scholarly journals The effect of nanovoid elongation on electron multiplication during (sub)nanosecond electrical breakdown

Author(s):  
Ján TUNGLI ◽  
Petr BÍLEK ◽  
Zdeněk BONAVENTURA
2020 ◽  
Vol 90 (6) ◽  
pp. 913
Author(s):  
А.В. Ханефт

A numerical simulation of the electrical breakdown in dynamic mode of single crystals of ammonium perchlorate has been carried out. The system of differential equations was solved, which described the processes in the equivalent circuit of the pulse voltage generator together with the kinetic equation of impact electron multiplication and the heat balance equation. The dependences of the electric strength of ammonium perchlorate in dynamic mode on the interelectrode distance and the duration of the leading edge of a high voltage pulse were calculated. Obtained numerical simulation results are in good agreement with the known experimental data of electrical breakdown of ammonium perchlorate in the dynamic mode.


Author(s):  
David M. Shuttleworth ◽  
Mary Drummond Roby

Abstract Interaction of inline SEM inspections with tungsten window-1 integrity were investigated. Multiple SEMs were utilized and various points in the processing were inspected. It was found that in certain circumstances inline SEM inspection induced increased window-1 contact resistance in both source/drain and gate contacts, up to and including electrical opens for the source/drain contacts.


Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 123
Author(s):  
Bin Cao ◽  
Ji-Wei Dong ◽  
Ming-He Chi

Water impurity is the essential factor of reducing the insulation performance of transformer oil, which directly determines the operating safety and life of a transformer. Molecular dynamics simulations and first-principles electronic-structure calculations are employed to study the diffusion behavior of water molecules and the electrical breakdown mechanism of transformer oil containing water impurities. The molecular dynamics of an oil-water micro-system model demonstrates that the increase of aging acid concentration will exponentially expedite thermal diffusion of water molecules. Density of states (DOS) for a local region model of transformer oil containing water molecules indicates that water molecules can introduce unoccupied localized electron-states with energy levels close to the conduction band minimum of transformer oil, which makes water molecules capable of capturing electrons and transforming them into water ions during thermal diffusion. Subsequently, under a high electric field, water ions collide and impact on oil molecules to break the molecular chain of transformer oil, engendering carbonized components that introduce a conduction electronic-band in the band-gap of oil molecules as a manifestation of forming a conductive region in transformer oil. The conduction channel composed of carbonized components will be eventually formed, connecting two electrodes, with the carbonized components developing rapidly under the impact of water ions, based on which a large number of electron carriers will be produced similar to “avalanche” discharge, leading to an electrical breakdown of transformer oil insulation. The water impurity in oil, as the key factor for forming the carbonized conducting channel, initiates the electric breakdown process of transformer oil, which is dominated by thermal diffusion of water molecules. The increase of aging acid concentration will significantly promote the thermal diffusion of water impurities and the formation of an initial conducting channel, accounting for the degradation in dielectric strength of insulating oil containing water impurities after long-term operation of the transformer.


Electronics ◽  
2021 ◽  
Vol 10 (13) ◽  
pp. 1600
Author(s):  
Matthew Gaddy ◽  
Vladimir Kuryatkov ◽  
Nicholas Wilson ◽  
Andreas Neuber ◽  
Richard Ness ◽  
...  

The suitability of GaN PCSSs (photoconductive semiconductor switches) as high voltage switches (>50 kV) was studied using a variety of commercially available semi-insulating GaN wafers as the base material. Analysis revealed that the wafers’ physical properties were noticeably diverse, mainly depending on the producer. High Voltage PCSSs were fabricated in both vertical and lateral geometry with various contacts, ohmic (Ti/Al/Ni/Au or Ni/Au), with and without a conductive n-GaN or p-type layer grown by metal-organic chemical vapor deposition. Inductively coupled plasma (ICP) reactive ion etching (RIE) was used to form a mesa structure to reduce field enhancements allowing for a higher field to be applied before electrical breakdown. The length of the active region was also varied from a 3 mm gap spacing to a 600 µm gap spacing. The shorter gap spacing supports higher electric fields since the number of macro defects within the device’s active region is reduced. Such defects are common in hydride vapor phase epitaxy grown samples and are likely one of the chief causes for electrical breakdown at field levels below the bulk breakdown field of GaN. Finally, the switching behavior of PCSS devices was tested using a pulsed, high voltage testbed and triggered by an Nd:YAG laser. The best GaN PCSS fabricated using a 600 µm gap spacing, and a mesa structure demonstrated a breakdown field strength as high as ~260 kV/cm.


Plasma ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 239-251
Author(s):  
Masaomi Sanekata ◽  
Hiroshi Nishida ◽  
Tatsuya Watabe ◽  
Yuki Nakagomi ◽  
Yoshihiro Hirai ◽  
...  

Delayed discharges due to electrical breakdown are observed in modulated pulsed pow er magnetron sputtering (MPPMS) plasma of titanium. The delayed discharge, which is remarkable with decreasing argon gas pressure, transforms the discharge current waveform from a standard modulated pulsed discharge current waveform to a comb-like discharge current waveform consisting of several pulses with high power. In addition, the delay times, consisting of statistical times and formative times in the delayed MPPMS discharges, are experimentally measured with the help of Laue plot analysis. The pressure dependence of delay times observed indicates that the delayed discharge behavior matches the breakdown characteristics well. In the present study, the delayed discharge dynamics of the comb-like discharge current waveform, which can be the origin of deep oscillation magnetron sputtering, are investigated based on measurement of the delay times and the characteristics of discharge current waveforms.


Author(s):  
Xiaohua Zhu ◽  
Yunxu Luo ◽  
Weiji Liu ◽  
Ling He ◽  
Rui Gao ◽  
...  

2009 ◽  
Author(s):  
Matthias Kollosche ◽  
Michael Melzer ◽  
Andre Becker ◽  
Hristian Stoyanov ◽  
Denis N. McCarthy ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document