scholarly journals Investigation of the Psychological factors determining the Magnitude of Auditory Sensation

1975 ◽  
Author(s):  
L. C. De Jager
Keyword(s):  
Psychological Factors ◽  
Future Research ◽  
Experimental Conditions ◽  
Method Of Constant Stimuli ◽  
Female Subjects

This research deals with some psychological factors that may influence the determination of the magnitude of auditory sensation or pure loudness. Several factors and their influences are discussed. 17 Male and 3 female subjects between 18 and 26 years of age were tested under several different experimental conditions using the method of constant stimuli. Results are discussed in terms of both future research and implications for industry. OpsommingTwintig toetslinge, 17 mans en 3 dames, tussen die ouderdomme 18 en 26 jaar is onder verskillende eksperimentele situasies getoets om die invloed van 'n aantal sielkundige faktore op die bepaling van luidheid te bepaal. Die metode van konstante stimuli is gebruik om die luidheidspeil onder die verskillende eksperimentele situasies te verkry. Die resultate van die ondersoek word bespreek in terme van toekomstige navorsing op hierdie gebied asook die implikasies wat dit vir die bedryf inhou.

Antithrombin-mediated Inhibition of Factor Vlla-Tissue Factor Complex by the Synthetic Pentasaccharide Representing the Heparin Binding Site to Antithrombin

1996 ◽  
Vol 76 (01) ◽  
pp. 005-008 ◽  
Author(s):  
Jean Claude Lormeau ◽  
Jean Pascal Herault ◽  
Jean Marc Herbert
Keyword(s):  
Binding Site ◽  
Tissue Factor ◽  
Residual Activity ◽  
Coagulation Factors ◽  
Heparin Binding ◽  
Experimental Conditions ◽  
First Order ◽  
Heparin Binding Site ◽  
Coagulant Activity

SummaryWe examined the effect of the synthetic pentasaccharide representing the minimal binding site of heparin to antithrombin on the antithrombin-mediated inactivation of factor Vila bound to tissue factor. This effect was compared to the effect of unfractionated heparin. Using purified recombinant human coagulation factors and either a clotting or an amidolytic assay for the determination of the residual activity of factor Vila, we showed that the pentasaccharide was an efficient antithrombin-dependent inhibitor of the coagulant activity of tissue factor-factor Vila complex. In our experimental conditions, assuming a mean MW of 14,000 for heparin, the molar pseudo-first order rate constants for ATIII-mediated FVIIa inhibition by ATIII-binding heparin and by the synthetic pentasaccharide were found to be similar with respective values of 104,000 ± 10,500 min-1 and 112,000 ± 12,000 min-1 (mean ± s.e.m., n = 3)

Determination of alcohols in mixtures by 19F NMR spectroscopy using hexefluoroacetone reagent

1982 ◽  
Vol 47 (7) ◽  
pp. 1973-1978 ◽  
Author(s):  
Jiří Karhan ◽  
Zbyněk Ksandr ◽  
Jiřina Vlková ◽  
Věra Špatná
Keyword(s):  
Standard Deviation ◽  
Nmr Spectroscopy ◽  
Standard Method ◽  
Internal Standard ◽  
Internal Standard Method ◽  
Concentration Region ◽  
Experimental Conditions ◽  
Curve Method ◽  
Sample Preparation Procedure

The determination of alcohols by 19F NMR spectroscopy making use of their reaction with hexafluoroacetone giving rise to hemiacetals was studied on butanols. The calibration curve method and the internal standard method were used and the results were mutually compared. The effects of some experimental conditions, viz. the sample preparation procedure, concentration, spectrometer setting, and electronic integration, were investigated; the conditions, particularly the concentrations, proved to have a statistically significant effect on the results of determination. For the internal standard method, the standard deviation was 0.061 in the concentration region 0.032-0.74 mol l-1. The method was applied to a determination of alcohols in the distillation residue from an oxo synthesis.

scholarly journals Software-guided microscale flow calorimeter for efficient acquisition of thermokinetic data

2021 ◽  
Author(s):  
Timothy Aljoscha Frede ◽  
Marlene Dietz ◽  
Norbert Kockmann
Keyword(s):  
Design Of Experiments ◽  
Process Development ◽  
Reaction Conditions ◽  
Experimental Conditions ◽  
Flow Calorimeter ◽  
Microscale Flow ◽  
Increased Sensitivity ◽  
Important Time ◽  
Optimal Reaction

AbstractFast chemical process development is inevitably linked to an optimized determination of thermokinetic data of chemical reactions. A miniaturized flow calorimeter enables increased sensitivity when examining small amounts of reactants in a short time compared to traditional batch equipment. Therefore, a methodology to determine optimal reaction conditions for calorimetric measurement experiments was developed and is presented in this contribution. Within the methodology, short-cut calculations are supplemented by computational fluid dynamics (CFD) simulations for a better representation of the hydrodynamics within the microreactor. This approach leads to the effective design of experiments. Unfavourable experimental conditions for kinetics experiments are determined in advance and therefore, need not to be considered during design of experiments. The methodology is tested for an instantaneous acid-base reaction. Good agreement of simulations was obtained with experimental data. Thus, the prediction of the hydrodynamics is enabled and the first steps towards a digital twin of the calorimeter are performed. The flow rates proposed by the methodology are tested for the determination of reaction enthalpy and showed that reasonable experimental settings resulted. Graphical abstract A methodology is suggested to evaluate optimal reaction conditions for efficientacquisition of kinetic data. The experimental design space is limited by thestepwise determination of important time scales based on specified input data.

How Might We Screen for Psychological Factors in People With Pelvic Pain? An e-Delphi Study

2021 ◽  
Author(s):  
Angela Pontifex ◽  
Caris Savin ◽  
Caitlin Park ◽  
Alina Filipe Nunes ◽  
K Jane Chalmers ◽  
...  
Keyword(s):  
Focus Group ◽  
Pelvic Pain ◽  
Delphi Method ◽  
Delphi Study ◽  
Psychological Factors ◽  
Clinical Utility ◽  
Delphi Process ◽  
Future Research ◽  
Exclusion Criteria ◽  
Group Design

Abstract Objective Persistent pelvic pain is a complex condition often influenced by psychological factors that can alter treatment outcomes. These factors are potentially modifiable; however, currently there is no instrument to screen for them in these individuals. The purpose of this study was to determine (1) which psychological factors should be screened in individuals with persistent pelvic pain and (2) the most appropriate statements to represent these psychological factors. Methods The study used a focus group design followed by an electronic-Delphi (e-Delphi) process. A focus group consisting of 8 experts was conducted to determine the relevant psychological factors to screen. These results informed round 1 of the e-Delphi process, consisting of a panel of 14 pain/pelvic pain experts. The e-Delphi process consisted of 3 rounds of online surveys and 2 teleconference discussions to establish consensus on the most appropriate statement to screen for each of the psychological factors. Results The focus group identified 13 relevant psychological factors. During the e-Delphi process, relevant screening statements were assessed using a 100-point allocation system. Experts could reword and suggest new statements. Statements were assessed for consensus and stability and were eliminated as the rounds progressed if they met the exclusion criteria. At the termination of round 3, there were 15 statements remaining. Conclusions The final list of 15 statements will assist clinicians in screening for psychological factors and is an important step for clinicians in providing psychologically informed care to people with persistent pelvic pain. Future research should determine the psychometric properties of the statements to determine their clinical utility as a questionnaire. Impact This study has refined a list of statements to help screen for psychological factors in individuals with persistent pelvic pain. Developed robustly using an e-Delphi method, this list is an important first step forward for clinicians to provide psychologically informed care to these individuals.

scholarly journals Apparent Young’s Modulus of the Adhesive in Numerical Modeling of Adhesive Joints

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 328
Author(s):  
Kamil Anasiewicz ◽  
Józef Kuczmaszewski
Keyword(s):  
Numerical Model ◽  
Young’S Modulus ◽  
Adhesive Joint ◽  
Young's Modulus ◽  
Precise Determination ◽  
Adhesive Joints ◽  
Experimental Conditions ◽  
Element Simulation ◽  
Joint Material

This article is an evaluation of the phenomena occurring in adhesive joints during curing and their consequences. Considering changes in the values of Young’s modulus distributed along the joint thickness, and potential changes in adhesive strength in the cured state, the use of a numerical model may make it possible to improve finite element simulation effects and bring their results closer to experimental data. The results of a tensile test of a double overlap adhesive joint sample, performed using an extensometer, are presented. This test allowed for the precise determination of the shear modulus G of the cured adhesive under experimental conditions. Then, on the basis of the research carried out so far, a numerical model was built, taking the differences observed in the properties of the joint material into account. The stress distribution in a three-zone adhesive joint was analyzed in comparison to the standard numerical model in which the adhesive in the joint was treated as isotropic. It is proposed that a joint model with three-zones, differing in the Young’s modulus values, is more accurate for mapping the experimental results.

scholarly journals Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS

Toxins ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 133 ◽  
Author(s):  
Annika Jagels ◽  
Viktoria Lindemann ◽  
Sebastian Ulrich ◽  
Christoph Gottschalk ◽  
Benedikt Cramer ◽  
...  
Keyword(s):  
Secondary Metabolites ◽  
Future Research ◽  
Structural Modifications ◽  
Metabolite Profiles ◽  
The Individual ◽  
First Time ◽  
Analytical Standards ◽  
Respective Species

The genus Stachybotrys produces a broad diversity of secondary metabolites, including macrocyclic trichothecenes, atranones, and phenylspirodrimanes. Although the class of the phenylspirodrimanes is the major one and consists of a multitude of metabolites bearing various structural modifications, few investigations have been carried out. Thus, the presented study deals with the quantitative determination of several secondary metabolites produced by distinct Stachybotrys species for comparison of their metabolite profiles. For that purpose, 15 of the primarily produced secondary metabolites were isolated from fungal cultures and structurally characterized in order to be used as analytical standards for the development of an LC-MS/MS multimethod. The developed method was applied to the analysis of micro-scale extracts from 5 different Stachybotrys strains, which were cultured on different media. In that process, spontaneous dialdehyde/lactone isomerization was observed for some of the isolated secondary metabolites, and novel stachybotrychromenes were quantitatively investigated for the first time. The metabolite profiles of Stachybotrys species are considerably influenced by time of growth and substrate availability, as well as the individual biosynthetic potential of the respective species. Regarding the reported adverse effects associated with Stachybotrys growth in building environments, combinatory effects of the investigated secondary metabolites should be addressed and the role of the phenylspirodrimanes re-evaluated in future research.

Factors affecting in vitro and in vivo antioxidant effects. Experimental conditions and nature of oxidants determine antioxidant efficacy

2021 ◽  
pp. 1-9
Author(s):  
Etsuo Niki
Keyword(s):  
Biological Molecules ◽  
Experimental Conditions ◽  
Factors Affecting ◽  
Beneficial Effects ◽  
Multiple Oxidants ◽  
Antioxidant Effects

Reactive oxygen and nitrogen species have been implicated in the onset and progression of various diseases and the role of antioxidants in the maintenance of health and prevention of diseases has received much attention. The action and effect of antioxidants have been studied extensively under different reaction conditions in multiple media. The antioxidant effects are determined by many factors. This review aims to discuss several important issues that should be considered for determination of experimental conditions and interpretation of experimental results in order to understand the beneficial effects and limit of antioxidants against detrimental oxidation of biological molecules. Emphasis was laid on cell culture experiments and effects of diversity of multiple oxidants on antioxidant efficacy.

scholarly journals Validation of Reference Genes for Studying Different Abiotic Stresses in oat (Avena sativa L.) by RT-qPCR

Plants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1272
Author(s):  
Judit Tajti ◽  
Magda Pál ◽  
Tibor Janda
Keyword(s):  
Gene Expression ◽  
Avena Sativa ◽  
Abiotic Stresses ◽  
Reference Genes ◽  
Nutritional Value ◽  
Tissue Type ◽  
Future Research ◽  
Experimental Conditions ◽  
Expression Studies ◽  
Gene Expression Studies

Oat (Avena sativa L.) is a widely cultivated cereal with high nutritional value and it is grown mainly in temperate regions. The number of studies dealing with gene expression changes in oat continues to increase, and to obtain reliable RT-qPCR results it is essential to establish and use reference genes with the least possible influence caused by experimental conditions. However, no detailed study has been conducted on reference genes in different tissues of oat under diverse abiotic stress conditions. In our work, nine candidate reference genes (ACT, TUB, CYP, GAPD, UBC, EF1, TBP, ADPR, PGD) were chosen and analysed by four statistical methods (GeNorm, Normfinder, BestKeeper, RefFinder). Samples were taken from two tissues (leaves and roots) of 13-day-old oat plants exposed to five abiotic stresses (drought, salt, heavy metal, low and high temperatures). ADPR was the top-rated reference gene for all samples, while different genes proved to be the most stable depending on tissue type and treatment combinations. TUB and EF1 were most affected by the treatments in general. Validation of reference genes was carried out by PAL expression analysis, which further confirmed their reliability. These results can contribute to reliable gene expression studies for future research in cultivated oat.

scholarly journals Application of Bar Adsorptive Microextraction for the Determination of Levels of Tricyclic Antidepressants in Urine Samples

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3101
Author(s):  
Mariana N. Oliveira ◽  
Oriana C. Gonçalves ◽  
Samir M. Ahmad ◽  
Jaderson K. Schneider ◽  
Laiza C. Krause ◽  
...  
Keyword(s):  
Tricyclic Antidepressants ◽  
Matrix Effects ◽  
Activated Carbons ◽  
Process Efficiency ◽  
Gas Chromatography Mass Spectrometry ◽  
Selected Ion Monitoring ◽  
Experimental Conditions ◽  
Analytical Methodology ◽  
Low Efficiency

This work entailed the development, optimization, validation, and application of a novel analytical approach, using the bar adsorptive microextraction technique (BAμE), for the determination of the six most common tricyclic antidepressants (TCAs; amitriptyline, mianserin, trimipramine, imipramine, mirtazapine and dosulepin) in urine matrices. To achieve this goal, we employed, for the first time, new generation microextraction devices coated with convenient sorbent phases, polymers and novel activated carbons prepared from biomaterial waste, in combination with large-volume-injection gas chromatography-mass spectrometry operating in selected-ion monitoring mode (LVI-GC-MS(SIM)). Preliminary assays on sorbent coatings, showed that the polymeric phases present a much more effective performance, as the tested biosorbents exhibited low efficiency for application in microextraction techniques. By using BAμE coated with C18 polymer, under optimized experimental conditions, the detection limits achieved for the six TCAs ranged from 0.2 to 1.6 μg L−1 and, weighted linear regressions resulted in remarkable linearity (r2 > 0.9960) between 10.0 and 1000.0 μg L−1. The developed analytical methodology (BAμE(C18)/LVI-GC-MS(SIM)) provided suitable matrix effects (90.2–112.9%, RSD ≤ 13.9%), high recovery yields (92.3–111.5%, RSD ≤ 12.3%) and a remarkable overall process efficiency (ranging from 84.9% to 124.3%, RSD ≤ 13.9%). The developed and validated methodology was successfully applied for screening the six TCAs in real urine matrices. The proposed analytical methodology proved to be an eco-user-friendly approach to monitor trace levels of TCAs in complex urine matrices and an outstanding analytical alternative in comparison with other microextraction-based techniques.

scholarly journals Reaktive E=C(p–p)π Systeme, XXXIV Addition von Alkoholen oder primären Aminen an Phosphaalkene F3CP=C(F)OR. Neue Trifluormethylphosphane und -phosphaalkene/Reactive E = C( p – p ) π-Systems, XXXIV Addition of Alcohols or Primary Amines to Phosphaalkenes F3CP= C(F)OR . Novel Trifluoromethylphosphanes and Phosphaalkenes

1993 ◽  
Vol 48 (1) ◽  
pp. 58-67 ◽  
Author(s):  
Joseph Grobe ◽  
Duc Le Van ◽  
Gudrun Lange
Keyword(s):  
High Resolution Mass Spectrometry ◽  
Molar Ratio ◽  
Primary Amines ◽  
The Novel ◽  
Experimental Conditions ◽  
Pull System ◽  
Fragment Ions ◽  
New Compounds ◽  
C Nmr

The course of the reactions o f fluorophosphaalkenes F3CP = C (F)OR [R = Me (1), Et (2)] with methanol or ethanol strongly depends on the experimental conditions. Thus at 70 °C a mixture of the 2-phosphapropionic acid ester F3CP (H )CO2R [R = Me (3), Et (4)] and trifluoromethylphosphane H2PCF3 is formed [molar ratio: 3 or 4 /H2 CF3 ≈1/1]. If the precursors F3CP (H )CO2R [R = Me (3), Et) are used as starting materials, the reaction with ROH under the same conditions affords 3 and 4, respectively, (90 to 95% yield) with only traces of H2PCF 3. In the presence o f iPr2NH these precursors react with R′OH to give the novel trifluoromethylphosphaalkenes F3CP = C (OR )OR [R /R′: Me/Me (6); E t/E t (7); Me/Et (8)]. With Et2NH , 3 undergoes an addition/elimination process yielding the interesting push/pull system Et2N(F)C = P-CO2Me (5). 1 and 2 react with primary amines R′NH2 (R′= tBu, Me) with stereoselective formation of the fairly labile phosphaalkenes F3CP = C(OR)NHR′ [R /R′: Me/tBu (9), Et/tBu(10), Me/Me (11)] with trans-positions for CF3 and NHR′.The new compounds 3 -11 were characterized by spectroscopic investigations (1H , 19F, 31P, 13C NMR ; IR, MS) and determination of M+ or typical fragment ions [M+ -OR ] by high resolution mass spectrometry.

Sign in / Sign up

Export Citation Format

Share Document