Study on the Calamine/Sodium Alginate Modified Viscose Fiber

2011 ◽  
Vol 418-420 ◽  
pp. 192-195
Author(s):  
Dong Qi Liu ◽  
Ying Liu ◽  
Shu Fa Han ◽  
Yu Feng Zhang ◽  
Cui Yu Yin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Sodium Alginate ◽  
Mechanical Performance ◽  
Viscose Fiber ◽  
Alginate Solution ◽  
Fiber Properties ◽  
Injection Methods ◽  
The Stability ◽  
Scanning Electron

In this article we successfully prepared calamine / sodium alginate viscose fiber. Good dispersion and stability of the modified solution was prepared by dispersing calamine in alkaline solution of sodium alginate, and then mixed it with viscose spinning solution by spinning injection methods. Moreover, the stability of calamine / sodium alginate solution, the effect of concentration of calamine on the fiber properties is studied in this paper. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and physical mechanical performance are test to characterize the structure and the performance of the calamine / sodium alginate viscose fiber.

A new species of Cribraria (Myxomycetes) from Australia

2018 ◽  
Vol 52 (2) ◽  
pp. 379-385 ◽  
Author(s):  
S. L. Stephenson ◽  
Yu. K. Novozhilov ◽  
P. Wellman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
New Species ◽  
Lemon Yellow ◽  
Moist Chamber ◽  
Light Yellow ◽  
Dark Violet ◽  
The Stability ◽  
A New Species ◽  
Scanning Electron

A new species of Cribraria, described herein as C. bicolor, appeared in moist chamber cultures on samples of the bark of Eucalyptus sp. collected at two localities in Australia. The morphology of representative specimens was examined by light and scanning electron microscopy, and micrographs of relevant morphological details of sporocarps and spores are provided. The species has a number of distinct and unique morphological features, including a glossy bright-violet globose sporotheca and a two-colored long stalk which is bright-red over the lower one-third and light yellow or lemon-yellow over the upper two-thirds. The combination of these characteristics as well as a shallow calyculus which is dark-violet when viewed under a dissecting microscope and bright red in transmitted light when mounted in lactophenol makes C. bicolor a well-defined morphospecies when compared to all other species of Cribraria. The stability of the taxonomic characters of the species was confirmed by an examination of a number of specimens.

scholarly journals The force effects of two types of polyethylene terephthalate glyc-olmodified clear aligners immersed in artificial saliva

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Biao Xiang ◽  
Xingxing Wang ◽  
Gang Wu ◽  
Yichen Xu ◽  
Menghan Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Polyethylene Terephthalate ◽  
Artificial Saliva ◽  
Orthodontic Force ◽  
The Mean ◽  
The Stability ◽  
Scanning Electron

AbstractNumerous factors can influence the force exerted by clear aligners on teeth. This study aimed to investigate the stability of the force delivered by two different material appliances. 90 clear aligners with 2 materials and three different activations were designed and fabricated. Then, a device was employed to measure the force generated by the two types of PET-G material appliances immersed in artificial saliva for 0, 3, 7, 10, 14 days. Scanning electron microscopy was applied to observe the morphologic alterations on the aligner surfaces, respectively. The forces generated by different activation appliance exhibited differently, 0.0 mm < 0.1 mm < 0.2 mm. In addition, increasing the immersion times and the orthodontic force also decreased, but the forces decreased differently. Compared with the forces of conventional PETG appliances with 0.20 mm activation, the modified PETG appliances with the same activation exhibited significantly higher mean force. When comparing the mean force for modified PETG appliances after 10 and 14 days with conventional PETG appliances, the delivery forces exhibited significant differences (P < 0.05). The force delivered by both materials decreased obviously following artificial saliva immersion, and the force generated by modified aligners exhibited better stability than conventional aligners.

scholarly journals Design and Characterization of Microscale Auxetic and Anisotropic Structures Fabricated by Multiphoton Lithography

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 446
Author(s):  
Ioannis Spanos ◽  
Zacharias Vangelatos ◽  
Costas Grigoropoulos ◽  
Maria Farsari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mechanical Performance ◽  
Element Analysis ◽  
Mechanical Responses ◽  
Multiphoton Lithography ◽  
Anisotropic Structures ◽  
Scanning Electron

The need for control of the elastic properties of architected materials has been accentuated due to the advances in modelling and characterization. Among the plethora of unconventional mechanical responses, controlled anisotropy and auxeticity have been promulgated as a new avenue in bioengineering applications. This paper aims to delineate the mechanical performance of characteristic auxetic and anisotropic designs fabricated by multiphoton lithography. Through finite element analysis the distinct responses of representative topologies are conveyed. In addition, nanoindentation experiments observed in-situ through scanning electron microscopy enable the validation of the modeling and the observation of the anisotropic or auxetic phenomena. Our results herald how these categories of architected materials can be investigated at the microscale.

Identification of Nd163 phase in melt-textured NdBa2Cu3O7−δ bulk samples

2003 ◽  
Vol 18 (9) ◽  
pp. 2050-2054 ◽  
Author(s):  
Marcello Gombos ◽  
Vicente Gomis ◽  
Anna Esther Carrillo ◽  
Antonio Vecchione ◽  
Sandro Pace ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Microscopy ◽  
Room Temperature ◽  
Polarized Light ◽  
Energy Dispersive ◽  
X Ray ◽  
Spontaneous Formation ◽  
The Stability ◽  
Scanning Electron

In this work, we report on the observation of Nd1Ba6Cu3O10,5 (Nd163) phase of the NdBaCuO system in melt-textured Nd123 bulk samples grown from a mixture of Nd123 and Nd210 phase powders. The observation was performed with polarized light optical microscopy and scanning electron microscopy–energy dispersive x-ray analyses. Images of the identified phase crystals show an aspect quite different from Nd422 crystals. Unexpectedly, Nd163 was individuated, even in “pure” Nd123 samples. Moreover, after long exposure to air, Nd163 disappeared completely in samples synthesized from powders containing Nd210. Thermogravimetry analyses of powders show that the stability of this phase in air is limited to temperatures higher than 900 °C, so Nd163 is unstable and highly reactive at room temperature. Moreover, an explanation of the observation of Nd163 in Nd210 free samples, based on the spontaneous formation of Nd163 phase in a Nd123 melt, is proposed.

Hierarchical Design and Nanomechanics of the Calcified Byssus of Anomia simplex

2009 ◽  
Vol 1187 ◽  
Author(s):  
Jakob R Eltzholtz ◽  
Marie Krogsgaard ◽  
Henrik Birkedal
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Mechanical Performance ◽  
Blue Mussel ◽  
Hierarchical Design ◽  
Reduced Modulus ◽  
Different Types ◽  
Microscopy Images ◽  
Scanning Electron

AbstractBiology has evolved several strategies for attachment of sedentary animals. In the bivalves, byssi abound and the best known example being the protein-based byssus of the blue mussel and other Mytilidae. In contrast the bivalve Anomia sp. has a single calcified thread. The byssus is hierarchical in design and contains several different types of structures as revealed by scanning electron microscopy images. The mechanical properties of the byssus are probed by nanoindentation. It is found that the mineralized part of the byssus is very stiff with a reduced modulus of about 67 GPa and a hardness of ˜3.7 GPa. This corresponds to a modulus roughly 20% smaller than that of pure calcite and a hardness that is about 20% larger than pure calcite. The results reveal the importance of microstructure on mechanical performance.

scholarly journals SODIUM ALGINATE/GELATIN MICROBEADS-INTERCALATED WITH KAOLIN NANOCLAY FOR EMERGING DRUG DELIVERY IN WILSON’S DISEASE

2019 ◽  
pp. 71-80 ◽  
Author(s):  
O. SREEKANTH REDDY ◽  
M. C. S. SUBHA ◽  
T. JITHENDRA ◽  
C. MADHAVI ◽  
K. CHOWDOJI RAO ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Drug Release ◽  
Ftir Spectroscopy ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Vitro Release ◽  
Scanning Electron

Objective: The aim of the present study was to fabricate and evaluate the drug release studies using Sodium Alginate (SA) and Gelatin (GE) microbeads intercalated with Kaolin (KA) nanoclay for sustained release of D-Penicillamine (D-PA). Methods: Sodium alginate/gelatin/Kaolin blend microbeads were prepared by an extrusion method by using glutaraldehyde (GA) as a crosslinker. The obtained microbeads were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X–ray diffraction (XRD). Drug release kinetics of the microbeads was investigated in simulated intestinal fluid (pH 7.4) at 37 °C. Results: Microbeads formation was confirmed by FTIR spectroscopy. X-RD reveals that the KA should be intercalated with the drug and also it confirms the molecular level dispersion of D-Penicillamine into microbeads. Scanning Electron Microscopy (SEM) studies reveal that the beads were in spherical shape with some wrinkled depressions on the surface. The in vitro release study indicates the D-Penicillamine released in a controlled manner. The in vitro release kinetics was assessed by Korsmeyer-Peppas equation and the ‘n’ value lies in between 0.557-0.693 indicates Non-Fickian diffusion process. Conclusion: The results suggest that the developed KA intercalated microbeads are good potential drug carrier for the controlled release of D-PA.

scholarly journals New crosslinkers for electrospun chitosan fibre mats. I. Chemical analysis

2012 ◽  
Vol 9 (75) ◽  
pp. 2551-2562 ◽  
Author(s):  
Marjorie S. Austero ◽  
Amalie E. Donius ◽  
Ulrike G. K. Wegst ◽  
Caroline L. Schauer
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Mechanical Stability ◽  
Dissolution Tests ◽  
Natural Polysaccharide ◽  
Biomedical Field ◽  
The Stability ◽  
Scanning Electron

Chitosan (CS), the deacetylated form of chitin, the second most abundant, natural polysaccharide, is attractive for applications in the biomedical field because of its biocompatibility and resorption rates, which are higher than chitin. Crosslinking improves chemical and mechanical stability of CS. Here, we report the successful utilization of a new set of crosslinkers for electrospun CS. Genipin, hexamethylene-1,6-diaminocarboxysulphonate (HDACS) and epichlorohydrin (ECH) have not been previously explored for crosslinking of electrospun CS. In this first part of a two-part publication, we report the morphology, determined by field emission scanning electron microscopy (FESEM), and chemical interactions, determined by Fourier transform infrared microscopy, respectively. FESEM revealed that CS could successfully be electrospun from trifluoroacetic acid with genipin, HDACS and ECH added to the solution. Diameters were 267 ± 199 nm, 644 ± 359 nm and 896 ± 435 nm for CS–genipin, CS–HDACS and CS–ECH, respectively. Short- (15 min) and long-term (72 h) dissolution tests (T 600 ) were performed in acidic, neutral and basic pHs (3, 7 and 12). Post-spinning activation by heat and base to enhance crosslinking of CS–HDACS and CS–ECH decreased the fibre diameters and improved the stability. In the second part of this publication, we report the mechanical properties of the fibres.

Characterization of Glue Sizing Layers in Portuguese Wood Paintings from the 15th and 16th Centuries by SEM Secondary Electron Images and μ-FTIR

2013 ◽  
Vol 20 (1) ◽  
pp. 66-71 ◽  
Author(s):  
Vanessa Antunes ◽  
Maria J.Oliveira ◽  
Helena Vargas ◽  
António Candeias ◽  
Ana Seruya ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Secondary Electron ◽  
16Th Century ◽  
Animal Glue ◽  
Precise Characterization ◽  
The Stability ◽  
Scanning Electron

AbstractAccording to treatises on 15th and 16th century paintings, artists dedicated particular attention to the sizing layer—consisting mainly of animal glue applied onto the wood support before further application of the ground layer. The stability of a painting mainly depends on the presence of a very cohesive sizing layer. However, the study of these layers has not received special attention from researchers. In this article we present a methodology for characterization of the sizing layer both chemically, by IR spectroscopy (Fourier transform infrared spectroscopy), and morphologically, by scanning electron microscopy (SEM). Secondary electron images obtained by SEM allow precise characterization of such layers. Painting reconstructions were used as references in development of the method to study the sizing layer in real painting samples. Presented herein are examples of this study on 15th and 16th century Portuguese paintings, particularly on the Triptych of S. Simão, from the Aveiro Museum, and S. Pedro, belonging to the Mercy of Tavira.

Effect of Nanocellulose Loading on Tensile Properties of Nitrile Rubber

2017 ◽  
Vol 264 ◽  
pp. 112-115
Author(s):  
Erfan Suryani Abdul Rashid ◽  
Wageeh Abdulhadi Yehye ◽  
Nurhidayatullaili Muhd Julkapli ◽  
Sharifah Bee O.A. Abdul Hamid
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Tensile Test ◽  
Tensile Properties ◽  
Mechanical Performance ◽  
Butadiene Rubber ◽  
Fracture Surfaces ◽  
Scanning Electron

Nanocellulose (NCC) is incorporated into nitrile butadiene rubber (NBR) latex with the composition 0 to 5 phr using dipping method. Mechanical properties of NBR/NCC composites using tensile test was used to characterize their mechanical performance and the fracture surfaces post tensile test were studied. The tensile strength of NBR/NCC composites increase significantly with the addition of nanocellulose. This could be anticipated due to the presence of Van der Waals interaction between hydrophilic natures of nanocellulose with hydrophobic of NBR consequently limits the tearing propagation. The result was supported with the fracture surfaces morphology viewed under Fourier Emission Scanning Electron Microscopy (FESEM).

Sign in / Sign up

Export Citation Format

Share Document