Effect of Uncontrolled Burning Rice Husk Ash in Foamed Concrete

2012 ◽  
Vol 626 ◽  
pp. 769-775 ◽  
Author(s):  
Josef Hadipramana ◽  
Abdul Aziz Abdul Samad ◽  
Ahmad Zaidi Ahmad Mujahid ◽  
Noridah Mohammad ◽  
Fetra Venny Riza
Keyword(s):  
Compressive Strength ◽  
Chemical Composition ◽  
Cement Paste ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Amorphous Material ◽  
Fine Aggregate ◽  
Interfacial Zone ◽  
Wide Range ◽  
Foamed Concrete

Recently, foamed concrete has become a popular construction material that can be used in wide range of constructions application. Whilst the Rice Husk Ash (RHA) as agro-waste is contain high amount of silicon dioxide. RHA is produced in significant amount every year from agriculture countries. RHA has potential as a material to produce foamed concrete. In this research RHA has been used as a replacement for fine aggregate which used in construction as ordinary concrete material. In this study, foamed concrete with target density 1400, 1600 and 1800 kg/m3 has been produced. The compressive strength of foamed concrete with RHA has been tested. Concrete with Ratio 1:3 of RHA/Sand has higher compressive strength than ratios 3:1 and 2:2 of RHA/sand for every density. XRD and XRF test has been used to determinate chemical composition and crystalline structure of RHA. The result showed that RHA is an amorphous material which amorphous is important thing to pozzolanic process when hydration of cement paste. SEM and EDS test has been conducted to determine microstructure and chemical composition on microstructure of RHA foamed concrete. Amorphous RHA incorporating cement paste produces pozzolanic reaction. It is reduces the porosity and width of interfacial zone in such a way the density is increase.

Contribution of RHA Granules as Filler to Improve the Impact Resistance of Foamed Concrete

2013 ◽  
Vol 594-595 ◽  
pp. 93-97 ◽  
Author(s):  
Josef Hadipramana ◽  
Abdul Aziz Abdul Samad ◽  
Ahmad Zaidi Ahmad Mujahid ◽  
Noridah Mohamad ◽  
Fetra Venny Riza
Keyword(s):  
Chemical Composition ◽  
Rice Husk ◽  
Impact Loading ◽  
Rice Husk Ash ◽  
Impact Resistance ◽  
Fine Aggregate ◽  
Foamed Concrete ◽  
Aerated Concrete ◽  
The Impact

Foamed concrete as aerated concrete widely used in range of constructions application, no exception to structure shield. As structure shield is important to resist on impact loading. Whilst, Rice Husk Ash (RHA) as agro-waste potentials as filler for foamed concrete. RHA that is produced by uncontrolled burning under 700oC during ± 6 hours obtain the granules contain the carbon and porous. The granules of RHA may fill the porous in matrix foamed concrete without remove the characteristic the foamed concrete its self-as aerated concrete. This investigation RHA has been used as a replacement for fine aggregate. Target density 1800 kg/m3of foamed concrete both of with and without RHA have been produced to compare their strength and characteristic of impact resistance. SEM and EDS test has been conducted to determine microstructure and chemical composition of foamed concrete with RHA. The results showed that granules of RHA filled the porous and bonded with the denser part into matrix. The presence of granules of RHA has been changing the role of the air cell of porous in foamed concrete when it was subjected to impact loading. Also the granules of RHA give the foamed concrete denser without losing its characteristic of porous entirely.

scholarly journals Hydrochloric Acid Pretreatment of Different Types of Rice Husk Ash Influence on the Properties of Cement Paste

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1524 ◽  
Author(s):  
Jing Liu ◽  
Chunyan Xie ◽  
Chao Fu ◽  
Xiuli Wei ◽  
Dake Wu
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Cement Paste ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Control Sample ◽  
Control Group ◽  
Rice Husks ◽  
Acid Pretreatment ◽  
Blank Control Group

When properly processed, rice husk ash (RHA) comprises a large amount of SiO2, which exhibits a high pozzolanic activity and acts as a good building filler. In this paper, the effects of rice husk ash content, acid pretreatment, and production regions on the compressive and flexural properties and water absorption of a cement paste were studied. The experimental results showed that the compressive strength of the rice husk ash was the highest with a 10% content level, which was about 16.22% higher than that of the control sample. The rice husk after acid pretreatment displayed a higher strength than that of the sample without the acid treatment, and the rice husk from the Inner Mongolia region indicated a higher strength than that from the Guangdong province. However, the flexural strength of each group was not significantly different from that of the blank control group. The trend observed for the water absorption was similar to that of the compressive strength. The variation in the RHA proportions had the greatest influence on the properties of the paste specimens, followed by the acid pretreatments of the rice husks. The production regions of the rice husks indicated the least influence.

Properties of Unfired Building Bricks Prepared from Fly Ash and Residual Rice Husk Ash

2015 ◽  
Vol 754-755 ◽  
pp. 468-472 ◽  
Author(s):  
Chao Lung Hwang ◽  
Trong Phuoc Huynh
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Flexural Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Fine Aggregate ◽  
Test Results ◽  
Design Algorithm ◽  
Potential Applications ◽  
Hardened Properties

This work investigates the possibility of using fly ash (FA) and Vietnam residual rice husk ash (RHA) in producing unfired building bricks with applying densified mixture design algorithm (DMDA) method. In this research, little amount of cement was added into the mixtures as binder substitution. Unground rice husk ash (URHA), an agricultural by-product, was used as partial fine aggregate replacement (10% and 30%) in the mixtures. The solid bricks of 220×105×60 mm in size were prepared in this study. The hardened properties of the bricks were investigated including compressive strength, flexural strength and water absorption according to corresponding Vietnamese standards. Forming pressure of 35 MPa was applied to form the solid bricks in the mold. The test results show that all brick specimens obtained good mechanical properties, which were well conformed to Vietnamese standard. Compressive strength and flexural strength of the bricks were respectively in range of 13.81–22.06 MPa and 2.25–3.47 MPa. It was definitely proved many potential applications of FA and RHA in the production of unfired building bricks.

scholarly journals PENGARUH CAMPURAN ABU SEKAM PADI DAN ABU ARANG TEMPURUNG SEBAGAI PENGGANTI SEBAGIAN AGREGAT HALUS TERHADAP KUAT TEKAN BETON

2021 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Agung Prayogi
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Coarse Aggregate ◽  
Rice Husk Ash ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Fine Aggregates ◽  
Compressive Strength Of Concrete ◽  
Average Compressive Strength ◽  
By Products

Abstract Concrete is the most widely used material throughout the world and innovations continue to be carried out to produce efficient development. Shell charcoal ash and rice husk ash are industrial by-products which have the potential to replace sand for concrete mix, especially in Indragiri Hilir. The research with the title "Effect of Mixture of Rice Husk Ash and Shell Ash Ashes as Substitute for Some Fine Aggregates Against Concrete Compressive Strength" aims to prove the effect of a mixture of shell charcoal ash and husk ash to replace some of the sand to produce maximum compressive strength. Concrete is a mixture of Portland cement, fine aggregate, coarse aggregate, and water. This research uses 5 variations of the mixture to the weight of sand, BSA 0 without a substitute mixture, BSA 1 with a mixture of 5% husk ash and 10% shell charcoal, BSA 2 with a mixture of 5% husk ash and 15% charcoal ash, BSA 3 with a mixture of 5% husk ash and 18% charcoal, BSA 4 with a mixture of 10% husk and 10% charcoal, and BSA 5 with a mixture of 13% husk ash and 10% charcoal ash. SNI method is used for the Job Mix Formula (JMF) mixture in this research. The results of the average compressive strength of concrete at 28 days for JMF of 21.05 MPa, BSA 1 of 23.68 MPa, BSA 2 of 22.23 MPa, BSA 3 of 14.39 MPa, BSA 4 of 13.34 MPa , and BSA 5 of 20.14 MPa. The conclusion drawn from the results of the BSA 1 research with a mixture of 5% husk ash and 15% charcoal ash produced the highest average compressive strength of 23.68 MPa. Abstrak Beton merupakan material paling banyak digunakan diseluruh dunia dan terus dilakukan inovasi untuk menghasilkan pembangunan yang efisien. Abu arang tempurung dan abu sekam padi merupakan hasil sampingan industri yang berpotensi sebagai pengganti pasir untuk campuran beton, khususnya di Indragiri Hilir. Penelitian dengan judul “Pengaruh Campuran Abu Sekam Padi dan Abu Arang Tempurung Sebagai Pengganti Sebagian Agregat Halus Terhadap Kuat Tekan Beton” ini bertujuan membuktikan adanya pengaruh campuran abu arang tempurung dan abu sekam untuk mengganti sebagian pasir hingga menghasilkan kuat tekan maksimum. Beton adalah campuran antara semen portland, agregat halus, agregat kasar, dan air. Penelitian ini menggunakan 5 variasi campuran terhadap berat pasir, BSA 0 tanpa campuran pengganti, BSA 1 dengan campuran 5 % abu sekam dan 10% arang tempurung, BSA 2 dengan campuran 5% abu sekam dan 15% abu arang, BSA 3 dengan campuran 5% abu sekam dan 18% arang, BSA 4 dengan campuran 10% sekam dan 10% arang, dan BSA 5 dengan campuran 13% abu sekam dan 10% abu arang. Metode SNI digunakan untuk campuran Job Mix Formula (JMF)  pada penelitian ini. Hasil rata-rata kuat tekan beton pada umur 28 hari untuk JMF sebesar 21,05 MPa, BSA 1 sebesar 23,68 MPa, BSA 2 sebesar 22,23 MPa, BSA 3 sebesar 14,39 MPa, BSA 4 sebesar 13,34 MPa, dan BSA 5 Sebesar 20,14 MPa. Ditarik kesimpulan dari hasil penelitian BSA 1 dengan campuran 5% abu sekam dan 15% abu arang menghasilkan rata-rata kuat tekan tertinggi yaitu sebesar 23,68 MPa.  

scholarly journals The Effect of Rise Husk Ash on Concrete Mixing Quality Formula

2020 ◽  
Vol 4 (1) ◽  
pp. 29-36
Author(s):  
Hurul 'Ain ◽  
Alan Putranto ◽  
Betti Ses Eka Polonia ◽  
Ahmad Ravi
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Testing Machine ◽  
Test Material ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Additional Material ◽  
Material Sources ◽  
Alternative Material

The effect of the addition of rice husk ash (rice husk ash) to the K-175 formula quality concrete mixture, as an aggregate mixture to the concrete compressive strength test using a Compression Testing Machine to get the compressive strength value of concrete and can be used as an alternative material as an additional material in making concrete in improving the quality of building construction. The study uses K-175 concrete quality characteristics as a test material. Test object in the shape of a cube with a size of 15cm x 15cm. With 4 variations in levels of addition of rice husk ash by 0%, 1.5%, 3.5%, and 5% by weight of cement. The husk ash used is the husk ash that escaped the 2.36 mm filter size. From each type of mixture made 9 test specimens, every 3 specimens for the age of concrete 7 days, 14 days and 28 days. Concrete mortar design using ASTM method. With material sources using fine aggregate from the Pawan Ketapang River and coarse aggregate from Merak, Banten. Stages of implementation include examining the nature of aggregate materials, sample making, and testing of concrete compressive strength.

scholarly journals Prediction of Compressive Strengths for Rice Husks Ash incorporated concrete, Using Neural Network and Reviews

2021 ◽  
Vol 18 (1) ◽  
Author(s):  
Cornelius Ngunjiri Ngandu
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Concrete Strength ◽  
Cementitious Material ◽  
Machine Learning Techniques ◽  
Percentage Error ◽  
Green Concrete ◽  
Original Dataset ◽  
Wide Range

Modelling of concrete that incorporates agricultural wastes such as rice husk ash (RHA) could potentially enhance utilization of green concrete and application of sustainable construction materials. This paper evaluations compressive strength prediction for rice husk ash (RHA) cementitious material incorporated concrete using artificial neural networks (ANNs) one of the various prediction methods.  The research is based on various previous experimental studies.Literature reviews of 72 datasets for RHA incorporated concrete from 15 previous researches, were used and subjected to ANNs models, having learning rate of 0.06 with tanh activation functions. Four(4) input variables were considered, namely:- superplasticizer or water reducers variation from control (%), water to binder ratio, percentage of RHA and control compressive strengths. Output variable was compressive strength of RHA cementitious material incorporated concrete. The ANN with 15 neurons in the hidden layer was selected and indicated overall values of 5.10MPa, 0.99, 3.81MPa and 9.73% for the root mean square error (RMSE), absolute factor of variance (R2), mean absolute error (MAE) and mean absolute percentage error (MAPE) respectively and for individual training, validation/checking and testing datasets, the RMSE, R2, MAE and MAPE ranging between 3.98MPa-6.56MPa, 0.98-0.99, 3.44MPa-4.94MPa and 9.19%-12.41% respectively. Generally, both predicted and original dataset, indicated higher and lower strength values for 5-10% and 15-30% RHA incorporated cementitious material concrete respectively compared to the control strengths.Considering that the study utilized data from different sources and with a wide range of concrete strengths the selected ANN showed relatively good performance. The study provides an indicator that machine learning techniques could accurately predict green concrete strength. Based on model performance the percentage RHA cementitious materials in concrete and the other 3 input variable had a significant impact on concrete strengths. Future research should be conducted to predict green concrete focused on particular concrete class.

Effect of Rice Husk and Rice Husk Ash on Properties of Lightweight Clay Bricks

2015 ◽  
Vol 659 ◽  
pp. 74-79 ◽  
Author(s):  
Sutas Janbuala ◽  
Thanakorn Wasanapiarnpong
Keyword(s):  
Compressive Strength ◽  
Organic Matter ◽  
Chemical Composition ◽  
Water Absorption ◽  
Bulk Density ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Clay Brick ◽  
Clay Bricks ◽  
The Difference

The objective of this study is to investigate the effect of rice husk and rice husk ash which have the difference chemical composition and organic matter on porosity and properties of lightweight clay brick . Comparative adding between rice husk and rice husk ash were varied by 10, 20, 30, 40 % by weight. The results showed that more adding of rice husk and rice husk ash increase pore in microstructure and water absorption, while decrease bulk density. Porosity and water absorption are maximized when the rice husk are added at 40 %. The clay brick with 10, 20 and 30 % of rice husk or rice husk ash addition showed the required density and compressive strength followed the industrial standard of lightweight brick. The addition with 10 % of rice husk showed the best properties as 1.20 g/cm3 of bulk density and 4.6 MPa of compressive strength with 36.57 % of porosity. Whereas, the 10 % addition of rice husk ash showed 1.18 g/cm3 of bulk density and 5.97 MPa with 37.27 % of porosity.

Fresh properties and compressive strength of self compacting concrete with fines aggregate replacement using red brick powder and rice husk ash

2020 ◽  
Vol 17 (4) ◽  
pp. 473-480
Author(s):  
Hakas Prayuda ◽  
Fanny Monika ◽  
Martyana Dwi Cahyati
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Construction Projects ◽  
Rice Husk Ash ◽  
High Strength ◽  
Fine Aggregate ◽  
Fresh Properties ◽  
Self Compacting Concrete ◽  
Content Type ◽  
Brick Powder

Purpose This study aims to discuss the results of fresh properties and compressive strength of self-compacting concrete using ingredients added red brick powder as a fine aggregate substitute. The results of the study were compared with the properties of fresh properties and compressive strength with ingredients added by rice husk ash, which is also a fine aggregate substitute. In addition, the initial compressive strength of each of these variations was also examined to accelerate the completion time of construction projects using self-compacting concrete. Design/methodology/approach This research was conducted in a laboratory by testing the characteristics of fresh and hardened properties of self-compacting concrete. Findings Fresh properties testing is carried out in the form of V-funnel, flow table, J-ring and L-box where all specimens produce quite varied flow rates. Compressive strength was estimated at ages 3, 7, 14 and 28 days with cylindrical specimens with a diameter of 150 mm and a height of 300 mm. The variation of fine aggregate substitutes used is 20, 40 and 60 per cent. Originality/value From the results of the compressive strength, it can be concluded that the added material is categorized as self-compacting concrete with high initial compressive strength, while at 28 days, the compressive strength test results are categorized as high-strength self-compacting concrete.

scholarly journals PREDICTION OF STRENGTH AND SLUMP OF RICE HUSK ASH INCORPORATED HIGH-PERFORMANCE CONCRETE

2012 ◽  
Vol 18 (3) ◽  
pp. 310-317 ◽  
Author(s):  
Md. Nazrul Islam ◽  
Muhammad Fauzi Mohd Zain ◽  
Maslina Jamil
Keyword(s):  
Experimental Data ◽  
Compressive Strength ◽  
Rice Husk ◽  
High Performance ◽  
Rice Husk Ash ◽  
High Performance Concrete ◽  
Fine Aggregate ◽  
Aggregate Content ◽  
Binder Ratio ◽  
Water To Binder Ratio

This paper describes the development of statistical models to predict strength and slump of rice husk ash (RHA) incorporated high-performance concrete (HPC). Sixty samples of RHA incorporated HPC mixes having compressive strength range of 42–92 MPa and slump range of 170–245 mm were prepared and tested in the laboratory. These experimental data of sixty RHA incorporated HPC mixes were used to develop two models. Six variables namely water-to-binder ratio, cement content, RHA content, fine aggregate content, coarse aggregate content and superplasticizer content were selected to develop the models and ultimately to predict strength and slump of RHA incorporated HPC. The models were developed by regression analysis. Additional five HPC mixes were prepared with the same ingredients and tested under the same testing conditions to verify the ability of the proposed models to predict the responses. The results of the prediction of the models showed good agreement with the experimental data. Thus the developed models can be used to predict slump and 28-day compressive strength of RHA incorporated HPC. The research demonstrated that strength and slump of HPC could be successfully modeled using statistical analysis.

Sign in / Sign up

Export Citation Format

Share Document