 02 (03) ◽  
pp. 169-183
Author(s):  
Sharath Kumar G G ◽  
Chinmay Nagesh
Keyword(s):  
Ischemic Stroke ◽  
Acute Ischemic Stroke ◽  
Patient Selection ◽  
Secondary Brain Injury ◽  
Selection Methods ◽  
Vessel Occlusion ◽  
Endovascular Thrombectomy ◽  
Advantages And Disadvantages ◽  
Imaging Patient ◽  
Selection Of

AbstractAppropriate patient selection and expedient recanalization are the mainstay of modern management of acute ischemic stroke (AIS). Only a minority of patients (7–15%) of patients are eligible for endovascular therapy. Patient selection may be time based or perfusion based. Central to both paradigms is the selection of a patient with a small core, a significant penumbra that can be differentiated from areas of oligemia. A brief review of patient selection methods is presented. Endovascular thrombectomy techniques using stentrievers or aspiration catheters have now become the treatment of choice for AIS with large vessel occlusion. A range of devices, each with its own advantages and disadvantages, are available in the market for the neurointerventionist to choose. Techniques vary between devices and between operators, but standardization and protocolization are important within each center. Complications must be anticipated to be avoided. Once reperfusion is achieved, outcomes must be safeguarded with competent postprocedure management to prevent secondary brain injury. These aspects are reviewed in this article.

scholarly journals ANALYSIS OF EXTERNAL ENGINEERING NETWORK METHODS

2020 ◽  
Vol 4 (157) ◽  
pp. 7-11
Author(s):  
V. Zhvan ◽  
V. Donenko ◽  
S. Kulish ◽  
A. Taran
Keyword(s):  
Physical And Mechanical Properties ◽  
Directional Drilling ◽  
Horizontal Directional Drilling ◽  
Technological Parameters ◽  
Optimal Method ◽  
Advantages And Disadvantages ◽  
Analytical Review ◽  
Conducting Research ◽  
The Cost ◽  
Selection Of

The article is devoted to the effective analysis of trench and trenchless pipeline laying technologies. In the course of the work, an analytical review of pipeline assembly was performed, the main technological parameters, the scope of each method, and their advantages and disadvantages were determined. List of considered pipeline laying methods: trenching, horizontal directional drilling, mechanical puncture, hydraulic puncture, microtunneling and punching. The article analyzes the classical trench method and the most widely used trenchless ones: horizontal directional drilling; mechanical puncture; hydraulic puncture; microtunneling; punching. Each of these methods has several advantages and disadvantages. The choice of the optimal method of laying the pipeline depends on many factors: the physical and mechanical properties of soils and hydrogeological conditions, the length and diameter of the pipeline, the presence of other communications, buildings and structures, as well as the budget that customers have. Work time is the last deciding factor. Based on the results of the analysis of pipeline laying technologies and expert survey of construction industry experts, the cost table of each method was compiled, outlining the main characteristics of the technology: length of pipeline, speed of work, scope, cost, and the advantages and disadvantages of each of the considered methods. The conclusions about the use of each of the pipeline laying methods were made. Each of the methods has its advantages and disadvantages, so to choose the method of work it is necessary to conduct a comprehensive assessment of technological parameters, cost, scope and timing of work. The cost of lay-ing the pipeline consists of the following factors: conducting research; selection of diameter and determination of pipeline length; choice of laying method and equipment necessary for the works; selection of equipment, shut-off and control equipment and other materials arranged on the pipeline; terms of performance of works. Taking into account these factors, an estimate is made, which determines the cost of installation of a particular pipeline. After the analysis, we can conclude that among the methods of trenchless laying of pipelines can be identi-fied horizontally directional drilling, it is this method of laying the pipeline will be appropriate to use for our region. The drilling technique allows to carry out pipelines under obstacles, to pull long segments of networks, to repair site damage. This method is universal and can be used in almost any environment. Keywords: trenches, horizontal directional drilling, mechanical puncture, hydraulic piercing, microtunnelling, punching, pipeline.

scholarly journals ABOUT THE NECESSITY TO DETERMINE THE TECHNICAL CONDITION OF BUILDINGS OF STRATEGIC IMPORTANCE IN UNGHENI DISTRICT FROM REPUBLIC OF MOLDOVA

2021 ◽  
Vol XXVIII (2) ◽  
pp. 103-111
Author(s):  
Ion Rusu ◽  
◽  
Ion Cretu ◽  
Keyword(s):  
Research Methods ◽  
Housing Stock ◽  
Present Situation ◽  
Technical Condition ◽  
The Real ◽  
Republic Of Moldova ◽  
Advantages And Disadvantages

This paper deals with the need to determine the technical condition of strategic buildings, blocks of flats, which are in a precarious condition as well as engineering networks located within the Ungheni district. The article refers to the real present situation of buildings and housing stock from Ungheni municipality, including their periods of commissioning. Current research methods of buildings are exposed, being listed their advantages and disadvantages.

Sign in / Sign up

Export Citation Format

Share Document