scholarly journals The Proposed Heating and Cooling System in the CH2 Building and Its Impact on Occupant Productivity

2012 ◽  
Vol 5 (2) ◽  
pp. 32-39 ◽  
Author(s):  
Lu Aye ◽  
Robert Fuller
Keyword(s):  
Cooling System ◽  
Heating System ◽  
Climatic Conditions ◽  
Internal Space ◽  
Commercial Building ◽  
Cooling Systems ◽  
Heating And Cooling ◽  
Air Movement ◽  
Occupant Comfort ◽  
Change Material

Melbourne's climatic conditions demand that its buildings require both heating and cooling systems. In a multi-storey office building , however, cooling requirements will dominate. How the internal space is cooled and ventilation air is delivered will significantly impact on occupant comfort. This paper discusses the heating and cooling systems proposed for the CH2building. The paper critiques the proposed systems against previous experience, both internationally and in Australia. While the heating system employs proven technologies, less established techniques are proposed for the cooling system. Air movement in the shower towers, for example, is to be naturally induced and this has not always been successful elsewhere. Phase change material for storage of "coolth" does not appear to have been demonstrated previously in a commercial building, so the effectiveness of the proposed system is uncertain. A conventional absorption chiller backs up the untried elements of the cooling system, so that ultimately occupant comfort should not be compromised .

Active Thermal Regulation Systems for Footwear: Development of New Innovative Technologies

2021 ◽  
Vol 893 ◽  
pp. 57-63
Author(s):  
João Ferraz ◽  
Sónia Silva ◽  
Helena Fernandes ◽  
Sarah Bogas ◽  
Bruno Vale ◽  
...  
Keyword(s):  
Cooling System ◽  
Heating System ◽  
Thermal Dissipation ◽  
Thermal Regulation ◽  
Peltier Effect ◽  
Cooling Systems ◽  
Heating And Cooling ◽  
Peltier Modules ◽  
Technological Challenge ◽  
Printing Techniques

This work aims to develop safety shoes, with thermal regulation systems, namely innovative heating and cooling systems. Heating system was developed using printing techniques; and cooling system was developed using the integration of Peltier modules in the shoe structure. These materials are based on the Peltier effect, in which, when an electric current is applied, the heat moves from one face to the other, being subsequently removed using thermal dissipation methods. This effect allows an active cooling. Given the high technological challenge of integrating cooling systems into footwear, this paper will present only developments related to cooling system.

scholarly journals Investigation of parameters affecting the optimum thermal insulation thickness for buildings in hot and cold climates

2020 ◽  
Vol 24 (5 Part A) ◽  
pp. 2891-2903
Author(s):  
Ahmet Canbolat ◽  
Ali Bademlioglu ◽  
Kenan Saka ◽  
Omer Kaynakli
Keyword(s):  
Cooling System ◽  
Heating System ◽  
Climatic Conditions ◽  
Graphical Form ◽  
Insulation Material ◽  
Factors Affecting ◽  
Heating And Cooling ◽  
Present Worth ◽  
Insulation Thickness ◽  
Optimum Insulation Thickness

This paper investigates the factors affecting the optimum insulation thickness and its pay-back period, such as heating and cooling energy requirements of building, lifetime, present worth factor, costs of insulation material and installation, costs of energy sources for heating and cooling, heating and cooling system efficiencies, and solar radiation. For this purpose, by considering two cities characterizing the hot and cold climatic conditions, the optimum insulation thickness and its pay-back period have been calculated and a detailed parametric analysis has been carried out. To achieve practical results, the ranges of the parameters considered in the study include the values typically reported in the literature. The variations in the optimum insulation thickness and the pay-back period with all parameters are presented in graphical form. Finally, order of importance and contribution ratios of the examined parameters on the optimum insulation thickness are determined with the help of Taguchi method. It is found that heating degree-days is the most efficient parameter on the optimum insulation thickness with an impact ratio of 27.33% of the total effect while the least efficient parameter is the efficiency of heating system with an impact ratio of 3.21%.

scholarly journals Analysis of the Impact of the Construction of a Trombe Wall on the Thermal Comfort in a Building Located in Wrocław, Poland

Atmosphere ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 761 ◽  
Author(s):  
Jagoda Błotny ◽  
Magdalena Nemś
Keyword(s):  
Temperature Increase ◽  
Cooling System ◽  
Renewable Energy Sources ◽  
Heating System ◽  
Wall Material ◽  
Ansys Fluent ◽  
Cooling Period ◽  
Heating And Cooling ◽  
Trombe Wall ◽  
The Impact

Changes in climate, which in recent years have become more and more visible all over the world, have forced scientists to think about technologies that use renewable energy sources. This paper proposes a passive solar heating and cooling system, which is a Trombe wall located on the southern facade of a room measuring 4.2 m × 5.2 m × 2.6 m in Wrocław, Poland. The studies were carried out by conducting a series of numerical simulations in the Ansys Fluent 16.0 environment in order to examine the temperature distribution and air circulation in the room for two representative days during the heating and cooling period, i.e., 16 January and 15 August (for a Typical Meteorological Year). A temperature increase of 1.11 °C and a temperature decrease in the morning and afternoon hours of 2.27 °C was obtained. Two options for optimizing the passive heating system were also considered. The first involved the use of triple glazing filled with argon in order to reduce heat losses to the environment, and for this solution, a temperature level that was higher by 8.50 °C next to the storage layer and an increase in the average room temperature by 1.52 °C were achieved. In turn, the second solution involved changing the wall material from concrete to brick, which resulted in a temperature increase of 0.40 °C next to the storage layer.

Personal Heating/Cooling System Using Peltier

2020 ◽  
Author(s):  
Amanie Abdelmessih ◽  
Andre Alvarez ◽  
Joshua Gonzalez ◽  
Timothy Gooch ◽  
Adrian Gutierrez ◽  
...  
Keyword(s):  
Law Enforcement ◽  
Cooling System ◽  
Family Members ◽  
Lithium Ion ◽  
Weather Conditions ◽  
Heating System ◽  
The Elderly ◽  
Hazardous Substances ◽  
Biological Warfare ◽  
Heating And Cooling

Abstract Common quibbles in most homes are the temperature setting. Some family members are comfortable with cooler temperature settings, while other family members prefer warmer temperature settings. Not to mention the fragile elderly and some medical situations require different temperature settings for those individuals than the rest of the occupants of the space. The purpose of this article is to outline a research where we created a working prototype of a portable, effective Peltier cooling/heating system. Peltier, or thermoelectric modules, are devices that use the differences in electric voltages to create a difference in temperature between two flat opposite sides of the thin module. The system can easily be switched between the heating and cooling modes. In contrast to compression refrigeration systems it produces a very low level of noise output. Also, the system is portable, small in size, and light weight. Another advantage of using the Peltier system is it does not employ hazardous substances such as hydrochlorofluorocarbons, but uses water. While a system such as this could be beneficial in the day to day comfort of any individual, it could prove vital to the survival of the elderly and medically vulnerable individuals. This heating/cooling system can enhance the performance of military, particularly in biological warfare suites, and law enforcement personnel who find themselves in less than desirable weather conditions. This uniquely designed Peltier system is compact, and lightweight. Cooling/heating through the system would be achieved by the exchange of heat between the user and a custom designed vest. The system is powered by lithium ion battery pack. Details of this unique design are discussed in the article. Also, the testing and results are reported, and discussed.

Clothing sets with thermoregulation function for mine rescuers

2019 ◽  
Vol 574 (7) ◽  
pp. 21-25
Author(s):  
Krzysztof Łężak ◽  
Grażyna Bartkowiak ◽  
Agnieszka Greszta ◽  
Anna Dąbrowska ◽  
Sylwia Krzemińska ◽  
...  
Keyword(s):  
Heat Dissipation ◽  
Ad Hoc ◽  
Cooling System ◽  
Heat Stroke ◽  
Climatic Conditions ◽  
The Body ◽  
Hot Environment ◽  
Additional Equipment ◽  
Extreme Hazards ◽  
Change Material

Mine rescuers’ work is associated with many extreme hazards, including difficult climatic conditions. At the same time, the clothing and cooling systems that they use are still too ineffective in terms of dissipating excess heat from the body, which sometimes leads to overheating and consequent death of a rescuer due to heat stroke. These factors constituted an impulse to undertake work towards the development of new, effective in terms of cooling and protective properties, clothing sets for mine rescuers. This publication presents two alternative clothing sets developed in the RESCLO project, made up of outer protective clothing, used along with one of the two underwear variants, ie. underwear with inserts with phase change material (PCM) or underwear with air-fed cooling system from the air receiver. These solutions ensure compatibility with the additional equipment of the rescuer and provide the possibility of ad hoc configuration of clothing sets depending on the conditions of the action and the threats. Laboratory tests have shown that depending on the tested variant, the thermoregulatory solutions used allow for heat dissipation from the rescuer's body at the level of up to 30 W/m2, which will have a positive effect on the safety of mine rescuers during the operation and extend their safe working time in the underground hot environment.

scholarly journals Long-term Green Innovation Opportunities Within the Hungarian District Heating Sector Towards 2030

2016 ◽  
Vol 4 (1) ◽  
pp. 12-24
Author(s):  
Balint Horvath ◽  
Maria Borocz ◽  
Sandor Zsarnoczai ◽  
Csaba Fogarassy
Keyword(s):  
Natural Gas ◽  
District Heating ◽  
Heating System ◽  
Simple Fact ◽  
District Heating System ◽  
Primary Input ◽  
Cooling Systems ◽  
The Public ◽  
Heating And Cooling

Abstract Natural gas is still the primary input of the Hungarian heating and cooling systems, therefore it still makes most of the overheads. One of the main obstacles of a competitive district heating system is the public opinion which still considers this service more expensive than the traditional heating forms. According to the absolute numbers this assumption might be valid but from a more accurate economic perspective, heat production has more aspects to stress. Most people forget about the simple fact that the maintenance costs of natural gas based systems are rather outsourced to the consumer than in the case of district heating. Furthermore, the uneven rate of the fixed and variable costs of this technology does not prove to be optimal for service developments. Investigating the future tendencies highlight that encouraging the efficiency improvement of district heating and the spread of technological innovation in the sector does not belong to the top priorities. Still, avoiding this problem it could lead serious deadweight losses in the case of the heating sector.

scholarly journals Innovative Turbine Intake Air Cooling Systems and Their Rational Designing

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6201
Author(s):  
Andrii Radchenko ◽  
Eugeniy Trushliakov ◽  
Krzysztof Kosowski ◽  
Dariusz Mikielewicz ◽  
Mykola Radchenko
Keyword(s):  
Gas Turbines ◽  
Maximum Rate ◽  
Cooling System ◽  
Ambient Air ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Air Cooling ◽  
Thermal Loads ◽  
Cooling Systems ◽  
Air Cooling System

The efficiency of cooling ambient air at the inlet of gas turbines in temperate climatic conditions was analyzed and reserves for its enhancing through deep cooling were revealed. A method of logical analysis of the actual operation efficiency of turbine intake air cooling systems in real varying environment, supplemented by the simplest numerical simulation was used to synthesize new solutions. As a result, a novel trend in engine intake air cooling to 7 or 10 °C in temperate climatic conditions by two-stage cooling in chillers of combined type, providing an annual fuel saving of practically 50%, surpasses its value gained due to traditional air cooling to about 15 °C in absorption lithium-bromide chiller of a simple cycle, and is proposed. On analyzing the actual efficiency of turbine intake air cooling system, the current changes in thermal loads on the system in response to varying ambient air parameters were taken into account and annual fuel reduction was considered to be a primary criterion, as an example. The improved methodology of the engine intake air cooling system designing based on the annual effect due to cooling was developed. It involves determining the optimal value of cooling capacity, providing the minimum system sizes at maximum rate of annual effect increment, and its rational value, providing a close to maximum annual effect without system oversizing at the second maximum rate of annual effect increment within the range beyond the first maximum rate. The rational value of design cooling capacity provides practically the maximum annual fuel saving but with the sizes of cooling systems reduced by 15 to 20% due to the correspondingly reduced design cooling capacity of the systems as compared with their values defined by traditional designing focused to cover current peaked short-term thermal loads. The optimal value of cooling capacity providing the minimum sizes of cooling system is very reasonable for applying the energy saving technologies, for instance, based on the thermal storage with accumulating excessive (not consumed) cooling capacities at lowered current thermal loads to cover the peak loads. The application of developed methodology enables revealing the thermal potential for enhancing the efficiency of any combustion engine (gas turbines and engines, internal combustion engines, etc.).

scholarly journals Numerical investigation of the energy flexibility of different heating and cooling systems

2019 ◽  
Vol 111 ◽  
pp. 06001 ◽  
Author(s):  
Evangelia Loukou ◽  
Mingzhe Liu ◽  
Hicham Johra ◽  
Per Heiselberg ◽  
Bianca A. Dia ◽  
...  
Keyword(s):  
Energy Use ◽  
Numerical Study ◽  
Renewable Energy Sources ◽  
Heating System ◽  
Economic Benefits ◽  
Comfort Level ◽  
Grid System ◽  
Cooling Systems ◽  
Load Shifting ◽  
Heating And Cooling

The significant expansion of intermittent renewable energy sources can compromise the stability of energy grids due to the mismatch between instantaneous energy use and production. Buildings have a large potential for energy storage and demand-side management, which can offer energy flexibility to a Smart Grid system. Smart control of heating, ventilation and air conditioning systems is a great solution for improving flexible energy use, load shifting and power peak shaving. This numerical study compares the energy flexibility potential of three different heating and cooling systems implemented in a nearly zero-energy office building. The energy flexibility strategy consists in the modulation of heating / cooling indoor temperature set points according to an energy price signal. The energy flexibility assessment was performed based on the energy shifting ability, indoor thermal comfort level and economic benefits. This article establishes a better understanding of the flexibility potential of common and innovative heating / cooling technologies. Lindab Solus system has the highest load shifting ability with a flexibility index of 67.41%, followed by the radiator heating system, scoring a 59.92%, and the underfloor heating system with 56.65%. It is clear that the selection between different heating/ cooling systems can have a great impact on the energy flexibility of the grid system.

A Glance on Radiant Cooling Technology for Heating and Cooling for Residential and Commercial Building Application

2020 ◽  
Vol 07 (3&4) ◽  
pp. 13-19
Author(s):  
Shubham S Kulkarni ◽  
Keyword(s):  
Energy Consumption ◽  
Life Cycle Cost ◽  
Cooling System ◽  
Radiant Heating ◽  
Commercial Building ◽  
Heating And Cooling ◽  
Radiant Cooling ◽  
Air Conditioning Systems ◽  
Increasing Temperature ◽  
Chilled Ceiling

As we know that nowadays due to the hot and humid weather and the increasing temperature the high amount of energy consumption is used for the heating & cooling purpose in residential as well as in commercial building for air conditioning systems. To overcome this problem and to reduce the energy consumption as well as good thermal comfort to people in the indoor environment, use the radiant heating & cooling system is a better way. This concept is used to cool or heat the room and absorbs the indoor sensible heat by thermal radiation. The system removes heat by using less energy and more energy-efficient. This system uses water as a medium to cool or heat the room space. There are three types discussed in these papers for cooling & heating. In this paper, we did an overall study regarding radiant heating and cooling systems. It reduces the energy lost due to the duct leakage. It also has a lower life cycle cost compared to conventional. In this paper, we have reviewed how to reduce energy consumption and give thermal comfortable air-condition through radiant cooling and chilled ceiling panel system.

Sign in / Sign up

Export Citation Format

Share Document