Changes in the External Environment and of Interior Microclimate as a Consequence of Energetic Modernization of Building

2014 ◽  
Vol 1020 ◽  
pp. 585-590
Author(s):  
Anna Lis ◽  
Adam Ujma

The paper presents the results of the research in building after thermal modernization. The analysis includes energy consumption for heating of the building, the nature of the microclimate in rooms and pollutant emissions to atmosphere of fuel combustion products. This analysis was carried out to evaluate the influence of energy saving activities on microclimate interior conditions and the state of the external environment.

Symmetry ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 344
Author(s):  
Alejandro Humberto García Ruiz ◽  
Salvador Ibarra Martínez ◽  
José Antonio Castán Rocha ◽  
Jesús David Terán Villanueva ◽  
Julio Laria Menchaca ◽  
...  

Electricity is one of the most important resources for the growth and sustainability of the population. This paper assesses the energy consumption and user satisfaction of a simulated air conditioning system controlled with two different optimization algorithms. The algorithms are a genetic algorithm (GA), implemented from the state of the art, and a non-dominated sorting genetic algorithm II (NSGA II) proposed in this paper; these algorithms control an air conditioning system considering user preferences. It is worth noting that we made several modifications to the objective function’s definition to make it more robust. The energy-saving optimization is essential to reduce CO2 emissions and economic costs; on the other hand, it is desirable for the user to feel comfortable, yet it will entail a higher energy consumption. Thus, we integrate user preferences with energy-saving on a single weighted function and a Pareto bi-objective problem to increase user satisfaction and decrease electrical energy consumption. To assess the experimentation, we constructed a simulator by training a backpropagation neural network with real data from a laboratory’s air conditioning system. According to the results, we conclude that NSGA II provides better results than the state of the art (GA) regarding user preferences and energy-saving.


Author(s):  
Valery Glebovich Larionov ◽  
Marina Gennad'evna Treyman

The article gives the analysis of resource saving and energy efficiency of the enterprises of water supply and waste water services of the State Unitary Enterprise “St. Petersburg Vodokanal”. There has been evaluated the consumption of electrical energy by the enterprise. The main methods of energy resources management (creating a system of rational consumption and saving of energy resources, using energy-efficient materials, equipment and technologies, identifying the potential of energy-saving measures at operating facilities) have been determined. The priority directions for reducing the production energy intensity in the water supply processes have been defined. An algorithm is proposed that includes the processes of collecting, modeling, structuring information, as well as developing an optimal solution for an enterprise. A model for optimizing work in water supply processes is presented, software products are considered that allow to control the processes of energy saving and energy efficiency. The most promising software products for their introducing them into practice of the enterprise have been identified, including General Electric Intelligent Platforms CSense. A plan for the sequential implementation of the software product into operation at the enterprise is presented. The dynamics of electricity consumption at the enterprise, the structure of energy consumption are illustrated. It is noted that the most significant contribution to the amount of energy consumption is made by the technological processes of water intake and supply. It has been substantiated that the most energy-consuming process for the enterprise (Water Supply Branch of the State Unitary Enterprise St. Petersburg Vodokanal) is replacement or maintenance of pumping equipment. The components of energy conservation of the enterprise under study are the partial regulation and automation of processes.


2013 ◽  
Vol 772 ◽  
pp. 868-871
Author(s):  
Sun Lei ◽  
Zhong Fu Tan ◽  
Li Wei Ju ◽  
He Yin ◽  
Zhi Hong Chen

As a large energy consumption and pollutants emission department, power industry energy saving and emission reduction is of great significance for the community's overall energy consumption and pollutants emission control. As the main energy saving measures of the power industry, optimize the structure of power based on grid-connected renewable energy. Therefore, this article is based on energy distribution in China, considering load, electricity, resources, environmental pollution and the unit served, target is the total system power generation installed capacity and pollutant emissions at minimum costs, to construct generation resource planning optimization model under emission constraint, install generation capacity costs, running costs and the cost of pollutant emissions will be take into account, in order to make reasonable recommendations on power resource planning in China.


2014 ◽  
Vol 1073-1076 ◽  
pp. 2719-2727
Author(s):  
Bing Qiao ◽  
Yi Chao Liu ◽  
Wei Jian He ◽  
Yu Jun Tian ◽  
Yue Li ◽  
...  

Based on methods of the fuel consumption, statistical and analogy analysis, the throughput amount method was established to calculate the emissions from port handling, and the minimum mileage method was established to estimate emissions from port cargo highway distributing. In the methods, some coefficients were used obtained by investigations: the current container handling emission factors of NOx, VOCs, CO, PM2.5 and SOx are 1.64, 0.21, 0.42, 0.01 and 0.29 t/TEU; the energy consumption of the unit throughput is 4.12 tons of standard coal per 104tons; the ratios of the unit non container cargoe handling energy consumption for coastal and inland river ports to those of container cargo are 0.631 and 0.405; the ratio of the unit non container cargoe highway distributing energy consumption to those of container cargo is 0.365. The calculation results show that the total emissions from the cargo handling and highway distributing of 2013 in China for NOx, VOCs, CO, PM2.5 and SOx are 54.365, 14.821, 24.631, 5.599 and 16.802 104tons, and the emissions from highway distributing are 4.21, 10.02, 8.24, 8.22 and 8.19 times of the emissions from port handling facilities. According to energy saving and emission reduction measures, formulas were established to calculate air pollutant emissions after the new added measures. Analyzing the real performance of the measures implemented since 2001 and predicting its trend of development, a scenario was designed, in which the Chinese port throughput continuously rises while the energy saving and emission reduction efforts gradually increase by 2020: the popularities of the energy saving measure of "oil changing to electricity" and the clean fuel measure of "oil changing to gas" reach 100% and 83%; the proportion of power plants with 95% desulfurization and denitrification reaches 100%; the energy saving and emission reduction efficiency of port cargo distributing optimization measures reaches 40%. Under this scenario, the prediction shows that during the port throughput increasing approximately 4.2 times from 2005 to 2020, the air pollutant emissions will be reduced significantly, returning to a lower level compared with 2005. The above methods and results can be used to support the decision-making and the implementation of emission reduction measures for the national, regional and port enterprises.


2020 ◽  
Vol 166 ◽  
pp. 04002
Author(s):  
Myroslav Syvyi ◽  
Natalia Panteleeva ◽  
Liudmyla Burman ◽  
Olga Kalinichenko ◽  
Mykhailo Provozhenko

The issue of energy-saving and energy efficiency is actual at the present-day development of Ukraine’s economy. The imperfective system of energy ensuring as the result of inefficient energy resources utilization is a characteristic feature of the state. The analysis of ensuring energy resources applied to Dnipropetrovsk Region as one of the leading industrial regions of the country is presented in the article. The availability of reserves and production of fuel resources was analyzed in it. Distinctive features of energy resources consumption with the aim of assessment general and partial indexes of energy ensuring and fuel power-intensity of the region’s economic complex are highlighted in the work. The tendencies and perspectives of energy consumption development of the Dnipropetrovsk Region were analyzed herewith.


2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Jingyuan Shi ◽  
Qiuna Li

Different from the state of large-scale energy use and concentrated energy conservation in urban areas, the state of energy use and energy conservation in rural areas has its own characteristics and typical problems. Rural areas have been concentrated on the multiple differences in economic, social, and construction characteristics such as mountain and peace dam topography, natural and artificial construction, developed and underdeveloped, rapid urban development, and relatively backward rural development. It has practical problems that need to be solved urgently, such as the “insufficient savings” in the construction of farmhouses and the “insufficient open source” of clean energy applications. The discussion will be conducted from three aspects: the planning and layout design of rural houses in Chongqing, the performance of the enclosure structure of rural houses in key seasons, and the application of renewable clean energy in rural houses. Then put forward is the energy-saving design path of Chongqing farmhouse. It aims to improve the indoor and outdoor thermal environment of farmhouses, saving heating energy consumption in winter and air-conditioning energy consumption in summer and effectively benefit users to use renewable energy such as biogas, straw, and solar energy. Finally, explore the adaptability between the design methods of farmhouses and the local characteristics of Chongqing’s rural areas. In the work of Chongqing Design Going to the Countryside, we create a contemporary farmhouse case that is not only energy-saving but also has good indoor and outdoor space quality. It also provides a reference for the energy-saving design of farmhouses in Chongqing and other regions in China.


Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4370 ◽  
Author(s):  
Hamad M. Alhajeri ◽  
Abdulrahman Almutairi ◽  
Abdulrahman Alenezi ◽  
Faisal Alshammari

The present paper reports the impact of the Covid-19 pandemic on the electricity peak load and power generation in the State of Kuwait during the partial and full curfews imposed in March, April and May 2020 using historic data measured data and the predictions provided by a statistical genetic algorithm model. A quantitative assessment is made of the economic and environmental impacts caused by partial and full lockdowns. Comparison of measured peak demand for 2019 and 2020 with predicted peak demand for 2020 has: (i) enabled an accurate evaluation of residential energy consumption in the state of Kuwait at nearly 18 MWh yearly the highest energy consumption per capita in the world, (ii) shown that the imposition of the curfews to reduce the spread of COVID-19 caused a fall in the demand for electrical power of 17.6% compared with the expected demand and (iii) quantified the reduction in CO2, NOx and CO pollutant emissions produced by power plants due to less fuel being consumed. A mathematical model has been developed to predict the peak electric load in the national grid according to climatic data supplied by the Meteorological Department of Civil Aviation of Kuwait and National Control Center (NCC).


Author(s):  
Mingliang Bai ◽  
Wenjiang Yang ◽  
Dongbin Song ◽  
Marek Kosuda ◽  
Stanislav Szabo ◽  
...  

The rapid development of industry results in large energy consumption and a negative impact on the environment. Pollution of the environment caused by conventional energy sources such as petrol leads to increased demand for propulsion systems with higher efficiency and capable of energy-saving and emission reduction. The usage of hybrid technology is expected to improve energy conversion efficiency, reduce energy consumption and environmental pollution. In this paper, the simulation platform for the hybrid unmanned aerial vehicle (UAV) has been built by establishing the subsystem models of the UAV power system. Under the two chosen working conditions, the conventional cruise flight mission and the terrain tracking mission, the power tracking control and Q-Learning method have been used to design the energy management controller for the hybrid UAV. The fuel consumption and pollutant emissions under each working condition were calculated. The results show that the hybrid system can improve the efficiency of the UAV system, reduce the fuel consumption of the UAV, and so reduce the emissions of CO2, NOx, and other pollutants. This contributes to improving of environmental quality, energy-saving, and emission reduction, thereby contributing to the sustainable development of aviation.


Author(s):  
Tatyana Averina ◽  
Nataliya Levkina

The main economic factors influencing the efficiency of energy saving projects are energy prices and the cost of new technologies. The article makes an attempt to use the model of built-in stabilizers to explain the influence of these factors on the volume of energy consumption and the role of the state mechanism for stimulating innovation in this area.


Author(s):  
Е.Ю. Соколов ◽  
А.И. Адаев ◽  
А.А. Фомин ◽  
Л.Г. Магурдумова

In article the importance of use of psychotherapeutic actions of self-control by employees of a dangerous profession is stated during the work in emergency situations. The state of health of fighters who before the direction in business trip were trained previously in self-control methods at different stages of performance of a fighting task, with a condition of group of the military personnel who didn’t pass preliminary training in energy saving methods is compared.


Sign in / Sign up

Export Citation Format

Share Document