Noise Analysis of Diamond Saw Blade

2015 ◽  
Vol 1095 ◽  
pp. 773-776
Author(s):  
Min Zhao ◽  
Lin Zhang ◽  
Bei Ming Tang ◽  
Kattan Maher
Keyword(s):  
Working Condition ◽  
Noise Analysis ◽  
Experimental Results ◽  
Circular Saw ◽  
Cutting Machine ◽  
Different Types ◽  
Diamond Saw ◽  
Saw Blade

In this paper, noise of diamond circular saw blades has been measured, five different types of saw blades are used to measure their noise under different working condition. By analyzing of the experimental results, the effect of different factors on the saw blade noise is studied. The result shows that the increasing the speed of cutting machine or the diameter of blade, noise will become larger. The noise of saw blade with a hole or water slot would be greater than others without any hole or water slot.

Dry-Cutting Concrete Study of Diamond Saw Blade with Different Segment Width

2006 ◽  
Vol 532-533 ◽  
pp. 321-324 ◽  
Author(s):  
Shan Shan Hu ◽  
Cheng Yong Wang ◽  
Bang Dao Chen ◽  
Ying Ning Hu
Keyword(s):  
Cutting Parameters ◽  
Structure Parameters ◽  
Optimum Structure ◽  
Dry Cutting ◽  
Workpiece Material ◽  
Sawing Force ◽  
Circular Saw ◽  
Circular Saw Blade ◽  
Diamond Saw ◽  
Saw Blade

Three kind of diamond circular saw blade with different structure parameters are designed in this paper. Adopted single-factor test, sawing force and vibration are measured by cutting several kinds of strength concrete in different cutting parameters. The analysis to characters of sawing force and vibration helps to find out optimum structure of diamond saw blade with different segment width, more rational sawing parameter and its adaptability to workpiece material.

Frequency Reliability Analysis of Diamond Circular Saw Blade

2013 ◽  
Vol 380-384 ◽  
pp. 128-131
Author(s):  
Zhe Yuan ◽  
Zi Fang Qin ◽  
Rui Yuan Cao ◽  
Li Li Song
Keyword(s):  
Finite Element ◽  
Reliability Analysis ◽  
Structural Reliability ◽  
Impact Factors ◽  
Sensitivity Index ◽  
Element Analysis ◽  
Finite Element Software ◽  
Circular Saw ◽  
Diamond Saw ◽  
Saw Blade

To improve the performance of diamond saw blade sawing, reduce vibration at the time of its work, prevent the blade resonance, the parametric model of diamond saw blade was been established based on the finite element software ANSYS, and the analysis file was been established through the structural reliability analysis module of the finite element analysis software ANSYS. The finite element method combined with the Monte Carlo method can be used to get the sensitivity index which effect the diamond saw blade security and the probability distribution function and the other principal impact factors, and which is theoretical basis for the diamond saw blade optimization and design.

Tests for the Optimization of Cut-Off Parameters for Seven Galician Granite Varieties

2013 ◽  
Vol 548 ◽  
pp. 82-89
Author(s):  
Maria Araújo Fernández ◽  
Javier Taboada Castro ◽  
Jose Antonio Vilán Vilán ◽  
Nuria Sánchez Delgado
Keyword(s):  
Cutting Speed ◽  
Direct Consequence ◽  
Cutting Parameters ◽  
Extraction Methods ◽  
Graphical Analysis ◽  
Cutting Efficiency ◽  
Optimum Configuration ◽  
Circular Saw ◽  
Diamond Saw ◽  
Saw Blade

The ornamental rock sector in Galicia (NW Spain), in particular the granite extraction and processing sector, has undergone tremendous development in recent years as a direct consequence of the use of non-aggressive rock mass extraction methods and the progressive modernization and automation of the different processes for processing and finishing the slabs, as well as the improvement of in-plant logistics. Nevertheless, it has been ascertained that cutting parameters entered as setpoint values in the diamond circular saws, used for the subdivision of slabs of the different commercial granite varieties, do not fit clear technical criteria for the optimization of cutting efficiency, but are selected and pre-set based on the experience of the circular saw operator. In order to evaluate the validity of thus selected cutting parameters and to provide the sector with a more objective tool, the cutting performance of seven granite varieties from Galicia which have high sales was analysed. Thus, each available slab was subdivided using four different cutting settings resulting from modifying two of the parameters which most affect cutting efficiency: cutting speed (m/min) and cutting depth (mm). These parameters, in turn, have an influence on power consumption (kWh), diamond saw blade wear (mm) and average production (mm2/min). Thereby, an exhaustive data acquisition process was carried out in order to create a complete database with the representative information of the cutting of each of the seven tested varieties and determine the optimum configuration for cutting each material, based on the results of a graphical analysis of the mean of data and the analysis of the variance (ANOVA).

scholarly journals Interchange of Heat in Saw Disc Body During Cutting

2019 ◽  
Vol 4 (1) ◽  
pp. 488-494
Author(s):  
Jan Svoren ◽  
Lubomir Javorek ◽  
Lubomir Nascák
Keyword(s):  
The Body ◽  
Experimental Results ◽  
Measured Temperature ◽  
Infrared Thermometer ◽  
Circular Saw ◽  
Spruce Wood ◽  
Circular Saw Blade ◽  
Saw Blade ◽  
Picea Excelsa

The paper presents the experimental results of a research aimed at the distribution of the temperature on the circular saw blade body. The temperature was measured at two distances from the centre of the circular saw blade body (70 mm, 140 mm) by means of an infrared thermometer. Two circular saw blades with the diameter of 350 mm and a variable adjustment of the body (with slots and without the coating, with both slots and coating) were used for the longitudinal sawing of the spruce wood (Picea excelsa) with the thickness of h = 37 mm. Feed speeds ware vf1 = 14 mpm, vf2 = 17 mpm and vf3 = 20 mpm. Cutting revolutions n = 4100 /min. were constant. The measured temperature was in the range from 21 °C till 27 °C. The highest measured temperatures were recorded on the circular saw blade with the slots and coating.

Electron Probe Microanalysis of Frozen Hydrated Kidneys, Isolated Cells, and Cultured Cells

1982 ◽  
Vol 40 ◽  
pp. 402-403 ◽  
Author(s):  
Claude Lechene
Keyword(s):  
Liquid Nitrogen ◽  
Electron Probe Microanalysis ◽  
Electron Probe ◽  
Cultured Cells ◽  
Liquid Nitrogen Temperature ◽  
Elemental Content ◽  
Isolated Cells ◽  
Renal Tubular Cells ◽  
Diamond Saw ◽  
Saw Blade

Electron probe microanalysis of frozen hydrated kidneysThe goal of the method is to measure on the same preparation the chemical elemental content of the renal luminal tubular fluid and of the surrounding renal tubular cells. The following method has been developed. Rat kidneys are quenched in solid nitrogen. They are trimmed under liquid nitrogen and mounted in a copper holder using a conductive medium. Under liquid nitrogen, a flat surface is exposed by sawing with a diamond saw blade at constant speed and constant pressure using a custom-built cryosaw. Transfer into the electron probe column (Cameca, MBX) is made using a simple transfer device maintaining the sample under liquid nitrogen in an interlock chamber mounted on the electron probe column. After the liquid nitrogen is evaporated by creating a vacuum, the sample is pushed into the special stage of the instrument. The sample is maintained at close to liquid nitrogen temperature by circulation of liquid nitrogen in the special stage.

scholarly journals How the Multiplicity of Suggested Information Affects the Behavior of a User in a Recommender System

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 741
Author(s):  
Yuseok Ban ◽  
Kyungjae Lee
Keyword(s):  
High Precision ◽  
Recommender System ◽  
Visual Information ◽  
Experimental Results ◽  
Supplementary Information ◽  
Digital Platform ◽  
Different Types ◽  
Types Of Information

Many researchers have suggested improving the retention of a user in the digital platform using a recommender system. Recent studies show that there are many potential ways to assist users to find interesting items, other than high-precision rating predictions. In this paper, we study how the diverse types of information suggested to a user can influence their behavior. The types have been divided into visual information, evaluative information, categorial information, and narrational information. Based on our experimental results, we analyze how different types of supplementary information affect the performance of a recommender in terms of encouraging users to click more items or spend more time in the digital platform.

RELIABILITY ASSESSMENT OF AXIALLY COMPRESSED COMPOSITE CYLINDRICAL SHELLS WITH RANDOM IMPERFECTIONS

2011 ◽  
Vol 11 (02) ◽  
pp. 215-236 ◽  
Author(s):  
MATTEO BROGGI ◽  
ADRIANO CALVI ◽  
GERHART I. SCHUËLLER
Keyword(s):  
Mathematical Models ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
Reliability Assessment ◽  
Buckling Analysis ◽  
Buckling Load ◽  
Experimental Results ◽  
Drastic Decrease ◽  
Different Types ◽  
Probability And Statistics

Cylindrical shells under axial compression are susceptible to buckling and hence require the development of enhanced underlying mathematical models in order to accurately predict the buckling load. Imperfections of the geometry of the cylinders may cause a drastic decrease of the buckling load and give rise to the need of advanced techniques in order to consider these imperfections in a buckling analysis. A deterministic buckling analysis is based on the use of the so-called knockdown factors, which specifies the reduction of the buckling load of the perfect shell in order to account for the inherent uncertainties in the geometry. In this paper, it is shown that these knockdown factors are overly conservative and that the fields of probability and statistics provide a mathematical vehicle for realistically modeling the imperfections. Furthermore, the influence of different types of imperfection on the buckling load are examined and validated with experimental results.

Sign in / Sign up

Export Citation Format

Share Document