Investigation of Mechanical Properties of Unidirectional Fibrous Composite by Micro-Mechanics Model

2012 ◽  
Vol 487 ◽  
pp. 481-486
Author(s):  
Kazem Reza-Kashyzadeh ◽  
Shokoofeh Dolati
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Fibrous Composite ◽  
Weight Ratio ◽  
High Strength ◽  
Element Model ◽  
Full Description ◽  
Modeling And Analysis ◽  
Unidirectional Fibrous Composite ◽  
Hardness Coefficient

The use of advanced composite materials reinforced with fibers is expanded in these years. The main reason for the increased use of these materials is their high strength and hardness coefficient, their density and low prices. So, the fiber-reinforced composite materials can be used in the design of structures that require high strength to weight ratio and hardness coefficient. In order to replace these materials and new applications, many research programs to study the mechanical behavior of these materials has shifted. In this paper Finite element model presented in which the fibers and matrix are modeled separately and to show a full description of the properties of the constituent components, the interface between matrix and fiber discontinuity is presented in the model With using modeling and analysis after great determination of mechanical properties of unidirectional fibrous composite single and compared with experimental results, the elastic modulus changes depending on the angle of the fibers is received . The results of this method are compared with available mathematical models.

Experimental investigation on the mechanical properties of aluminium sandwiched sisal/kenaf/aloevera/jute/flax natural fibre-reinforced epoxy LY556/GY250 composites

2020 ◽  
pp. 096739112097350
Author(s):  
Jeswin Arputhabalan ◽  
L Karunamoorthy ◽  
K Palanikumar
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Fibre Composite ◽  
Matrix Material ◽  
Aloe Vera ◽  
Weight Ratio ◽  
High Strength ◽  
Natural Fibre ◽  
Mechanical Tests ◽  
Natural Fibres

In engineering, composites have indicated a more profound influence in the recent development of materials with high strength to weight ratio. The purpose of this work is to identify the different and specific properties which a composite possesses when various reinforcement fibres are used in different epoxy matrix material. Composite materials have a major role to play with meeting that requirement. Many natural fibre composite materials possess good mechanical properties but still lack in satisfying applications requirements and alternate for which is seen as sandwich natural fibre composites. In this investigation, an effort has been made to study the mechanical properties exhibited by sandwich epoxy composite reinforced with various commonly used natural fibres, namely Aloevera, Kenaf, Sisal, Jute and Flax. The polymer resin used as matrix is also varied using Epoxy LY556 and Epoxy GY250. The originality of this work is in the use of Epoxy GY250 to fabricate sandwich composites with five commonly available natural fibres and compare its performance to the more widely used Epoxy LY556. It has been determined through various mechanical tests, which particular epoxy resin bonds better with the natural fibres namely, jute, sisal, aloe vera, kenaf and flax thereby providing better tensile, impact and flexural properties. The investigation is hoped to provide an insight into how the environmentally friendly natural fibres interact with the varying matrix resins and how this interaction affects the mechanical properties of said composites.

Analysis of Mechanical Properties on Roselle Fibre with Polymer Matrix Reinforced Composite

2016 ◽  
Vol 16 ◽  
pp. 1-6 ◽  
Author(s):  
S. Nallusamy
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Matrix Composite ◽  
Polymer Matrix ◽  
Weight Ratio ◽  
High Strength ◽  
Strength Properties ◽  
Reinforced Composite ◽  
Composite Field ◽  
Structural Applications

Over the past two decades it has been established that composite materials are the leading emerging materials. The natural fibres present a number of advantages over traditional synthetic fibres because of their better corrosion resistance, excellent thermo-mechanical properties and high strength to weight ratio. Also the composite materials play an important role in maintaining the eco-friendly design requirements. Among this, polymer matrix composite is one of the recent developing sectors on the composite field, because it has high strength with less density as compared to the metal matrix composite. Depending on the applications, the properties of the polymer reinforced composite are improved by modifying compositions, process of fabrication and direction of fibre etc. In this analysis the Roselle Fibre (Hibiscus Sabdariffa) is reinforced with polymer composite by wt % in the mode of compression molding. The mechanical properties of the above fabricated material were analyzed by ASTM Standards and also the characterization of polymer composites were analysed using SEM. The compressive strength and the hardness value were high as compared to other strength properties; hence it is more suitable for compressive and structural applications. The results concluded that the treated fibre with chemical reveals better compatibility with polymer matrix than that of untreated fibre.

Experimental Testing on Hybrid Composite Materials

2014 ◽  
Vol 592-594 ◽  
pp. 339-343 ◽  
Author(s):  
S. Sathish ◽  
T. Ganapathy ◽  
Thiyagarajan Bhoopathy
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Experimental Testing ◽  
Fiber Composite ◽  
Weight Ratio ◽  
High Strength ◽  
Jute Fiber ◽  
Sisal Fiber

In recent trend, the most used fiber reinforced composite is the glass fiber composite. The glass-fiber composites have high strength and mechanical properties but it is costlier than sisal and jute fiber. Though the availability of the sisal and jute fiber is more, it cannot be used for high strength applications. A high strength-low cost fiber may serve the purpose. This project focuses on the experimental testing of hybrid composite materials. The hybrid composite materials are manufactured using three different fibers - sisal, glass and jute with epoxy resin with weight ratio of fiber to resin as 30:70. Four combinations of composite materials viz., sisal-epoxy, jute-epoxy, sisal-glass-epoxy and sisal-jute-epoxy are manufactured to the ASTM (American Society for Testing and Materials) standards. The specimens are tested for their mechanical properties such as tensile and impact strength in Universal Testing machine. The results are compared with that of the individual properties of the glass fiber, sisal fiber, jute fiber composite and improvements in the strength-weight ratio and mechanical properties are studied.

Study of Whiskers to be Used in Composite Materials

2021 ◽  
Vol 316 ◽  
pp. 51-55
Author(s):  
Tamara I. Shishelova ◽  
Vadim V. Fedchishin ◽  
Mikhail A. Khramovskih
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Chemical Properties ◽  
High Strength ◽  
Rapid Expansion ◽  
Physical And Chemical Properties ◽  
Reinforcement Fiber ◽  
Object Of Study ◽  
Physical And Chemical ◽  
And Chemical Properties

Rapid expansion of technologies poses higher requirements to structural materials and items made of them. Conventional materials are being replaced by composite materials (composites). Different additives enhancing the properties of initial materials are used as reinforcement fibers of composites. Utilization of micro-and nanosize particles for production of present-day materials is paid much attention to. Whiskers are among such materials. These crystals have high strength, high chemical and temperature resistance. But for rational utilization of whickers of different chemical composition in composite materials one should know their physical and chemical properties. Objectives of the paper: to study physical and chemical properties of whiskers in different compounds, their composition and structure; to prove experimentally the feasibility of utilizing whiskers as a reinforcement fiber of composite materials. Object of study: specimens of whiskers of silicon nitride (Si3N4), aluminum oxide (Al2O3), aluminum nitride (AlN), and mullite (Al6Si2O13). Methods of investigation: thermal study of specimens, study of mechanical properties and chemical strength, and IR-spectroscopy. Results of study: specimens of whiskers have been studied and their mechanical properties have been tabulated for comparison. Extensive thermal investigation was followed by deduction of regularities and identification of chemical properties of whiskers. IR-spectra of whiskers have been studied and conclusions on molecular composition and on presence of impurities in some whiskers have been made.

scholarly journals Modelling mechanical properties of the multilayer composite materials with the polyamide core

2018 ◽  
Vol 157 ◽  
pp. 02052 ◽  
Author(s):  
Krzysztof Talaśka ◽  
Dominik Wojtkowiak
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
High Strength ◽  
Conveyor Belt ◽  
Complex Model ◽  
Multilayer Composite ◽  
Thermosetting Polymers ◽  
Wide Range ◽  
Belt Conveyors ◽  
Polyamide Film

Due to the wide range of application for belt conveyors, engineers look for many different combinations of mechanical properties of conveyor and transmission belts. It can be made by creating multilayer or fibre reinforced composite materials from base thermoplastic or thermosetting polymers. In order to gain high strength with proper elasticity and friction coefficient, the core of the composite conveyor belt is made of polyamide film core, which can be combined with various types of polymer fabrics, films or even rubbers. In this paper authors show the complex model of multilayer composite belt with the polyamide core, which can be used in simulation analyses. The following model was derived based on the experimental research, which consisted of tensile, compression and shearing tests. In order to achieve the most accurate model, proper simulations in ABAQUS were made and then the results were compared with empirical mechanical characteristics of a conveyor belt. The main goal of this research is to fully describe the perforation process of conveyor and transmission belts for vacuum belt conveyors. The following model will help to develop design briefs for machines used for mechanical perforation.

Investigation of Mechanical Properties of Silk and Epoxy Composite Materials

2021 ◽  
Vol 889 ◽  
pp. 27-31
Author(s):  
Norie A. Akeel ◽  
Vinod Kumar ◽  
Omar S. Zaroog
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Composite Materials ◽  
Epoxy Composite ◽  
Mechanical Test ◽  
Weight Ratio ◽  
Industrial Applications ◽  
Sem Analysis ◽  
Equivalent Strength ◽  
Test Impact

This research Investigates the new composite materials are fabricated of two or more materials raised. The fibers material from the sources of natural recycled materials provides certain benefits above synthetic strengthening material given that very less cost, equivalent strength, less density, and the slightest discarded difficulties. In the current experiments, silk and fiber-reinforced epoxy composite material is fabricated and the mechanical properties for the composite materials are assessed. New composite materials samples with the dissimilar fiber weight ratio were made utilizing the compression Molding processes with the pressure of 150 pa at a temperature of 80 °C. All samples were exposed to the mechanical test like a tensile test, impact loading, flexural hardness, and microscopy. The performing results are the maximum stress is 33.4MPa, elastic modulus for the new composite material is 1380 MPa, and hardness value is 20.64 Hv for the material resistance to scratch, SEM analysis of the microstructure of new composite materials with different angles of layers that are more strength use in industrial applications.

Investigation of the Mechanical Behavior of Natural Vegetable Fibers Used in Composite Materials for Structural Strengthening

2021 ◽  
Vol 888 ◽  
pp. 15-21
Author(s):  
Ivelina Ivanova ◽  
Jules Assih ◽  
Dimitar Dontchev
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Fiber Composite ◽  
Low Cost ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Engineering Structures ◽  
Hemp Fiber ◽  
Plant Fibers ◽  
Hemp Fibers

This research aims at studying the mechanical properties of industrial hemp fibers and promoting their use as a reinforcing composite material for strengthening of civil engineering structures. Natural hemp fibers are of great interest due to the following advantages they have: low cost, high strength-to-weight ratio, low density and non-corrosive properties. The use of plant fiber composite materials has increased significantly in recent years because of the negative reduction impact on the environment. For example, the tendency to use renewable resources and their possibility for recycling. They cause fewer health and environmental problems than synthetic fibers. Natural fibers, in addition to environmental aspects, have advantages such as low densities, i.e. have low weight, interesting mechanical properties comparable to those of synthetic fiber materials, and last but not least, low cost. Composites based on natural plant fibers can be used to reinforce or repair reinforced concrete structures, as shown by research on flax fiber composites. These concretes specimens strengthened with biocomposite materials have very good resistance to bending and significantly increase the rigidity of the structure. The results show that the hemp fiber reinforcement has significant effects on the strengthening and increase in flexural strength from 8% to 35 %.

An assessment into mechanical properties and microstructural behavior of TIG welded Ti-6Al-4V titanium alloy

2020 ◽  
Vol 10 (3) ◽  
pp. 281-292 ◽  
Author(s):  
Saurabh Dewangan ◽  
Suraj Kumar Mohapatra ◽  
Abhishek Sharma
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Weight Ratio ◽  
High Strength ◽  
Hardness Test ◽  
Content Type ◽  
Ti Alloys ◽  
Microstructure And Mechanical Properties ◽  
Grade 5 ◽  
Selection Of

PurposeTitanium (Ti) alloys are in high demand in manufacturing industries all over the world. The property like high strength to weight ratio makes Ti alloys highly recommended for aerospace industries. Ti alloys possess good weldability, and therefore, they were extensively investigated with regard to strength and metallurgical properties of welded joint. This study aims to deal with the analysis of strength and microstructural changes in Ti-6Al-4V (Grade 5) alloy after tungsten inert gas (TIG) welding.Design/methodology/approachTwo pair of Ti alloy plates were welded in two different voltages, i.e. 24 and 28 V, with keeping the current constant, i.e. 80 A It was a random selection of current and voltage values to check the performance of welded material. Both the welded plates were undergone through some mechanical property analysis like impact test, tensile test and hardness test. In addition, the microstructure of the welded joints was also analyzed.FindingsIt was found that hardness and tensile properties gets improved with an increment in voltage, but this effect was reverse for impact toughness. A good corroboration between microstructure and mechanical properties, such as tensile strength, hardness and toughness, was reported in this work. Heat distribution in both the welded plates was simulated through ANSYS software to check the temperature contour in the plates.Originality/valueA good corroboration between microstructure and mechanical properties, such as tensile strength, hardness and toughness, was reported in this study.

Effect of FSP on Strength and Fracture Toughness of Aluminium Alloy 7000

2018 ◽  
Vol 877 ◽  
pp. 20-25
Author(s):  
P.K. Mandal
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Aluminium Alloy ◽  
Axial Force ◽  
Weight Ratio ◽  
High Strength ◽  
Hardness Measurement ◽  
Traverse Speed ◽  
Age Hardening ◽  
Friction Stir

The cast Al-Zn-Mg 7000 alloy has become one of the most potential structural materials in many engineering fields such as aircraft body, automotive casting due to their high strength to weight ratio, strong age hardening ability, competitive weight savings, attractive mechanical properties and improvement of thermal properties. The cast aluminium alloy has been modified of surface layer through a solid-state technique is called friction stir process (FSP). But basic principle has been followed by friction stir welding (FSW). This process can be used to locally refine microstructures and eliminate casting defects in selected locations, where mechanical properties improvements can enhance component performance and service life. However, some specified process parameters have adopted during experimental works. Those parameters are tool rotation speed (720 rpm), plate traverse speed (80 mm/min), axial force (15 kN), and tool design (i.e., pin height 3.5 mm and pin diameter 3.0 mm), respectively. The main mechanism behind this process likely to axial force and frictional force acting between the tool shoulder and workpiece results in intense heat generation and plastically soften the process material. The specified ratio of rotational speed (720 rpm) to traverse speed (80 mm/min) is considered 9 as low heat input during FSP and its entails low Zn vaporization problem results as higher fracture toughness of aluminium alloy. It is well known that the stirred zone (SZ) consists of refine equiaxed grains produced due to dynamic recrystallization. FSP has been proven to innovatively enhancing of various properties such as formability, hardness and fracture toughness (32.60 MPa√m). The hardness and fracture toughness of double passes AC+FSP aluminium alloy had been investigated by performing Vicker’s hardness measurement and fracture toughness (KIC)(ASTM E-399 standard) tests. Detailed observations with optical microscopy, Vicker’s hardness measurement, SEM, TEM, and DTA analysis have conducted to analyse microstructure and fracture surfaces of double passes FSP aluminium alloy.

Suppression of Internal Damping-Induced Instability Using Adaptive Techniques

2007 ◽  
Author(s):  
Andra´s Simon ◽  
George Flowers
Keyword(s):  
Composite Materials ◽  
Simulation Modeling ◽  
High Speed ◽  
High Strength ◽  
Light Weight ◽  
Internal Damping ◽  
Modeling And Analysis ◽  
Rotor Systems ◽  
Rotor Spinning ◽  
High Speeds

Advanced rotor systems, for such applications as high-speed flywheel systems, consist (in a basic fashion) of a lightweight rotor spinning at relatively high speeds and supported by magnetic bearings. Composite materials are an extremely attractive choice for such rotor designs, offering high strength with light-weight. However, there are a number of issues that must be addressed for such efforts to be successful. Specific issues include imbalance control and active techniques to suppress internal damping-induced instability. A detailed description of the problem being considered and a strategy for solving it are presented. Simulation modeling and analysis results are presented and discussed to illustrate the method and demonstrate its effectiveness.

Sign in / Sign up

Export Citation Format

Share Document