Community of Practice Software Management Tools

2011 ◽  
pp. 112-129 ◽  
Author(s):  
Mark Jewell ◽  
Derek H.T. Walker
Keyword(s):  
Community Of Practice ◽  
Performance Measures ◽  
Collaborative Study ◽  
Software Tool ◽  
Research Proposal ◽  
Management Approach ◽  
Anecdotal Evidence ◽  
Management Tools ◽  
The Uk

This chapter provides insights from a large UK construction organisation case study where communities of practice have been supported through use of a software tool and management approach that encourages their spread across the organisation. We provide a descriptive characterisation of what the community of practice (COP) software tool does, how it evolved, and anecdotal evidence from interviews with its users of its value to the UK case study organisation. We recognise the need to investigate COP value generation more formally, and we have developed a research proposal to undertake further work in a collaborative study with industry to provide useful COP performance measures to be undertaken. This chapter provides valuable insights from several years’ reflection upon the tool’s use and application, and we highlight both drivers and barriers to its deployment. The objective was to provide a practical example of what COP management tools could and should address.

scholarly journals Study protocol for a national retrospective review of femoral periprosthetic fracture management. Is there variation in practice?

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Ahmed A H Nasser ◽  
Govind Chauhan ◽  
Khabab Osman ◽  
Saroop Nandra ◽  
Rajpal Nandra ◽  
...  
Keyword(s):  
Health Care Services ◽  
Collaborative Study ◽  
Research Network ◽  
Coefficient Of Determination ◽  
Management Approach ◽  
True Incidence ◽  
Care Services ◽  
Effective Treatment Modality ◽  
Fracture Management ◽  
The Uk

Abstract Introduction The incidence of femoral periprosthetic fractures (PPFs) in the UK is on the rise. This rising incidence presents a clinical and an economic burden on the national health care services. There is also uncertainty about the most effective treatment modality for femoral PPFs, as well as a lack of evidence for a standardized management approach. We aimed to identify the true incidence and any variation in the management of femoral PPFs nationally. Methods and analysis This multicentre national collaborative study has been designed by a trainee led research network in collaboration with a well-established university research organization. Data will be collected from participating centres over a period of 10 years (2010–2019). All adults presenting with a femoral PPF will be identified, and the mode of treatment for each fracture subtype will be recorded. Other measures will evaluate patient and treatment variables, objective and subjective outcome measures. Univariate and multivariate regression analyses will be used, as well as the coefficient of determination (R) in an attempt to measure the degree to which the models could explain the variation in management. Ethics and dissemination This multicentre national project was approved by the local clinical governance department at each participating hospital site. The results of this study will be submitted to international peer reviewed journals and appropriate national and international conferences.

scholarly journals Automated conflict resolution between multiple clinical pathways: a technology report

2018 ◽  
Vol 25 (3) ◽  
pp. 142-148 ◽  
Author(s):  
Ian Litchfield ◽  
Alice Turner ◽  
Ruth Backman ◽  
João Bosco Ferreira Filho ◽  
Phil Weber ◽  
...  
Keyword(s):  
Secondary Care ◽  
Fundamental Problem ◽  
Clinical Pathways ◽  
Software Tool ◽  
Care Pathways ◽  
Long Term Conditions ◽  
Type Method ◽  
The Uk

BackgroundThe number of people in the UK with three or more long-term conditions continues to grow and the management of patients with co-morbidities is complex. In treating patients with multimorbidities, a fundamental problem is understanding and detecting points of conflict between different guidelines which to date has relied on individual clinicians collating disparate information.ObjectiveWe will develop a framework for modelling a diverse set of care pathways, and investigate how conflicts can be detected and resolved automatically. We will use this knowledge to develop a software tool for use by clinicians that can map guidelines, highlight root causes of conflict between these guidelines and suggest ways they might be resolved.MethodOur work consists of three phases. First, we will accurately model clinical pathways for six of the most common chronic diseases; second, we will automatically identify and detect sources of conflict across the pathways and how they might be resolved. Third, we will present a case study to prove the validity of our approach using a team of clinicians to detect and resolve the conflicts in the treatment of a fictional patient with multiple common morbidities and compare their findings and recommendations with those derived automatically using our novel software.DiscussionThis paper describes the development of an important software-based method for identifying a conflict between clinical guidelines. Our findings will support clinicians treating patients with multimorbidity in both primary and secondary care settings.

Using Copac data to benchmark collections

2016 ◽  
Vol 17 (2) ◽  
pp. 194-202 ◽  
Author(s):  
Ruth Elder ◽  
Diana Massam
Keyword(s):  
Support Service ◽  
Collection Management ◽  
Management Support ◽  
Collections Management ◽  
Management Tools ◽  
Content Type ◽  
Research Libraries ◽  
The Uk ◽  
Uk Higher Education

Purpose – The Copac Collections Management (CCM) project has been underway since 2011 with the goal of exploring how Copac can make a real difference for collection managers. By making Copac data work harder and building prototype collection analysis features on its extensive database, the collections management tools can provide valuable information from the catalogues of the UK’s major research libraries. The paper aims to discuss these issues. Design/methodology/approach – Developed to support staff in collection management activities the CCM tools offer a web-based collection management support service. It is a “grass roots” project designed to meet the needs of library practitioners and its development has been a community-based collaboration with extensive design input, consultation, feedback and support from the wider library community. Findings – This paper presents a case study showing how the tools are now embedded into “business as usual” at the University of York library. The case study reflects on how York is using the tools to assist: identify collection strengths and contribute to the identification of “unique and distinctive collections”; identify collection gaps and produce lists of potential titles for purchase; inform stock editing policies; review and prioritize work on “hidden collections”. The paper outlines the benefits of using the tools and considers lessons learnt. Originality/value – The paper offers an overall view of the tools and the potential uses by the UK higher education community. The case study will be of interest to libraries in exploring new ways to approach collection management issues, with a view to making efficient use of available resources.

Neither Victors nor Victims

2017 ◽  
Author(s):  
David Whetham
Keyword(s):  
First Century ◽  
National Interests ◽  
Civil Military Relations ◽  
High Street ◽  
National Survival ◽  
The Uk ◽  
Military Relations ◽  
The Cost ◽  
Realistic Goal

Between 2007 and 2011, Wootton Bassett, a small Wiltshire town in the UK, became the focus of national attention as its residents responded to the regular repatriations of dead soldiers through its High Street. The town’s response came to symbolize the way that broader attitudes developed and changed over that period. As such, it is a fascinating case study in civil–military relations in the twenty-first century. Success may be the same as victory, but victory, at least as it has been traditionally understood, is not a realistic goal in many types of contemporary conflict. Discretionary wars—conflicts in which national survival is not an issue and even vital national interests may not be at stake—pose particular challenges for any government which does not explain why the cost being paid in blood and treasure is ‘worth it’.

The political economy of and practical policies for inclusive growth—a case study of Scotland

2020 ◽  
Author(s):  
Donald Houston ◽  
Georgiana Varna ◽  
Iain Docherty
Keyword(s):  
Political Economy ◽  
Policy Development ◽  
Regional Governance ◽  
Community Empowerment ◽  
Inclusive Growth ◽  
Key Policy ◽  
Inclusive Governance ◽  
The Uk ◽  
Civic Institutions

Abstract The concept of ‘inclusive growth’ (IG) is discussed in a political economy framework. The article reports comparative analysis of economic and planning policy documents from Scotland, England and the UK and findings from expert workshops held in Scotland, which identify four key policy areas for ‘inclusive growth’: skills, transport and housing for young people; city-regional governance; childcare; and place-making. These policies share with the ‘Foundational Economy’ an emphasis on everyday infrastructure and services, but add an emphasis on inter-generational justice and stress the importance of community empowerment as much as re-municipalisation. Factors enabling IG policy development include: the necessary political powers; a unifying political discourse and civic institutions; and inclusive governance and participatory democracy.

scholarly journals Rain Erosion Maps for Wind Turbines Based on Geographical Locations: A Case Study in Ireland and Britain

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
K. Pugh ◽  
M. M. Stack
Keyword(s):  
Wind Turbine ◽  
Western Europe ◽  
Meteorological Data ◽  
Turbine Blades ◽  
Weather Conditions ◽  
Annual Rainfall ◽  
Wind Turbine Blades ◽  
Weather Patterns ◽  
The Uk

AbstractErosion rates of wind turbine blades are not constant, and they depend on many external factors including meteorological differences relating to global weather patterns. In order to track the degradation of the turbine blades, it is important to analyse the distribution and change in weather conditions across the country. This case study addresses rainfall in Western Europe using the UK and Ireland data to create a relationship between the erosion rate of wind turbine blades and rainfall for both countries. In order to match the appropriate erosion data to the meteorological data, 2 months of the annual rainfall were chosen, and the differences were analysed. The month of highest rain, January and month of least rain, May were selected for the study. The two variables were then combined with other data including hailstorm events and locations of wind turbine farms to create a general overview of erosion with relation to wind turbine blades.

scholarly journals Protocol for establishing an Adaptive Diseases control Expert Programme in Tanzania (ADEPT) for integrating care of communicable and non-communicable diseases using tuberculosis and diabetes as a case study

BMJ Open ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. e041521
Author(s):  
Stellah G Mpagama ◽  
Kaushik Ramaiya ◽  
Troels Lillebæk ◽  
Blandina T Mmbaga ◽  
Marion Sumari-de Boer ◽  
...  
Keyword(s):  
Operational Research ◽  
Communicable Diseases ◽  
Health Facilities ◽  
Learning System ◽  
Management Approach ◽  
African Countries ◽  
Non Communicable Diseases ◽  
Research Outcomes ◽  
The Government

IntroductionMost sub-Saharan African countries endure a high burden of communicable infections but also face a rise of non-communicable diseases (NCDs). Interventions targeting particular epidemics are often executed within vertical programmes. We establish an Adaptive Diseases control Expert Programme in Tanzania (ADEPT) model with three domains; stepwise training approach, integration of communicable and NCDs and a learning system. The model aims to shift traditional vertical programmes to an adaptive diseases management approach through integrating communicable and NCDs using the tuberculosis (TB) and diabetes mellitus (DM) dual epidemic as a case study. We aim to describe the ADEPT protocol with underpinned implementation and operational research on TB/DM.Methods and analysisThe model implement a collaborative TB and DM services protocol as endorsed by WHO in Tanzania. Evaluation of the process and outcomes will follow the logic framework. A mixed research design with both qualitative and quantitative approaches will be used in applied research action. Anticipated implementation research outcomes include at the health facilities level for organising TB/DM services, pathways of patients with TB/DM seeking care in different health facilities, factors in service delivery that need deimplementation and the ADEPT model implementation feasibility, acceptability and fidelity. Expected operational research outcomes include additional identified patients with dual TB/DM, the prevalence of comorbidities like hypertension in patients with TB/DM and final treatment outcomes of TB/DM including treatment-related complications. Findings will inform the future policies and practices for integrating communicable and NCDs services.Ethics and disseminationEthical approval was granted by The National Research Health Ethical Committee (Ref-No. NIMR/HQ/R.8a/Vol.IX/2988) and the implementation endorsed by the government authorities. Findings will be proactively disseminated through multiple mechanisms including peer-reviewed journals, and engagement with various stakeholders’ example in conferences and social media.

scholarly journals Rapid, remote and responsive research during COVID-19

2021 ◽  
Vol 14 (1) ◽  
pp. 205979912110085
Author(s):  
Jane Richardson ◽  
Barry Godfrey ◽  
Sandra Walklate
Keyword(s):  
Criminal Justice ◽  
Social Science ◽  
Health Research ◽  
Applied Research ◽  
Data Gathering ◽  
Policy And Practice ◽  
Research And Innovation ◽  
The Uk ◽  
Practical Recommendations

In March 2020, the UK Research and Innovation announced an emergency call for research to inform policy and practice responses to the COVID-19 pandemic. This call implicitly and explicitly required researchers to work rapidly, remotely and responsively. In this article, we briefly review how rapid response methods developed in health research can be used in other social science fields. After outlining the literature in this area, we use the early stages of our applied research into criminal justice responses to domestic abuse during COVID-19 as a case study to illustrate some of the practical challenges we faced in responding to this rapid funding call. We review our use of and experience with remote research methods and describe how we used and adapted these methods in our research, from data gathering through to transcription and analysis. We reflect on our experiences to date of what it means to be responsive in fast-changing research situations. Finally, we make some practical recommendations for conducting applied research in a ‘nimble’ way to meet the demands of working rapidly, remotely, responsively and, most importantly, responsibly.

Failure mode and effect analysis (FMEA) to improve collaborative project-based learning: Case study of a Study and Research Path in mechanical engineering

2021 ◽  
pp. 030641902199904
Author(s):  
Elena Bartolomé ◽  
Paula Benítez
Keyword(s):  
Active Learning ◽  
Failure Mode ◽  
Mechanical Engineering ◽  
Failure Modes ◽  
Collaborative Study ◽  
Project Based Learning ◽  
Educational Process ◽  
Effect Analysis ◽  
Questions And Answers

Failure Mode and Effect Analysis (FMEA) is a powerful quality tool, widely used in industry, for the identification of failure modes, their effects and causes. In this work, we investigated the utility of FMEA in the education field to improve active learning processes. In our case study, the FMEA principles were adapted to assess the risk of failures in a Mechanical Engineering course on “Theory of Machines and Mechanisms” conducted through a project-based, collaborative “Study and Research Path (SRP)” methodology. The SRP is an active learning instruction format which is initiated by a generating question that leads to a sequence of derived questions and answers, and combines moments of study and inquiry. By applying the FMEA, the teaching team was able to identify the most critical failures of the process, and implement corrective actions to improve the SRP in the subsequent year. Thus, our work shows that FMEA represents a simple tool of risk assesment which can serve to identify criticality in educational process, and improve the quality of active learning.

Sign in / Sign up

Export Citation Format

Share Document