Elasto-Plastic Analysis Method for Vertically Loaded Pile Considering Pile-Soil Slip

2011 ◽  
Vol 105-107 ◽  
pp. 1567-1571
Author(s):  
Wen Juan Yao ◽  
Shang Ping Chen ◽  
Sheng Qing Zhu
Keyword(s):  
Elasticity Theory ◽  
Relative Displacement ◽  
Hyperbolic Function ◽  
Theory Method ◽  
Analysis Method ◽  
Systematic Analysis ◽  
Testing Data ◽  
Pile Settlement ◽  
The Relationship ◽  
Soil Interface

The calculation and analysis of single pile settlement was one of the important geotechnical engineering issues, and many geotechnical engineers and scholars investigated and formed a systematic analysis method. Among the existing methods of analysis methods, the elasticity theory method was relatively mature. However, the traditional elasticity theory method could not consider the slip properties between pile and soil, and did not match the actual working properties of pile foundation. In this paper, based on Mindlin's solution, the pile is assumed to be elastic and the relationship between shear stress and relative displacement at the pile-soil interface is assumed to follow hyperbolic function, then series equations were derived and solved by Finite Difference Method. Two cases were demonstrated and the computed results agreed very well with testing data. The advantage of the analysis method proposed was that the interaction of pile and pile, and pile and soil can be considered.

scholarly journals Study on the Design of Luxury Exhibition Space Based on Narrative Theory

2021 ◽  
Vol 236 ◽  
pp. 05060
Author(s):  
Liu Ke ◽  
Liu Xiaodong
Keyword(s):  
Interdisciplinary Research ◽  
Research Method ◽  
Narrative Theory ◽  
Emotional Communication ◽  
Luxury Brands ◽  
Analysis Method ◽  
Systematic Analysis ◽  
Exhibition Space ◽  
Spatial Narrative ◽  
The Relationship

This thesis will take the narrative theory as the foundation, analyzing the narrative method of luxury display space. The author adopts the literature research method, systematic analysis method, and interdisciplinary research method to study the luxury display space. By discussing the relationship between the narrative theory and luxury exhibition space, and combining with the cases of luxury brand exhibition space, this paper explores how to apply the narrative theory to the design of luxury exhibition space. Re-examining the spatial narrative from an interdisciplinary perspective is not only conducive to the emotional communication between brands and consumers, but also conducive to the value construction and promotion of luxury brands.

Analysis on the Characteristics of Pile Skin Friction under the Displacement Interactions between Pile and Soil around

2011 ◽  
Vol 94-96 ◽  
pp. 1858-1863
Author(s):  
Pei Yuan Lin ◽  
Lian Sheng Tang ◽  
Qing Feng Ding
Keyword(s):  
Skin Friction ◽  
Relative Displacement ◽  
Linear Increase ◽  
Distribution Law ◽  
Difference Function ◽  
Testing Data ◽  
Three Stages ◽  
Friction Pile ◽  
The Relationship ◽  
Nonlinear Increase

On the basis of analyzing the occurring mechanism of pile skin friction, pile-soil relative displacement difference function is introduced, and the differential equation which depicts the relationship between pile skin friction and depth is derived, then the calculating model of pile skin friction with depth is established under considering the displacement-interaction process. Field monitoring data are employed to verify the rationality and validity of the model proposed. Through the established model, influences, exerted by pile-soil relative displacement difference, on the pile skin friction distribution are discussed and divided into three stages: I. stage of linear increase; II. stage of nonlinear increase; III. stage of convergence. Filed testing data comparing and theoretical analysis results indicate that the method proposed can describe the transferring process as well as the distribution law of pile skin friction under taking the pile-soil interaction into account, the parameters related and needed can be easily obtained, and the model suggested in this paper is of value in pile theory and engineering.

ÖRGÜTLERDE ÖRGÜTSEL BOLLUĞUN GİRİŞİMSEL ORYANTASYON ÜZERİNDEKİ ETKİSİ

2016 ◽  
Vol 4 (3) ◽  
Author(s):  
Nurdan Gürkan ◽  
Ahmet Ferda Çakmak
Keyword(s):  
Corporate Governance ◽  
Data Analysis ◽  
Panel Data ◽  
Strategic Management ◽  
Significant Relationship ◽  
Entrepreneurial Orientation ◽  
Panel Data Analysis ◽  
Organizational Slack ◽  
Analysis Method ◽  
The Relationship

The concept of entrepreneurial orientation, which emerges with the development of strategic management, refers to entrepreneurship orientations of businesses. The businesses need resources in other words organizational slack in order to develop their entrepreneurial trends. The organizational slack consists of three slack type. These slack types are available slack, recoverable slack and potential slack. The purpose of this study is to examine whether organizational slack in the businesses has an effect on entrepreneurial orientation. The relationship between organizational slack and entrepreneurial orientation was investigated through 20 companies that were traded in Borsa Istanbul Corporate Governance Index for 2010-2014 period using panel data analysis method. The results of the study indicate the existence of a statistically significant relationship between and the available slack and the recoverable slack with the entrepreneurial orientation in the businesses. According to findings; there was no statistically significant relationship between potential slack and entrepreneurial orientation.

PENGARUH KUALITAS PRODUK DAN KUALITAS PELAYANAN TERHADAP PENINGKATAN KEPUASAN DAN LOYALITAS PELANGGAN PERUSAHAAN DAERAH AIR MINUM (PDAM) KOTA MAKASSAR

2019 ◽  
Vol 3 (2) ◽  
pp. 228-244 ◽  
Author(s):  
Muhammad Rezha Pahlawan ◽  
Nurlia Nurlia ◽  
Abdul Rahman Laba ◽  
Erlina Pakki ◽  
Hardiyono Hardiyono
Keyword(s):  
Customer Satisfaction ◽  
Service Quality ◽  
Product Quality ◽  
Customer Loyalty ◽  
Indirect Effects ◽  
Analysis Method ◽  
Water Company ◽  
The Relationship ◽  
Intervening Variables ◽  
Customer Satisfaction And Loyalty

This study aims to determine the effect of Product Quality and Service Quality on Increasing Customer Satisfaction and Loyalty in Makassar Municipal Water Company (PDAM) both directly and through intervening variables or indirect effects. This study uses a quantitative approach conducted with the aim to explain the position of the variables studied and the relationship between one variable with another variable. This research will explain the causal relationship between variables through hypothesis testing. In this study, the analysis method used is path analysis using the SmartPLS program. The results of this study found that directly the product quality had a positive and significant effect on customer satisfaction, service quality had a positive and significant effect on customer satisfaction, product quality had a positive and significant effect on customer loyalty, service quality had a positive and not significant effect on customer loyalty, customer satisfaction positive and significant effect on customer loyalty. The indirect effect of this research is product quality has a positive and significant effect on customer loyalty if mediated by customer satisfaction. Service quality also has a positive and significant effect on customer loyalty if mediated by customer satisfaction.

Optimization of Pan Coating Process for Increased Efficiency of Controlled-Release Urea Fertilizer

2021 ◽  
Vol 57 (4) ◽  
pp. 333-342
Author(s):  
Trung Huu Nguyen ◽  
Tran Nguyen Minh An ◽  
Mahboob Alam ◽  
Duc Hoai Tran ◽  
Nghi Tran ◽  
...  
Keyword(s):  
Controlled Release ◽  
Layer Thickness ◽  
Release Time ◽  
Coating Process ◽  
Analysis Method ◽  
Sauter Mean Diameter ◽  
Urea Fertilizer ◽  
The Relationship ◽  
Central Composite ◽  
Controlled Release Urea

The goal of the research is to develop an experimental mathematical model of pan coating process effect on the biodegradable polymer and to determine optimal process parameters. The polymer solution was conducted with phosphated di-starch phosphate, polyvinyl alcohol, and polyacrylic acid and performed as material coating for the controlled-release urea fertilizer. The image analysis method has been used to determine the particle size distribution, Sauter mean diameter of the particle and layer thickness that is novel. The central composite rotatable design has been selected to determine the regression models of the process, which described the relationship between two objective variables as layer thickness, release time with angle of pan, spray flow, and coating time. The statistical analysis results indicate the fitness of model.

Roller–rail parameters on the transverse vibration characteristics of super-high-speed elevators

2019 ◽  
Vol 43 (4) ◽  
pp. 535-543 ◽  
Author(s):  
Shunxin Cao ◽  
Ruijun Zhang ◽  
Shuohua Zhang ◽  
Shuai Qiao ◽  
Dongsheng Cong ◽  
...  
Keyword(s):  
High Speed ◽  
Relative Displacement ◽  
Guide Rail ◽  
Coupled Vibration ◽  
Vibration Acceleration ◽  
Vibration Model ◽  
Vibration Problems ◽  
Equivalent Method ◽  
Relationship Of ◽  
The Relationship

Interaction and wear between wheel and rail become increasingly serious with the increase in elevator speed and load. Uneven roller surface, eccentricity of rollers, and the looseness of rail brackets result in serious vibration problems of high-speed and super-high-speed elevators. Therefore, the forced vibration differential equation representing elevator guide rails is established based on Bernoulli–Euler theory, and the vibration equation of the elevator guide shoes and the car is constructed using the Darren Bell principle. Then, the coupled vibration model of guide rail, guide shoes, and car can be obtained using the relationship of force and relative displacement among these components. The roller–rail parameters are introduced into the established coupled vibration model using the model equivalent method. Then, the influence of roller–rail parameters on the horizontal vibration of super-high-speed elevator cars is investigated. Roller eccentricity and the vibration acceleration of the car present a linear correlation, with the amplitude of the car vibration acceleration increasing with the eccentricity of the roller. A nonlinear relationship exists between the surface roughness of the roller and the vibration acceleration of the car. Increased continuous loosening of the guide rail results in severe vibration of the car at the loose position of the support.

Evidential Study of Relationship between Flexible Drift of Fuel Nozzle Performance and Hot-End Failure of X Engine

2014 ◽  
Vol 651-653 ◽  
pp. 724-728
Author(s):  
Yong Gang Xu ◽  
Qiang Wang
Keyword(s):  
Abrupt Change ◽  
Initial Period ◽  
Flow Property ◽  
Analysis Method ◽  
Comparison Analysis ◽  
Fuel Nozzle ◽  
Converging Flow ◽  
The Relationship ◽  
Relative Scarcity ◽  
Engine Start

By means of the fountain-convergence analysis method of FRRU (Flow Resistance-Rigidity Uniformity) index defined by the author, evidential comparison analysis study has been made to the relationship between flexible drift of flow performance of WTD (Weight Type Distributor) valves of fuel nozzles of X engine and hot-end failures of X engine. The results show that during the initial period of engine start, because of the relative scarcity of air in the combustor, a convergence characteristic, due to its converging flow property ofmultiple to one, can lead to such hot-end failures as turbine blade fusion break which is characterized byabrupt change, while a fountain characteristic, due to its diffusing flow property ofone tomultiple, cannot result in any hot-end failures.

scholarly journals Single, context-specific glycans can target misfolded glycoproteins for ER-associated degradation

2005 ◽  
Vol 169 (1) ◽  
pp. 73-82 ◽  
Author(s):  
Eric D. Spear ◽  
Davis T.W. Ng
Keyword(s):  
Quality Control ◽  
Endoplasmic Reticulum ◽  
Secretory Protein ◽  
Carboxypeptidase Y ◽  
Er Quality Control ◽  
Systematic Analysis ◽  
Proteinase A ◽  
Context Specific ◽  
The Relationship ◽  
Erad Pathway

The endoplasmic reticulum (ER) maintains an environment essential for secretory protein folding. Consequently, the premature transport of polypeptides would be harmful to the cell. To avert this scenario, mechanisms collectively termed “ER quality control” prevent the transport of nascent polypeptides until they properly fold. Irreversibly misfolded molecules are sorted for disposal by the ER-associated degradation (ERAD) pathway. To better understand the relationship between quality control and ERAD, we studied a new misfolded variant of carboxypeptidase Y (CPY). The molecule was recognized and retained by ER quality control but failed to enter the ERAD pathway. Systematic analysis revealed that a single, specific N-linked glycan of CPY was required for sorting into the pathway. The determinant is dependent on the putative lectin-like receptor Htm1/Mnl1p. The discovery of a similar signal in misfolded proteinase A supported the generality of the mechanism. These studies show that specific signals embedded in glycoproteins can direct their degradation if they fail to fold.

scholarly journals THE DEVELOPMENT OF THE QUALITY MANAGEMENT SYSTEM IN TERMS OF KNOWLEDGE MANAGEMENT / KOKYBĖS VADYBOS SISTEMŲ TOBULINIMAS ŽINIŲ VADYBOS ASPEKTU

2011 ◽  
Vol 3 (4) ◽  
pp. 113-119
Author(s):  
Romualdas Vitkauskas
Keyword(s):  
Knowledge Management ◽  
Quality Management ◽  
Quality Management System ◽  
Analysis Method ◽  
Continual Improvement ◽  
Correlation Analysis Method ◽  
Product And Process ◽  
Quality Of Products ◽  
The Relationship

The interaction of quality management and knowledge man­agement are analyzed quite widely in scientific literature and discussed with reference to various models integrating these two management theories. However, there are not enough precise tools that could provide a possibility of improving the quality of products and services through knowledge management. To this end, the article examines the already existing models for the interaction between quality management and knowledge management. The results of a survey on Lithuanian industry show what organizational knowledge is the most important while implementing quality management principles aimed at improving quality. The correlation analysis method showed the relationship between quality management principles (process approach, continual improvement, management, facts) and the factors defining the product and process quality (the extent of determining process execution time, process resources, costs of process stages, indicators for products and/or services, the dura­tion of the process, the extent of measuring indicators, the extent of collecting information on indicators, the extent of collecting information about the costs of the process). Santrauka Kokybės vadybos ir žinių vadybos sąveika mokslinėje literatūroje analizuojama gana plačiai, aptariami įvairūs sąveikos modeliai integruojant šias dvi vadybos teorijas. Tačiau nepakankamai nagrinėjamos konkrečios priemonės, kuriomis būtų galima pagerinti produktų ir paslaugų kokybę pasitelkiant žinių vadybą. Tuo tikslu straipsnyje analizuojami jau egzis­tuojantys kokybės vadybos ir žinių vadybos sąveikos modeliai bei pateikiami Lietuvos pramonės įmonių tyrimo rezultatai, parodantys, kokios organizacinės žinios svarbiausios įgyvendinant kokybės vadybos principus, skirtus kokybei gerinti. Taikant koreliacinės analizės metodą nustatyta, kad egzistuoja ryšys tarp kokybės vadybos principų (procesinio požiūrio, nuolatinio gerinimo, valdymo remiantis faktais) įgyvendinimo lygio ir veiksnių, apibūdinančių produktų ir procesų kokybę (procesų įvykdymo laiko nustatymas, procesų išteklių nustatymas, procesų etapų išlaidų nustatymas, produktų ir (ar) paslaugų rodiklių nustatymas, rodiklių matavimas, rodiklių informacijos rinkimas, informacijos apie proceso trukmę nustatymas ir informacijos apie proceso išlaidas rinkimas).

scholarly journals Mechanics of the small punch test: a review and qualification of additive manufacturing materials

2021 ◽  
Vol 56 (18) ◽  
pp. 10707-10744
Author(s):  
Jonathan Torres ◽  
Ali P. Gordon
Keyword(s):  
Additive Manufacturing ◽  
Material Properties ◽  
Materials Science ◽  
Contemporary Literature ◽  
The Body ◽  
Small Punch Test ◽  
Small Punch ◽  
Punch Test ◽  
Testing Data ◽  
The Relationship

AbstractThe small punch test (SPT) was developed for situations where source material is scarce, costly or otherwise difficult to acquire, and has been used for assessing components with variable, location-dependent material properties. Although lacking standardization, the SPT has been employed to assess material properties and verified using traditional testing. Several methods exist for equating SPT results with traditional stress–strain data. There are, however, areas of weakness, such as fracture and fatigue approaches. This document outlines the history and methodologies of SPT, reviewing the body of contemporary literature and presenting relevant findings and formulations for correlating SPT results with conventional tests. Analysis of literature is extended to evaluating the suitability of the SPT for use with additively manufactured (AM) materials. The suitability of this approach is shown through a parametric study using an approximation of the SPT via FEA, varying material properties as would be seen with varying AM process parameters. Equations describing the relationship between SPT results and conventional testing data are presented. Correlation constants dictating these relationships are determined using an accumulation of data from the literature reviewed here, along with novel experimental data. This includes AM materials to assess the fit of these and provide context for a wider view of the methodology and its interest to materials science and additive manufacturing. A case is made for the continued development of the small punch test, identifying strengths and knowledge gaps, showing need for standardization of this simple yet highly versatile method for expediting studies of material properties and optimization.

Sign in / Sign up

Export Citation Format

Share Document