The New Technologies in Chitin/Chitosan Preparation

2013 ◽  
Vol 666 ◽  
pp. 143-150
Author(s):  
Shou Feng Yang ◽  
Hong Cai Zhang ◽  
Yi Xiang Shi ◽  
A Jun Wan
Keyword(s):  
Functional Properties ◽  
Chemical Method ◽  
New Technologies ◽  
Raw Materials ◽  
Renewable Resource ◽  
Extraction Methods ◽  
Ecological Environment ◽  
Research Development ◽  
Environment Friendly ◽  
At Home

Chitin/chitosan, a naturally renewable resource, have unique functional properties including biocompatibility, biodegradability, and non-toxicity, which have been widely applied in many fields, such as food, agriculture, medicine, materials, etc. Chemical method is commonly employed in extracting chitin/chitosan in China, but that requires significant amount of waste, and will seriously pollutes the ecological environment. Recently, studies in extracting chitin/chitosan using environment-friendly methods are substantially reported at home and abroad. The aim of this paper is to review the latest research development of extraction methods of chitin/chitosan from raw materials, providing helpful guidances for researchers in this field.

The sugar and alcohol industry in the biofuels and cogeneration era: a paradigm change (part II)

2014 ◽  
pp. 97-104 ◽  
Author(s):  
Electo Eduardo Silv Lora ◽  
Mateus Henrique Rocha ◽  
José Carlos Escobar Palacio ◽  
Osvaldo José Venturini ◽  
Maria Luiza Grillo Renó ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Process Integration ◽  
Animal Feed ◽  
Raw Materials ◽  
Biofuel Production ◽  
New Paradigm ◽  
Alcohol Industry ◽  
Feed Production ◽  
Steam Parameters

The aim of this paper is to discuss the major technological changes related to the implementation of large-scale cogeneration and biofuel production in the sugar and alcohol industry. The reduction of the process steam consumption, implementation of new alternatives in driving mills, the widespread practice of high steam parameters use in cogeneration facilities, the insertion of new technologies for biofuels production (hydrolysis and gasification), the energy conversion of sugarcane trash and vinasse, animal feed production, process integration and implementation of the biorefinery concept are considered. Another new paradigm consists in the wide spreading of sustainability studies of products and processes using the Life Cycle Assessment (LCA) and the implementation of sustainability indexes. Every approach to this issue has as an objective to increase the economic efficiency and the possibilities of the sugarcane as a main source of two basic raw materials: fibres and sugar. The paper briefly presents the concepts, indicators, state-of-the-art and perspectives of each of the referred issues.

Anthocyanins: Chemical Properties and Health Benefits: A Review

2021 ◽  
Vol 17 ◽  
Author(s):  
Siraj Salman Mohammad ◽  
Renata Oliveira Santos ◽  
Maria Ivone Barbosa ◽  
José Lucena Barbosa Junior
Keyword(s):  
Raw Materials ◽  
Health Benefits ◽  
Chemical Properties ◽  
Extraction Methods ◽  
The Body ◽  
Raw Material ◽  
Extraction Properties ◽  
Therapeutic Properties ◽  
Food Processes ◽  
Shed Light

: Anthocyanins are widely spread in different kinds of food, especially fruits and floral tissues, there is an extensive range of anthocyanin compounds reach more than 600 exist in nature. Anthocyanins can be used as antioxidants and raw material for several applications in food and pharmaceutical industry. Consequently, a plenty of studies about anthocyanins sources and extraction methods were reported. Furthermore, many studies about their stability, bioactive and therapeutic properties have been done. According to the body of work, we firstly worked to shed light on anthocyanin properties including chemical, antioxidant and extraction properties. Secondly, we reported the applications and health benefits of anthocyanin including the applications in food processes and anthocyanin characteristics as therapeutic and prophylactic compounds. We reviewed anticancer, anti-diabetic, anti-fatness, oxidative Stress and lipid decreasing and vasoprotective effects of anthocyanins. In conclusion, because the importance of phytochemicals and bioactive compounds the research is still continuing to find new anthocyanins from natural sources and invest them as raw materials in the pharmaceutical and nutrition applications.

scholarly journals Technologies and Extraction Methods of Polyphenolic Compounds Derived from Pomegranate (Punica granatum) Peels. A Mini Review

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 236
Author(s):  
Dimitrios Lampakis ◽  
Prodromos Skenderidis ◽  
Stefanos Leontopoulos
Keyword(s):  
Electric Fields ◽  
Bioactive Compounds ◽  
New Technologies ◽  
Ohmic Heating ◽  
Punica Granatum ◽  
Extraction Methods ◽  
Added Value ◽  
Green Solvents ◽  
Ultrasound Assisted Extraction ◽  
Functional Product

The interest in using plant by-product extracts as functional ingredients is continuously rising due to environmental and financial prospects. The development of new technologies has led to the achievement of aqueous extracts with high bioactivity that is preferable due to organic solvents nonuse. Recently, widely applied and emerging technologies, such as Simple Stirring, Pressure-Applied Extraction, Enzymatic Extraction, Ultrasound-Assisted Extraction, Pulsed Electric Fields, High Hydrostatic Pressure, Ohmic Heating, Microwave Assistant Extraction and the use of “green” solvents such as the deep eutectic solvents, have been investigated in order to contribute to the minimization of disadvantages on the extraction of bioactive compounds. This review is focused on bioactive compounds derived from pomegranate (Punica granatum) peels and highlighted the most attractive extraction methods. It is believed that these findings could be a useful tool for the pomegranate juices industry to apply an effective and economically viable extraction process, transforming a by-product to a high added value functional product.

scholarly journals New Circular Challenges in the Development of Take-Away Food Packaging in the COVID-19 Period

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4705
Author(s):  
Ewa Kochańska ◽  
Rafał M. Łukasik ◽  
Maciej Dzikuć
Keyword(s):  
Social Transformation ◽  
Food Packaging ◽  
New Technologies ◽  
Negative Impact ◽  
Raw Materials ◽  
Distribution Channels ◽  
Low Carbon ◽  
Industrial Transformation ◽  
Specific Distribution ◽  
Food Market

The COVID-19 pandemic has set new challenges for the HoReCa industry. Lockdowns have coincided with and strongly impacted the industrial transformation processes that have been taking place for a decade. Among the most important HoReCa transition processes are those related to the rapid growth of the delivery-food market and ordering meals via internet platforms. The new delivery-food market requires not only the development of specific distribution channels, but also the introduction of appropriate, very specific food packaging. Food packaging and its functionality are defined by the administrative requirements and standards applicable to materials that have contact with food and principally through the prism of the ecological disaster caused by enormous amounts of plastic waste, mainly attributed to the food packaging. To meet environmental and administrative requirements, new technologies to produce food packaging materials are emerging, ensuring product functionality, low environmental impact, biodegradability, and potential for composting of the final product. However, predominantly, the obtained product should keep the nutritional value of food and protect it against changes in color or shape. Current social transformation has a significant impact on the food packaging sector, on one hand creating a new lifestyle for society all over the world, and on the other, a growing awareness of the negative impact of humans on the environment and increasing responsibility for the planet. The COVID-19 pandemic has highlighted the need to develop a circular economy based on the paradigm of shortening distribution channels, using local raw materials, limiting the consumption of raw materials, energy, water, and above all, minimizing waste production throughout the life cycle of products, all of which are in line with the idea of low-carbon development.

scholarly journals Screening of Twelve Pea (Pisum sativum L.) Cultivars and Their Isolates Focusing on the Protein Characterization, Functionality, and Sensory Profiles

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 758
Author(s):  
Verónica García Arteaga ◽  
Sonja Kraus ◽  
Michael Schott ◽  
Isabel Muranyi ◽  
Ute Schweiggert-Weisz ◽  
...  
Keyword(s):  
Pisum Sativum ◽  
Functional Properties ◽  
Protein Extraction ◽  
Raw Materials ◽  
Principal Component ◽  
Protein Characterization ◽  
Sensory Profile ◽  
Food Ingredients ◽  
Pisum Sativum L ◽  
Sensory Profiles

Pea protein concentrates and isolates are important raw materials for the production of plant-based food products. To select suitable peas (Pisum sativum L.) for protein extraction for further use as food ingredients, twelve different cultivars were subjected to isoelectric precipitation and spray drying. Both the dehulled pea flours and protein isolates were characterized regarding their chemical composition and the isolates were analyzed for their functional properties, sensory profiles, and molecular weight distributions. Orchestra, Florida, Dolores, and RLPY cultivars showed the highest protein yields. The electrophoretic profiles were similar, indicating the presence of all main pea allergens in all isolates. The colors of the isolates were significantly different regarding lightness (L*) and red-green (a*) components. The largest particle size was shown by the isolate from Florida cultivar, whereas the lowest was from the RLPY isolate. At pH 7, protein solubility ranged from 40% to 62% and the emulsifying capacity ranged from 600 to 835 mL g−1. The principal component analysis revealed similarities among certain pea cultivars regarding their physicochemical and functional properties. The sensory profile of the individual isolates was rather similar, with an exception of the pea-like and bitter attributes, which were significantly different among the isolates.

scholarly journals Concentrates of polyphenols from grape raw materials and their functional properties

2021 ◽  
Vol 640 (5) ◽  
pp. 052003
Author(s):  
Yu A Ogay ◽  
I V Chernousova ◽  
G P Saitsev ◽  
V Y Mosolkova ◽  
T A Zhilyakova ◽  
...  
Keyword(s):  
Functional Properties ◽  
Raw Materials

scholarly journals Liquid smoke application in latex as an environment-friendly natural coagulant

2021 ◽  
Vol 926 (1) ◽  
pp. 012052
Author(s):  
Evahelda ◽  
R F Astuti ◽  
S N Aini ◽  
Nurhadini
Keyword(s):  
Raw Materials ◽  
Clotting Time ◽  
Wood Industry ◽  
Rubber Material ◽  
Environment Friendly ◽  
Natural Coagulant ◽  
Liquid Smoke ◽  
Randomized Design ◽  
Completely Randomized Design

Abstract Liquid smoke has many benefits, especially in the food, fishery, timber, and plantation industries. It is used as a preservative or durability increased and aroma and taste addition in the food and fishery industry. In the wood industry, liquid smoke can resist termite attacks, while in the plantation industry, it functions as a latex coagulant containing antifungal, antibacterial, and antioxidants that can improve rubber product’s quality. Most of the rubber farmers in Bangka Belitung still use alum as a coagulant to coagulate their latex. However, alum coagulant can reduce the quality of the processed rubber material (bokar). The reason farmers use alum is that raw materials are cheap, therefore getting coagulant raw materials at low prices and not pollute the environment with a less moderate aroma/odor caused by non-recommended coagulant materials (alum) are needed. This study aims to apply liquid smoke as a natural coagulant in latex freezing. The research method used a Completely Randomized Design, with liquid smoke concentration replicated three times. Parameters observed were clotting time speed and organoleptic test for odor during 14 days of storage. The results showed that the best concentration of liquid smoke was 15% no odor and a clotting time of 8.23 minutes.

Sign in / Sign up

Export Citation Format

Share Document