Analysis of Influence Factors and Countermeasures on the Safety of Hazardous Goods Transportation on Road

2012 ◽  
Vol 209-211 ◽  
pp. 822-826
Author(s):  
Juan Juan Hu ◽  
Xiao Duan Sun ◽  
Bing Han
Keyword(s):  
Fault Tree ◽  
Influence Factors ◽  
Management Process ◽  
Main Research ◽  
Factors Influencing

In order to improve the safety of road hazardous goods transportation and decrease the accidents, the management process of hazardous goods transportation is taken as the main research object in this paper. The fault tree is established to seek out the primary factors influencing on the hazardous goods transportation on road, and the safety proposals are presented.

Einflussfaktoren in Routenzugsystemen*/Factors influencing internal milkrun systems - A method for calculating the intensity of influence of dimensioning parameters

2015 ◽  
Vol 105 (01-02) ◽  
pp. 65-71
Author(s):  
A. Martini ◽  
A. Rohe ◽  
U. Stache ◽  
F. Trenker
Keyword(s):  
Calculation Method ◽  
Influence Factors ◽  
Factors Influencing ◽  
Rank System ◽  
Factors Of Influence ◽  
Design Options ◽  
Specific Influence

Die Komplexität bei der Planung und Optimierung von Routenzugsystemen ist auf die Vielzahl der unterschiedlichen Gestaltungsmöglichkeiten und auf Interdependenzen zwischen den Einflussfaktoren zurückzuführen. Die im Fachartikel vorgestellte Verfahrensweise zur Einflussstärkenberechnung verschiedener Dimensionierungsparameter dient der Rangfolgebildung systemspezifischer Einflussfaktoren. Durch quantitativ-explorative Untersuchungen werden zudem Hypothesen für weitere Arbeiten gewonnen.   The complexity of planning and optimizing internal milkrun systems is a consequence of the multitude of different design options and interdependencies between the factors of influence. The calculation method for measuring the influence of different dimensioning parameters presented in this article serves to rank system-specific influence factors. Hypotheses for further research are obtained via quantitative-exploratory studies.

scholarly journals Analysis of factors influencing the complications of Solitaire AB stent mechanical thrombectomy in patients with acute intracranial artery occlusion

2019 ◽  
Vol 3 (3) ◽  
Author(s):  
Xin Zong ◽  
Jingmei Li ◽  
Shugai Liu ◽  
Qiuxia Liang ◽  
Xiaojun Luo ◽  
...  
Keyword(s):  
Risk Factors ◽  
Cerebral Hemorrhage ◽  
Mechanical Thrombectomy ◽  
Influence Factors ◽  
Artery Occlusion ◽  
Control Group ◽  
Intracranial Artery ◽  
Clinical Factors ◽  
Nihss Score ◽  
Factors Influencing

[Abstract] Objective: To investigate the influence factors of hemorrhage and stroke with retriever with Solitaire AB stent in patients with acute intracranial artery occlusion. Methods: A retrospective of 43 cases of patients with acute intracranial artery occlusion for endovascular treatment with Solitaire AB stent enrolled from March 2016 to June 2018 in our hospital, combining the characteristics of the patients of our city, through the clinical baseline data statistical analysis, complications screening of risk factors of complications. Results: There were 81.4% of patients who were dredged totally. The incidences of cerebral hemorrhage and infarction were 18.6% and 16.3%, cerebral hemorrhage group compared with control group, diabetes, blood pressure, revascularized time, NIHSS score, ASPECTS score had statistically significant differences, when infarction group compared with control group, age, opening time, ASITN_SIR score and grade of mTICI had statistically significant differences. Conclusion: Mechanical thrombectomy with Solitaire AB stent in patients with acute intracranial artery occlusion, the occurred of complications associated with various clinical factors, and the occurrence of complications seriously affect the prognosis of patients, therefore, selecting the indications strictly, and adopt individualized treatment to reduce complications.

scholarly journals DIAGNOSTICS OF ENTERPRISE LOGISTIC ACTIVITY

2020 ◽  
Vol 1 (21) ◽  
pp. 117-128
Author(s):  
Volodymyr Sysoiev ◽  
Viktoria Pysmak
Keyword(s):  
Complex System ◽  
Influence Factors ◽  
Management Process ◽  
Logistics System ◽  
Basic Principles ◽  
Wide Range ◽  
Timely Response ◽  
Enterprise Logistics ◽  
Main Components

 The main theoretical and methodological provisions of diagnostics of enterprise logistic activity as a tool of management process are investigated, it provides timely response to problems in organization of the enterprise logistics system and creation of preconditions for increasing the efficiency of its logistic activity. The mechanism of diagnostics of enterprise logistic activity in the form of a complex system, which integrates indicators, methods, special measures and procedures of research of its results in the conditions of various influence factors is proposed, is based on the basic principles of economic diagnostics and aims at achieving the goals of diagnostics. The essence of the main components of the diagnostic mechanism of enterprise logistic activity is revealed, their variety, interdependence and peculiarities of application are shown, that provides complexity and consistency in the study of a wide range of issues of organization and operation of the enterprise logistics system, as well as in evaluating the effectiveness of logistic solutions.  

scholarly journals The Importance of Online Shopping Behavior in the Strategic Management of E-Commerce Competitiveness

2020 ◽  
Vol 12 (4) ◽  
pp. 143-160
Author(s):  
Veronika Svatosova
Keyword(s):  
Strategic Management ◽  
Online Shopping ◽  
Secondary Data ◽  
Shopping Behavior ◽  
Management Process ◽  
Main Research ◽  
Online Shopping Behavior ◽  
The Impact ◽  
Strategic Management Process

In this article a total of fifteen determinants of online shopping behavior have been identified that could have an impact on the strategic management process in e-commerce competitiveness. The main objective of the paper is to evaluate the impact of determinants of online shopping behavior on the strategic management process in e-commerce. The main research methods used in the research are as follows: analysis of secondary data, a questionnaire survey among a selected group of e-commerce companies, a critical analysis and a quality comparison of the actually applied determinants of online shopping behavior. The verification of hypotheses is realized using selected methods of statistical induction and descriptive statistics. In summary, the research has shown there is no relationship between evaluating the quality of determinants companies in e-commerce and evaluating the importance of determinants of online shopping behavior. Determinants have an important impact in the process of creating and realizing an e-commerce strategy, with all e-commerce companies regardless of their size being aware of their practical impact and importance. It can be concluded the importance and quality of determinants of online shopping behavior correspond to the type of strategy and strategic management process in terms of e-commerce competitiveness.

Research on Credit Evaluation Model of C to C E-Commerce Based on Trust Influence Factors

2017 ◽  
Vol 14 (1) ◽  
pp. 189-194
Author(s):  
Xiuyan Bai
Keyword(s):  
Data Analysis ◽  
Evaluation Model ◽  
Descriptive Analysis ◽  
Influence Factors ◽  
Third Party ◽  
Trust Mechanism ◽  
The Third ◽  
Factors Influencing ◽  
Five Factors ◽  
The Third Party

Factors influencing consumer trust in C to C E-commerce were investigated through questionnaire in the Thesis and SPSS statistical software was used to conduct data analysis for questionnaire results. In data analysis, descriptive analysis, factor analysis and regression analysis were successively conducted in the Thesis and five factors influencing the trust for website and vendor by consumers were extracted in the Thesis through analysis. Finally, trust mechanism was discussed from five aspects, respectively legal restraint, market, industry supervision, the third-party certification, the third-party guarantee and trust evaluation.

Some Factors Influencing the Pitting, Micro-Pitting (Frosted Areas) and Slow Speed Wear of Surface Hardened Gears

1981 ◽  
Vol 103 (2) ◽  
pp. 499-505 ◽  
Author(s):  
H. Winter ◽  
T. Weiss
Keyword(s):  
Residual Stress ◽  
Carbon Content ◽  
Retained Austenite ◽  
White Layer ◽  
Load Capacity ◽  
Influence Factors ◽  
Surface Hardness ◽  
Considerable Influence ◽  
Slow Speed ◽  
Factors Influencing

Surface hardness and hardening depth are the most important influence factors for the load capacity of surface hardened gears. Besides the structure of the hardening pattern, it’s carbon content, amount of retained austenite, residual stress and white layer (nitrided gears) have a considerable influence. Lubricant and material of the mating gear as well as roughness of the tooth flanks have a different influence on pitting, micro-pitting and wear.

scholarly journals INFLUENCE FACTORS OF THE TACIT KNOWLEDGE ELICITATION PROCESS: SYSTEMATIC LITERATURE REVIEW

2021 ◽  
Vol 9 (25) ◽  
pp. 93-126
Author(s):  
Cláudio do Rosário ◽  
Fernando Gonçalves do Amaral
Keyword(s):  
Tacit Knowledge ◽  
English Language ◽  
Influence Factors ◽  
Knowledge Elicitation ◽  
Knowledge Engineer ◽  
Main Research ◽  
Seci Model ◽  
Research Findings ◽  
Elicitation Process ◽  
Meta Analyses

Goal: This systematic review aimed at highlighting and performing an integrated discussion of the factors of the tacit knowledge elicitation process.   Design/Methodology/Approach: The research method adopted in this study was (PRISMA) Preferred Reporting Items for Systematic Reviews and Meta-Analyses. The databases, Science Direct, Web of Science, Scopus, and Emerald Insight were chosen based on the possibility of finding articles from collections such as Elsevier, Springer e Taylor & Francis. Search terms related to “knowledge Elicitation” are the following:   "knowledge Elicitation" OR "knowledge acquisition" AND technique AND “Tacit Knowledge".   Results: The main research findings listed by the article were the inclusion of a knowledge engineer considering the SECI model, the indication of predictability in the perception of episodic knowledge in a tacit knowledge elicitation process, and the hybrid adoption of knowledge elicitation techniques. Limitations of the research: The selection criteria were based only on articles written in the English language and taking into consideration the period from 2008 to 2020. Originality/value: The structure of this article was based on the indication of theoretical gaps and the need to deepen the themes underlying the process of eliciting tacit knowledge, which allowed a systematic exposure of a broad scenario that represents the scope and complexity.

INFLUENCE FACTORS ON SHG IN PCs CONSISTING OF CENTRO-SYMMETRIC MATERIALS

2011 ◽  
Vol 25 (20) ◽  
pp. 2657-2663 ◽  
Author(s):  
JIANPING SHI ◽  
XUNAN CHEN
Keyword(s):  
Fill Factor ◽  
Photonic Band Gap ◽  
Second Harmonic ◽  
Influence Factors ◽  
Angle Of Incidence ◽  
Factors Influencing ◽  
Key Factor ◽  
Waveguide Length ◽  
Difference Time ◽  
Photonic Band

Based on the finite difference-time domain algorithm, the factors influencing second harmonic generation in photonic crystals consisting of centro-symmetric materials are analyzed. The results show that photonic band gap is the key factor inducing the generation of second harmonic (SH). The suitable angle of incidence of pumping wave, waveguide length and fill factor will be helpful for the enhancement of SH. For the structure in this paper, when the angle of incidence is 20°–30°, SH intensity will be five times to that when the angle is nearly 90.° According to the results of our computations, the critical wave-guide length is 50 μm for the maximal intensity of SHG.

Analysis of the Influence Factors on the Differential Diagnosis Between Benign and Malignant 4-Class Thyroid Nodules by the Ratio of the Elastic Strain Rate

2020 ◽  
Vol 10 (3) ◽  
pp. 731-735
Author(s):  
Peng An ◽  
Yingjian Ye ◽  
Yuxin Ning ◽  
Wei Feng ◽  
Yang Li ◽  
...  
Keyword(s):  
Differential Diagnosis ◽  
Thyroid Gland ◽  
Strain Rate ◽  
Roc Curve ◽  
Elastic Strain ◽  
Operating Characteristic ◽  
Thyroid Nodules ◽  
Influence Factors ◽  
Factors Influencing ◽  
Surgical Operations

Objective: This study aimed to investigate the value of elastic strain rate ratio (SR) in the differential diagnosis of benign and malignant thyroid imaging reporting and data system (TI-RADS) 4 nodules under the influence of various factors. Method: This study included 180 patients with type 4 unifocal thyroid nodules diagnosed by ultrasound examination in the Xiangyang No. 1 People's Hospital from March 2016 to March 2019. All patients underwent elasticity imaging and surgical operations. The pathological results were used as the gold standard to perform logistic regression analyses and identify the factors influencing the differential diagnosis of benign and malignant thyroid nodules. Then, the receiver operating characteristic (ROC) curve was drawn. Results: The ROC curve suggested a cutoff value of 0.52 in differentiating between benign and malignant TI-RADS 4 nodules using the SR value. The nodule size, calcification, border, and thyroid gland with diffuse lesions were factors influencing the differential diagnosis of benign and malignant TI-RADS 4 nodules with the SR value. SR had a high accuracy identifying benign and malignant TI-RADS 4 nodules with a diameter of less than 0.8 cm (but >0.4 cm), no or granular calcification, nodules with blurred borders, and no thyroid gland with diffuse lesions. Conclusion: The diagnostic accuracy was improved by combining the two-dimensional ultrasound with SR determination in the differential diagnosis of benign or malignant TI-RADS 4 nodules.

Based on the FTA of Electronic-Control Engine Start Fault Diagnosis Analysis

2013 ◽  
Vol 303-306 ◽  
pp. 871-875
Author(s):  
Jian Chun Gong ◽  
Deng Rong Zhou ◽  
Zong Biao Lu ◽  
Zhong Fa Mao
Keyword(s):  
Qualitative Analysis ◽  
Fuel Injection ◽  
Fault Tree ◽  
Influence Factors ◽  
Fault Tree Analysis ◽  
Electronic Control ◽  
Working Principle ◽  
Engine Maintenance ◽  
Engine Start ◽  
Main Influence

Based on the analysis and the induction of electronic control fuel injection engine common failure which can't start, and according to the engine’s working principle and failure mechanism, established the electronic control fuel injection engine’s fault tree, and having made qualitative analysis about the working reliability of the engine by using the fault tree analysis method. This paper offered the electronic control fuel injection engine’s failure form which can’t start in classification, discussed the process of establishing the fault tree at length, even built and mapped the engine’s fault tree which can’t start; According to the natural gas compressor’s fault tree diagram, and applying the descending method to get the fault’s minimal cut sets. By making qualitative analysis, finding out the main influence factors of failure, and putting forward quite perfect methods of removing fault, which providing electronic fuel injection engine maintenance with the beneficial reference.

Sign in / Sign up

Export Citation Format

Share Document