scholarly journals Rancangan Kontrol dan Monitoring Constant Current Regulator (CCR) pada Precision Approach Path Indicator (PAPI) Menggunakan Android Berbasis Arduino di Bandar Udara Internasional Lombok

2017 ◽  
Vol 2 (2) ◽  
pp. 138-147
Author(s):  
Kustori Kustori ◽  
Zuris Nur Faiza Ningrum

Constant Current Regulator is a power supply used in the world of aviation for the provision of electric power in airport lighting systems. The electrical power supplied to the airport lighting lamp is maintained to provide power with constant current. It is intended that the runway lights, especially PAPI, has lighting in certain light brightness / intensity that we want according to the specified taping. At this time, CCR in Lombok International Airport has been using SCADA. Unfortunately for controlling and monitoring CCR on a runway lights especially PAPI can only be done in the control room, so engineers had to stand by in the control room. By given this design, android is expected to replace the SCADA that can be accessed remotely, no matter where technicians are located. Moreover, when the state requires you to change the CCR step, the technician can control CCR through android system in technician`s smartphone once monitor the CCR output current without having to stand by in the control room.

2018 ◽  
Vol 21 (6) ◽  
pp. 54-64
Author(s):  
Alexander V. Kechin ◽  
Alexander V. Levin ◽  
Sergei P. Khaliutin ◽  
Boris V. Zhmurov

The article deals with the issue of providing electric power to the first category receivers in the emergency mode of the power supply systems operation of perspective and modernized aircraft. The analysis of the published scientific works performed both in Russia and abroad, and aimed at solving problems of analyzing abnormal operations mode, synthesizing power supply systems and controlling them in order to prevent dangerous consequences is carried out. The authors considered the ingenious technical solutions aimed at providing the necessary quality power supply for the first category receivers in the emergency operation modes of the aircraft power supply systems for the safe completion of flight and landing. The research analysis and generalization of data on the technical characteristics of units and devices developed by the world's leading manufacturers of aviation equipment and used as emergency sources of electrical power on board modern civil aviation aircraft has been completed. The advantages and disadvantages of each technical solution are determined, as well as limitations to the area of their application are formed. The analysis of perspective emergency sources of the electric power including those, which previously were not applied in aviation because of their insufficient technical perfection, for example, hydrogen electrochemical generators is carried out. Based on the performed analysis, a solution which allows improving the operating modes of the electrical batteries is proposed. The offered solution makes it possible to increase the reliability and durability of electrical batteries, as well as the power supply duration of the first category receivers from them.


Author(s):  
B. Lonia ◽  
N. K. Nayar ◽  
S. B. Singh ◽  
P. L. Bali

The agricultural operations in India are suffering from a serious problem of shortage of electrical power on one side and economic and effective disposal of agriwaste stuff on the other. India being agriculture based country, 70% of its main income (share in GDP) comes from agriculture sector. Any enhancement of income from this sector is based upon adequate supply of basic inputs in this sector. Regular and adequate power supply is one such input. But, the position of power supply in our country defies both these characteristics. With a major portion of power produced being sent to the industrial and urban consumers, there is a perennial shortage of power in the agriculture sector. Consequently, there is an emergent need to produce more power in order to fulfil the needs of this sector effectively. One way of accomplishing this is setting up captive, preferably rural based, small power generation plants. In these power plants, instead of water-head, diesel oil or coal, we can use agri-residue to produce electricity. One such power plant (1–2 MW capacity) can satisfy the power need of 25 to 40 nearby villages. The agriwaste like rice straw, sugarcane-trash, coir-pith, peanut shells, wheat stalks & straw, cottonseed, stalks and husk, soyabean stalks, maize stalks & cobs, sorghum. Bagasse, wallnut shells, sunflower seeds, shells, hulls and kernels and coconut husk, wastewood and saw dust can be fruitfully utilized in power generation. This stuff is otherwise a waste and liability and consumes a lot of effort on its disposal; in addition to being a fire and health hazard. Agriwaste stuff which at present is available in abundance and prospects of its utilization in producing energy are enormous. This material can be procured at reasonably low rates from the farmers who will thus be benefited economically, apart from being relieved of the responsibility of its disposal. Agri-residue has traditionally been a major source of heat energy in rural areas in India. It is a valuable fuel even in the sub-urban areas. Inspite of rapid increase in the supply of, access lo and use of fossil fuels, agri-residue is likely to continue to play an important role, in the foreseeable future. Therefore, developing and promoting techno-economically-viable technologies to utilize agri-residue efficiently should be a persuit of high priority. Though there is no authentic data available with regard to the exact quantity of agricultural and agro-industrial residues, its rough estimate has been put at about 350 mt per annum. It is also estimated that the total cattle refuse generated is nearly 250 mt per year. Further, nearly 20% of the total land is under forest cover, which produces approximately 50 mt of fuel wood and with associated forest waste of about 5 mt.(1). Taking into account the utilization of even a portion (say 30%) of this agri-residue & agro-industrial waste as well as energy plantation on one million hectare (mha) of wastelands for power generation through bioenergy technologies, a potential of some 18000 MW of power has been estimated. From the foregoing, it is clear that there is an enormous untapped potential for energy generation from agri-residue. What is required is an immediate and urgent intensification of dedicated efforts in this field, with a view to bringing down the unit energy cost and improving efficiency and reliability of agri-waste production, conversion and utilisation, leading to subsequent saving of fossil fuels for other pressing applications. The new initiatives in national energy policy are most urgently needed to accelerate the social and economic development of the rural areas. It demands a substantial increase in production and consumption of energy for productive purposes. Such initiatives are vital for promoting the goals of sustainability. cleaner production and reduction of long-term risks of environmental pollution and consequent adverse climatic changes in future. A much needed significant social, economic and industrial development has yet to take place in large parts of rural India; be it North, West, East or South. It can be well appreciated that a conscious management of agri-residue, which is otherwise a serious liability of the farmer, through its economic conversion into electric power can offer a reasonably viable solution to our developmental needs. This vision will have to be converted into a reality within a decade or so through dedicated and planned R&D work in this area. There is a shimmering promise that the whole process of harvesting, collection, transport and economic processing and utilisation of agri-waste can be made technically and economically more viable in future. Thus, the foregoing paras amply highlight the value of agri-residue as a prospective source of electric power, particularly for supplementing the main grid during the lean supply periods or peak load hours and also for serving the remote areas in the form of stand-alone units giving a boost to decentralised power supply. This approach and option seems to be positive in view of its potential contribution to our economic and social development. No doubt, this initiative needs to be backed and perused rigorously for removing regional imbalances as well as strengthening National economy. This paper reviews the current situation with regards to generation of agriwaste and its prospects of economic conversion into electrical power, technologies presently available for this purpose, and the problems faced in such efforts. It emphasizes the need for an integrated approach to devise ways and means for generating electrical power from agriwaste; keeping in mind the requirements of cleaner production and environmental protection so that the initiative leads to a total solution.


2015 ◽  
Vol 36 (1) ◽  
pp. 109-130
Author(s):  
Andrzej Gębura ◽  
Tomasz Tokarski

AbstractThe article addresses in a complex way the problem of cooperation between the on-board electric power sources of an aircraft with its on-board electric network. The authors paid special attention to conditions related to correct switching of the on-board electric power sources. Structural protection of the electric power sources against harmful impact of loads, and of the loads against incorrectly operating sources, as well as certain methods to counteract such phenomena, are discussed. Exploring these relations will enable the user to undertake actions which can reduce the failure rate of the on-board electrical power network, and ensure power supply to the electrical loads under all flight conditions. Their correct operation determines correct operation of the on-board electrical power network. The authors tried to discuss all the problems in the most universal way possible, so the deliberations presented here could be helpful in analyzing defects in various aircrafts.


1989 ◽  
Vol 7 (5) ◽  
pp. 328-336
Author(s):  
David Denny

The downtrend in electrical output, 10-14% 1977-79 to 6% 1979-84, was reversed to 7.4% between 1980 and 1987 when 35,000 Mw of capacity was added, transmission networks were expanded and regional grids linked. Part of this success arose from policies that replaced a monolithic system of bureaucratic planning to involvement of local interests and decentralization. Chinese organizations have also been able to take advantage of foreign technology and investment. Nevertheless, industrial output only reached 75-80% of its potential due to inadequate electric power supply.


2014 ◽  
Vol 530-531 ◽  
pp. 1093-1099
Author(s):  
Jia Zhi Yang ◽  
Sheng Li Yi ◽  
Fei Yang ◽  
Cun Bo Jiang ◽  
Xi Le Wang ◽  
...  

LED driver plays an important role in unleashing many advantages of LED, such as high efficiency, long life-time. A constant current fly-back LED driver based on TOP222 is designed in this paper, and the transformer of the constant current power supply and the constant current feedback circuit are deeply researched. The experiment shows that, the output current of the LED driver is 1A, the output power is 10W, the power supply works in constant voltage mode within the low load situation. The result shows that the driver featured with good stability, constant-current characteristic, and high efficiency, is capable for driving LED.


2019 ◽  
Vol 124 ◽  
pp. 05068
Author(s):  
A Fedotov ◽  
R Misbakhov ◽  
N Chernova ◽  
K Bakhteev ◽  
A Akhmetshin

In autonomous electric power supply systems of remote areas of the country where there are no centralized electric power supply, diesel generator units (DGU), and gas piston installations (GPI) is used as a source of electrical power. Selection of their nominal power determined load value, for which the preliminary calculation using the standard values. Researches of electric power profiles for apartment and public buildings of the Republic of Tatarstan showed a significant difference from the current regulatory values. At present, the regions are granted the right to independently set specific loads for such objects. The article proposes a method for selecting the power of autonomous power plants for actual loads for urban and rural settlements.


Author(s):  
E. I. Gracheva ◽  
A. N. Alimova

In the article it is devoted the analysis and researches of origins and values of possible errors from not accounting of the main defining characteristics when calculating losses of the electric power on shop networks of a low tension. It is proved that in case of determination of losses of the electric power in lines of shop networks it is necessary to consider influence of the following parameters of the equipment: the heating of conductors caused by passing of current of loading through conductors and ambient temperature; resistance of contact joints of switching devices and their number; type of the load graph; ambient temperatures. The diagram of a shop network and daily load graphs of customers of one of the enterprises is researched. Errors of calculations of losses of the electric power are calculated and the analysis of influence of parameters of the equipment on value of losses of the electric power is carried out. The absence of reliable information about elements of shop networks of a low tension and not accounting of the determining leads to an error 5 - 80% in case of computation of losses of the electric power in the systems of industrial electrical power supply.


Sign in / Sign up

Export Citation Format

Share Document