The Core Applications and Experience of Typical 3G Operators

2011 ◽  
Vol 204-210 ◽  
pp. 1536-1539
Author(s):  
Xia Chen ◽  
Ting Jie Lu
Keyword(s):  
Mobile Phones ◽  
Integrated Services ◽  
Multilateral Cooperation ◽  
The Core ◽  
Industrial Chain ◽  
Personalized Services ◽  
Personal Assistant ◽  
Different Characteristics

3G applications have developed rapidly in some countries. The experience of operating 3G core applications from some operators is worth learning. This paper summarized five main principles based on describing the core applications of typical 3G operators: 1. Provide personalized services: provide practical services to meet the needs of customers in all aspects, act as customers’ personal assistant; 2. Provide personalized and customized services, according to the needs of different customers: According to the different characteristics of different customers, customize personalized services; 3. Provide integrated services: connect mobile phones with other tools, develop converged services; 4. Innovate services continuously: Combine with the original advantages of the companies, innovate services continuously, seek for the development of differentiation; 5. Expand the cooperation among the industrial chain, attract and develop customers: make multilateral cooperation, provide a variety of services and promote mutual development of the industry.

Premises, Policies and Multilateral Whitewashing of Broad Security Doctrines: A Southeast Asia-Based Critique of “Non-traditional” Security

2019 ◽  
Vol 6 (1-2019) ◽  
pp. 5-26
Author(s):  
Delphine Allès
Keyword(s):  
Southeast Asia ◽  
Human Security ◽  
Armed Forces ◽  
Southeast Asian ◽  
Political Elites ◽  
Multilateral Cooperation ◽  
The Core ◽  
Political Roles ◽  
Policy Transformation ◽  
Semantic Evolution

This article highlights the formulation of comprehensive conceptions of security in Indonesia, Malaysia and within the framework of the Association of Southeast Asian Nations (ASEAN), well before their academic conceptualisation. These security doctrines have been the basis of the consolidation of state and military apparatuses in the region. They tend to be overlooked by analyses praising the recent conversion of Southeast Asian political elites to the “non-traditional security”? agenda. This latter development is perceived as a source of multilateral cooperation and a substitute for the hardly operationalisable concept of human security. However, in the region, non-traditional security proves to be a semantic evolution rather than a policy transformation. At the core of ASEAN’s security narrative, it has provided a multilateral anointing of “broad” but not deepened conceptions of security, thus legitimising wide-ranging socio-political roles for the armed forces.

EXPERIENCE, PROSPECTS AND PROBLEMS OF COOPERATION BETWEEN CHINA AND TURKMENISTAN IN THE FIELDOF NATURAL GAS

2019 ◽  
pp. 323-329
Author(s):  
Y. JIA
Keyword(s):  
Natural Gas ◽  
Central Asia ◽  
Oil And Gas ◽  
The European Union ◽  
Multilateral Cooperation ◽  
Industrial Chain ◽  
The Usa ◽  
Gas Consumption ◽  
Slow Progress ◽  
Natural Gas Consumption

Since 2007, the use of natural gas in China depends on the import, and with an increase in natural gas consumption, gas imports are also constantly growing. In 2018, Chinas natural gas imports approached 100 billion cubic meters, which is 70 times more than in 2006. In recent years, increasing attention has been paid to the use of natural gas in China. Turkmenistan is Chinas main source of pipeline gas imports, and China is Turkmenistans largest exporter of natural gas. In the framework of the traditional model of oil and gas cooperation, China and Turkmenistan are facing such problems as the uniform content of cooperation, lack of close ties in the field of multilateral cooperation and slow progress in the development of the entire industrial chain. Cooperation between China and Central Asia in the field of oil and gas is increasingly affecting the nerves of other countries, except the five countries of Central Asia, but including Russia, Afghanistan, Pakistan, India, Iran and other countries of the Middle East, Japan, South Korea, etc. and even the European Union and the USA. Despite the favorable trading environment for both parties, there are also problems in the domestic market of Turkmenistan and the risks of international competition.

Societal Drivers of Food and Water Systems 1

2018 ◽  
pp. 284-301
Author(s):  
Michael Thompson ◽  
M. Bruce Beck ◽  
Dipak Gyawali
Keyword(s):  
Mobile Phones ◽  
Wastewater Treatment Plants ◽  
Water Systems ◽  
Food Chains ◽  
Material Flows ◽  
The Core ◽  
Production And Consumption ◽  
The World ◽  
Nitrogen Phosphorus ◽  
Plural Rationality

Food chains interact with the vast, complex, and tangled webs of material flows —nitrogen, phosphorus, carbon, water, energy—circling the globe. Cities and households are where those material flows interact with the greatest intensity. At every point within these webs and chains, technologies enable them to function: from bullock-drawn ploughs, to mobile phones, to container ships, to wastewater treatment plants. Drawing on the theory of plural rationality, we show how the production and consumption of food and water in households and societies can be understood as occurring according to four institutionally induced styles: four basic ways of understanding the world and acting within it; four ways of living with one another and with nature. That there are four is due to the theory of plural rationality at the core of this chapter.

Information Filtering and Personalization Services

2005 ◽  
pp. 76-96 ◽  
Author(s):  
Chunxiao Xing ◽  
Chun Zeng ◽  
Zhiqiang Zhang ◽  
Lizhu Zhou
Keyword(s):  
Digital Libraries ◽  
Information Filtering ◽  
Vector Space Model ◽  
Research Area ◽  
User Interests ◽  
The Core ◽  
Personalized Services ◽  
Key Technologies ◽  
Similarity Computation ◽  
And Performance

Personalization service is becoming one of the core services in digital libraries, and an exciting and challenge research area. In this chapter, we analyze several key technologies and the related works in information filtering and personalized services, and then present a content-based personalized searching algorithm and a probabilistic model to represent user interests, which is more effective than the vector space model by the experiments. To solve the data sparsity and scalability problems in collaborative filtering, we present new methods for similarity computation and instance selection. The experiments show it is higher predicted precision and performance than the others. Based on the above research results, we design and develop a prototype, TH-PASS, which provides personalized searching and recommending services.

Research on the Metadata Storage Mode and Efficiency of Distributed File System Based on HGML

2010 ◽  
Vol 40-41 ◽  
pp. 221-227 ◽  
Author(s):  
Fang Miao ◽  
Fu Chao Cheng ◽  
Wen Hui Yang ◽  
Li Tan
Keyword(s):  
Spatial Data ◽  
File System ◽  
Distributed File System ◽  
Entire System ◽  
The Core ◽  
Different Characteristics ◽  
Massive Spatial Data ◽  
Access Efficiency

In the G / S mode, in order to meet the storage demands of massive spatial data, the requirements of the distributed file system (DFS) on back-end servers are extremely high. As one of the core tasks of DFS, the metadata storage is the necessary premise which ensures the reliability and efficiency of the entire system. This paper introduces a metadata storage mode based on HGML, and then designs and implements two solutions, which are scattered storage and integrated storage. According to the different characteristics of the two solutions, access efficiency of the metadata has been tested respectively. The result shows that the new metadata storage mode can basically satisfy the storage demands of massive spatial data.

A Comparative Study of Consumer’s Gender Based Attitude towards Mobile Value Added Services in Jalandhar District Using Tri-Component Model

2013 ◽  
Vol 3 (3) ◽  
pp. 18-36
Author(s):  
Savdeep Vasudeva ◽  
Gurdip Singh
Keyword(s):  
Comparative Analysis ◽  
Mobile Phones ◽  
Text Messaging ◽  
Consumer Behaviour ◽  
Value Added ◽  
Component Model ◽  
The Core ◽  
Males And Females ◽  
Gender Based ◽  
Secondary Methods

Mobile value added services (MVAS) are different from the core services such as calling, text messaging and extend the usability of mobile phones. This study has been carried out with the purpose to make a comparative analysis of the genders in context of their awareness and attitude towards MVAS. As a part of theoretical framework, the Tri-component model of consumer behaviour has been used to measure the attitude of consumers based on cognitive, affective and conative components. This study uses both primary and secondary methods of data collection. The responses of the users have been presented and analysed through hypothesis testing. As per the findings of the study, males and females differ in awareness towards MVAS. Overall, the mobile phone users differ significantly in attitude towards value added services. However, this not true when genders in conjunction to their respective attitude components are taken into consideration.

scholarly journals Experiences with distributed computing for meteorological applications: Grid computing and Cloud computing

2015 ◽  
Vol 8 (2) ◽  
pp. 1171-1199 ◽  
Author(s):  
F. Schüller ◽  
S. Ostermann ◽  
R. Prodan ◽  
G. J. Mayr
Keyword(s):  
Distributed Computing ◽  
Grid Computing ◽  
High Performance ◽  
Cost Effective ◽  
Use Case ◽  
The Core ◽  
Wide Range ◽  
Different Characteristics ◽  
Performance Computing ◽  
Computing Capacity

Abstract. Experiences with three practical meteorological applications with different characteristics are used to highlight the core computer science aspects and applicability of distributed computing to meteorology. Presenting Cloud and Grid computing this paper shows use case scenarios fitting a wide range of meteorological applications from operational to research studies. The paper concludes that distributed computing complements and extends existing high performance computing concepts and allows for simple, powerful and cost effective access to computing capacity.

Friction Welding Structures of Carburized Steels

2010 ◽  
Vol 638-642 ◽  
pp. 3781-3786 ◽  
Author(s):  
Ion Mitelea ◽  
Corneliu Marius Crăciunescu
Keyword(s):  
Friction Welding ◽  
Intermetallic Phases ◽  
Rotational Energy ◽  
Manufacturing Industries ◽  
Critical Problem ◽  
High Reproducibility ◽  
Structural Morphology ◽  
The Core ◽  
Friction Energy ◽  
Different Characteristics

Friction welding is one of the most reliable joining techniques for various materials due to a high reproducibility, lack of ecological treats and a relatively narrow thermomecanical affected zone. It offers multiple applicative opportunities in various fields – from automotive and manufacturing industries as well as for special destinations – leading to incontestable technical and economical advantages. However, the friction welding of materials with compositional and/or structural gradients is a critical problem due to the high probability of cracks occurrence, the formation of intermetallic phases that increase the brittleness and a high gradient for residual stresses. The paper refers to the particularities of graded welds through which the rotational energy will be transformed by friction into heat in the surface layer with a certain structural morphology, as well as in the core with different characteristics. Experiments have been performed in order to assess the process parameters which provide the optimal friction energy for an adequate plastifiation of the materials. Macro and optical micrographic investigations corroborated with electron microscopy and hardness measurements provide information concerning the hardening of the thermomecanically affected zone and the formation of seam as result of expulsion of the carburized layer.

scholarly journals Research on the Dynamic Mechanism of National Pharmaceutical Industry Chain

2020 ◽  
Vol 218 ◽  
pp. 03020
Author(s):  
Liping Xiao ◽  
Yafang Huang
Keyword(s):  
National Bureau ◽  
Grassroots Development ◽  
Industry Chain ◽  
Development Status ◽  
The Core ◽  
National Medical ◽  
Industrial Chain ◽  
Medical Institutions ◽  
Statistical Yearbook ◽  
Core Problem

This paper relies on the “China Health and Family Planning Statistical Yearbook” published by the National Bureau of Statistics. Analyzing the current development status of ethnic medicine, the driving force of the national medicine industry chain is the national medicine industry, especially the development of grassroots national medical institutions, and the core problem of solving the grassroots development is the construction of national physicians and the accelerated cultivation of national medical talents. Providing sufficient human resources to grassroots medical institutions is an important guarantee for the development of national medicine industry. Finally, on the basis of research, the development model of the national industrial chain of ethnic medicine was established.

scholarly journals Space Structure of Rumah Panjang (Radakng) of Dayak Kanayatn People in West Kalimantan

ARTic ◽  
2020 ◽  
Vol 3 (1) ◽  
pp. 249-258
Author(s):  
Mario Mario ◽  
Widagdo Widagdo
Keyword(s):  
Community Service ◽  
Small Groups ◽  
Space Structure ◽  
Musical Instruments ◽  
Traditional Values ◽  
West Kalimantan ◽  
The Core ◽  
Descriptive Approach ◽  
Different Characteristics ◽  
Ways Of Life

Dayak people live on the island of Kalimantan and live in groups such as, Iban, Kayan, Bidayuh, Kanayatn and other groups scattered in small groups and have different characteristics from each other. They live in longhouse (rumah panjang ) the traditional houses that have space for some families to live in. The problem is that many People of Kalimantan do not use rumah panjang  as a place to live, this is due to various factors, such as technological and economic advances that have an impact on changing ways of life. Rumah panjang has traditional values to be preserved as a cultural treasure of Indonesia. If the values of the tradition are extinct along with the loss of (radakng) rumah panjang  in West Kalimantan also lost the wealth of Indonesia. The research was conducted to find out the structure of the division of the room from the rumah panjang (radakng) building. A descriptive approach is used to describe parts of the rumah panjang (radakng). The results of the study are rumah panjang (radakng) consisting of Pante (outer terrace), Sami (porch or inner terrace), Bilik (core room of (radakng) longhouse), Jungkar (kitchen) and Dango (barn), there is also a part of the house that does not blend with the core house and each part of the room has a diverse function and rumah panjang as a place of growth of various cultural heritage such as traditional ceremonies, beliefs, dances, musical instruments and gotong royong (community service).

Sign in / Sign up

Export Citation Format

Share Document