Determination of microbiological activity during the processing of frost damaged sugar beets

2014 ◽  
pp. 228-231 ◽  
Author(s):  
Maciej Wojtczak ◽  
Aneta Antczak-Chrobot ◽  
Edyta Chmal-Fudali ◽  
Agnieszka Papiewska

The aim of the study is to evaluate the kinetics of the synthesis of dextran and other bacterial metabolites as markers of microbiological contamination of sugar beet.

Agronomy ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 814 ◽  
Author(s):  
Renata Kuśmierek-Tomaszewska ◽  
Jacek Żarski ◽  
Stanisław Dudek

The primary purpose of this work was to assess the need for irrigation in sugar beet cultivated in the temperate climate of the Kujawsko-Pomorskie region of Poland based on meteorological data from the period 1981–2010. The work was also aimed at determining the tendency of changes in the frequency and intensity of droughts during the period of high water needs for sugar beets (spanning July–August) and confirming the hypothesis that agricultural drought may be identified based on the indicator of meteorological drought—Standardized Precipitation Index (SPI). The occurrence of meteorological droughts amounted to 26.7–40.0%, depending on location. No significant trend of increasing dryness was found; however, quite the opposite, an upward tendency was identified, which indicates an improvement of precipitation conditions over time. It was found that sugar beet production in a temperate climate is carried out in the conditions of precipitation deficits, which amount to an average of 32–49 mm and a maximum of 112–173 mm in July–August, but the deficits showed neither significant nor targeted changes with time. A strong, significant relationship between meteorological (SPI) and agricultural (Pdef) drought indicators allows for a determination of sugar beet irrigation needs solely based on information on normalized precipitation values (SPI).


2015 ◽  
pp. 149-155
Author(s):  
Jan Iciek ◽  
Marek Ludwicki ◽  
Edyta Chmal-Fudali

The paper presents a possibility of controlling the level of microbiological contamination of juice in a tower extractor system by means of redox potential measurement using the sensor and transducer designed by the authors. The study was conducted during the 2013/14 sugar beet campaign. The type and level of microbial contamination and at the same time the value of electromotive force (EMF), pH value and temperature was measured in the juice collected from half the height of the tower extractor. The determination of measurement characteristics of the sensor and transducer and also the microbiological methodology are described. The advantages and disadvantages of using pH value or redox potential measurement to control microbiological contamination of juice in the tower extractor are characterized.


2016 ◽  
pp. 517-524 ◽  
Author(s):  
Martin Wegener ◽  
Natalie Balgheim ◽  
Maik Klie ◽  
Carsten Stibbe ◽  
Bernd Holtschulte

KWS SAAT SE and Bayer CropScience AG are jointly developing and commercializing an innovative system of weed control in sugar beet for the global market under the name of CONVISO SMART. The technology is based on the breeding of sugar beet cultivars that are tolerant to herbicides of the ALS-inhibitor-class with a broad-spectrum weed control. This will give farmers a new opportunity to make sugar beet cultivation easier, more flexible in its timing and more efficient. The use of CONVISO, as new herbicide in sugar beet, will make it possible to control major weeds with low dose rates of product and reduced number of applications in the future. The tolerance is based on a change in the enzyme acetholactate synthase, which is involved in the biosynthesis of essential amino acids. This variation can occur spontaneously during cell division. During the development, sugar beets with this spontaneously changed enzyme were specifically selected and used for further breeding of CONVISO SMART cultivars. As such, these varieties are not a product of genetic modification. Field studies with CONVISO SMART hybrids showed complete crop selectivity and a broad and reliable efficacy against a large range of major weeds. The bio-dossier for an EU-wide registration of CONVISO was submitted in April in 2015. The variety inscription process is in preparation in different countries. The system CONVISO SMART is scheduled to be available to farmers in 2018 at the earliest.


2019 ◽  
pp. 392-400 ◽  
Author(s):  
Gunnar Kleuker ◽  
Christa M. Hoffmann

The harvest of sugar beet leads to root tip breakage and surface damage through mechanical impacts, which increase storage losses. For the determination of textural properties of sugar beet roots with a texture analyzer a reliable method description is missing. This study aimed to evaluate the impact of washing, soil tare, storage period from washing until measurement, sample distribution and number of roots on puncture and compression measurements. For this purpose, in 2017 comprehensive tests were conducted with sugar beet roots grown in a greenhouse. In a second step these tests were carried out with different Beta varieties from a field trial, and in addition, a flexural test was included. Results show that the storage period after washing and the sample distribution had an influence on the puncture and compression strength. It is suggested to wash the roots by hand before the measurement and to determine the strength no later than 48 h after washing. For reliable and comparable results a radial distribution of measurement points around the widest circumference of the root is recommended for the puncture test. The sample position of the compression test had an influence on the compressive strength and therefore, needs to be clearly defined. For the puncture and the compression test it was possible to achieve stable results with a small sample size, but with increasing heterogeneity of the plant stand a higher number of roots is required. The flexural test showed a high variability and is, therefore, not recommended for the analysis of sugar beet textural properties.


2018 ◽  
Vol 69 (5) ◽  
pp. 1139-1144
Author(s):  
Iosif Lingvay ◽  
Adriana Mariana Bors ◽  
Livia Carmen Ungureanu ◽  
Valerica Stanoi ◽  
Traian Rus

For the purpose of using three different types of painting materials for the inner protection of the transformer vats, their behavior was studied under actual conditions of operation in the transformer (thermal stress in electro-insulating fluid based on the natural ester in contact with copper for electro-technical use and electro-insulating paper). By comparing determination of the content in furans products (HPLC technique) and gases formed (by gas-chromatography) in the electro-insulating fluid (natural ester with high oleic content) thermally aged at 130 �C to 1000 hours in closed glass vessels, it have been found that the presence the investigated painting materials lead to a change in the mechanism and kinetics of the thermo-oxidation processes. These changes are supported by oxygen dissolved in oil, what leads to decrease both to gases formation CO2, CO, H2, CH4, C2H4 and C2H6) and furans products (5-HMF, 2-FOL, 2 -FAL and 2-ACF). The painting materials investigated during the heat treatment applied did not suffer any remarkable structural changes affecting their functionality in the electro-insulating fluid based on vegetable esters.


1985 ◽  
Vol 50 (8) ◽  
pp. 1642-1647 ◽  
Author(s):  
Štefan Baláž ◽  
Anton Kuchár ◽  
Ernest Šturdík ◽  
Michal Rosenberg ◽  
Ladislav Štibrányi ◽  
...  

The distribution kinetics of 35 2-furylethylene derivatives in two-phase system 1-octanol-water was investigated. The transport rate parameters in direction water-1-octanol (l1) and backwards (l2) are partition coefficient P = l1/l2 dependent according to equations l1 = logP - log(βP + 1) + const., l2 = -log(βP + 1) + const., const. = -5.600, β = 0.261. Importance of this finding for assesment of distribution of compounds under investigation in biosystems and also the suitability of the presented method for determination of partition coefficients are discussed.


1999 ◽  
Vol 64 (11) ◽  
pp. 1770-1779 ◽  
Author(s):  
Herbert Mayr ◽  
Karl-Heinz Müller

The kinetics of the electrophilic additions of four diarylcarbenium ions (4a-4d) to tricarbonyl(η4-cyclohepta-1,3,5-triene)iron (1) have been studied photometrically. The second-order rate constants match the linear Gibbs energy relationship log k20 °C = s(E + N) and yield the nucleophilicity parameter N(1) = 3.69. It is concluded that electrophiles with E ≥ -9 will react with complex 1 at ambient temperature.


Author(s):  
Yasujiro Murata ◽  
Shih-Ching Chuang ◽  
Fumiyuki Tanabe ◽  
Michihisa Murata ◽  
Koichi Komatsu

We present our study on the recognition of hydrogen isotopes by an open-cage fullerene through determination of binding affinity of isotopes H 2 /HD/D 2 with the open-cage fullerene and comparison of their relative molecular sizes through kinetic-isotope-release experiments. We took advantage of isotope H 2 /D 2 exchange that generated an equilibrium mixture of H 2 /HD/D 2 in a stainless steel autoclave to conduct high-pressure hydrogen insertion into an open-cage fullerene. The equilibrium constants of three isotopes with the open-cage fullerene were determined at various pressures and temperatures. Our results show a higher equilibrium constant for HD into open-cage fullerene than the other two isotopomers, which is consistent with its dipolar nature. D 2 molecule generally binds stronger than H 2 because of its heavier mass; however, the affinity for H 2 becomes larger than D 2 at lower temperature, when size effect becomes dominant. We further investigated the kinetics of H 2 /HD/D 2 release from open-cage fullerene, proving their relative escaping rates. D 2 was found to be the smallest and H 2 the largest molecule. This notion has not only supported the observed inversion of relative binding affinities between H 2 and D 2 , but also demonstrated that comparison of size difference of single molecules through non-convalent kinetic-isotope effect was applicable.


Sign in / Sign up

Export Citation Format

Share Document