Study on Preparation and Properties of Cement-Based Foamed Lightweight Thermal Insulation Material

2011 ◽  
Vol 306-307 ◽  
pp. 994-997
Author(s):  
Cong Cong Jiang ◽  
Guo Zhong Li ◽  
Shui Zhang
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Fly Ash ◽  
Thermal Insulation ◽  
Thermal Conductivity Coefficient ◽  
Steel Slag ◽  
Activation Mechanism ◽  
Dry Density ◽  
Insulation Material ◽  
Thermal Insulation Material

A cement-based foamed lightweight thermal insulation material was prepared with cement, industrial waste (fly ash, steel slag) as the main raw materials, by using self-developed composite activator and foaming agent. The influence of foam content on dry density, compressive strength and thermal conductivity coefficient of material was studied, the activation mechanism of composite activator to fly ash and steel slag was discussed. Results showed that, the dry density and compressive strength of material decreased, and thermal conductivity coefficient decreased first and then increased with the increasing foam content.

scholarly journals Thermal Insulation and Mechanical Properties of Polylactic Acid (PLA) at Different Processing Conditions

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2091
Author(s):  
Mohamed Saeed Barkhad ◽  
Basim Abu-Jdayil ◽  
Abdel Hamid I. Mourad ◽  
Muhammad Z. Iqbal
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Polylactic Acid ◽  
Thermal Insulation ◽  
Annealing Time ◽  
Insulation Material ◽  
Thermal Insulation Material

This work aims to provide an extensive evaluation on the use of polylactic acid (PLA) as a green, biodegradable thermal insulation material. The PLA was processed by melt extrusion followed by compression molding and then subjected to different annealing conditions. Afterwards, the thermal insulation properties and structural capacity of the PLA were characterized. Increasing the annealing time of PLA in the range of 0–24 h led to a considerable increase in the degree of crystallization, which had a direct impact on the thermal conductivity, density, and glass transition temperature. The thermal conductivity of PLA increased from 0.0643 W/(m·K) for quickly-cooled samples to 0.0904 W/(m·K) for the samples annealed for 24 h, while the glass transition temperature increased by approximately 11.33% to reach 59.0 °C. Moreover, the annealing process substantially improved the compressive strength and rigidity of the PLA and reduced its ductility. The results revealed that annealing PLA for 1–3 h at 90 °C produces an optimum thermal insulation material. The low thermal conductivity (0.0798–0.0865 W/(m·K)), low density (~1233 kg/m3), very low water retention (<0.19%) and high compressive strength (97.2–98.7 MPa) in this annealing time range are very promising to introduce PLA as a green insulation material.

Environmentally Friendly Cellular Concrete for Wall Insulation

2013 ◽  
Vol 539 ◽  
pp. 271-275 ◽  
Author(s):  
Ya Qing Jiang ◽  
Jun Yang ◽  
Yun Chen
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Fly Ash ◽  
Mass Density ◽  
Polypropylene Fiber ◽  
Cementitious Materials ◽  
Dry Density ◽  
Insulation Material ◽  
Good Market ◽  
Cellular Concrete

Cellular concrete characterizes low mass density and low thermal conductivity is one of the durable and economic wall insulation materials which have good market prospects. The present paper investigated the composition of ternary cementitious materials, mixture design and production process of cellular concrete panel (CCP). Experimental results indicated that a higher compressive strength of CCP may be obtained by blended PⅡ52.5 Portland cement with pulverized low temperature clinker (PLWC) made of water treatment sludge and fly ash in the mass ratio of 0.70: 0.15: 0.15. CCP with dry density of 226 kg/m3, thermal conductivity of 0.056 W/ (m•K), compressive strength of 0.6 MPa and water absorption ratio of 7.6 vol. % was modified by high range water reducer, polypropylene fiber and water resistant agent. Mathematic models for controlling temperature of mixing water and for calculation quantity of gas forming admixture were established. Insulated moulds were specially designed for taking advantage of hydration heat of cement to speed up moulds turnover. Meanwhile, internal microcrack of CCP was avoided. CCP incorporating PLWC and fly ash may be used as external insulation material of walls.

Research of the Main Influence Factors of Fly Ash Thermal Insulation Material

2010 ◽  
Vol 156-157 ◽  
pp. 839-843
Author(s):  
Jin Xia Zhang ◽  
Yi Miao Nie ◽  
Shi Chao Li ◽  
Fu Sheng Niu
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Thermal Insulation ◽  
Influence Factors ◽  
Raw Material ◽  
Insulation Material ◽  
Thermal Insulation Material ◽  
Solid Liquid ◽  
The Relationship ◽  
Main Influence

By using fly ash as raw material to prepare thermal insulation material in this research. The relationship between the compressive strength and the influence factors was systematically discussed. The compressive strength of the samples reached max when the dosage of silica fume was 5%, sodium hydroxide 40%,the solid-liquid ratio was 0.75 and the content of foam was 4%. The experimental results provided a good basis for manufacturing the thermal insulation material and improving its property.

The Preparation of Red Mud Foam Lightweight Thermal Insulation Material

2014 ◽  
Vol 541-542 ◽  
pp. 104-107
Author(s):  
Long Ma ◽  
Guo Zhong Li
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Thermal Insulation ◽  
Red Mud ◽  
Raw Materials ◽  
Insulation Material ◽  
Test Results ◽  
Sintering Process ◽  
Thermal Insulation Material ◽  
Properties Of Materials

Red mud foam lightweight thermal insulation material was prepared by red mud, fly ash, cement as main raw materials, adding a certain amount of adhesive, through ingredients, mixing, molding, foam, sintering process. The influence of the ratio of red mud and fly ash on the properties of materials was studied and the mechanism of influence was analyzed. The test results show that performances of the samples were best when the ratio of red mud and fly ash is 5:4 and its flexural strength is 0.44MPa, compressive strength is 1.23MPa, density is 481kg/m3.

scholarly journals Preparation and properties of silicate inorganic exterior wall insulation based on thermal energy storage

2020 ◽  
Vol 24 (5 Part B) ◽  
pp. 3109-3118
Author(s):  
Zifan Zhou ◽  
Guofu Tu ◽  
Feng Xu ◽  
Zhaofeng Song ◽  
Na Li
Keyword(s):  
Thermal Conductivity ◽  
Fly Ash ◽  
Thermal Insulation ◽  
Thermal Energy ◽  
Testing Machine ◽  
Insulation Material ◽  
Exterior Wall ◽  
Thermal Insulation Material ◽  
Insulation Materials ◽  
Insulation Performance

The key to building energy conservation is how to make the exterior wall have good thermal insulation performance, reduce the heat loss of the building?s peripheral structure, develop new exterior wall insulation materials, and effectively achieve energy saving. In this paper, a new type of composite silicate insulation material was prepared by using fly ash, sepiolite fiber, basalt fiber, and cement as raw materials. According to the analysis of the action of each component of the composite silicate thermal insulation material, the composite silicate thermal insulation material is prepared by selecting different raw material ratios, and the fly ash and sepiolite fibers are analyzed by a thermal conductivity measuring instrument and a hydraulic universal testing machine. The influence of water-cement ratio on the thermal conductivity, tensile strength, and compressive strength of composite silicate insulation materials. Through research, it is found that this composite silicate exterior wall insulation material utilizes some abandoned resources to help the building exterior wall to store thermal energy. The preparation process is simple, the insulation performance is good, the mechanical strength is high, and there is great promotion value and application prospect.

Influences of Emulsion on Water Resistance of Vitrified Micro Bubbles Thermal Insulation Material

2013 ◽  
Vol 662 ◽  
pp. 433-436
Author(s):  
Jiang Zhu ◽  
Guo Zhong Li
Keyword(s):  
Compressive Strength ◽  
Polyvinyl Alcohol ◽  
Stearic Acid ◽  
Thermal Insulation ◽  
Water Resistance ◽  
Insulation Material ◽  
Molding Process ◽  
Thermal Insulation Material ◽  
Improve Water Resistance ◽  
Softening Coefficient

Vitrified micro bubbles thermal insulation material was made of vitrified micro bubbles, cement, fly ash, gypsum and sodium silicate, by molding process. VAE emulsion and stearic acid-polyvinyl alcohol emulsion were added to improve water resistance of the material. Mixed with 10% VAE emulsion and 5% stearic acid-polyvinyl alcohol emulsion, properties of the material are followed as: flexural strength 0.64MPa, compressive strength 1.35MPa, softening coefficient 0.71 and 2h volumetric water absorption 6.9%.

Effect of Operating Temperatures on Thermal Conductivity of Polystyrene Insulation Material: Impact on Envelope-Induced Cooling Load

2014 ◽  
Vol 564 ◽  
pp. 315-320 ◽  
Author(s):  
Maatouk Khoukhi ◽  
Mahmoud Tahat
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Energy Performance ◽  
Building Envelope ◽  
Insulation Material ◽  
Cooling Load ◽  
Thermal Insulation Material ◽  
Insulation Materials ◽  
Energy Performance Of Buildings ◽  
The Impact

The impact of the thermal conductivity (k-value) change of polystyrene insulation material in building envelope due to changes in temperature on the thermal and energy performance of a typical residential building under hot climate is investigated. Indeed, the thermal and energy performance of buildings depends on the thermal characteristics of the building envelope, and particularly on the thermal resistance of the insulation material used. The thermal insulation material which is determined by its thermal conductivity, which describes the ability of heat to flow cross the material in presence of a gradient of temperature, is the main key to assess the performance of the thermal insulation material. When performing the energy analysis or calculating the cooling load for buildings, we use published values of thermal conductivity of insulation materials, which are normally evaluated at 24°C according to the ASTM standards. In reality, thermal insulation in building is exposed to significant and continuous temperature variations, due essentially to the change of outdoor air temperature and solar radiation. Many types of insulation materials are produced and used in Oman, but not enough information is available to evaluate their performance under the prevailing climatic condition. The main objective of this study is to investigate the relationship between the temperature and thermal conductivity of various densities of polystyrene, which is widely used as building insulation material in Oman. Moreover, the impact of thermal conductivity variation with temperature on the envelope-induced cooling load for a simple building model is discussed. This work will serve as a platform to investigate the effect of the operating temperature on thermal conductivity of other building material insulations, and leads to more accurate assessment of the thermal and energy performance of buildings in Oman.

Preparation and Properties of a Novel Nonflammable Thermal Insulation Material

2012 ◽  
Vol 450-451 ◽  
pp. 1504-1512 ◽  
Author(s):  
Dan Shi ◽  
Ling Shi ◽  
Jun Ying Zhang ◽  
Jue Cheng
Keyword(s):  
Compressive Strength ◽  
Thermal Insulation ◽  
Heat Conductivity ◽  
Sodium Silicate Solution ◽  
Silicate Solution ◽  
Insulation Material ◽  
Material Density ◽  
Thermal Insulation Material ◽  
Blowing Agent ◽  
Coefficient Of Heat Conductivity

A novel nonflammable thermal insulation material for buildings was prepared by foaming sodium silicate solution with blowing agent. The material density is 274 kg/m3,with the compressive strength up to 2.0MPa and the coefficient of heat conductivity low to 0.08 W/ m•K.

A Novel Building Thermal Insulation Material: Expanded Perlite Modified by Aerogel

2011 ◽  
Vol 250-253 ◽  
pp. 507-512
Author(s):  
Zi Sheng Wang ◽  
Hao Chi Tu ◽  
Jin Xiu Gao ◽  
Guo Dong Qian ◽  
Xian Ping Fan ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Mechanical Property ◽  
Thermal Insulation ◽  
Production Cost ◽  
Building Materials ◽  
Low Cost ◽  
Insulation Material ◽  
Expanded Perlite ◽  
Thermal Insulation Material ◽  
Supercritical Fluid Drying

Aerogel is regarded as one kind of super thermal insulation materials which could be large-scalely used as building materials. However, the aerogel’s production cost and poor mechanical property limit the its applications. In this paper, we put forward a new low cost way to produce a novel building thermal insulation material: synthesized the aerogel within the expanded perlite’s pores, and using sodium silicate as precursor without adopting supercritical fluid drying and surface modification. The thermal conductivity of expanded perlite was successfully decreased after modified by aerogel.

Influence of Air Entraining Agent on Performance of Inorganic Thermal Insulating Mortar

2011 ◽  
Vol 71-78 ◽  
pp. 490-493 ◽  
Author(s):  
Zhi Min He ◽  
Jun Zhe Liu ◽  
Tian Hong Wang
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Insulation ◽  
Apparent Density ◽  
Thermal Conductivity Coefficient ◽  
Operating Performance ◽  
Drying Shrinkage ◽  
Test Results ◽  
Thermal Insulating ◽  
Excessive Consumption

This paper presents a laboratory study on the effect of air entraining agent on the performance of thermal insulating mortar with glazed hollow bead. The test results show that with the dosage of air entraining agent increases, the consistency of thermal insulating mortar increases, apparent density, thermal conductivity and drying shrinkage decline, However, the compressive strength greater losses owing to excessive consumption of air entraining agent; air entraining agent within a certain dosage can significantly improve the operating performance of thermal insulation mortar, increase its consistency and reduce its apparent density, thermal conductivity coefficient and drying shrinkage. Due to excessive addition of air entraining agent, the apparent density, thermal conductivity and compressive strength of thermal insulation mortar all increase. For a specific insulation mortar, there will exist the best mixing amount of air entraining agent.

Sign in / Sign up

Export Citation Format

Share Document