scholarly journals Selected Problems In Controlling On-Board Direct And Alternating Current Systems

2015 ◽  
Vol 36 (1) ◽  
pp. 109-130
Author(s):  
Andrzej Gębura ◽  
Tomasz Tokarski

AbstractThe article addresses in a complex way the problem of cooperation between the on-board electric power sources of an aircraft with its on-board electric network. The authors paid special attention to conditions related to correct switching of the on-board electric power sources. Structural protection of the electric power sources against harmful impact of loads, and of the loads against incorrectly operating sources, as well as certain methods to counteract such phenomena, are discussed. Exploring these relations will enable the user to undertake actions which can reduce the failure rate of the on-board electrical power network, and ensure power supply to the electrical loads under all flight conditions. Their correct operation determines correct operation of the on-board electrical power network. The authors tried to discuss all the problems in the most universal way possible, so the deliberations presented here could be helpful in analyzing defects in various aircrafts.

2018 ◽  
Vol 16 ◽  
pp. 03004 ◽  
Author(s):  
Lucjan Setlak ◽  
Rafał Kowalik

Based on the mathematical model of synchronous electric machine, basing on permanent magnets, presented in this paper, the key importance of alternator AC power sources in the form of generator (for conventional aircraft) and in the form of integrated unit starter/AC synchronous generator S/G AC (with respect to advanced aircraft concept in the field of more/all electric power MEA/AEA) was highlighted. In addition, through the analysis and selected simulations of the power supply system of a modern aircrafts, sources of onboard electrical energy (synchronous generator, integrated unit starter/AC generator) were located in board autonomic power system ASE (EPS, PES). Key components of this system are the electro-energetic power system EPS and the energo-electronic power system PES. Additionally, the analysis and exemplary simulations of key electricity sources based on mathematical models have contributed to highlighting the main practical applications in line with the trend of a more electric aircraft.


2018 ◽  
Vol 21 (6) ◽  
pp. 54-64
Author(s):  
Alexander V. Kechin ◽  
Alexander V. Levin ◽  
Sergei P. Khaliutin ◽  
Boris V. Zhmurov

The article deals with the issue of providing electric power to the first category receivers in the emergency mode of the power supply systems operation of perspective and modernized aircraft. The analysis of the published scientific works performed both in Russia and abroad, and aimed at solving problems of analyzing abnormal operations mode, synthesizing power supply systems and controlling them in order to prevent dangerous consequences is carried out. The authors considered the ingenious technical solutions aimed at providing the necessary quality power supply for the first category receivers in the emergency operation modes of the aircraft power supply systems for the safe completion of flight and landing. The research analysis and generalization of data on the technical characteristics of units and devices developed by the world's leading manufacturers of aviation equipment and used as emergency sources of electrical power on board modern civil aviation aircraft has been completed. The advantages and disadvantages of each technical solution are determined, as well as limitations to the area of their application are formed. The analysis of perspective emergency sources of the electric power including those, which previously were not applied in aviation because of their insufficient technical perfection, for example, hydrogen electrochemical generators is carried out. Based on the performed analysis, a solution which allows improving the operating modes of the electrical batteries is proposed. The offered solution makes it possible to increase the reliability and durability of electrical batteries, as well as the power supply duration of the first category receivers from them.


2018 ◽  
Vol 10 (0) ◽  
pp. 1-4
Author(s):  
Mariam Saghatelyan ◽  
Marija Meišutovič-Akhtarieva

At present, in Armenia, hydraulic resources of slow-flowing rivers allow to solve the problem of power supply to small consumers rather efficiently. The electric power generated in small hydropower plants has the lowest prime cost in comparison with that of the power generated by other renewable and traditional power sources. At their construction, in contrast to powerful hydropower plants, the ecological damage (land flooding, destruction of fish farming, the change in the balance of the local climatic condition, etc) are practically excluded. In the present work, issues on applying different types of electric generators in small hydroenergetics are considered. The main advantages, disadvantages and also recommendations on applying electrical generators at their utilization in small hydropower plants are introduced. The developed external damper system for the synchronous hydro aggregate is introduced.


Sensors ◽  
2022 ◽  
Vol 22 (1) ◽  
pp. 357
Author(s):  
Imene Yahyaoui ◽  
Natalia Vidal de la Peña

This paper proposes an energy management strategy (EMS) for a hybrid stand-alone plant destined to supply controllable loads. The plant is composed of photovoltaic panels (PV), a wind turbine, a diesel generator, and a battery bank. The set of the power sources supplies controllable electrical loads. The proposed EMS aims to ensure the power supply of the loads by providing the required electrical power. Moreover, the EMS ensures the maximum use of the power generated by the renewable sources and therefore minimizes the use of the genset, and it ensures that the batteries bank operates into the prefixed values of state of charge to ensure their safe operation. The EMS provides the switching control of the switches that link the plant components and decides on the loads’ operation. The simulation of the system using measured climatic data of Mostoles (Madrid, Spain) shows that the proposed EMS fulfills the designed objectives.


Author(s):  
B. Lonia ◽  
N. K. Nayar ◽  
S. B. Singh ◽  
P. L. Bali

The agricultural operations in India are suffering from a serious problem of shortage of electrical power on one side and economic and effective disposal of agriwaste stuff on the other. India being agriculture based country, 70% of its main income (share in GDP) comes from agriculture sector. Any enhancement of income from this sector is based upon adequate supply of basic inputs in this sector. Regular and adequate power supply is one such input. But, the position of power supply in our country defies both these characteristics. With a major portion of power produced being sent to the industrial and urban consumers, there is a perennial shortage of power in the agriculture sector. Consequently, there is an emergent need to produce more power in order to fulfil the needs of this sector effectively. One way of accomplishing this is setting up captive, preferably rural based, small power generation plants. In these power plants, instead of water-head, diesel oil or coal, we can use agri-residue to produce electricity. One such power plant (1–2 MW capacity) can satisfy the power need of 25 to 40 nearby villages. The agriwaste like rice straw, sugarcane-trash, coir-pith, peanut shells, wheat stalks & straw, cottonseed, stalks and husk, soyabean stalks, maize stalks & cobs, sorghum. Bagasse, wallnut shells, sunflower seeds, shells, hulls and kernels and coconut husk, wastewood and saw dust can be fruitfully utilized in power generation. This stuff is otherwise a waste and liability and consumes a lot of effort on its disposal; in addition to being a fire and health hazard. Agriwaste stuff which at present is available in abundance and prospects of its utilization in producing energy are enormous. This material can be procured at reasonably low rates from the farmers who will thus be benefited economically, apart from being relieved of the responsibility of its disposal. Agri-residue has traditionally been a major source of heat energy in rural areas in India. It is a valuable fuel even in the sub-urban areas. Inspite of rapid increase in the supply of, access lo and use of fossil fuels, agri-residue is likely to continue to play an important role, in the foreseeable future. Therefore, developing and promoting techno-economically-viable technologies to utilize agri-residue efficiently should be a persuit of high priority. Though there is no authentic data available with regard to the exact quantity of agricultural and agro-industrial residues, its rough estimate has been put at about 350 mt per annum. It is also estimated that the total cattle refuse generated is nearly 250 mt per year. Further, nearly 20% of the total land is under forest cover, which produces approximately 50 mt of fuel wood and with associated forest waste of about 5 mt.(1). Taking into account the utilization of even a portion (say 30%) of this agri-residue & agro-industrial waste as well as energy plantation on one million hectare (mha) of wastelands for power generation through bioenergy technologies, a potential of some 18000 MW of power has been estimated. From the foregoing, it is clear that there is an enormous untapped potential for energy generation from agri-residue. What is required is an immediate and urgent intensification of dedicated efforts in this field, with a view to bringing down the unit energy cost and improving efficiency and reliability of agri-waste production, conversion and utilisation, leading to subsequent saving of fossil fuels for other pressing applications. The new initiatives in national energy policy are most urgently needed to accelerate the social and economic development of the rural areas. It demands a substantial increase in production and consumption of energy for productive purposes. Such initiatives are vital for promoting the goals of sustainability. cleaner production and reduction of long-term risks of environmental pollution and consequent adverse climatic changes in future. A much needed significant social, economic and industrial development has yet to take place in large parts of rural India; be it North, West, East or South. It can be well appreciated that a conscious management of agri-residue, which is otherwise a serious liability of the farmer, through its economic conversion into electric power can offer a reasonably viable solution to our developmental needs. This vision will have to be converted into a reality within a decade or so through dedicated and planned R&D work in this area. There is a shimmering promise that the whole process of harvesting, collection, transport and economic processing and utilisation of agri-waste can be made technically and economically more viable in future. Thus, the foregoing paras amply highlight the value of agri-residue as a prospective source of electric power, particularly for supplementing the main grid during the lean supply periods or peak load hours and also for serving the remote areas in the form of stand-alone units giving a boost to decentralised power supply. This approach and option seems to be positive in view of its potential contribution to our economic and social development. No doubt, this initiative needs to be backed and perused rigorously for removing regional imbalances as well as strengthening National economy. This paper reviews the current situation with regards to generation of agriwaste and its prospects of economic conversion into electrical power, technologies presently available for this purpose, and the problems faced in such efforts. It emphasizes the need for an integrated approach to devise ways and means for generating electrical power from agriwaste; keeping in mind the requirements of cleaner production and environmental protection so that the initiative leads to a total solution.


Author(s):  
Hisayoshi Sugiyama

Abstract Pulsed power network is proposed for reliable and low loss electrical power distribution among various type of power sources and consumers. The proposed scheme is a derivative of power packet network so far investigated that has affinity with dispersion type power sources and has manageability of energy coloring in the process of power distribution. In addition to these advantages, the proposed scheme has system reliability and low loss property because of its intelligent operation performed by individual nodes and direct relaying by power routers. In the proposed scheme, power transmission is decomposed into a series of electrical pulses placed at specified power slots in continuous time frames that are synchronized over the network. The power slots are pre-reserved based on information exchanges among neighboring nodes following inherent algorithm of the proposed scheme. Because of this power slots reservation based on decentralized intelligence, power pulses are directly transmitted from various power sources to consumers with the least power dissipation even though a partial failure occurs in the network. The network operations with the proposed scheme is simulated to confirm the algorithms for the power slots reservation and to evaluate the power network capacity.


2017 ◽  
Vol 2 (2) ◽  
pp. 138-147
Author(s):  
Kustori Kustori ◽  
Zuris Nur Faiza Ningrum

Constant Current Regulator is a power supply used in the world of aviation for the provision of electric power in airport lighting systems. The electrical power supplied to the airport lighting lamp is maintained to provide power with constant current. It is intended that the runway lights, especially PAPI, has lighting in certain light brightness / intensity that we want according to the specified taping. At this time, CCR in Lombok International Airport has been using SCADA. Unfortunately for controlling and monitoring CCR on a runway lights especially PAPI can only be done in the control room, so engineers had to stand by in the control room. By given this design, android is expected to replace the SCADA that can be accessed remotely, no matter where technicians are located. Moreover, when the state requires you to change the CCR step, the technician can control CCR through android system in technician`s smartphone once monitor the CCR output current without having to stand by in the control room.


2021 ◽  
Vol 94 ◽  
pp. 156-171
Author(s):  
V. A. Sednev ◽  

Introduction. Over the past twenty years, the most severe natural and man-made disasters have occurred in various regions of the country and the world, as a result of which people were deprived of housing. The increase in the number, scale and duration of the consequences of emergencies related to the violation of the conditions of normal living of people requires the creation of temporary field accommodation points for the affected population, which create and serve rescue formations. At the same time, in the complex of tasks aimed at the life support of the population and rescue units in field temporary accommodation facilities, their electric power supply plays an important role. However, the established practice of calculating the electrical loads of stationary objects by methods based on data on separate electrical receivers makes it difficult to determine them for a field temporary location of people due to the lack of reliable information on its electrical receivers, which leads to significant errors in calculations, irrational composition of the electrical supply system and the use of its elements against the background of restrictions in the use of local energy resources and infrastructure facilities, which themselves may experience difficulties with reliable power supply due to the limited capacity of local power systems. The purpose of the study. Electric power supply and electric power safety of field temporary accommodation points of the affected population and rescue units, ensuring the required reliability of electric power supply, maximizing its efficiency in conditions of possible resource constraints and minimizing the influence of the uncertainty factor when planning power consumption. Research methods. The main provisions of the calculation of electrical loads, systems theory, set theory, probability theory and the apparatus of mathematical statistics. The results of the study. A methodology has been developed that allows to justify the power consumption of a temporary field accommodation facility for people, while the construction of its life support power supply system is carried out in accordance with the available consumers, taking into account their composition, area and other factors affecting the organization of the power supply system and the construction of consumers. Conclusion. The scientific and methodological approach to the choice of methods for calculating the electrical loads of the life support system of the affected population and rescue units during field deployment is substantiated, which also allows to resolve the contradiction between the need to organize the power supply of their life support and the lack of reasonable standards of power consumption of life support facilities and methods of their calculation. Key words: temporary field accommodation, life support, electric energy consumers, electric power supply, organization.


Sign in / Sign up

Export Citation Format

Share Document