Effect of Oxygen Flow Rate on the Properties of Nanocolumnar ZnO Thin Films Prepared Using Radio Frequency Magnetron Sputtering System for Ultraviolet Sensor Applications

2011 ◽  
Vol 364 ◽  
pp. 1-6 ◽  
Author(s):  
Mohamad Hafiz Mamat ◽  
Syafinaz Wan Anwar Wan ◽  
Mohamed Zahidi Musa ◽  
Zuraida Khusaimi ◽  
Mohd Firdaus Malek ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Oxygen Flow Rate ◽  
Oxygen Flow ◽  
Zno Thin Films ◽  
Zno Thin Film ◽  
Flow Rates ◽  
Sensor Applications ◽  
Ultraviolet Sensor ◽  
Sputtering System

Nanostructured zinc oxide (ZnO) thin films were deposited on glass substrates using radio frequency (RF) magnetron sputtering system at different oxygen flow rates ranges between 0 to 40 sccm. Field emission scanning electron microscopy (FESEM) images was revealed that nanocolumnar ZnO structure thin films are produced on the substrates using high purity ZnO as the target at RF power of 250 W in the argon and oxygen gas mixture ambient. The XRD spectra reveal that the deposited films are preferentially grown along the c-axis indicating high ZnO crystallinity. The ultraviolet-visible (UV-Vis) spectra show that all samples are very transparent in the visible region (400 – 800 nm) with average transparency above 80 %. The photocurrent properties indicate that ZnO thin film prepared at oxygen flow rate of 20 sccm has the optimum characteristic for ultraviolet sensor applications. This finding suggested that the oxygen flow rates play important role and has critical value for semiconducting nanocolumnar ZnO growth in the sputtering system, which can produce ZnO thin film with high sensitivity of ultraviolet detection.

scholarly journals Effects of Thermal Annealing on the Characteristics of High Frequency FBAR Devices

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 397
Author(s):  
Yu-Chen Chang ◽  
Ying-Chung Chen ◽  
Bing-Rui Li ◽  
Wei-Che Shih ◽  
Jyun-Min Lin ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Thermal Annealing ◽  
Electromechanical Coupling ◽  
Zno Thin Films ◽  
Electromechanical Coupling Coefficient ◽  
Back Side ◽  
Zno Thin Film ◽  
Frequency Responses ◽  
Sputtering System

In this study, piezoelectric zinc oxide (ZnO) thin film was deposited on the Pt/Ti/SiNx/Si substrate to construct the FBAR device. The Pt/Ti multilayers were deposited on SiNx/Si as the bottom electrode and the Al thin film was deposited on the ZnO piezoelectric layer as the top electrode by a DC sputtering system. The ZnO thin film was deposited onto the Pt thin film by a radio frequency (RF) magnetron sputtering system. The cavity on back side for acoustic reflection of the FBAR device was achieved by KOH solution and reactive ion etching (RIE) processes. The crystalline structures and surface morphologies of the films were analyzed by X-ray diffraction (XRD) and field emission scanning electron microscope (FE-SEM). The optimized as-deposited ZnO thin films with preferred (002)-orientation were obtained under the sputtering power of 80 W and sputtering pressure of 20 mTorr. The crystalline characteristics of ZnO thin films and the frequency responses of the FBAR devices can be improved by using the rapid thermal annealing (RTA) process. The optimized annealing temperature and annealing time are 400 °C and 10 min, respectively. Finally, the FBAR devices with structure of Al/ZnO/Pt/Ti/SiNx/Si were fabricated. The frequency responses showed that the return loss of the FBAR device with RTA annealing was improved from −24.07 to −34.66 dB, and the electromechanical coupling coefficient (kt2) was improved from 1.73% to 3.02% with the resonance frequency of around 3.4 GHz.

Effect of Oxygen Flow Rate on the Characteristics of RF Sputtered ZnO Thin Films

2021 ◽  
Vol 903 ◽  
pp. 91-97
Author(s):  
Pathan Parhana ◽  
M.V. Lakshmaiah
Keyword(s):  
Thin Films ◽  
Flow Rate ◽  
Oxygen Flow Rate ◽  
Oxygen Flow ◽  
Zno Thin Films ◽  
Visible Range ◽  
Zno Films ◽  
Flow Rates ◽  
X Ray ◽  
Effect Of Oxygen

Zinc Oxide (ZnO) thin films were deposited on glass substrate by radio frequency (RF)reactive magnetron sputtering technique at variable Oxygen flow rates while Argon flow rates waskept constant. The effect of oxygen flow rate on structural, electrical, optical properties of nanostructured ZnO thin films were investigated by X-ray diffractometer, scanning eletron microscopy(SEM), Hall effect measurements and UV-Visible spectrophotometer. X-ray diffraction (XRD) datareveals films are polycrystalline hexagonal structure with (002) peak as a preferred orientation andcrystallite size was found to be in range12 nm-16 nm.The electrical resistivity of films decreasesfrom 10-1 Ω-cm to 10-2 Ω-cm. All deposited ZnO thin films shows high transmittance above 95% inthe visible range 360 nm-800 nm. The optical band gap and refractive indices have been calculatedusing UV-Vis transmission spectra. Oxygen gas flow rates found to have large impact onoptoelectronic properties of ZnO films.

Study on Effects of Hydrogen Flow Rates on the Properties of ZnO Thin Film Deposited by Facing Targets Sputtering System

2013 ◽  
Vol 52 (11S) ◽  
pp. 11NB01 ◽  
Author(s):  
Hye Ran Kim ◽  
Long Wen ◽  
Su Bong Jin ◽  
Yoon Seok Choi ◽  
In Sik Choi ◽  
...  
Keyword(s):  
Thin Film ◽  
Zno Thin Film ◽  
Flow Rates ◽  
Hydrogen Flow ◽  
Sputtering System

Plasma Pre-Treatment of Polyethylene Terephthalate Substrate Influence on the Properties of ZnO Thin Film

2014 ◽  
Vol 895 ◽  
pp. 41-44
Author(s):  
Seiw Yen Tho ◽  
Kamarulazizi Ibrahim
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Polyethylene Terephthalate ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Zno Thin Films ◽  
Zno Thin Film ◽  
Water Contact ◽  
Pre Treatment ◽  
Pet Substrate

In this work, the influences of plasma pre-treatment on polyethylene terephthalate (PET) substrate to the properties of ZnO thin film have been carried out. ZnO thin films were successfully grown on PET substrate by spin coating method. In order to study the effects of plasma pre-treatment, a comparison of treated and untreated condition was employed. Water contact angle measurement had been carried out for PET wettability study prior to ZnO thin film coating. Morphology study of ZnO thin film was performed by scanning probe microscope (SPM). Besides, optical study of the ZnO thin film was done by using UV-vis spectrophotometer. All the measured results show that plasma pre-treatment of PET substrate plays an important role in enhancing the wettability of PET and optical properties of the ZnO thin films. In conclusion, pre-treatment of PET surface is essential to produce higher quality ZnO thin film on this particular substrate in which would pave the way for the integration of future devices.

Enhanced UV Photon-response of Tin Nano Cluster Loaded- laser Irradiated ZnO Thin film detector

2011 ◽  
Vol 1288 ◽  
Author(s):  
Rashmi Menon ◽  
K. Sreenivas ◽  
Vinay Gupta
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Magnetron Sputtering ◽  
Surface States ◽  
Response Speed ◽  
Rf Magnetron Sputtering ◽  
Fast Response ◽  
Zno Thin Films ◽  
Zno Thin Film ◽  
Photo Response

ABSTRACTZinc Oxide (ZnO), II-VI compound semiconductor, is a promising material for ultraviolet (UV) photon sensor applications due to its attractive properties such as good photoconductivity, ease processing at low temperatures and excellent radiation hardness. The rf magnetron sputtering is a suitable deposition technique due to better control over stoichiometry and deposition of uniform film. Studies have shown that the presence of surface defects in ZnO and subsequently their passivation are crucial for enhanced photo-response characteristics, and to obtain the fast response speed. Worldwide efforts are continuing to develop good quality ZnO thin films with novel design structures for realization of an efficient UV photon sensor. In the present work, UV photon sensor is fabricated using a ZnO thin films deposited by rf magnetron sputtering on the corning glass substrate. Photo-response, (Ion/Ioff) of as-grown ZnO film of thickness 100 nm is found to be 3×103 with response time of 90 ms for UV intensity of 140 μW/cm2 (λ = 365 nm). With irradiation on ZnO thin film by pulsed Nd:YAG laser (forth harmonics 266 nm), the sensitivity of the UV sensor is found to enhance. The photo-response increases after laser irradiation to 4x104 with a fast response speed of 35 ms and attributed to the change in surface states and the native defects in the ZnO thin film. Further, enhancement in the ultraviolet (UV) photo-response (8×104) of detector was observed after integrating the nano-scale islands of Sn metal on the surface of laser irradiated ZnO thin film.

ELECTRICAL AND OPTICAL PROPERTIES OF ZnO THIN FILMS PREPARED BY R.F. MAGNETRON SPUTTERING

2011 ◽  
Vol 25 (20) ◽  
pp. 2741-2749 ◽  
Author(s):  
J. C. ZHOU ◽  
L. LI ◽  
L. Y. RONG ◽  
B. X. ZHAO ◽  
Y. M. CHEN ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Optical Properties ◽  
Magnetron Sputtering ◽  
Oxide Thin Film ◽  
Zno Thin Films ◽  
Zno Thin Film ◽  
Electrical And Optical Properties ◽  
Axis Orientation ◽  
Sputtering Power

High transparency and conductivity of transparent conducting oxide thin film are very important for improving the efficiency of solar cells. ZnO thin film is a better candidate for transparent conductive layer of solar cell. N-type ZnO thin films were prepared by radio-frequency magnetron sputtering on glass substrates. ZnO thin films underwent annealing treatment after deposition. The influence of the sputtering power on the surface morphology, the electrical and optical properties were studied by AFM, XRD, UV2450 and HMS-3000. The experimental results indicate that the crystal quality of ZnO thin film is improved and all films show higher c-axis orientation with increasing sputtering power from 50 to 125 W. The average transparency of ZnO thin films is higher than 90% in the range of 400–900 nm between the sputtering power of 50–100 W. After the rapid thermal annealing at 550°C for 300 s under N2 ambient, the minimum resistivity reach to 10-2Ω⋅ cm .

scholarly journals Effect of Oxygen Flow Rate on Fabrication of ZnO Thin Films Using Cold He Plasma at Atmospheric Pressure

2008 ◽  
Vol 74 (10) ◽  
pp. 1097-1100 ◽  
Author(s):  
Yoshifumi SUZAKI ◽  
Atsuo OBIKA ◽  
Tomokazu SHIKAMA ◽  
Seiki EJIMA
Keyword(s):  
Thin Films ◽  
Flow Rate ◽  
Atmospheric Pressure ◽  
Oxygen Flow Rate ◽  
Oxygen Flow ◽  
Zno Thin Films ◽  
Effect Of Oxygen

Effect of RF Power on the Formation and Morphology Evolution of ZnO Nanostructured Thin Films

2012 ◽  
Vol 576 ◽  
pp. 577-581 ◽  
Author(s):  
N.D.M. Sin ◽  
Mohamad Hafiz Mamat ◽  
Mohamed Zahidi Musa ◽  
S. Ahmad ◽  
A. Abdul Aziz ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Structural Properties ◽  
Zno Thin Films ◽  
Morphology Evolution ◽  
Zno Thin Film ◽  
Rf Power ◽  
Nanostructured Thin Films ◽  
Atomic Force ◽  
Current Voltage

The effect of RF power on the formation and morphology evolution of ZnO nanostructured thin films deposited by magnetron sputtering are presented. This project focused on electrical, optical and structural properties of ZnO thin films. The effect of variation of RF power at 50 watt-250 watt at 200 °C on glass substrate of the ZnO thin films was investigated. The thin films were examined for electrical properties and optical properties using two point probe current-voltage (I-V) measurement (Keithley 2400) and UV-Vis-NIR spectrophotometer (JASCO 670) respectively. The structural properties were characterized using field emission scanning electron microscope (FESEM) (JEOL JSM 7600F) and atomic force microscope (AFM) (Park System XE-100). The IV measurement indicated that at RF power 200 watt the conductivity of ZnO thin film show the highest. All films show high UV absorption properties using UV-VIS spectrophotometer (JASCO 670). The root means square (rms) roughness for ZnO thin film were about 4 nm measured using AFM. The image form FESEM observed that transformation of structure size started to change as the RF power increase.

Effects of Oxygen Flow Rate on Nanostructured ZnO Thin Films

2013 ◽  
Vol 667 ◽  
pp. 333-337
Author(s):  
S. Ahmad ◽  
N.D. Md Sin ◽  
M.N. Berhan ◽  
Mohamad Rusop Mahmood
Keyword(s):  
Thin Films ◽  
Flow Rate ◽  
Volume Ratio ◽  
Rf Magnetron Sputtering ◽  
Deposition Process ◽  
Oxygen Flow Rate ◽  
Oxygen Flow ◽  
Zno Thin Films ◽  
Average Thickness ◽  
X Ray

Zinc Oxide (ZnO) thin films were deposited on thermally oxidized SiO2 by varying the oxygen flow rate. The deposition process were done using radio frequency (RF) magnetron sputtering at various oxygen flow rate ranging from 0 to 40 sccm. The surface morphology and crystallinity were analyzed by field emission scanning electron microscopy (FESEM) and X-Ray Diffractometer (XRD) respectively. The average thickness and deposition rate decreases with an increase of oxygen content. The grain size was measured by FESEM and it was found that it is also decreasing with the increased of oxygen flow rate. The films grown with 10 sccm oxygen shows the highest (002) peak however it is expected that the sample deposited with 40 sccm oxygen exhibit the highest sensitivity toward NH3 gas due to the highest surface to volume ratio.

Silver Doped Zinc Oxide Thin Film Production by Thermionic Vacuum Arc (TVA) Technique

2021 ◽  
Vol 43 (3) ◽  
pp. 253-253
Author(s):  
Mehmet zkan Mehmet zkan ◽  
Sercen Sadik Erdem Sercen Sadik Erdem
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Zinc Oxide ◽  
Band Gap ◽  
Glass Substrate ◽  
Zno Thin Films ◽  
Vacuum Arc ◽  
Zno Thin Film ◽  
Doped Zno ◽  
Thermionic Vacuum Arc

In this paper, silver (Ag)doped Zinc Oxide(ZnO) thin films were prepared on glass and silicon substrate by using a thermionic vacuum arc technique. The surface, structural, optical characteristics of silver doped thin films have been examined by X-Ray diffractometer (XRD), field emission scanning emission electron microscopy (FESEM), atomic force microscopy (AFM), and UV-Visible spectrophotometer. As a result of these measurements, Ag, Zn and ZnO reflection planes were determined for thin films formed on Si and glass substrate. Nano crystallites have emerged in FESEM and AFM images. The produced films have low transparency. The optical band gap values were measured by photoluminescence devices at room temperature for thin films produced on silicon and glass substrate. The band gap values are very close to 3.10 eV for Ag doped ZnO thin films. The band gap of un-doped ZnO thin film is approximately 3.3 eV. It was identified that Ag doped changes the properties of the ZnO thin film.

Sign in / Sign up

Export Citation Format

Share Document