Groat proportion in oats as measured by different methods: Analysis of oats resistant to dehulling and sources of error in mechanical dehulling
Groat proportion is the groat yield from an oat dehulling process. We compared hand, impact and compressed-air dehulling to measure groat proportion, and evaluated sources of error. Hand dehulling was the simplest and most accurate method, because all groats and hulls can be accounted for. Mechanical methods dehulled most, but not all, oat kernels. Failure to account for oats resistant to dehulling in calculations resulted in gross errors. Oats resistant to impact dehulling did not differ in groat proportion from the general population, but differed in many physical properties. Hull structure may account the most for their resistance to dehulling. Mechanically dehulled oats consistently yielded lower groat proportions than those from hand dehulling. Since the difference cannot be attributed to oats resistant to dehulling, groats must be lost during the aspiration process, common to all mechanical methods. Uniform aspiration protocols should provide a uniform error. All groat proportion values obtained here were highly correlated among themselves, except when values were not corrected for oats resistant to dehulling. A theoretical groat proportion calculated from the ratio of the mean groat mass (collected by any means available) and the mean kernel mass yielded a groat proportion value that did not differ significantly from the hand dehulling value.Key words: Oat milling, groat proportion, oat dehulling