Ultra Fine Pitch RDL Development in Multi-layer eWLB (embedded Wafer Level BGA) Packages

2015 ◽  
Vol 2015 (1) ◽  
pp. 000822-000826 ◽  
Author(s):  
Won Kyoung Choi ◽  
Duk Ju Na ◽  
Kyaw Oo Aung ◽  
Andy Yong ◽  
Jaesik Lee ◽  
...  
Keyword(s):  
High Performance ◽  
Process Development ◽  
Cost Effective ◽  
Access Point ◽  
Data Access ◽  
Memory Device ◽  
Logic Device ◽  
Wafer Level ◽  
Component Level ◽  
Fine Pitch

The market for portable and mobile data access devices connected to a virtual cloud access point is exploding and driving increased functional convergence as well as increased packaging complexity and sophistication. This is creating unprecedented demand for higher input/output (I/O) density, higher bandwidths and low power consumption in smaller package sizes. There are exciting interconnect technologies in wafer level packaging such as eWLB (embedded Wafer Level Ball Grid Array), 2.5D interposers, thin PoP (Package-on-Package) and TSV (Through Silicon Via) interposer solutions to meet these needs. eWLB technologies with the ability to extend the package size beyond the area of the chip are leading the way to the next level of high density, thin packaging capability. eWLB provides a robust packaging platform supporting very dense interconnection and routing of multiple die in very reliable, low profile, low warpage 2.5D and 3D solutions. The use of these embedded eWLB packages in a side-by-side configuration to replace a stacked package configuration is critical to enable a more cost effective mobile market capability. Combining the analog or memory device with digital logic device in a semiconductor package can provide an optimum solution for achieving the best performance in thin, multiple-die integration aimed at very high performance. This paper highlights the rapidly moving trend towards eWLB packaging technologies with ultra fine 2/2μm line width and line spacing and multi-layer RDL. A package design study, process development and optimization, and mechanical characterization will be discussed as well as test vehicle preparation. JEDEC component level reliability test results will also be presented.

Ultra Fine Pitch RDL Development in Multi-layer eWLB (embedded Wafer Level BGA) Packages

2016 ◽  
Vol 2016 (DPC) ◽  
pp. 000809-000825
Author(s):  
Bernard Adams ◽  
Won Kyung Choi ◽  
Duk Ju Na ◽  
Andy Yong ◽  
Seung Wook Yoon ◽  
...  
Keyword(s):  
Line Width ◽  
High Performance ◽  
Process Development ◽  
Data Access ◽  
Electrical Performance ◽  
Logic Device ◽  
Wafer Level ◽  
Component Level ◽  
Wafer Level Packaging ◽  
Fine Pitch

The market for portable and mobile data access devices connected to a virtual cloud access point is exploding and driving increased functional convergence as well as increased packaging complexity and sophistication. This is creating unprecedented demand for higher input/output (I/O) density, higher bandwidths and low power consumption in smaller package sizes. There are exciting interconnect technologies in wafer level packaging such as eWLB (embedded Wafer Level Ball Grid Array), 2.5D interposers, thin PoP (Package-on-Package) and TSV (Through Silicon Via) interposer solutions to meet these needs. eWLB technologies with the ability to extend the package size beyond the area of the chip are leading the way to the next level of high density, thin packaging capability. eWLB provides a robust packaging platform supporting very dense interconnection and routing of multiple die in very reliable, low profile, low warpage 2.5D and 3D solutions. The use of these embedded eWLB packages in a side-by-side configuration to replace a stacked package configuration is critical to enable a more cost effective mobile market capability. Combining the analog or memory device with digital logic device in a semiconductor package can provide an optimum solution for achieving the best performance in thin, multiple-die integration aimed at very high performance. One of the greatest challenges facing wafer level packaging at present is the availability of routing and interconnecting high I/O fine pitch area array. RDL (redistribution layer) allows signal and supply I/O's to be redistributed to a footprint larger than the chip footprint in eWLB . Required line widths and spacing of 2/2 μm for eWLB applications support the bump pitch of less than 40um. Finer line width and spacing are critical for further design flexibility as well as electrical performance improvement. This paper highlights the rapidly moving trend towards eWLB packaging technologies with ultra fine 2/2um line width and line spacing and multi-layer RDL. A package design study, process development and optimization, and mechanical characterization will be discussed as well as test vehicle preparation. JEDEC component level reliability test results will also be presented.

No Flow Underfill Process Development for Fine Pitch Flip Chip Silicon to Silicon Wafer Level Integration

2010 ◽  
Vol 2010 (DPC) ◽  
pp. 000708-000735 ◽  
Author(s):  
Zhaozhi Li ◽  
John L. Evans ◽  
Paul N. Houston ◽  
Brian J. Lewis ◽  
Daniel F. Baldwin ◽  
...  
Keyword(s):  
High Performance ◽  
Flip Chip ◽  
Process Development ◽  
Low Cost ◽  
Three Dimensional ◽  
High Yield ◽  
Process Time ◽  
Assembly Process ◽  
Wafer Level ◽  
Fine Pitch

The industry has witnessed the adoption of flip chip for its low cost, small form factor, high performance and great I/O flexibility. As the Three Dimensional (3D) packaging technology moves to the forefront, the flip chip to wafer integration, which is also a silicon to silicon assembly, is gaining more and more popularity. Most flip chip packages require underfill to overcome the CTE mismatch between the die and substrate. Although the flip chip to wafer assembly is a silicon to silicon integration, the underfill is necessary to overcome the Z-axis thermal expansion as well as the mechanical impact stresses that occur during shipping and handling. No flow underfill is of special interest for the wafer level flip chip assembly as it can dramatically reduce the process time as well as bring down the average package cost since there is a reduction in the number of process steps and the dispenser and cure oven that would be necessary for the standard capillary underfill process. Chip floating and underfill outgassing are the most problematic issues that are associated with no flow underfill applications. The chip floating is normally associated with the size/thickness of the die and volume of the underfill dispensed. The outgassing of the no flow underfill is often induced by the reflow profile used to form the solder joint. In this paper, both issues will be addressed. A very thin, fine pitch flip chip and 2x2 Wafer Level CSP tiles are used to mimic the assembly process at the wafer level. A chip floating model will be developed in this application to understand the chip floating mechanism and define the optimal no flow underfill volume needed for the process. Different reflow profiles will be studied to reduce the underfill voiding as well as improve the processing yield. The no flow assembly process developed in this paper will help the industry understand better the chip floating and voiding issues regarding the no flow underfill applications. A stable, high yield, fine pitch flip chip no flow underfill assembly process that will be developed will be a very promising wafer level assembly technique in terms of reducing the assembly cost and improving the throughput.

Assembly Process Development for Fine Pitch Flip Chip Silicon-to-Silicon 3D Wafer Level Integration with No Flow Underfill

2010 ◽  
Vol 7 (3) ◽  
pp. 146-151 ◽  
Author(s):  
Zhaozhi Li ◽  
Sangil Lee ◽  
Brian J. Lewis ◽  
Paul N. Houston ◽  
Daniel F. Baldwin ◽  
...  
Keyword(s):  
High Performance ◽  
Flip Chip ◽  
Process Development ◽  
Low Cost ◽  
Three Dimensional ◽  
Process Time ◽  
Wafer Level ◽  
Fine Pitch ◽  
3D Packaging ◽  
Small Form Factor

The industry has witnessed the adoption of the flip chip for its low cost, small form factor, high performance, and great I/O flexibility. As three-dimensional (3D) packaging technology moves to the forefront, the flip chip to wafer integration, which is also a silicon-to-silicon assembly, is gaining more and more popularity. No flow underfill is of special interest for the wafer level flip chip assembly, as it can dramatically reduce the process time and the cost per package, due to the reduction in the number of process steps as well as the dispenser and cure oven that would otherwise be necessary for the standard capillary underfill process. This paper introduces the development of a no flow underfill process for a sub-100 micron pitch flip chip to CSP wafer level assembly. Challenges addressed include the no flow underfill reflow profile study, underfill dispense amount study, chip floating control, underfill voiding reduction, and yield improvement. Also, different no flow underfill candidates were investigated to determine the best performing processing material.

Cost Effective and High Performance 28nm FPGA with New Disruptive Silicon-Less Interconnect Technology (SLIT)

2014 ◽  
Vol 2014 (1) ◽  
pp. 000599-000605 ◽  
Author(s):  
Woon-Seong Kwon ◽  
Suresh Ramalingam ◽  
Xin Wu ◽  
Liam Madden ◽  
C. Y. Huang ◽  
...  
Keyword(s):  
High Performance ◽  
Process Integration ◽  
Cost Effective ◽  
Disruptive Innovation ◽  
Design Rule ◽  
Wind Condition ◽  
Silicon Etching ◽  
Wafer Level ◽  
Effective Manner ◽  
Interconnect Technology

This paper introduces the first comprehensive demonstration of new disruptive innovation technology comprising multiple Xilinx patent-pending innovations for highly cost effective and high performance Xilinx FPGA, which is so called stack silicon-less interconnect technology (SLIT) that provides the equivalent high-bandwidth connectivity and routing design-rule as stack silicon interconnect (SSI) technology at a cost-effective manner. We have successfully demonstrated the overall process integration and functions of our new SLIT-employed package using Virtex® -7 2000T FPGA product. Chip-to-Wafer stacking, wafer level flux cleaning, micro-bump underfilling, mold encapsulation are newly developed. Of all technology elements, both full silicon etching with high etch selectivity to dielectric/fast etch rate and wafer warpage management after full silicon etching are most crucial elements to realize the SLIT technology. In order to manage the wafer warpage after full Si removal, a couple of knobs are identified and employed such as top reinforcement layer, micro-bump underfill properties tuning, die thickness/die-to-die space/total thickness adjustments. It's also discussed in the paper how the wafer warpage behaves and how the wafer warpge is managed. New SLIT module shows excellent warpage characteristics of only −30 μm ~ −40 μm at room temperature for 25 mm × 31 mm in size and +20 μm ~ +25 μm at reflow temperature. Thermal simulation results shows that thermal resistance of new SLIT package is almost comparable to that of standard 2000T FCBGA package using TSV interposer with standard heat sink configuration and air wind condition. The reliability assessment is now under the study.

New Stacked Die Interconnect Technology for High-Performance and Low-Cost FPGA

2015 ◽  
Vol 12 (3) ◽  
pp. 111-117
Author(s):  
Woon-Seong Kwon ◽  
Suresh Ramalingam ◽  
Xin Wu ◽  
Liam Madden ◽  
C. Y. Huang ◽  
...  
Keyword(s):  
High Performance ◽  
Flip Chip ◽  
Process Integration ◽  
Cost Effective ◽  
Design Rule ◽  
Innovative Technology ◽  
Wind Condition ◽  
Wafer Level ◽  
Effective Manner ◽  
Interconnect Technology

This article introduces the first comprehensive demonstration of new innovative technology comprising multiple key technologies for highly cost-effective and high-performance Xilinx field programmable gate array (FPGA), which is so-called stack silicon-less interconnect technology (SLIT) that provides the equivalent high-bandwidth connectivity and routing design-rule as stack silicon interconnect (SSI) technology at a cost-effective manner. We have successfully demonstrated the overall process integration and functions of our new SLIT-employed package using Virtex®-7 2000T FPGA product with chip-to-wafer stacking, wafer-level flux cleaning, microbump underfilling, mold encapsulation, and backside silicon removal. Of all technology elements, both full silicon removal process with faster etching and no dielectric layer damage and wafer warpage management after full silicon etching are most crucial elements to realize the SLIT technology. To manage the wafer warpage after full Si removal, a couple of knobs are identified and used such as top reinforcement layer, microbump underfill properties tuning, die thickness, die-to-die space, and total thickness adjustments. It is also discussed in the article how the wafer warpage behaves and how the wafer warpage is managed. New SLIT module shows excellent warpage characteristics of only −30 μm ∼ −40 μm at room temperature (25°C) for 25 mm × 31 mm in size and +20 μm ∼ +25 μm at reflow temperature (250°C). Thermal simulation results shows that thermal resistance of new SLIT package is almost comparable to that of standard 2000T flip-chip ball grid array (FC-BGA) package using through silicon via interposer with standard heat sink configuration and air wind condition. The reliability assessment is now under the study.

Wafer Level Assembly Technique Development for Fine Pitch Flip Chip 3D Die-to-Wafer Integration

2010 ◽  
Vol 2010 (1) ◽  
pp. 000548-000553
Author(s):  
Zhaozhi Li ◽  
Brian J. Lewis ◽  
Paul N. Houston ◽  
Daniel F. Baldwin ◽  
Eugene A. Stout ◽  
...  
Keyword(s):  
Flip Chip ◽  
Low Cost ◽  
Three Dimensional ◽  
Cost Effective ◽  
Market Demand ◽  
Wafer Level ◽  
Packaging Technology ◽  
Fine Pitch ◽  
3D Packaging ◽  
Assembly Technique

Three Dimensional (3D) Packaging has become an industry obsession as the market demand continues to grow toward higher packaging densities and smaller form factor. In the meanwhile, the 3D die-to-wafer (D2W) packaging structure is gaining popularity due to its high manufacturing throughput and low cost per package. In this paper, the development of the assembly process for a 3D die-to-wafer packaging technology, that leverages the wafer level assembly technique and flip chip process, is introduced. Research efforts were focused on the high-density flip chip wafer level assembly techniques, as well as the challenges, innovations and solutions associated with this type of 3D packaging technology. Processing challenges and innovations addressed include flip chip fluxing methods for very fine-pitch and small bump sizes; wafer level flip chip assembly program creation and yield improvements; and set up of the Pb-free reflow profile for the assembled wafer. 100% yield was achieved on the test vehicle wafer that has totally 1,876 flip chip dies assembled on it. This work has demonstrated that the flip chip 3D die-to-wafer packaging architecture can be processed with robust yield and high manufacturing throughput, and thus to be a cost effective, rapid time to market alternative to emerging 3D wafer level integration methodologies.

Bio4j: a high-performance cloud-enabled graph-based data platform

2015 ◽  
Author(s):  
Pablo Pareja-Tobes ◽  
Raquel Tobes ◽  
Marina Manrique ◽  
Eduardo Pareja ◽  
Eduardo Pareja-Tobes
Keyword(s):  
High Performance ◽  
Cost Effective ◽  
Data Access ◽  
Biological Data ◽  
Biological Knowledge ◽  
Graph Models ◽  
Domain Specific ◽  
Data Querying ◽  
Knowledge Intensive ◽  
Rich Data

Background. Next Generation Sequencing and other high-throughput technologies have brought a revolution to the bioinformatics landscape, by offering sheer amounts of data about previously unaccessible domains in a cheap and scalable way. However, fast, reproducible, and cost-effective data analysis at such scale remains elusive. A key need for achieving it is being able to access and query the vast amount of publicly available data, specially so in the case of knowledge-intensive, semantically rich data: incredibly valuable information about proteins and their functions, genes, pathways, or all sort of biological knowledge encoded in ontologies remains scattered, semantically and physically fragmented. Methods and Results. Guided by this, we have designed and developed Bio4j. It aims to offer a platform for the integration of semantically rich biological data using typed graph models. We have modeled and integrated most publicly available data linked with proteins into a set of interdependent graphs. Data querying is possible through a data model aware Domain Specific Language implemented in Java, letting the user write typed graph traversals over the integrated data. A ready to use cloud-based data distribution, based on the Titan graph database engine is provided; generic data import code can also be used for in-house deployment. Conclusion. Bio4j represents a unique resource for the current Bioinformatician, providing at once a solution for several key problems: data integration; expressive, high performance data access; and a cost-effective scalable cloud deployment model.

A Lithography-Based Compliant Chip-to-Substrate Wafer-Level Interconnect

2002 ◽  
Author(s):  
Qi Zhu ◽  
Lunyu Ma ◽  
Suresh K. Sitaraman
Keyword(s):  
High Performance ◽  
Coefficient Of Thermal Expansion ◽  
Low Cost ◽  
Optimization Technique ◽  
Cost Effective ◽  
Organic Substrate ◽  
Electrical Performance ◽  
Wafer Level ◽  
Good Reliability ◽  
Mechanical Compliance

As the rapid advances in IC design and fabrication continue to challenge and push the electronic packaging technology, in terms of fine pitch, high performance, low cost, and good reliability, compliant interconnects show great advantages for next-generation packaging. β-fly is designed as a compliant chip-to-substrate interconnect for performing wafer-level probing and for packaging without underfill. β-fly has good compliance in all directions to compensate the coefficient of thermal expansion (CTE) mismatch between the silicon die and an organic substrate. The fabrication of β-fly is similar to standard IC fabrication, and wafer-level packaging makes it cost effective. In this work, self-weight effect and stress distribution under planar displacement loading of β-fly is studied. The effect of geometry parameters on mechanical and electrical performance of β-fly is also studied. β-fly with thinner and narrower arcuate beams with larger radius and taller post is found to have better mechanical compliance. In addition to mechanical compliance, electrical characteristics of β-fly have also been studied in this work. However, it is found that structures with excellent mechanical compliance cannot have good electrical performance. Therefore, a trade off is needed for the design of β-fly. Response surface methodology and an optimization technique have been used to select the optimal β-fly structure parameters.

Sign in / Sign up

Export Citation Format

Share Document