scholarly journals Application of Activated Afzelia Africana and Acacia Albida Carbon for Removal of Pollutants in Textile Wastewater

2021 ◽  
Vol 04 (12) ◽  
Author(s):  
Femi K. Owofadeju ◽  
Keyword(s):  
Removal Efficiency ◽  
Wood Species ◽  
Organic Contaminants ◽  
Contact Time ◽  
Low Cost ◽  
Textile Wastewater ◽  
Batch Adsorption ◽  
Textile Effluents ◽  
Acacia Albida ◽  
Afzelia Africana

Adsorption of contaminants in textile wastewater onto activated carbon derived from two wood species has been studied using batch-adsorption techniques. This study was carried out to examine the removal efficiency of the low-cost adsorbent (Afzelia africana) AFA and (Acacia albida) ACA for the removal of heavy metals and other organic contaminants from textile effluents. The influence of contact time and adsorbent dose kept constant on the adsorption process was also studied. Removal efficiency increased with increase in contact time. The two adsorbents had an average removal efficiency of 60% at 90mins contact time for Zn. The ACA had higher removal efficiency for chromium at all contact times than AFA except at 120mins contact time where there existed a slight difference in the removal efficiency between the two adsorbents. Removal efficiency of iron was high between 58.18- 70.52% and 72.75-75.86% for AFA and ACA carbon respectively. This showed that iron had high affinity to the adsorbents surface. It was observed that AFA exhibited highest removal efficiency for nitrate at all contact times as compared to ACA. Results indicated that the freely abundant, locally available, low-cost adsorbent derived from the two wood species could be treated as being economically viable for the removal of contaminants from textile effluents.

scholarly journals Batch Sorption Experiments: Langmuir and Freundlich Isotherm Studies for the Adsorption of Textile Metal Ions onto Teff Straw (Eragrostis tef) Agricultural Waste

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Mulu Berhe Desta
Keyword(s):  
Heavy Metals ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Low Cost ◽  
Agricultural Waste ◽  
Equilibrium Concentration ◽  
Eragrostis Tef ◽  
Batch Adsorption ◽  
Textile Effluents

Adsorption of heavy metals (Cr, Cd, Pb, Ni, and Cu) onto Activated Teff Straw (ATS) has been studied using batch-adsorption techniques. This study was carried out to examine the adsorption capacity of the low-cost adsorbent ATS for the removal of heavy metals from textile effluents. The influence of contact time, pH, Temperature, and adsorbent dose on the adsorption process was also studied. Results revealed that adsorption rate initially increased rapidly, and the optimal removal efficiency was reached within about 1 hour. Further increase in contact time did not show significant change in equilibrium concentration; that is, the adsorption phase reached equilibrium. The adsorption isotherms could be fitted well by the Langmuir model. The value in the present investigation was less than one, indicating that the adsorption of the metal ion onto ATS is favorable. After treatment with ATS the levels of heavy metals were observed to decrease by 88% (Ni), 82.9% (Cd), 81.5% (Cu), 74.5% (Cr), and 68.9% (Pb). Results indicate that the freely abundant, locally available, low-cost adsorbent, Teff straw can be treated as economically viable for the removal of metal ions from textile effluents.

scholarly journals HOGLA LEAF AS A POTENTIAL BIO-ADSORBENT FOR THE TREATMENT OF REACTIVE DYES IN TEXTILE EFFLUENTS

2020 ◽  
Vol 4 (12) ◽  
pp. 1-7
Author(s):  
Abdul Khalque ◽  
Shaikh Ahammed ◽  
Saquib Khan ◽  
Rabiul Awual ◽  
K.Ayaz Rabbani ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Contact Time ◽  
Reactive Dyes ◽  
Textile Wastewater ◽  
Complete Removal ◽  
Reactive Dye ◽  
Textile Effluents ◽  
Typha Angustata ◽  
Colored Wastewater ◽  
Wastewater Samples

A new bio-adsorbent to remove reactive dyes from textile effluent was investigated in the present study. The adsorbent was the leaves of locally available hogla plant (Typha angustata). Initially, sunfix yellow, a reactive dye widely used in textile effluents, was used to check the removal efficiency in terms of contact time, pH of dye solution and adsorbent dosage. Complete removal (100%) of dye was achieved at adsorbent/dye ratio of 2300:1 at pH 10 with 180 minutes contact time. The adsorbent was then applied to deep colored, raw textile wastewater samples and it was found that 2.3 g of adsorbent was able to convert 100 mL of deep colored wastewater to transparent water at pH 10. Additionally, treatment by the adsorbent resulted in significant decreases in pH, BOD, COD, TS, TDS and TSS of wastewater, while improving the DO level.

Utilisation of Biomass and Hybrid Biochar from Elephant Grass and Low Density Polyethylene for the Competitive Adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from Aqueous Media

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Lois T. Arowoyele ◽  
Samuel Ogunniyi ◽  
Comfort A. Adeyanju ◽  
Folasade M. Oladipo-Emmanuel ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Contact Time ◽  
Competitive Adsorption ◽  
Adsorption Process ◽  
Aqueous Media ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Elephant Grass

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.

scholarly journals Multivariate Optimization of Pb2+ Adsorption onto Ethiopian Low-Cost Odaracha Soil Using Response Surface Methodology

Molecules ◽  
2021 ◽  
Vol 26 (21) ◽  
pp. 6477
Author(s):  
Yohanis Birhanu ◽  
Seyoum Leta
Keyword(s):  
Central Composite Design ◽  
Response Surface ◽  
Removal Efficiency ◽  
Interaction Effect ◽  
Contact Time ◽  
Low Cost ◽  
Design Model ◽  
Lead Ions ◽  
Experimental Result ◽  
Central Composite

Lead pollution is a severe health concern for humankind. Utilizing water contaminated with lead can cause musculoskeletal, renal, neurological, and fertility impairments. Therefore, to remove lead ions, proficient, and cost-effective methods are imperative. In this study, the Odaracha soil which is traditionally used by the local community of the Saketa District was used as a novel low-cost technology to adsorb lead ions. Odaracha adsorbent was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption process followed the batch adsorption experiment. The response surface method was implemented to derive the operating variables’ binary interaction effect and optimize the process. According to the study’s experimental result, at optimum experimental conditions Odaracha adsorbent removes 98.17% of lead ions. Based on the result of the central composite design model, the Pb2+ ion removal efficiency of Odaracha was 97.193%, indicating an insignificant dissimilarity of the actual and predicted results. The coefficient of determination (R2) for Pb2+ was 0.9454. According to the factors’ influence indicated in the results of the central composite design model, all individual factors and the interaction effect between contact time and pH has a significant positive effect on lead adsorption. However, other interaction effects (contact time with dose and pH with dose) did not significantly influence the removal efficiency of lead ions. The adsorption kinetics were perfectly fitted with a pseudo-second-order model, and the adsorption isotherm was well fitted with the Freundlich isotherm model. In general, this study suggested that Odaracha adsorbent can be considered a potential adsorbent to remove Pb2+ ions and it is conceivable to raise its effectiveness by extracting its constituents at the industrial level.

scholarly journals Application of treated eggplant peel as a low-cost adsorbent for water treatment toward elimination of Pb2+: Kinetic modeling and isotherm study

2018 ◽  
Vol 36 (3-4) ◽  
pp. 1112-1143 ◽  
Author(s):  
Mohammad Hossein Karimi Darvanjooghi ◽  
Seyyed Mohammadreza Davoodi ◽  
Arzu Y Dursun ◽  
Mohammad Reza Ehsani ◽  
Iman Karimpour ◽  
...  
Keyword(s):  
Contact Time ◽  
Low Cost ◽  
Standard Free Energy ◽  
Chemical Properties ◽  
Entropy Change ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Standard Entropy ◽  
Adsorption Parameters ◽  
Adsorbent Dose

In this study, treated eggplant peel was used as an adsorbent to remove Pb2+ from aqueous solution. For this purpose batch adsorption experiments were performed for investigating the effect of contact time, pH, adsorbent dose, solute concentrations, and temperature. In order to assess adsorbent’s physical and chemical properties, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy were used. The results showed that the adsorption parameters for reaching maximum removal were found to be contact time of 110 min, adsorbent dose of 0.01 g/ml, initial lead(II) concentration of 70 ppm, pH of 4, and temperature of 25°C. Moreover, for the experiments carried out at pH > 4 the removal occurred by means of significant precipitation as well as adsorption. Furthermore, these results indicated that the adsorption followed pseudo-second-order kinetics model implying that during the adsorption process strong bond between lead(II) and chemical functional groups of adsorbent surface took place. The process was described by Langmuir model (R2 = 0.99; maximum adsorption capacity 88.33 mg/g). Also thermodynamics of adsorption was studied at various temperatures and the thermodynamic parameters including equilibrium constant (K), standard enthalpy change, standard entropy change, and standard free energy changes were obtained from experimental data.

scholarly journals Biosorption of Colour, Copper and Zinc in Textile Wastewater using Carbonized Orange Peels

2021 ◽  
Vol 6 (2) ◽  
Author(s):  
P. H. Kumaraiah
Keyword(s):  
Adsorption Isotherms ◽  
Contact Time ◽  
Textile Wastewater ◽  
Second Order ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Copper Adsorption ◽  
Orange Peels ◽  
Copper And Zinc ◽  
Pseudo Second Order

Recently, low-cost adsorbents from sustainable sources are required for the remediation of textile wastewater. Carbonized Orange Peels (COPs) was utilized in remediating colour, Zinc and Copper from textile wastewater. The initial and final pH, colour and trace metals’ composition of the wastewater used were determined for the adsorption processes. Batch adsorption experiment was carried out on COPs and textile wastewater’s mixture to find effects of COP’s dosage, agitation, pH and contact time on the colour, Zinc and Copper’s removal from the wastewater. The adsorption isotherms and kinetic studies were conducted using Langmuir, Freundlich, Pseudo-first-order and Pseudo-second-order models. Findings established that the optimum removal of colour, Zinc and Copper respectively occurred at an adsorbent dosage of 2.5, 0.5 and 3.0 g/100ml, pH of 10, 4 and 2, rotating speed of 100, 250 and 250 rpm, contact time of 40, 60, and 40 mins. The adsorption isotherms revealed only copper adsorption as optimum and well fitted Langmuir isotherm. Pseudo-second-order kinetic model best suited adsorption data of the colour and metal ions with high correlation coefficient (R2) exceeding 0.95. Conclusively, COPs is effective in remediating the colour, copper and zinc from the wastewater, thus, recommended as suitable adsorbent for treatment of textile wastewater

scholarly journals Methylene Blue Adsorption from aqueous solution by low cost vine-wood biomass

2021 ◽  
Author(s):  
Rachida Souidi ◽  
yasmina khane ◽  
Lahcen Belarbi ◽  
Smain Bousalem
Keyword(s):  
Methylene Blue ◽  
Sulfuric Acid ◽  
Contact Time ◽  
Adsorption Process ◽  
Low Cost ◽  
Sulfuric Acid Concentration ◽  
Analytical Techniques ◽  
Batch Adsorption ◽  
Adsorbent Dosage ◽  
Adsorption Desorption

Abstract In this work, the sawdust of vine wood (VW) was treated with sulfuric acid and used to adsorb methylene blue (MB) from aqueous solutions via a batch adsorption process. The characteristics of the adsorbent were determined by various analytical techniques such as Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) and Brunauer−Emmett−Teller (BET) N2 adsorption−desorption isotherms. The effects of various experimental parameters including sulfuric acid concentration, particle size of the adsorbent, pH of the solution, contact time, initial concentration, adsorbent dosage and temperature on adsorption of MB by activating sawdust were systematically investigated. The experimental results showed that the adsorption efficiency was increased with contact time and adsorbent dosage. The maximum removal efficiency was found after 180 min of solid/liquid contact with adsorbent doses of 1 g/l for sawdust. The isotherm and kinetic experimental data for MB adsorption on VW sawdust were best-fitted by Langmuir models and Pseudo-second-order, respectively. The calculated values of the entropy (ΔS°), enthalpy (ΔH°) and Gibbs energy (ΔG°) indicated that the adsorption process was exothermic in nature. These results suggest that the activated sawdust can be employed as a low-cost and environmentally friendly adsorbent for the treatment of wastewaters containing dyes.

TREATMENT OF TEXTILE WASTE WATER AND SORPTION OF LEAD USING CHITOSAN FROM BIO-WASTE

2021 ◽  
Vol 6 (1) ◽  
pp. 50-62
Author(s):  
K.F.K. Oyedeko ◽  
A.S. Akinyanju ◽  
M.K. Lasisi ◽  
R.J. Patinvoh
Keyword(s):  
Waste Water ◽  
Correlation Coefficient ◽  
Langmuir Isotherm ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Textile Wastewater ◽  
Textile Effluent ◽  
Batch Adsorption ◽  
Textile Waste ◽  
Textile Waste Water

Textile effluent contains different organic and inorganic pollutants, among these are COD and heavy metals such as lead (Pb), chromium (Cr), cadium (Cd), and copper (Cu) used for the production of color pigments. In this study the adsorption capacity of chitosan produced from snail shells as an adsorbent for the treatment of textile effluent and for the removal of lead (Pb2+) from waste water carried out. Batch experiments were performed to study the treatment of textile waste water and the adsorption of lead Pb2+ion unto chitosan. The effect of various experimental parameters (adsorbent dose, contact time and temperature) was studied, and optimal conditions were determined. Batch adsorption study on textile waste water showed 96.9 % COD removal was achieved for carbon dosage of 15mg carbon/100ml of textile wastewater solution. The equilibrium data were analyzed with Langmuir, Freundlich, Temkin, Elovich, Florry Huggins, Jovanovic, Harkin Jura and Dubinin–Radushkevich (DRK) adsorption models. Freundlich isotherm yielded the best fit to the experimental equilibrium adsorption data with a correlation coefficient (R2 ) of 0.991. The adsorption intensity is 1.68. This was closely followed by Langmuir Isotherm with a correlation coefficient (R2 ) of is 0.943. The maximum monolayer coverage (Qo) from Langmuir isotherm model was determined to be 50.51mg/g, KL (Langmuir isotherm constant) is 0.00374L/mg, RL (the separation factor) is 0.217 indicating that the equilibrium sorption was favorable. Adsorption kinetics data for sorption of Pb2+ion unto chitosan were analyzed using the pseudo first order, pseudo second order and intra particle diffusion models. The results indicated that the adsorption kinetic data were best described by pseudo secondorder model. For the thermodynamic studies, the enthalpy change, ΔH°, and the entropy change, ΔS°, for the adsorption processes are -18.10 kJ/mol and -0.0652KJ/mol K respectively. The free energy, ΔG° for the process are 2186.39 J/mol, 3071.761 J/mol, 3689.615J/mol and 4153.032 J/mol at 303K, 313K, 323 K and 333K respectively. The results of thermodynamic parameters evaluated showed that the process was non spontaneous and exothermic in nature. The results show that chitosan can be used as an alternative low-cost adsorbent for treatment of textile effluent and the removal of COD and lead from wastewater.

scholarly journals CuO Coated Electrochemically Generated Textile Wastewater Sludge and CuO Coated GAC as Potential Nano-adsorbents for Color Removal from Real Textile Wastewater

2018 ◽  
Vol 34 (4) ◽  
pp. 2144-2151
Author(s):  
Srikantha H, S. Mahesh ◽  
Sahana M
Keyword(s):  
Contact Time ◽  
Cell Voltage ◽  
Textile Wastewater ◽  
Xrd Analysis ◽  
Operating Conditions ◽  
Wastewater Sludge ◽  
Color Removal ◽  
Batch Adsorption ◽  
Batch Mode ◽  
Nano Adsorbent

A laboratory scale setup was used to remove color from real textile wastewater (TWW) using nano CuO coated electrochemically generated sludge and nano CuO coated GAC. ECC studies were conducted in batch-mode to generate sludge treating real TWW using pre-optimized 4SS electrodes using a 1.5L reactor operated at cell voltage of 18V and current density 180A/m2 at an agitation speed of 500rpm for 60min electrolysis time. SEM, FTIR and XRD analysis confirmed CuO material successfully coated/decorated on electrochemically generated sludge of size ~0.3-0.5mm and GAC of size ~0.5mm. To check the color removal efficiencies from TWW the batch adsorption studies were conducted for adsorbent dose, stirring time and pH. The optimal operating conditions achieved at pH-4, dose of 0.6g/L and 30min contact time for CuO-sludge nano-adsorbent achieving 50-55% color removal. Similarly, for CuO-GAC nano-adsorbent the optimal conditions obtained at pH-4, 0.5 g/L dose and 20min contact time achieving ~100% removal.

scholarly journals Sequestered capture and desorption of hexavalent chromium from solution and textile wastewater onto low cost Heinsia crinita seed coat biomass

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Folasegun A. Dawodu ◽  
Benjamin M. Akpan ◽  
Kovo G. Akpomie
Keyword(s):  
Seed Coat ◽  
Contact Time ◽  
Low Cost ◽  
Textile Wastewater ◽  
Ion Concentration ◽  
Point Of Zero Charge ◽  
Chromium Vi ◽  
Biosorption Process ◽  
Operational Variables ◽  
Pseudo Second Order

AbstractDue to the high cost associated with the treatment of effluents containing heavy metals in the environment, the continuous untreated release of effluent containing chromium from textile industries has resulted in several adverse effects to plants, ecological systems and humans. This research therefore focused on the use of a low cost, biodegradable Heinsia crinita seed coat (HCSC) material for the biosorption of chromium(VI) from aqueous and textile contaminated effluent. The biosorbent was characterized for specific surface area, surface morphology, pH point of zero charge and surface functional groups. Operational variables influences such as biosorbent dose, pH, temperature, initial Cr(VI) ion concentration and contact time on biosorption process was tested. The optimum biosorption parameter was obtained at pH 2.0, adsorbent dosage 0.25 g and contact time of 30 min. From sorption analysis, the pseudo-second-order model best described the attenuation kinetics. Concerning biosorption equilibrium, the results suggested that the adsorption isotherm obeyed the Freundlich model. Langmuir maximum monolayer biosorption capacity of 231.7 mg/g was higher than most biosorbents for Cr(VI) ion. The thermodynamic data showed a physical, spontaneous and endothermic biosorption process. HCSC showed high percentage desorption > 90% using 0.1 M HNO3 and was efficient after three cycles of regeneration studies. The results showed HCSC biomass as a suitable candidate for abstraction of Cr(VI) ion from contaminated solution and textile effluent.

Sign in / Sign up

Export Citation Format

Share Document