Comprehensive Utilization of Agricultural Bean Husk Powder (CA) Beads – The Research and Application of Using Immobilized Method to Adsorb and Purify Lead of Mine Wastewater

2011 ◽  
Vol 356-360 ◽  
pp. 1475-1481
Author(s):  
Guo Xiang Xu ◽  
Wen Bin Chen
Keyword(s):  
Water Quality ◽  
Metal Ion ◽  
Adsorption Process ◽  
Quality Standard ◽  
Ion Concentration ◽  
Water Quality Standards ◽  
Solution Ph ◽  
Mine Wastewater ◽  
Adsorption Treatment ◽  
First Time

In this study, calcium alginate immobilized bean husk powder(CA) beads was used as an adsorbent for the aim of removing Pb(Ⅱ) ions form the aqueous solutions, and the effect of initial solution pH, contact time, temperature, initial metal ion concentrations and ionic strength in the adsorption process were investigated in detail. Experimental results showed that the amount of adsorbed Pb(Ⅱ) increased with the increasing initial metal ion concentration and solution pH in the examined range. The results showed that the optimum adsorption pH for Pb(Ⅱ) was5.5, the uptake was 10. 78 mg/g, the desorption rates of Pb(Ⅱ) by EDTA was calculated as 90 %. The concentration of Pb(Ⅱ)of mine wastewater reach the first class of irrigation water quality standards after the first time of adsorption treatment, and reach the first class of fishery water quality standard after the second treatment.

Situation on of Purifying and Comprehensive Utilizing Mineral Processing Lead Wastewater and its Development Trend in Nonferrous Metal Ore Mining

2011 ◽  
Vol 347-353 ◽  
pp. 1031-1036 ◽  
Author(s):  
Wen Bin Chen
Keyword(s):  
Water Quality ◽  
Ph Value ◽  
Development Trend ◽  
Quality Standard ◽  
Affecting Factors ◽  
Isothermal Adsorption ◽  
Initial Concentration ◽  
Mine Wastewater ◽  
Adsorption Treatment ◽  
First Time

In this study, the affecting factors order of Pb2 + adsorbing Co3O4 is: the initial concentration > time> temperature> pH, under the conditions that initial concentration is 150 mg / L, 30 °C, pH value is 5.5 and oscillation of 60 min, the absorption is the best. The quasi-second order kinetics model can appropriately explain dynamic process of Nano Co3O4 adsorbing Pb2+, and the Langmuir equation can be the best explanation of isothermal adsorption processs. Through energy spectrum and infrared spectrum, it can be found that the process of Co3O4 adsorbing Pb2+ is mainly chemical absorption process. The concentration of Pb (Ⅱ) of mine wastewater reach the first class of irrigation water quality standards after the first time of adsorption treatment, and reach the first class of fishery water quality standard after the second treatment.

Bentonite-Biochar Combination for Manganese Ion Removal from Water

2021 ◽  
Vol 1162 ◽  
pp. 81-86
Author(s):  
Yasdi Yasdi ◽  
Rinaldi Rinaldi ◽  
Wahyu Fajar Winata ◽  
Febri Juita Anggraini ◽  
Ika Yanti ◽  
...  
Keyword(s):  
Contact Time ◽  
Metal Ion ◽  
Room Temperature ◽  
Adsorption Process ◽  
Quality Standard ◽  
Ion Concentration ◽  
Optimum Conditions ◽  
Manganese Ion ◽  
Ion Removal ◽  
Optimum Ph

Peat waters were abundant in the West Tanjung Jabung Regency of Jambi Province. Peat water contains manganese metal ion concentration that exceeds the clean water quality standard. Previous studies have been conducted to reduce levels of manganese in peat water, but the results have not been significant. This study aims to reduce levels of Manganese metal in peat water using the composition of Bentonite and Biochar. The adsorption process was carried out at room temperature (29 °C) with a stirring of 200 rpm. Some parameters measured were optimum pH of adsorption, optimum contact time and the best combination between Bentonite and Biochar. Manganese ion concentration in solution was measured using atomic absorption spectroscopy (AAS). The results of this study indicate that the optimum conditions for removing manganese ion at pH 5 and contact time 40 minutes. Tests on artificial solutions using 0.2 grams of biochar showed Mn ion removal of 42.91% (C0 = 100 mg/L, Ce = 57.09 mg/L, V = 100 mL). The best combination obtained in Bentonite: Biochar (1:2) with a mass of 0.080 gr and 0.170 gr, respectively, which able to remove 91.29% manganese ions in peat water.

Treatment of Chromium-Containing Mine Wastewater with Layered Nanometer Co3O4 Hydroxide

2011 ◽  
Vol 356-360 ◽  
pp. 1482-1487 ◽  
Author(s):  
Guo Xiang Xu ◽  
Wen Bin Chen
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Effect Of Temperature ◽  
Irrigation Water Quality ◽  
Water Quality Standards ◽  
Mine Wastewater ◽  
Adsorption Treatment ◽  
Coexisting Ions

Experiment was made to study heavy metal ion mining wastewater.The effect of Temperature, pH, Initial concentration, coexisting ions and time on the performance of Nanomaterials were investigated. Results showed that removal efficiency of heavy metal ions was higher than 86% after adsorption treatment of containing Cr(VI) mine wastewater, Cr(VI) concentration in permeation liquid was lower than 0.1 mg/L, and the concentration of Cr(VI) ions reaches the first class of irrigation water quality standards , which verified that Nanomaterials is effective for the removal of heavy metal ions, and the concentration liquid can be reclaimed.

The Technological Research and Application of the Adsorption and Purification of Heavy Metal Chromium in Mining Waste Water Using Microbial Immobilization Technology

2011 ◽  
Vol 356-360 ◽  
pp. 1488-1494
Author(s):  
Dong Rui Yao ◽  
Wen Bin Chen
Keyword(s):  
Waste Water ◽  
Heavy Metal ◽  
Adsorption Process ◽  
Ph Value ◽  
Water Quality Standards ◽  
Lead Uptake ◽  
Leptospirillum Ferrooxidans ◽  
Immobilization Technology ◽  
Mine Wastewater ◽  
Adsorption Treatment

The Leptospirillum ferrooxidans which had been selected and cultivated from mine area was applied in treatment of Cr(VI) -containing waste water in the laboratory and real Cr(VI) -containing waste water. The principle of its adsorption process was probed. The results show that the main factors which affect the lead uptake are pH value、ways of pretreatment、contacting time、co-existing ions、Leptospirillum ferrooxidans concentration insolutions,etc.It was able to adsorb Cr(VI) efficiently.After adsorption steps of the treatment, the concentration of heavy metal Cr(VI) in solution met the standard for treating waste water. After adsorption treatment of containing chromium mine wastewater, the concentration of chromium ions reaches the first class of irrigation water quality standards.

Analysis of Chemical Properties and Heavy Metals from Cisadane River, Tangerang, Indonesia

2021 ◽  
Vol 18 (1) ◽  
pp. 81-87
Author(s):  
Desy Rosarina ◽  
Ellysa Kusuma Laksanawati ◽  
Dewi Rosanti
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Chemical Properties ◽  
Data Retrieval ◽  
Quality Standards ◽  
Class Ii ◽  
Quality Standard ◽  
Water Quality Standards ◽  
Water Quality Standard ◽  
A Value

This paper explained heavy metals and chemical properties from the Cisadane River in Tangerang City. A survey method was used to determine the place for sampling the test material. Water measurement is carried out in situ and laboratory tests. Data retrieval was done by purposive sampling determining three observation stations, namely in the Taman Gajah Tunggal park area (station1), Babakan Cikokol residential area (station 2), and Karawaci paper mill area (station 3). The analysis was carried out exactly using analysis. Namely, analysis carried out in the laboratory. The parameters observed were COD, phosphate, DO, BOD, pH. Results of this study informed the water quality in the Cisadane City river did not meet Class II Water Quality Standards based on Government Regulation Number 82, the year 2001. The COD content only meets class II water quality standards at stations 1 and 3. BOD and phosphate content is high and exceeds class II water quality standards. Heavy metal content still meets the water quality standard threshold with a value of Cd less than 0.01 mg/L, Cu less than 0.02 mg/L, Pb less than 0.03mg/L, and Cr less than 0.05mg/L. Zn content exceeds the water quality standard threshold at station three and meets water quality standards at stations 1 and 2 with a value of less than 0.05mg/L.

Application of Circulator Clarifier + Gravity Valve-Less Filtrate in the Disposal of Coal Mine Wastewater

2012 ◽  
Vol 518-523 ◽  
pp. 2366-2369
Author(s):  
Qun Ying Zhao ◽  
Yu Shu Wang ◽  
Xiao Li Fan
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
Engineering Design ◽  
Environmental Quality ◽  
Coal Mine ◽  
Sewage Treatment ◽  
Quality Standard ◽  
Environmental Quality Standard ◽  
Mine Wastewater ◽  
Water Environmental Quality

The characteristic of coal mine wastewater was introduced. Engineering design and practical run of circulator clarifier +gravity valve-less were summed up for treating wastewater of coal mine. Practice indicated that the process was steady and reliable, the effluent satisfied water quality Ⅲ standard of Surface Water Environmental Quality Standard (GB3838-2002),and there was remarkable economic results during the process of sewage treatment.

Considerations on methodological challenges for water footprint calculations

2012 ◽  
Vol 65 (7) ◽  
pp. 1258-1264 ◽  
Author(s):  
S. Thaler ◽  
M. Zessner ◽  
F. Bertran De Lis ◽  
N. Kreuzinger ◽  
R. Fehringer
Keyword(s):  
Water Quality ◽  
Sugar Beet ◽  
Water Footprint ◽  
Quality Standard ◽  
Simple Approach ◽  
Green Water ◽  
Special Focus ◽  
Water Usage ◽  
Water Quality Standards ◽  
Further Development

We have investigated how different approaches for water footprint (WF) calculations lead to different results, taking sugar beet production and sugar refining as examples. To a large extent, results obtained from any WF calculation are reflective of the method used and the assumptions made. Real irrigation data for 59 European sugar beet growing areas showed inadequate estimation of irrigation water when a widely used simple approach was used. The method resulted in an overestimation of blue water and an underestimation of green water usage. Dependent on the chosen (available) water quality standard, the final grey WF can differ up to a factor of 10 and more. We conclude that further development and standardisation of the WF is needed to reach comparable and reliable results. A special focus should be on standardisation of the grey WF methodology based on receiving water quality standards.

scholarly journals Kualitas Air Tanah di Sekitar TPA Km 14 Kota Palangka Raya

2020 ◽  
Vol 1 (1) ◽  
pp. 75-82
Author(s):  
Yustani Leluno ◽  
Kembarawati ◽  
Basuki
Keyword(s):  
Water Quality ◽  
Water Distribution ◽  
Government Regulation ◽  
Quality Standards ◽  
Quality Standard ◽  
Water Quality Standards ◽  
Processing Site ◽  
Local Water

The lack of clean water distribution by local water service (PDAM) of Palangka Raya city is the major reason for people around the final processing site/landfill (Tempat Pemrosesan Akhir) at Km 14 to use groundwater for their daily life. The landfill may cause pollution over groundwater known as leachate, which commonly unnoticed by its users. This study aims at assessing the quality of groundwater in that area. The groundwater was taken at different distances from the site in three rainless-days. The physical, chemical and biology parameters of groundwater are observed in the field (in situ) and analyzed in the laboratory, refers to water quality standard of Class I, according to Government Regulation No. 82 of 2001 and Minister of Health Regulation No. 32 of 2017. Public opinion on that issue is cached through interview. The results showed that the groundwater around the landfill in three rainless-days was harmless to be consumed as drinking water, and did not exceed the water quality standards stipulated by government in term of odorless, tasteless, and colorless. Some indicators also show that the groundwater meets the specified quality standards, i.e. TDS (17-68.14 mg/L), DHL (17,15-69.39 ?s), turbidity (0.11-2.50 mg/L), iron (0.227-0.71 mg/L), manganese (<0.0123-0.02 mg/L), coliform (<1.8-280 MPN/100 ml), while Pb and H2S were not detected. From community side, there are no any health complaints arise as long as they use the water.

scholarly journals (3-Aminopropyl) Triethoxysilane (APTES) Functionalized Magnetic Nanosilica Graphene Oxide (MGO) Nanocomposite for the Comparative Adsorption of the Heavy Metal (Pb(II), Cd(II) and Ni(II)) ions from Aqueous Solution

2021 ◽  
Author(s):  
C Donga ◽  
S Mishra ◽  
A Aziz ◽  
L Ndlovu ◽  
A Kuvarega ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Graphene Oxide ◽  
Metal Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Solution Ph ◽  
Magnetic Graphene Oxide ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Adsorption Equilibrium Data

Abstract (3-aminopropyl) triethoxysilane (APTES) modified magnetic graphene oxide was synthesized and applied in the adsorption of three heavy metals, Pb(II), Cd(II) and Ni(II) from aqueous solution. An approach to prepare magnetic GO was adopted by using (3-aminopropyl) triethoxysilane (APTES) as a functionalizing agent on magnetic nanosilica coupled with GO to form the Fe3O4@SiO2-NH2/GO nanocomposite. FT-IR, XRD, BET, UV, VSM, SAXS, SEM and TEM were used to characterize the synthesized nanoadsorbents. Batch adsorption studies were conducted to investigate the effect of solution pH, initial metal ion concentration, adsorbent dosage and contact time. The maximum equilibrium time was found to be 30 min for Pb(II), Cd(II) and 60 min for Ni(II). The kinetics studies showed that the adsorption of Pb(II), Cd(II) and Ni(II) onto Fe3O4@SiO2-NH2/GO followed the pseudo-second-order kinetics. All the adsorption equilibrium data were well fitted to Langmuir isotherm model and maximum monolayer adsorption capacity for Pb(II), Cd(II) and Ni(II) were 13.46, 18.58 and 13.52 mgg-1, respectively. The Fe3O4@SiO2-NH2/GO adsorbents were reused for at least 7 cycles without the leaching of mineral core, showing the enhanced stability and potential application of Fe3O4@SiO2-NH2/GO adsorbents in water/wastewater treatment.

scholarly journals Optimisation and Modelling of Pb (II) and Cu (II) Biosorption onto Red Algae (Gracilaria changii) by Using Response Surface Methodology

Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2325 ◽  
Author(s):  
Mubeen Isam ◽  
Lavania Baloo ◽  
Shamsul Rahman Mohamed Kutty ◽  
Saba Yavari
Keyword(s):  
Response Surface Methodology ◽  
Metal Ions ◽  
Response Surface ◽  
Metal Ion ◽  
Ion Concentration ◽  
Solution Ph ◽  
Gracilaria Changii ◽  
Red Macroalgae ◽  
Removal Of Metal ◽  
Removal Of Metal Ions

The removal of Pb (II) and Cu (II) ions by using marine red macroalgae (Gracilaria changii) as a biosorbent material was evaluated through the batch equilibrium technique. The effect of solution pH on the removal of metal ions was investigated within the range of 2–7. The response surface methodology (RSM) technique involving central composite design (CCD) was utilised to optimise the three main sorption parameters, namely initial metal ion concentration, contact time, and biosorbent dosage, to achieve maximum ion removal. The models’ adequacy of response was verified by ANOVA. The optimum conditions for removal of Pb (II) and Cu (II) were as follows: pH values of 4.5 and 5, initial concentrations of 40 mg/L, contact times of 115 and 45 min, and biosorbent dosage of 1 g/L, at which the maximum removal percentages were 96.3% and 44.77%, respectively. The results of the adsorption isotherm study showed that the data fitted well with the Langmuir’s model for Pb (II) and Cu (II). The results of the adsorption kinetic study showed that the data fitted well with the pseudo-second order model for Pb (II) and Cu (II). In conclusion, red alga biomass exhibits great potential as an efficient low-cost sorbent for removal of metal ions.

Sign in / Sign up

Export Citation Format

Share Document