Preparation and Performance Testing of Foamed Concrete

2013 ◽  
Vol 743-744 ◽  
pp. 166-170
Author(s):  
Ting Song Yang ◽  
Ling Chao Lu ◽  
Shou De Wang ◽  
Chen Chen Gong
Keyword(s):  
Compressive Strength ◽  
Mixing Time ◽  
Performance Testing ◽  
Dry Density ◽  
Preparation Technology ◽  
Foaming Agent ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Foamed Concrete ◽  
And Performance

The key influences of foamed concrete and the optimum preparation technology were studied. The performance of foamed concrete was analyzed by the compressive strength testing, SEM. Results show that the flowability of cement paste is good when water-cement ratio is 0.4. The amount of foam added in sulphoaluminate cement is not able to exceed 3.5L/kg. However, the dilution multiple of foaming agent is near concentration and the mixing time depends on the foam quantity. When the water-cement ratio is 0.4, the foam quantity is 3 L/kg and the foaming agent is diluted 30 times. When the mixing time is 60s, the dry density is around 380kg/m3 and the 7d compressive strength reaches to 0.9MPa.

scholarly journals Effect of Phenolic Particles on Mechanical and Thermal Conductivity of Foamed Sulphoaluminate Cement-Based Materials

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3596 ◽  
Author(s):  
Xiuzhi Zhang ◽  
Qing Yang ◽  
Qinfei Li ◽  
Heng Chen ◽  
Guofa Zheng ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Pore Structure ◽  
Dry Density ◽  
Mechanical And Thermal Properties ◽  
Foaming Agent ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Performance Indexes ◽  
Foamed Concrete ◽  
Inorganic Matrix

Foamed concrete materials based on sulpoaluminate cement were prepared by the chemical foaming method. The effects of water–cement ratio, foaming agent, and foaming stabilizer on the mechanical and thermal properties of foamed concrete were studied. Meanwhile, a portion of cement was replaced with foamed phenolic particles to further optimize the performance of foamed concrete; the results show that when the water–cement ratio was 0.53, the foaming agent content was 5%, the foam stabilizer was 1%, and the substitution of phenolic particles was 20%, the performance indexes of foamed concrete were the best. Methods, describing briefly the main methods or treatments applied: dry density was 278.4 kg/m3, water absorption was 19.9%, compressive strength was 3.01 MPa, and thermal conductivity was 0.072 W/(m·K). By the pore structure analysis of the foamed concrete suing Micro-CT, it was found that when the replacement amount of phenolic particles was 20%, the pore size of foamed concrete was relatively uniform, the minimum D90 was 225 μm respectively. The combination of organic and inorganic matrix and optimized pore structure improved the performance of foamed concrete.

scholarly journals Water-Cement-Density Ratio Law for the 28-Day Compressive Strength Prediction of Cement-Based Materials

2020 ◽  
Vol 2020 ◽  
pp. 1-8 ◽  
Author(s):  
Siqi Li ◽  
Jinbo Yang ◽  
Peng Zhang
Keyword(s):  
Compressive Strength ◽  
Apparent Density ◽  
Density Ratio ◽  
Strength Prediction ◽  
Normal Concrete ◽  
Present Contribution ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Cement Based Materials ◽  
Foamed Concrete

In the present contribution, the water-cement-density ratio law for the standard curing 28-day compressive strength of cement-based materials including grout, normal concrete, ceramsite concrete, and foamed concrete is proposed. The standard curing 28-day compressive strength of different grouts, normal concrete, ceramsite concrete, and foamed concrete was tested. Simulations for Abrams’ law, Bolomey’s formula, and water-cement-density ratio law were carried out and compared. The water-cement-density ratio law illustrates better simulations for the prediction of the 28-day compressive strength of cement-based materials. The water-cement-density ratio law includes both the water-cement ratio and relative apparent density of the cement-based material. Relative apparent density of the cement-based material is an important one of all the factors determining the compressive strength of the cement-based material. The water-cement-density ratio law will be beneficial for the precise and generalized prediction of the 28-day standard curing compressive strength of cement-based materials.

Research on the Performance of Plaster Material by Chemical Foaming Method

2013 ◽  
Vol 830 ◽  
pp. 435-438
Author(s):  
Hong Xia Wang ◽  
Bo Liu ◽  
Kuang Ping Yuan ◽  
Wu Biao Duan ◽  
Fei Hua Yang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Water Temperature ◽  
Chemical Reaction ◽  
Raw Material ◽  
Foaming Agent ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Chemical Foaming

The paper introduces a kind of foaming plaster with main raw material of α- gypsum, which is produced by utilizing the chemical reaction principles H2O2 was decomposed. Meanwhile，study the changes of density，flexural strength and compressive strength of plaster material performance with the additives in different ratio. The result showed that water-cement ratio, H2O2 foaming agent and water temperature all affect the performance of the foaming plaster.

Study on the Physical and Mechanical Performance of Graphite Foamed Cement-Based Material

2015 ◽  
Vol 1089 ◽  
pp. 265-269 ◽  
Author(s):  
Jun Liu ◽  
Xiang Mei Meng ◽  
Hong Tao Mu
Keyword(s):  
Hydrogen Peroxide ◽  
Compressive Strength ◽  
Mechanical Performance ◽  
Sodium Sulfite ◽  
Orthogonal Test ◽  
Dry Density ◽  
Foam Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Influence Of Water

To figure out the physical and mechanical performance of graphite foam concrete，orthogonal test was applied to ascertain four factors for graphite foamed cement-based material (GFCBM). The influence of water cement ratio, graphite content, hydrogen peroxide content and sodium sulfite content on the dry density, porosity and compressive strength was also discussed. The results show that sodium sulfite has a relatively significant effect on the physical and mechanical performance. The dry density and compressive strength increases first and then decrease with the water cement ratio, adding of hydrogen peroxide and sodium sulfite increasing and increase with adding of the graphite. The trend of porosity is opposite to the dry density and compressive strength. The optimal scheme for this experiment is water cement ratio 0.68, 5% graphite, 8% hydrogen peroxide and 6% sodium sulfate.

scholarly journals Characteristics of Lightweight Concrete Based on a Synthetic Polymer Foaming Agent

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4979 ◽  
Author(s):  
Marta Kadela ◽  
Alfred Kukiełka ◽  
Marcin Małek
Keyword(s):  
Compressive Strength ◽  
Lightweight Concrete ◽  
Synthetic Polymer ◽  
Dry Density ◽  
Foaming Agent ◽  
Polymer Foaming ◽  
Foamed Concrete ◽  
The Difference ◽  
Creep Deformations

The components of foamed concrete have a significant effect on its properties. Protein-based foamed concrete is used much more often. This study aims to assess the properties of foamed concrete with a density of around 500, 700, 800 and 1000 kg/m3 formed by using a synthetic polymer-based foaming agent. The distribution of pores, wet and dry density and compressive strengths were evaluated. In addition, the creep deformations of foamed concrete with different densities were measured. The difference in density of up to 170 kg/m3 for the highest densities was obtained. Foamed concrete with higher densities (700 and 800 kg/m3) showed similar characteristics of pores, which were different from those of samples with a density of 500 kg/m3. Compressive strength equal to 5.9 ± 0.2, 5.1 ± 0.2, 3.8 ± 0.3 and 1.4 ± 0.2 MPa was obtained for foamed concrete with a density of 500, 700, 800 and 1000 kg/m3, respectively. The obtained compressive strengths were higher than those found in the literature for the foamed concrete with the same densities. With increasing density, smaller creep deformations were obtained. Creep deformations were 509, 495 and 455 με for samples with densities of around 500, 700 and 1000 kg/m3 respectively. Deformation under long-term loading took place up to 90 days, regardless of the density of the foamed concrete.

scholarly journals Use of Nondestructive Testing of Ultrasound and Artificial Neural Networks to Estimate Compressive Strength of Concrete

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 44
Author(s):  
Fernando A. N. Silva ◽  
João M. P. Q. Delgado ◽  
Rosely S. Cavalcanti ◽  
António C. Azevedo ◽  
Ana S. Guimarães ◽  
...  
Keyword(s):  
Neural Networks ◽  
Compressive Strength ◽  
Artificial Neural Networks ◽  
Cross Sections ◽  
Influential Factors ◽  
Average Error ◽  
Ann Model ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Artificial Neural

The work presents the results of an experimental campaign carried out on concrete elements in order to investigate the potential of using artificial neural networks (ANNs) to estimate the compressive strength based on relevant parameters, such as the water–cement ratio, aggregate–cement ratio, age of testing, and percentage cement/metakaolin ratios (5% and 10%). We prepared 162 cylindrical concrete specimens with dimensions of 10 cm in diameter and 20 cm in height and 27 prismatic specimens with cross sections measuring 25 and 50 cm in length, with 9 different concrete mixture proportions. A longitudinal transducer with a frequency of 54 kHz was used to measure the ultrasonic velocities. An ANN model was developed, different ANN configurations were tested and compared to identify the best ANN model. Using this model, it was possible to assess the contribution of each input variable to the compressive strength of the tested concretes. The results indicate an excellent performance of the ANN model developed to predict compressive strength from the input parameters studied, with an average error less than 5%. Together, the water–cement ratio and the percentage of metakaolin were shown to be the most influential factors for the compressive strength value predicted by the developed ANN model.

scholarly journals Relation between Density and Compressive Strength of Foamed Concrete

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2967
Author(s):  
Rokiah Othman ◽  
Ramadhansyah Putra Jaya ◽  
Khairunisa Muthusamy ◽  
MohdArif Sulaiman ◽  
Youventharan Duraisamy ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Building Materials ◽  
Bleaching Earth ◽  
Concrete Specimen ◽  
Control Specimen ◽  
Dilution Ratio ◽  
Sustainable Building ◽  
Cement Ratio ◽  
Foamed Concrete ◽  
Partial Cement Replacement

This study aims to obtain the relationship between density and compressive strength of foamed concrete. Foamed concrete is a preferred building material due to the low density of its concrete. In foamed concrete, the compressive strength reduces with decreasing density. Generally, a denser foamed concrete produces higher compressive strength and lower volume of voids. In the present study, the tests were carried out in stages in order to investigate the effect of sand–cement ratio, water to cement ratio, foam dosage, and dilution ratio on workability, density, and compressive strength of the control foamed concrete specimen. Next, the test obtained the optimum content of processed spent bleaching earth (PSBE) as partial cement replacement in the foamed concrete. Based on the experimental results, the use of 1:1.5 cement to sand ratio for the mortar mix specified the best performance for density, workability, and 28-day compressive strength. Increasing the sand to cement ratio increased the density and compressive strength of the mortar specimen. In addition, in the production of control foamed concrete, increasing the foam dosage reduced the density and compressive strength of the control specimen. Similarly with the dilution ratio, the compressive strength of the control foamed concrete decreased with an increasing dilution ratio. The employment of PSBE significantly influenced the density and compressive strength of the foamed concrete. An increase in the percentage of PSBE reduced the density of the foamed concrete. The compressive strength of the foamed concrete that incorporated PSBE increased with increasing PSBE content up to 30% PSBE. In conclusion, the compressive strength of foamed concrete depends on its density. It was revealed that the use of 30% PSBE as a replacement for cement meets the desired density of 1600 kg/m3, with stability and consistency in workability, and it increases the compressive strength dramatically from 10 to 23 MPa as compared to the control specimen. Thus, it demonstrated that the positive effect of incorporation of PSBE in foamed concrete is linked to the pozzolanic effect whereby more calcium silicate hydrate (CSH) produces denser foamed concrete, which leads to higher strength, and it is less pore connected. In addition, the regression analysis shows strong correlation between density and compressive strength of the foamed concrete due to the R2 being closer to one. Thus, production of foamed concrete incorporating 30% PSBE might have potential for sustainable building materials.

Study on Preparation of Solid Concrete Brick with Recycled Aggregate

2013 ◽  
Vol 648 ◽  
pp. 108-111
Author(s):  
Qi Jin Li ◽  
Guo Zhong Li
Keyword(s):  
Compressive Strength ◽  
Mass Fraction ◽  
Recycled Aggregate ◽  
Preparation Process ◽  
Mass Ratio ◽  
Construction Waste ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Optimal Value

The construction waste was processed into recycled aggregate to produce solid construction waste brick with grade of MU20. The preparation process of recycled aggregate and the optimal value of mass ratio of water to cement (water cement ratio) and mass ratio of recycled aggregate to cement was studied. The results shows that when the water cement ratio is 0.86 and the mass ratio of recycled aggregate to cement is 5.5 and the dosage of activator is 0.25% (mass fraction with recycled aggregate), the compressive strength of sample is 22.5MPa and can be satisfied with the requirement of MU20 solid concrete brick.

scholarly journals Influence of Aggregate Gradation on the Engineering Properties of Lightweight Aggregate Concrete

2018 ◽  
Vol 8 (8) ◽  
pp. 1324 ◽  
Author(s):  
How-Ji Chen ◽  
Chung-Hao Wu
Keyword(s):  
Compressive Strength ◽  
Lightweight Aggregate ◽  
Normal Weight ◽  
Engineering Properties ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Gradation ◽  
Aggregate Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Expanded Shale

Expanded shale lightweight aggregates, as the coarse aggregates, were used to produce lightweight aggregate concrete (LWAC) in this research. At the fixed water-cement ratio, paste quantity, and aggregate volume, the effects of various aggregate gradations on the engineering properties of LWAC were investigated. Comparisons to normal-weight concrete (NWC) made under the same conditions were carried out. From the experimental results, using normal weight aggregates that follow the specification requirements (standard gradation) obtained similar NWC compressive strength to that using uniform-sized aggregates. However, the compressive strength of LWAC made using small uniform-sized aggregates was superior to that made from standard-grade aggregates. This is especially conspicuous under the low water-cement ratio. Even though the workability was affected, this problem could be overcome with developed chemical additive technology. The durability properties of concrete were approximately equal. Therefore, it is suggested that the aggregate gradation requirement of LWAC should be distinct from that of NWC. In high strength LWAC proportioning, following the standard gradation suggested by American Society for Testing and Materials (ASTM) is optional.

Sign in / Sign up

Export Citation Format

Share Document