scholarly journals Lifetime and Performance Improvement of HSS Drill Bit by Titania (TiO2) Nano-Coatings and Cryogenic Treatment

2019 ◽  
Vol 8 (6) ◽  
pp. 1389-1393
Keyword(s):  
High Speed ◽  
Cryogenic Treatment ◽  
Cutting Tools ◽  
Pure Titanium ◽  
High Speed Steel ◽  
Target Material ◽  
Drill Bit ◽  
Sem Images ◽  
X Ray ◽  
Drill Bits

The small and medium scale industry in drilling and cutting sector widely use cutting tools made by High Speed Steel (HSS). The improvement of lifetime of HSS drill bits helps these establishments to achieve product economy. The improvement in the performance and service lifetime of high-speed steel (HSS) twisted drill bits are studied by depositing Titanium dioxide (TiO2 ) nano-coatings using reactive dc magnetron sputtering Method. Pure titanium (99.99%) metal is used as target material for making nano-coatings in oxygen atmosphere. X-ray diffraction studies indicated change of phase of annealed samples compared to as-deposited coatings. X-ray reflection (XRR) measurements estimated nanocoating thickness on the HSS drill bit around 100nm. The lifetime of TiO2 nano-coated, and cryogenically treated nano-coated tools significantly improved compared to uncoated (bare) HSS drill bit. The tool life has been enhanced by about 16% when TiO2 nano-coatings were made on HSS drill bits. Further lifetime enhancement of 10% was observed when the nanocoated drill bit is given cryogenic treatment in liquid nitrogen. SEM images and EDS profiles are reported. The minimum surface roughness measured as 7.296x10-6m for TiO2 coated and cryo-treated HSS drill tool.

Characteristic properties of AlTiN and TiN coated HSS materials

2015 ◽  
Vol 67 (2) ◽  
pp. 172-180 ◽  
Author(s):  
Mumin Sahin ◽  
Cenk Misirli ◽  
Dervis Özkan
Keyword(s):  
Surface Roughness ◽  
Tensile Strength ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Wear Properties ◽  
Content Type ◽  
X Ray ◽  
Number Of Cycles ◽  
Future Work

Purpose – The purpose of this paper is to examine mechanical and metallurgical properties of AlTiN- and TiN-coates high-speed steel (HSS) materials in detail. Design/methodology/approach – In this study, HSS steel parts have been processed through machining and have been coated with AlTiN and TiN on physical vapour deposition workbench at approximately 6,500°C for 4 hours. Tensile strength, fatigue strength, hardness tests for AlTiN- and TiN-coated HSS samples have been performed; moreover, energy dispersive X-ray spectroscopy and X-ray diffraction analysis and microstructure analysis have been made by scanning electron microscopy. The obtained results have been compared with uncoated HSS components. Findings – It was found that tensile strength of TiAlN- and TiN-coated HSS parts is higher than that of uncoated HSS parts. Highest tensile strength has been obtained from TiN-coated HSS parts. Number of cycles for failure of TiAlN- and TiN-coated HSS parts is higher than that for HSS parts. Particularly TiN-coated HSS parts have the most valuable fatigue results. However, surface roughness of fatigue samples may cause notch effect. For this reason, surface roughness of coated HSS parts is compared with that of uncoated ones. While the average surface roughness (Ra) of the uncoated samples was in the range of 0.40 μm, that of the AlTiN- and TiN-coated samples was in the range of 0.60 and 0.80 μm, respectively. Research limitations/implications – It would be interesting to search different coatings for cutting tools. It could be the good idea for future work to concentrate on wear properties of tool materials. Practical implications – The detailed mechanical and metallurgical results can be used to assess the AlTiN and TiN coating applications in HSS materials. Originality/value – This paper provides information on mechanical and metallurgical behaviour of AlTiN- and TiN-coated HSS materials and offers practical help for researchers and scientists working in the coating area.

Hardening of Selective Laser Melted M2 Steel

2021 ◽  
Author(s):  
Mei Yang ◽  
Yishu Zhang ◽  
Haoxing You ◽  
Richard Smith ◽  
Richard D. Sisson
Keyword(s):  
Heat Treatment ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
High Hardness ◽  
Steel Part ◽  
X Ray Diffraction ◽  
X Ray ◽  
Heat Treated ◽  
Near Net Shape

Abstract Selective laser melting (SLM) is an additive manufacturing technique that can be used to make the near-net-shape metal parts. M2 is a high-speed steel widely used in cutting tools, which is due to its high hardness of this steel. Conventionally, the hardening heat treatment process, including quenching and tempering, is conducted to achieve the high hardness for M2 wrought parts. It was debated if the hardening is needed for additively manufactured M2 parts. In the present work, the M2 steel part is fabricated by SLM. It is found that the hardness of as-fabricated M2 SLM parts is much lower than the hardened M2 wrought parts. The characterization was conducted including X-ray diffraction (XRD), optical microscopy, Scanning Electron Microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) to investigate the microstructure evolution of as-fabricated, quenched, and tempered M2 SLM part. The M2 wrought part was heat-treated simultaneously with the SLM part for comparison. It was found the hardness of M2 SLM part after heat treatment is increased and comparable to the wrought part. Both quenched and tempered M2 SLM and wrought parts have the same microstructure, while the size of the carbides in the wrought part is larger than that in the SLM part.

Improvement of Tool Life of a Commercial Drill Bits by Cryogenic Treatment While Machining Widmanstatten Ti-6Al-4V.

2021 ◽  
Author(s):  
Abdullah Sert ◽  
Fatih Hayati ÇAKIR
Keyword(s):  
Tool Wear ◽  
Tool Life ◽  
Cutting Forces ◽  
Cutting Tool ◽  
Cryogenic Treatment ◽  
Cutting Tools ◽  
Drill Bit ◽  
Deep Cryogenic Treatment ◽  
Drill Bits ◽  
Stereo Microscope

Abstract In this study, the performance of Ø 8 mm WC-Co (10%) drill bits with a TiAlN coating was tested for machining of Ti6Al4V alloy with a Widmanstatten structure. In order to improve the tool life, cutting tools were subjected to deep cryogenic treatment. In total, three groups of tools were prepared for this study. The first group was used for reference as the supplied state; the second group was subjected to 24 hours deep cryogenic treatment at -196 ° C, and the third group was subjected to 24 hours deep cryogenic at -196 ° C, additionally was tempered 2 hours at 200 ° C. Machining experiments were done by drilling and a set of 60 holes were drilled with each drill bit, and tool wear were observed and recorded with a stereo microscope. Additionally, Scanning Electron Microscope (SEM) and Energy Dispersive Spectroscopy (EDS) analyses were carried on to understand the tool wear better. The microhardness of Cryo-treated and tempered cutting tools hardness increased up to 20 Hv (about 1%), and the toughness value did not change significantly. Cutting performance was observed by measuring the cutting forces during drilling experiments. According to these results, deep cryogenic treatment on WC-Co-based inserts decreased cutting forces by approximately 7% compared to the reference drill bit, which affected the cutting tool life. The dominant wear mechanism was Built-up edge (BUE) formation, and cryo-treatment lowered the BUE amount 8% and cryo-treated and tempered drill bit 45% compared to the reference drill bit.

scholarly journals The influence of drill point geometry on tool life

2018 ◽  
Vol 12 (1) ◽  
pp. 1-4 ◽  
Author(s):  
Zlatko Botak ◽  
Marko Horvat
Keyword(s):  
Surface Quality ◽  
High Speed ◽  
High Speed Steel ◽  
Solid Material ◽  
Processing Parameters ◽  
Drill Bit ◽  
Drill Bits ◽  
Steel Drill ◽  
Drill Point ◽  
Efficiency Comparison

Drilling is a cutting process that uses a rotary cutting tool to cut a cylindrical hole in a solid material. During machining, drill bits are exposed to rapid wear at high temperature. Sometimes, due to an ecological need for dry technology without any lubricant, the use of drill bits with coatings is required, typically titanium nitride (TiN), titanium carbon nitride (TiCN) or titanium aluminium nitride (TiAlN). This paper presents research on drilling done to determine how drill point geometry affects the drill lifetime and finished surface quality. We compared the chip removal ability and surface quality of bored holes in Hardox 500 created with high-speed steel drill bits and drill bits manufactured from hard metals, with and without coatings, under constant processing parameters. A cost/efficiency comparison was also carried out with respect to drill bit fabrication, sharpening, and use. Based on the data obtained on the damage drill points, the most economical drill bit for processing holes was determined.

Performance Evaluation of Cryogenically Treated Worn CBN Insert by Turning Process

2012 ◽  
Vol 504-506 ◽  
pp. 1323-1328 ◽  
Author(s):  
S. Thamizhmanii ◽  
K. Rajendran ◽  
Mohideen Rasool ◽  
Sulaiman Hassan
Keyword(s):  
High Speed ◽  
Cryogenic Treatment ◽  
Cutting Tools ◽  
High Speed Steel ◽  
High Strength ◽  
Depth Of Cut ◽  
Operating Parameters ◽  
Rough Machining ◽  
Closed Chamber ◽  
Cryogenic Process

Machining of materials is to produce desired shape and size with smooth surfaces for the performance. Machining is carried out using various cutting tools starting high speed steel to recently developed tools like CBN and PCBN etc. These tools are used to machine difficult to cut materials like high strength alloy steels, stainless steel, Inconel 718, Titanium etc. The inserts used are thrown out or no longer required for finish machining. It can be used for rough machining where smooth surface is not primary important and subjected to subsequent machining using fresh inserts. The used inserts can be used subsequently by subjecting them cryogenic treatment at – 196◦ C in a closed chamber. It is longer process for more than 30 hours in a liquid nitrogen chamber. This treatment gives additional strength to cutting inserts to improve the cutting ability and wear resistance. The components used in high strength applications like an aerospace, automobile industries are treated with cryogenic process to improve wear strength. The operating parameters are cutting velocity, feed rate and constant depth of cut. In this research, CBN inserts after turning for 750 mm length was cryogenically treated and again used with same operating parameters as previous machining conditions. Each inserts were measured for flank wear by Scanning Electron Microscope (SEM) after treatment and re-used with same turning conditions as before. Performances of all inserts used were producing the same results or results near to same. The treated inserts were acting as fresh cutting edges. The results showed that cryogenically processed CBN inserts performed very close to previous results.

Study of the Damage of Drills in Dry Drilling of NM360 Steels

2012 ◽  
Vol 268-270 ◽  
pp. 275-278 ◽  
Author(s):  
Ming San Xu ◽  
Ji Bin Jiang ◽  
Shou Jin Zeng
Keyword(s):  
High Speed ◽  
Impact Load ◽  
Wedge Angle ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Feed Speed ◽  
Twist Drill ◽  
Drilling Performance ◽  
Drill Bits ◽  
Main Factor

According to the characteristics of NM360, a contrast experiment for drilling performance in YG8 cemented carbide twist drill, high-speed steel twist drill and factories used in coating the ordinary high-speed steel twist drill has been done. Using microscope to observe the damage of drills, we found that form this experiment some causation in tool invalidation that tool breakage is main factor for the high-speed steel drill bits, brittle fracture is main factor for carbide drill bits. Brittle carbide cutting tools, feed speed too much impact load is too large, causing the blade fracture. As the tool edge wedge angle is too small, poor edge strength, easy chipping, edge wedge angle can not be too small.

scholarly journals Cutting performance of deep cryogenic treated and nitrided HSS cutting tool inserts

2019 ◽  
Vol 13 (3) ◽  
pp. 213-217
Author(s):  
Sanja Šolić ◽  
Zdravko Schauperl ◽  
Vlado Tropša
Keyword(s):  
Wear Resistance ◽  
High Speed ◽  
Cutting Tool ◽  
Cryogenic Treatment ◽  
Single Point ◽  
Cutting Tools ◽  
Cutting Speed ◽  
High Speed Steel ◽  
Cutting Performance ◽  
Deep Cryogenic Treatment

High speed steel (HSS) is a very important industrial tool material and has been constantly improved for different wear resistance applications and cutting tools, i.e. drills, milling cutters, hobs and for the cutting tools in which the economical cutting speed is too low for choosing the carbide tools. The properties of HSS depend significantly on the parameters of the conducted heat treatment. In this paper, the influence of deep cryogenic treatment in combination with nitriding of metallurgical powder metallurgy HSS on the wear resistance was measured. Additionally, the cutting performance in a single point cutting tool machinability test at the configuration of the dry low-speed turning of steel was investigated. The results showed that deep cryogenic treatment itself, and in combination with nitriding, resulted in the reduction of the wear rate. The results of the single point cutting tool machinability test showed that deep cryogenic treated and nitrided HSS inserts performed worse than the classically heat-treated inserts and deep cryogenic treated HSS inserts exhibited approximately the same flank wear as the nitrided ones.

UNS T11310

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills

Abstract UNS No. T11310 is the high vanadium type of molybdenum high-speed steel. It is a deep-hardening steel and offers high cutting ability and excellent finishing properties. It is a general-purpose steel for cutting tools and is used in such applications as taps, lathe tools and reamers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: TS-490. Producer or source: Tool steel mills.

ELECTRITE COBALT

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Steel Company

Abstract ELECTRITE COBALT is a 5% cobalt type high-speed steel recommended for heavy duty cutting tools. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-89. Producer or source: Latrobe Steel Company.

GUTERL M-2

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Good Resistance ◽  
Special Steel ◽  
Steel Corporation ◽  
Circular Saws

Abstract GUTERL M-2 is a molybdenum-tungsten type of high-speed steel with fairly good resistance to decarburization. It is a general-purpose high-speed steel and it provides excellent resistance to abrasion and shock. It is used widely for cutting tools. Among its many applications are hack saws, circular saws, lathe tools, gear cutters, planer tools and wood knives. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-387. Producer or source: Guterl Special Steel Corporation.

Sign in / Sign up

Export Citation Format

Share Document