Sensitivity of Modeling in Sheet Metal Three-Point Cyclic Bending

2012 ◽  
Vol 165 ◽  
pp. 187-191
Author(s):  
M.R. Jamli ◽  
Ahmad Kamal Ariffin ◽  
D.A. Wahab ◽  
A.E. Ismail ◽  
I.A. Shah
Keyword(s):  
Sheet Metal ◽  
Computation Time ◽  
Shell Element ◽  
Bending Test ◽  
Three Point Bending ◽  
Integration Point ◽  
Mesh Density ◽  
Explicit Procedure ◽  
Element Type ◽  
Implicit And Explicit

The aim of this paper is to examine the modeling sensitivity of the three-point bending test by using finite element method (FEM). Three-point bending test has been frequently used to determine the material hardening parameters of sheet metal. As a part of the parameter identification, three-point bending has been simulated and analyzed using FEM. To minimize the computation time, shell element was used to model the sheet metal. The analysis includes implicit and explicit procedures. In particular, this study examines the effect of FEM results by varying the element type, mesh density, and number of integration point. It is shown that the implicit procedure analyze the simulation with very less computation time compared to the explicit procedure. The results also show that only the number of integration point has significant effect on the simulation in both implicit and explicit procedures.

scholarly journals Additive Manufacturing-Based In Situ Consolidation of Continuous Carbon Fibre-Reinforced Polycarbonate

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2450
Author(s):  
Andreas Borowski ◽  
Christian Vogel ◽  
Thomas Behnisch ◽  
Vinzenz Geske ◽  
Maik Gude ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Carbon Fibre ◽  
Bending Test ◽  
Thermoplastic Composites ◽  
Experimental Investigations ◽  
Material Structure ◽  
Three Point Bending ◽  
Continuous Fibre ◽  
Local Material

Continuous carbon fibre-reinforced thermoplastic composites have convincing anisotropic properties, which can be used to strengthen structural components in a local, variable and efficient way. In this study, an additive manufacturing (AM) process is introduced to fabricate in situ consolidated continuous fibre-reinforced polycarbonate. Specimens with three different nozzle temperatures were in situ consolidated and tested in a three-point bending test. Computed tomography (CT) is used for a detailed analysis of the local material structure and resulting material porosity, thus the results can be put into context with process parameters. In addition, a highly curved test structure was fabricated that demonstrates the limits of the process and dependent fibre strand folding behaviours. These experimental investigations present the potential and the challenges of additive manufacturing-based in situ consolidated continuous fibre-reinforced polycarbonate.

Effect of Concrete Mixture Composition on Acoustic Emission and Fracture Parameters Obtained from Three-Point Bending Test

2015 ◽  
Vol 1100 ◽  
pp. 152-155
Author(s):  
Libor Topolář ◽  
Hana Šimonová ◽  
Petr Misák
Keyword(s):  
Acoustic Emission ◽  
Bending Test ◽  
Mixture Composition ◽  
Three Point Bending ◽  
Concrete Mixtures ◽  
Fracture Parameters ◽  
Fracture Tests ◽  
Stress Behaviour ◽  
Bending Fracture ◽  
Fracture Processes

This paper reports the analysis of acoustic emission signals captured during three-point bending fracture tests of concrete specimens with different mixture composition. Acoustic emission is an experimental tool well suited for monitoring fracture processes in material. The typical acoustic emission patterns were identified in the acoustic emission records for three different concrete mixtures to further describe the under-the-stress behaviour and failure development. An understanding of microstructure–performance relationships is the key to true understanding of material behaviour. The acoustic emission results are accompanied by fracture parameters determined via evaluation of load versus deflection diagrams recorded during three-point bending fracture tests.

scholarly journals Experimental and Numerical simulation of a Three Point Bending Test of a Stainless Steel Beam

2021 ◽  
Vol 55 ◽  
pp. 1114-1121
Author(s):  
Daniel Jindra ◽  
Zdeněk Kala ◽  
Jiří Kala ◽  
Stanislav Seitl
Keyword(s):  
Numerical Simulation ◽  
Stainless Steel ◽  
Bending Test ◽  
Steel Beam ◽  
Three Point Bending

scholarly journals Fracture and Size Effect of PFRC Specimens Simulated by Using a Trilinear Softening Diagram: A Predictive Approach

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3795
Author(s):  
Fernando Suárez ◽  
Jaime C. Gálvez ◽  
Marcos G. Alberti ◽  
Alejandro Enfedaque
Keyword(s):  
Reinforced Concrete ◽  
Size Effect ◽  
A Priori ◽  
Plain Concrete ◽  
Specimen Size ◽  
Bending Test ◽  
Orientation Factor ◽  
Fibre Reinforced Concrete ◽  
Softening Function ◽  
Three Point Bending

The size effect on plain concrete specimens is well known and can be correctly captured when performing numerical simulations by using a well characterised softening function. Nevertheless, in the case of polyolefin-fibre-reinforced concrete (PFRC), this is not directly applicable, since using only diagram cannot capture the material behaviour on elements with different sizes due to dependence of the orientation factor of the fibres with the size of the specimen. In previous works, the use of a trilinear softening diagram proved to be very convenient for reproducing fracture of polyolefin-fibre-reinforced concrete elements, but only if it is previously adapted for each specimen size. In this work, a predictive methodology is used to reproduce fracture of polyolefin-fibre-reinforced concrete specimens of different sizes under three-point bending. Fracture is reproduced by means of a well-known embedded cohesive model, with a trilinear softening function that is defined specifically for each specimen size. The fundamental points of these softening functions are defined a priori by using empirical expressions proposed in past works, based on an extensive experimental background. Therefore, the numerical results are obtained in a predictive manner and then compared with a previous experimental campaign in which PFRC notched specimens of different sizes were tested with a three-point bending test setup, showing that this approach properly captures the size effect, although some values of the fundamental points in the trilinear diagram could be defined more accurately.

Experimental and Numerical Investigation of Critical Buckle Load of Composite Specimens

2015 ◽  
Vol 732 ◽  
pp. 85-90
Author(s):  
Lukáš Bek ◽  
Radek Kottner ◽  
Jan Krystek ◽  
Tomáš Kroupa
Keyword(s):  
Static Analysis ◽  
Glass Fibre ◽  
Large Deformations ◽  
Bending Test ◽  
Test Results ◽  
Beam Test ◽  
Three Point Bending ◽  
Box Beams ◽  
Buckle Beam ◽  
Thin Walled

Different carbon and glass fibre strips were subjected to the double clamp buckle beam test. Furthermore, thin-walled glass fibre box-beams were subjected to the three-point bending test. Results of experiments were compared to different numerical simulations using buckling analysis or static analysis considering large deformations.

Influence of Honeycomb Core Compression on the Mechanical Properties of the Sandwich Structure

2013 ◽  
Vol 486 ◽  
pp. 283-288
Author(s):  
Ladislav Fojtl ◽  
Soňa Rusnáková ◽  
Milan Žaludek
Keyword(s):  
Mechanical Properties ◽  
Impact Test ◽  
Charpy Impact ◽  
Charpy Impact Test ◽  
Low Velocity Impact ◽  
Bending Test ◽  
Honeycomb Core ◽  
Low Velocity ◽  
Three Point Bending ◽  
Core Technology

This research paper deals with an investigation of the influence of honeycomb core compression on the mechanical properties of sandwich structures. These structures consist of prepreg facing layers and two different material types of honeycomb and are produced by modified compression molding called Crush-Core technology. Produced structures are mechanically tested in three-point bending test and subjected to low-velocity impact and Charpy impact test.

Three-Point Bending Test Evaluation of Concrete Specimens by Non-Traditional Analysis of Acoustic Emission Method

2016 ◽  
Vol 837 ◽  
pp. 198-202
Author(s):  
Luboš Pazdera ◽  
Libor Topolář ◽  
Tomáš Vymazal ◽  
Petr Daněk ◽  
Jaroslav Smutny
Keyword(s):  
Acoustic Emission ◽  
Signal Analysis ◽  
Measurement Data ◽  
Bending Test ◽  
Test Evaluation ◽  
Acoustic Emission Method ◽  
Emission Method ◽  
Three Point Bending ◽  
Time Frequency ◽  
Emission Signal

The aim of the paper is focused on the analysis of the mechanical properties of the concrete specimens with plasticizer at three point bending test by the signal analysis of the acoustic emission signal. The evaluations were compared the measurement and the results obtained with theoretical presumptions. The Joint Time Frequency Analysis applied on measurement data and its evaluation is described. It is well known that the Acoustic Emission Method is a very sensitive method to determine active cracks into structure. However, evaluation of acoustic emission signals is very difficult. A non-traditional method was used to signal analysis of burst acoustic emission signals recorded during three point bending test.

Three-point bending test parameters for dental materials evaluation

2012 ◽  
Vol 28 ◽  
pp. e2-e3
Author(s):  
B.C.F. Barreto ◽  
L.H.A. Raposo ◽  
S.J.B. Sousa ◽  
A.G. Pereira ◽  
A. Versluis ◽  
...  
Keyword(s):  
Dental Materials ◽  
Bending Test ◽  
Three Point Bending ◽  
Test Parameters

High Temperature Storage and Gamma Radiation Effects on Mechanical Properties of Stacked Die Package

2014 ◽  
Vol 895 ◽  
pp. 567-570
Author(s):  
Azman Jalar ◽  
Wan Yusmawati Wan Yusoff ◽  
Norinsan Kamil Othman ◽  
Irman Abdul Rahman
Keyword(s):  
High Temperature ◽  
Gamma Radiation ◽  
Radiation Effects ◽  
Storage Period ◽  
Bending Test ◽  
Three Point Bending ◽  
Micromechanical Properties ◽  
3D Ct Scan ◽  
High Temperature Storage ◽  
Temperature Storage

Effect of gamma radiation (1.33 MeV) and high temperature storage of semiconductor package towards micromechanical properties has been investigated. The in-house fabricated Quad Flat No Lead was exposed to gamma radiation with the dose of 5 Gy. Afterwards, high temperature storage was performed at 150 °C for 10, 100 and 1000 hours. Subsequently, the three point bending technique was carried out to obtain the micromechanical properties of semiconductor package. The fracture of the packages caused by three point bending test was subjected to 3D CT scan to capture the image of the fracture. Irradiated package shows the decreasing in their strength with increasing doses of gamma radiation. However, the strength of the package was improved after high temperature storage for 10 hours and decreased as the storage period is extended. Further analysis exhibited that high temperature storage for 10 hours is reveal as good thermal treatment for package in radioactive environment application.

Comparison of the Cross Sectional Area, the Loss in Volume and the Mechanical Properties of LAE442 and MgCa0.8 as Resorbable Magnesium Alloy Implants after 12 Months Implantation Duration

2010 ◽  
Vol 638-642 ◽  
pp. 675-680 ◽  
Author(s):  
Martina Thomann ◽  
Nina von der Höh ◽  
Dirk Bormann ◽  
Dina Rittershaus ◽  
C. Krause ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cross Sections ◽  
Degradation Process ◽  
Cross Sectional Area ◽  
Bending Test ◽  
Sectional Area ◽  
Cross Sectional ◽  
Initial Strength ◽  
Three Point Bending ◽  
The Cross

Current research focuses on magnesium based alloys in the course of searching a resorbable osteosynthetic material which provides sufficient mechanical properties besides a good biocompatibility. Previous studies reported on a favorable biocompatibility of the alloys LAE442 and MgCa0.8. The present study compared the degradation process of cylindrical LAE442 and MgCa0.8 implants after 12 months implantation duration. Therefore, 10 extruded implants (2.5 x 25 mm, cross sectional area 4.9 mm²) of both alloys were implanted into the medullary cavity of both tibiae of rabbits for 12 months. After euthanization, the right bone-implant-compound was scanned in a µ-computed tomograph (µCT80, ScancoMedical) and nine uniformly distributed cross-sections of each implant were used to determine the residual implants´ cross sectional area (Software AxioVisionRelease 4.5, Zeiss). Left implants were taken out of the bone carefully. After weighing, a three-point bending test was carried out. LAE442 implants degraded obviously slower and more homogeneously than MgCa0.8. The mean residual cross sectional area of LAE442 implants was 4.7 ± 0.07 mm². MgCa0.8 showed an area of only 2.18 ± 1.03 mm². In contrast, the loss in volume of LAE442 pins was more obvious. They lost 64 % of their initial weight. The volume of MgCa0.8 reduced clearly to 54.4 % which corresponds to the cross sectional area results. Three point bending tests revealed that LAE442 showed a loss in strength of 71.2 % while MgCa0.8 lost 85.6 % of its initial strength. All results indicated that LAE442 implants degraded slowly, probably due to the formation of a very obvious degradation layer. Degradation of MgCa0.8 implants was far advanced.

Sign in / Sign up

Export Citation Format

Share Document