Essential Model for Oil and Gas Trap Evaluation

2014 ◽  
Vol 962-965 ◽  
pp. 626-629
Author(s):  
Guo Min Chen ◽  
Quan Wen Liu
Keyword(s):  
Oil And Gas ◽  
Evaluation Model ◽  
Theory Model ◽  
Hydrocarbon Exploration ◽  
Evaluation Theory ◽  
Qualitative And Quantitative ◽  
Hydrocarbon Traps ◽  
Speed Up ◽  
High Level ◽  
Evaluation Parameters

With the further and high level of hydrocarbon exploration and development in China even around the world, the hydrocarbon exploration tend to be the fine and comprehensive exploration and targets are mainly plays or traps, the structural trap, is the mainly exploration targets, will gradually give way to the alternative exploration objects, the litho-stratigraphic traps, which are more subtle and competitive. Therefore, the new trap evaluation theory model needed to be work out to speed up the hydrocarbon exploration. According to the characteristics of the hydrocarbon traps exploration at present stage, this paper deeply analyzes the trap evaluation contents and characteristics, on the basis of combination with the qualitative and quantitative comprehensive research of trap evaluation parameters, the essential evaluation model is corresponding to traps is established finally.

scholarly journals Gray Assessment of Equipment Maintenance Support Capability Based on the Structure Entropy Weight Method

2019 ◽  
Vol 256 ◽  
pp. 02002
Author(s):  
Tao Huang ◽  
Jiaqi Xiang ◽  
Hongmin Yu
Keyword(s):  
Comprehensive Evaluation ◽  
Evaluation Model ◽  
Equipment Maintenance ◽  
Entropy Weight ◽  
Evaluation Theory ◽  
Qualitative And Quantitative ◽  
Comprehensive Evaluation Model ◽  
Entropy Weight Method ◽  
Weight Method ◽  
The Index System

The influencing factors which about equipment maintenance support abilities are analysed and the index system that is used to evaluate equipment support abilities are constructed in the paper. Then, the weight of the index is determined by the structure entropy weight method which is a combination of qualitative and quantitative. The comprehensive evaluation model of equipment maintenance support abilities are constructed by combining gray clustering evaluation theory. Finally, the feasibility and validity of the model are verified by an example.

Pollen morphology of some Tamarix (Tamaricaceae) species of Iran

2020 ◽  
Vol 62 (1-2) ◽  
pp. 151-161
Author(s):  
T. Shagholi ◽  
M. Keshavarzi ◽  
M. Sheidai
Keyword(s):  
North Africa ◽  
Pollen Grains ◽  
Ecological Niches ◽  
Multivariate Statistical Methods ◽  
Multivariate Statistical ◽  
Qualitative And Quantitative ◽  
Petal Length ◽  
Electron Microscopes ◽  
High Level ◽  
Scanning Electron Microscopes

Tamarix L. (Tamaricaceae) is a halophytic shrub in different parts of Asia and North Africa. Taxonomy and species limitation of Tamarix is very complex. This genus has three sections as Tamarix, Oligadenia, and Polyadenia, which are mainly separated by petal length, the number of stamens, the shape of androecial disk and attachment of filament on the androecial disk. As there was no palynological data on pollen features of Tamarix species of Iran, in the present study 12 qualitative and quantitative pollen features were evaluated to find diagnostic ones. Pollen grains of 8 Tamarix species were collected from nature. Pollen grains were studied without any treatment. Measurements were based on at least 50 pollen grains per specimen. Light and scanning electron microscopes were used. Multivariate statistical methods were applied to clarify the species relationships based on pollen data. All species studied showed monad and tricolpate (except some individuals of T. androssowii). Some Tamarix species show a high level of variability, in response to ecological niches and phenotypic plasticity, which make Tamarix species separation much more difficult. Based on the results of the present study, pollen grains features are not in agreement with previous morphological and molecular genetics about the sectional distinction.

scholarly journals Prospects of Using Hydrocarbon Deposits from the Autochthonous Miocene Formation (Eastern Carpathian Foredeep, Poland) for Geothermal Purposes

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3102
Author(s):  
Anna Chmielowska ◽  
Anna Sowiżdżał ◽  
Barbara Tomaszewska
Keyword(s):  
Oil And Gas ◽  
Geothermal System ◽  
Vast Number ◽  
Hydrocarbon Traps ◽  
Oil And Gas Fields ◽  
Geothermal Potential ◽  
Carpathian Foredeep ◽  
And Migration ◽  
Gas Fields ◽  
Geothermal Parameters

There are many oil and gas fields around the world where the vast number of wells have been abandoned or suspended, mainly due to the depletion of reserves. Those abandoned oil and gas wells (AOGWs) are often located in areas with a prospective geothermal potential and might be retrofitted to a geothermal system without high-cost drilling. In Poland, there are thousands of wells, either operating, abandoned or negative, that might be used for different geothermal applications. Thus, the aim of this paper is not only to review geothermal and petroleum facts about the Eastern Carpathian Foredeep, but also to find out the areas, geological structures or just AOGWs, which are the most prospective in case of geothermal utilization. Due to the inseparability of geological settings with both oil and gas, as well as geothermal conditionings, firstly, the geological background of the analyzed region was performed, considering mainly the autochthonous Miocene formation. Then, geothermal and petroleum detailed characteristics were made. In the case of geothermal parameters, such as formation’s thickness, temperatures, water-bearing horizons, wells’ capacities, mineralization and others were extensively examined. Considering oil and gas settings, insights into reservoir rocks, hydrocarbon traps and migration paths issues were created. Then, for evaluating geothermal parameters for specific hydrocarbon reservoirs, their depths were established based on publicly available wells data. Thereafter, the average temperatures for selected reservoirs were set. As the effect, it turned out that most of the deposits have average temperatures of 40/50 °C, nonetheless, there are a few characterized by higher (even around 80 °C) temperatures at reasonable depths.

scholarly journals Monitoring geological storage of CO2: a new approach

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Manzar Fawad ◽  
Nazmul Haque Mondol
Keyword(s):  
Oil And Gas ◽  
Synthetic Data ◽  
Leak Detection ◽  
Hydrocarbon Exploration ◽  
Water Flooding ◽  
Storage Site ◽  
Gas Reservoirs ◽  
New Approach ◽  
Coal Beds ◽  
Spatial Coverage

AbstractGeological CO2 storage can be employed to reduce greenhouse gas emissions to the atmosphere. Depleted oil and gas reservoirs, deep saline aquifers, and coal beds are considered to be viable subsurface CO2 storage options. Remote monitoring is essential for observing CO2 plume migration and potential leak detection during and after injection. Leak detection is probably the main risk, though overall monitoring for the plume boundaries and verification of stored volumes are also necessary. There are many effective remote CO2 monitoring techniques with various benefits and limitations. We suggest a new approach using a combination of repeated seismic and electromagnetic surveys to delineate CO2 plume and estimate the gas saturation in a saline reservoir during the lifetime of a storage site. This study deals with the CO2 plume delineation and saturation estimation using a combination of seismic and electromagnetic or controlled-source electromagnetic (EM/CSEM) synthetic data. We assumed two scenarios over a period of 40 years; Case 1 was modeled assuming both seismic and EM repeated surveys were acquired, whereas, in Case 2, repeated EM surveys were taken with only before injection (baseline) 3D seismic data available. Our results show that monitoring the CO2 plume in terms of extent and saturation is possible both by (i) using a repeated seismic and electromagnetic, and (ii) using a baseline seismic in combination with repeated electromagnetic data. Due to the nature of the seismic and EM techniques, spatial coverage from the reservoir's base to the surface makes it possible to detect the CO2 plume’s lateral and vertical migration. However, the CSEM low resolution and depth uncertainties are some limitations that need consideration. These results also have implications for monitoring oil production—especially with water flooding, hydrocarbon exploration, and freshwater aquifer identification.

Understanding the Flow Dynamics of CO2 Plumes in the Subsurface

2021 ◽  
Author(s):  
Florence Letitia Bebb ◽  
Kate Clare Serena Evans ◽  
Jagannath Mukherjee ◽  
Bilal Saeed ◽  
Geovani Christopher
Keyword(s):  
Carbon Capture ◽  
Oil And Gas ◽  
Co2 Storage ◽  
Flow Dynamics ◽  
Hydrocarbon Exploration ◽  
Hydrocarbon Reservoir ◽  
Exploration And Production ◽  
And Migration ◽  
Carbon Dioxide Co2 ◽  
Hydrocarbon Exploration And Production

Abstract There are several significant differences between the behavior of injected CO2 and reservoired hydrocarbons in the subsurface. These fundamental differences greatly influence the modeling of CO2 plumes. Carbon capture, utilization, and storage (CCUS) is growing in importance in the exploration and production (E&P) regulatory environment with the Oil and Gas Climate Initiative (OGCI) making CCUS a priority. Companies need to prospect for storage sites and evaluate both the short-term risks and long-term fate of stored carbon dioxide (CO2). Understanding the physics governing fluid flow is important to both CO2 storage and hydrocarbon exploration and production. In the last decade, there has been much research into the movement and migration of CO2 in the subsurface. A better understanding of the flow dynamics of CO2 plumes in the subsurface has highlighted a number of significant differences in modeling CO2 storage sites compared with hydrocarbon reservoir simulations. These differences can greatly influence reliability when modeling CO2 storage sites.

STUDY OF OIL AND GAS PROSPECTIVE STRUCTURES OF THE ARAL SEA REGION WITH THE FORECAST OF THEIR RESERVES

2021 ◽  
Author(s):  
С.К. Курбаниязов
Keyword(s):  
Oil And Gas ◽  
Raw Materials ◽  
Research Work ◽  
Aral Sea ◽  
Short Term ◽  
Alluvial Deposits ◽  
Hydrocarbon Traps ◽  
Coastal Sea ◽  
Detailed Search ◽  
Gas Potential

В начале барремского времени море отступило и до начала позднего альба территория представляла собой низменную аккумулятивную равнину, в пределах которой происходило накопление аллювиальных и озерно-аллювиальных отложений: красно-коричневых глин, алевролитов с прослоями коричневых песчаников и песков и линзами темно-серого лигнита. В основании толщи отмечаются гравелиты и конгломераты. В раннемальбе произошла кратковременная трансгрессия моря, однако территория современного Восточного Приаралья не была затоплена и представляла собой прибрежно-морскую равнину, где накапливались глины, алевролиты и песчаники. К концу позднего альба море регрессировало, и территория вновь стала представлять собой низменную аллювиально-озерную равнину. По всей территории происходило накопление пестроцветных глин, зеленовато-серых алевролитов, песков и песчаников, а также углей. При проведении иследовательских работ были обоснованы наиболее перспективные типы ловушек углеводородного сырья по стратиграфическим уровням и выявлена зональность их распространения. Дана оценка перспектив района на выявление залежей нефти и газа. Выделены информативные и качественные признаки (критерии) нефтегазоносности. Обоснованы площади и конкретные структуры для постановки детальных поисковых работ на выявление залежей нефти и газа. Рассчитана оценка потенциальных ресурсов углеводородного сырья. At the beginning of the Barremian time, the sea receded and until the beginning of the late Alb, the territory was a low-lying accumulative plain, within which the accumulation of alluvial and lacustrine-alluvial deposits occurred: red-brown clays, siltstones with layers of brown sandstones and sands and lenses of dark gray lignite. Gravelites and conglomerates are noted at the base of the strata.In the Rannemalba, there was a short-term transgression of the sea, but the territory of the modern Eastern Aral Sea region was not flooded and was a coastal-sea plain, where clays, siltstones and sandstones accumulated. By the end of the Late Alb, the sea regressed and the area again became a low-lying alluvial-lacustrine plain. There was an accumulation of variegated clays, greenish-gray siltstones, sands and sandstones, as well as coals throughout the territory. During the research work, the most promising types of hydrocarbon traps were justified by stratigraphic levels and the zoning of their distribution was revealed. The assessment of the prospects of the area for the identification of oil and gas deposits is given. Informative and qualitative signs (criteria) of oil and gas potential are identified. The areas and specific structures for setting up detailed search operations to identify oil and gas deposits are justified. The estimation of potential resources of hydrocarbon raw materials is calculated.

Experimental Study on the Saturation Model of Volcanic Rock Based on Fluid Distribution

2021 ◽  
Vol 62 (4) ◽  
pp. 422-433
Author(s):  
Baozhi Pan ◽  
◽  
Weiyi Zhou ◽  
Yuhang Guo ◽  
Zhaowei Si ◽  
...  
Keyword(s):  
Volcanic Rock ◽  
Oil And Gas ◽  
Water Saturation ◽  
Early Stage ◽  
Evaluation Model ◽  
Acoustic Velocity ◽  
Distribution Model ◽  
Fluid Distribution ◽  
Water Drainage ◽  
Gas Reservoirs

A saturation evaluation model suitable for Nanpu volcanic rock formation is established based on the experiment of acoustic velocity changing with saturation during the water drainage process of volcanic rock in the Nanpu area. The experimental data show that in the early stage of water drainage, the fluid distribution in the pores of rock samples satisfies the patchy formula. With the decrease of the sample saturation, the fluid distribution in the pores is more similar to the uniform fluid distribution model. In this paper, combined with the Gassmann-Brie and patchy formula, the calculation equation of Gassmann-Brie-Patchy (G-B-P) saturation is established, and the effect of contact softening is considered. The model can be used to calculate water saturation based on acoustic velocity, which provides a new idea for the quantitative evaluation of volcanic oil and gas reservoirs using seismic and acoustic logging data.

scholarly journals PENGEMBANGAN MODEL EVALUASI KINERJA SD PENYELENGGARA PENDIDIKAN INKLUSIF

2013 ◽  
Vol 17 (1) ◽  
pp. 37-54
Author(s):  
N Dede Khoeriah
Keyword(s):  
Performance Evaluation ◽  
Elementary Schools ◽  
Focus Group ◽  
Inclusive Education ◽  
Focus Group Discussion ◽  
Evaluation Model ◽  
Group Discussion ◽  
Qualitative And Quantitative ◽  
Class Management ◽  
Teachers And Students

Penelitian ini bertujuan menghasilkan model evaluasi kinerja pendidikan inklusif (EKPI) di SD dengan menggunakan pen-dekatan kualitatif dan kuantitatif. Tahapan penelitian dimodifikasi dari model Borg & Gall dengan melibatkan Kepala Sekolah, guru, dan orang tua. Data diperoleh melalui teknik Focus Group Discussion, wawancara, observasi, dan studi dokumentasi. Hasil penelitian menunjukkan bahwa (1) model EKPI merupakan salah satu model evaluasi yang baik berdasarkan hasil penilaian pakar maupun praktisi penyelenggara pendidikan inklusif di SD; (2) model evaluasi kinerja SD penyelenggara pendidikan inklusif memiliki tujuh komponen, yakni kepemimpinan, rencana strategis, fokus terhadap peserta didik-orang tua, analisis kebutuhan, fokus ter-hadap guru-staf, pengelolaan kelas inklusif, dan hasil; (3) evaluasi model EKPI dalam proses implementasi di SD mampu meng-ungkap data secara: (a) komprehensif; (b) faktual; (c) fleksibel; dan (d)  berorientasi keragaman layanan. Kata kunci: pengembangan model evaluasi, pendidikan inklusif, SD. ______________________________________________________________DEVELOPING A MODEL OF PERFORMANCE EVALUATION OF ELEMENTARY SCHOOLS IMPLEMENTING INCLUSIVE EDUCATIONAbstract This study aims to produce a model of performance evaluation of elementary schools (ESs) implementing inclusive education by using qualitative and quantitative approaches. The research steps used the model by Borg & Gall, involving principals, teachers, and students’ parents. The data were collected through Focus Group Discussion (FGD), interviews, observations, document study, and discussions. Based on the results of the study, the following conclusions can be drawn. (1) The EKPI model is a good evaluation model. It is based on the result ofthe assessment by experts, usesrs and practitioners of inclusive education instruction; (2) The model of an evaluation of the performances of ESs implementing inclusive education has seven components, i.e. leadership, strategic plan, focus on students and parents, needs analysis, focus on teachers and staff, and inclusive class management, and product of the inclusive education implementation; (3) The EKPI model implemented  in the elementri schools can reveal data (a) comprehensively, (b) factualy, and (c) flexibly, (d) it was also oriented to a variety of services. Keywords: development of an evaluation model, inclusive education, elementary school.

scholarly journals An Open-Source Cloud-FPGA Gene Regulatory Accelerator

2021 ◽  
Author(s):  
Lucas Bragança ◽  
Jeronimo Penha ◽  
Michael Canesche ◽  
Dener Ribeiro ◽  
José Augusto M. Nacif ◽  
...  
Keyword(s):  
Open Source ◽  
Gene Regulatory Networks ◽  
High Performance ◽  
Regulatory Networks ◽  
Cloud Services ◽  
On Demand ◽  
Speed Up ◽  
Gene Regulatory ◽  
High Level ◽  
Better Than

FPGAs are suitable to speed up gene regulatory network (GRN) algorithms with high throughput and energy efficiency. In addition, virtualizing FPGA using hardware generators and cloud resources increases the computing ability to achieve on-demand accelerations across multiple users. Recently, Amazon AWS provides high-performance Cloud's FPGAs. This work proposes an open source accelerator generator for Boolean gene regulatory networks. The generator automatically creates all hardware and software pieces from a high-level GRN description. We evaluate the accelerator performance and cost for CPU, GPU, and Cloud FPGA implementations by considering six GRN models proposed in the literature. As a result, the FPGA accelerator is at least 12x faster than the best GPU accelerator. Furthermore, the FPGA reaches the best performance per dollar in cloud services, at least 5x better than the best GPU accelerator.

scholarly journals PENENTUAN LOKASI TOWER CRANE PADA PROYEK KONSTRUKSI BERBASIS SIMULASI

2020 ◽  
Vol 3 (4) ◽  
pp. 1305
Author(s):  
Gerwyn Persulessy ◽  
Basuki Anondho
Keyword(s):  
Travel Time ◽  
Construction Projects ◽  
Tower Crane ◽  
Location Determination ◽  
Heavy Equipment ◽  
Total Travel Time ◽  
Speed Up ◽  
High Level ◽  
Map Data ◽  
Geometric Layout

Development of high-level building construction projects that require complex equipment that can be used in high-level construction, equipment used to help complete construction projects called heavy equipment. One of the heavy equipment used in high-rise buildings is a tower crane. The use and layout of tower cranes can speed up the schedule and save on project costs. Therefore many methods have been developed to determine the tower crane layout. This study will discuss determining the location of tower cranes by discussing simulations. The location will be determined based on the site map data which is processed in the form of a geometric arrangement and tower crane data specifications. Location determination is done by comparing the total travel time of several simulated locations according to several different speed criteria in a construction project. Speed criteria are divided into four times the jib speed and trolley speed. Location of the location with the total travel time will be taken as the final result. Different speed criteria will make the total travel time change. ABSTRAKPerkembangan proyek pembangunan gedung bertingkat tinggi yang semakin kompleks menyebabkan diperlukannya peralatan yang dapat mempermudah pembangunan gedung bertingkat, peralatan yang digunakan untuk membantu menyelesaikan tugas konstruksi disebut alat berat. Salah satu peralatan berat yang digunakan pada gedung bertingkat tinggi adalah tower crane. Penggunaan dan tata letak tower crane yang baik dapat mempercepat jadwal dan menghemat biaya proyek. Oleh karena itu banyak dikembangkan metode-metode untuk menentukan tata letak tower crane. Penelitian ini akan membahas penetapan letak lokasi tower crane dengan pendekatan  simulasi. Letak lokasi akan ditetapkan berdasarkan data site map yang diolah dalam bentuk geometric layout dan data spesifikasi tower crane. Penetapan lokasi dilakukan dengan cara membandingkan total travel time dari beberapa lokasi yang disimulasi sesuai dengan beberapa kriteria kecepatan yang berbeda-beda pada suatu proyek konstruksi. Kriteria kecepatan terbagi menjadi empat berdasarkan besarnya kecepatan jib dan kecepatan trolley. Letak lokasi dengan total travel time terkecil akan diambil sebagai hasil akhir. Kriteria-kriteria kecepatan yang berbeda disimulasi akan membuat total travel time berubah.

Sign in / Sign up

Export Citation Format

Share Document