scholarly journals Pharmacobotanical characterization of Monteverdia ilicifolia (Mart. ex Reiss.) Biral leaves and its adulterants sold as medicinal tea in Brazil: a contribution to quality control

Author(s):  
Fernanda Moreira do Amaral ◽  
◽  
Sarah de Sá Rego Monteiro ◽  
Thiago Fernandes ◽  
Dulcinéia Furtado Teixeira ◽  
...  

Leaves of Monteverdia ilicifolia (“espinheira-santa”) are considered a medicinal tea by the Brazilian Sanitary Surveillance Agency (Anvisa), by their anti-dyspeptic, anti-acid and protective of the gastric mucosa properties. Their spiny margins are similar to those of other botanical species, which may lead to misidentifications. The aim of this work was to evaluate the authenticity of 32 samples of herbal drugs commercialized as “espinheira-santa” in the formal trade in Brazil, by macro and microscopic morphological studies of the leaves. The evaluation of the botanical authenticity was based on leaf venation patterns, shape and anatomy of the petiole and midrib region in cross section, vascular system arrangement and epidermal characters. Analysis of these characters compared to literature data suggests that 34% of the samples are M. ilicifolia and the remaining 66% are Sorocea bonplandii, a species with no clinical studies assuring its effective and safe use, representing thus a potential risk to public health.

2008 ◽  
Vol 14 (S3) ◽  
pp. 107-108
Author(s):  
R. Serrano ◽  
P. Ferreira ◽  
E.T. Gomes ◽  
O. Silva

The first step in quality control of herbal drugs is ensuring the correct identification of the plant intended for use. The required analytical procedures (macroscopic characterization of the entire or fragmentized material, microscopic characterization after pulverization of the plant material and chemical characterization), are usually described on quality monographs reported in authoritarian texts such as the European 6th Pharmacopoeia. Further information related to the name of the each herbal drug, the herbal drug definition, purity tests and assay are also provided.


2020 ◽  
Vol 9 (9) ◽  
pp. e435997346
Author(s):  
Fernanda Moreira do Amaral ◽  
Sarah de Sá Rego Monteiro ◽  
Juliana da Conceição Peres Leitão ◽  
Selma Ribeiro de Paiva ◽  
Ana Joffily

This work analyzed the labels of medicinal teas from formal trade, according to the specific legislation. Thirty samples of herbal drugs included in the Form of Phytotherapeutics of the Brazilian Pharmacopeia were photographed in commercial establishments in Rio de Janeiro state, Brazil, and analyzed according to the Resolution of Anvisa RDC 26/2014 and the Form. Information related to the botanical nomenclature, plant part, guidelines for preparation, warnings, claims, and orientations for use was inconsistent with the official standards in most samples, and 77% were marketed as food products, although the studied species are not regulated for the commercialization in the food area. The consumption of herbal products in disagreement with the official recommendations may cause toxic effects or lack of the expected benefits. The irregularities identified suggest the absence or failure in quality control and a lack of concern for the scientific botanical nomenclature, exposing the public health to risks.


Author(s):  
Margaret L. Sattler ◽  
Michael A. O'Keefe

Multilayered materials have been fabricated with such high perfection that individual layers having two atoms deep are possible. Characterization of the interfaces between these multilayers is achieved by high resolution electron microscopy and Figure 1a shows the cross-section of one type of multilayer. The production of such an image with atomically smooth interfaces depends upon certain factors which are not always reliable. For example, diffusion at the interface may produce complex interlayers which are important to the properties of the multilayers but which are difficult to observe. Similarly, anomalous conditions of imaging or of fabrication may occur which produce images having similar traits as the diffusion case above, e.g., imaging on a tilted/bent multilayer sample (Figure 1b) or deposition upon an unaligned substrate (Figure 1c). It is the purpose of this study to simulate the image of the perfect multilayer interface and to compare with simulated images having these anomalies.


Author(s):  
Dirk Doyle ◽  
Lawrence Benedict ◽  
Fritz Christian Awitan

Abstract Novel techniques to expose substrate-level defects are presented in this paper. New techniques such as inter-layer dielectric (ILD) thinning, high keV imaging, and XeF2 poly etch overflow are introduced. We describe these techniques as applied to two different defects types at FEOL. In the first case, by using ILD thinning and high keV imaging, coupled with focused ion beam (FIB) cross section and scanning transmission electron microscopy (STEM,) we were able to judge where to sample for TEM from a top down perspective while simultaneously providing the top down images giving both perspectives on the same sample. In the second case we show retention of the poly Si short after removal of CoSi2 formation on poly. Removal of the CoSi2 exposes the poly Si such that we can utilize XeF2 to remove poly without damaging gate oxide to reveal pinhole defects in the gate oxide. Overall, using these techniques have led to 1) increased chances of successfully finding the defects, 2) better characterization of the defects by having a planar view perspective and 3) reduced time in localizing defects compared to performing cross section alone.


Author(s):  
Nicholas Randall ◽  
Rahul Premachandran Nair

Abstract With the growing complexity of integrated circuits (IC) comes the issue of quality control during the manufacturing process. In order to avoid late realization of design flaws which could be very expensive, the characterization of the mechanical properties of the IC components needs to be carried out in a more efficient and standardized manner. The effects of changes in the manufacturing process and materials used on the functioning and reliability of the final device also need to be addressed. Initial work on accurately determining several key mechanical properties of bonding pads, solder bumps and coatings using a combination of different methods and equipment has been summarized.


2020 ◽  
Vol 20 ◽  
Author(s):  
Miribane Dërmaku-Sopjani ◽  
Mentor Sopjani

Abstract:: The coronavirus disease 2019 (COVID-19) is currently a new public health crisis threatening the world. This pandemic disease is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The virus has been reported to be originated in bats and by yet unknown intermediary animals were transmitted to humans in China 2019. The SARSCoV- 2 spreads faster than its two ancestors the SARS-CoV and Middle East respiratory syndrome coronavirus (MERSCoV) but has reduced fatality. At present, the SARS-CoV-2 has caused about a 1.16 million of deaths with more than 43.4 million confirmed cases worldwide, resulting in a serious threat to public health globally with yet uncertain impact. The disease is transmitted by inhalation or direct contact with an infected person. The incubation period ranges from 1 to 14 days. COVID-19 is accompanied by various symptoms, including cough, fatigue. In most people the disease is mild, but in some other people, such as in elderly and people with chronic diseases, it may progress from pneumonia to a multi-organ dysfunction. Many people are reported asymptomatic. The virus genome is sequenced, but new variants are reported. Numerous biochemical aspects of its structure and function are revealed. To date, no clinically approved vaccines and/or specific therapeutic drugs are available to prevent or treat the COVID-19. However, there are reported intensive researches on the SARSCoV- 2 to potentially identify vaccines and/or drug targets, which may help to overcome the disease. In this review, we discuss recent advances in understanding the molecular structure of SARS-CoV-2 and its biochemical characteristics.


2020 ◽  
Vol 17 (1) ◽  
pp. 172-183
Author(s):  
Nandanwadkar Shrikrishna Madhukar Hema ◽  
Mastiholimath Vinayak Shivamurthy ◽  
Pulija Karunakar

Introduction: Capsaicin (8-methy-N-vanillyl-6-nonenamide), a potential analgesic derived from Capsicum annuum (Chili peppers), widely used from ancient times for its pharmacological activities such as anti-inflammatory, anti-oxidant and analgesic and provides relief from migraine and diabetes. But for obvious reasons, capsaicin cannot be administered directly. The present work was designed with a focus to comply with mandatory requirement in various pharmacopeias to know the actual content of API present in final formulations. The formulation (TS3) consisting of 3% lipid, with 4:6 ratio of the polymer and solvent, was found to be the optimized formulation, which gave the best evaluation with regard to the particle size (97.03±2.68) nm, polydispersity index (0.20±0.00), higher zeta potential (61.28±2.06) mv, morphological studies and highest drug entrapment efficiency (68.34±4.24)%. The prepared transferosome formulation was subjected to characterization by validated HP-TLC method consisting of N-Hexane: Tert- Iso-butyl-methyl ether in ratio (5:15) v/v. Linearity was performed in the range of 50-1500 ng/spot with LOD/LOQ 50 ng and 150 ng, with regression analysis (R) of 99.91%. Recovery analysis was performed at 3 different levels at 80, 100 and 120 with an average recovery of 106.97%, respectively. Till now, no analytical method has been reported, associated with the characterization of pharmaceutical nano-forms (Capsaicin), like transferosomes. Thus, the maiden validated HP-TLC method for concurrent analysis of capsaicin as API in nano-transferosome may be employed in process quality control of formulations containing the said API. Background: The irritability and adverse effects post application, leading to inflammation and neural pain at the site of administration of newly Capsaicin API and its chemical entities and marketed formulations are usually related to poor permeability, leading to drug complex reactions in the development phases or therapeutic failure along with the quantification of the same in blood plasma. However, advancement in drug formulations with the use of polymer: alcohol ratio and modernized analytical techniques for the quantification of Pharmaceutical APIs seems to be emerging and promising for overcoming pain and related inflammatory complications by formulating the APIs in Transferosome formulation with Validated HP-TLC technique being used as an effective economic and precise tool for quantitative analysis of APIs in their respective nano-forms. Objective: The study proposes a novel standardized method development and validation of pharmaceutical nanoforms with Capsaicin as API. Method: Capsaicin Transferosomes were formulated using Ultra probe sonication by utilizing different proportions of phospholipid 90G dissolved in a mixture of ethanol and propylene glycol. The formulation was subjected to Dynamic Light Scattering (DLS) technique for nano-particle analysis followed by characterization with respect to particle size, polydispersity index, zeta potential and entrapment efficiency. The morphological study of vesicles was determined using SEM and TEM. A Validated HP-TLC method for the identification and determination of Capsaicin in transferosomes formulation was performed as per the ICH guidelines. Results: The formulation gave the best evaluation for particle size (97.03±2.68) nm, polydispersity index (0.20±0.00), higher zeta potential (61.28±2.06) mv, morphological studies (SEM & TEM) and highest drug entrapment efficiency (68.34±4.24)%. DSC thermograms and FTIR spectral patterns confirmed no physical interaction by polymers with API. The prepared formulation was then characterized using HP-TLC method. The best resolution was found in NHexane: Tert-Isobutyl methyl ether in a ratio of 5:15 v/v. The Rf was found to be 0.3±0.03. Linearity was performed in a range of 50-1500 ng/spot, with regression analysis (R) of 99.91% Further, recovery analysis was done at 3 different levels as 80, 100 and 120 with an average recovery of 106.97%. The LOD/LOQ was found to be 50 and 150 ng, respectively. Precision was carried out in which % RSD was found to be precise and accurate. Conclusion: The outcomes of the present study suggested that the proposed novel formulation analyzed by Validated planar chromatographic technique (HP-TLC) for Capsaicin quantification in nanoforms may be employed as a routine quality control method for the said API in various other formulations.


Sign in / Sign up

Export Citation Format

Share Document